Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “comminution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Steady state, exposure age, and growth of agglutinates in lunar soils

Mineralogical evolution of lunar soils as a function of agglutinate content can be described with the help of a two-component model. Steady-state condition of exposed lunar soils can be achieved only by the balance of comminution, agglutination, and replenishment processes. Rate of replenishment depends on the meteoroid flux and the nature of the substrate which varies both in space and time. Rates of agglutination and comminution depend not only on the micrometeoritic flux but also on the chemical and modal composition of an exposed soil. It is concluded from modeling the above that steady-state condition of lunar soils is independent of its maturity or exposure age. Agglutinate content of a lunar soil can be used to estimate the relative exposure age of the soil only if the soil is in a non-steady-state condition.

Basu, A.↗
NASA NTRS1981

Asteroidal agglutinate formation and implications for asteroidal surfaces

The possible role of spallation on the free surfaces of target bodies in asteroid surface evolution in the presence of colliding bodies is considered. The ease of impact melt formation is discussed based on the results of shock recovery experiments, and a difference between collisions with dense, nonporous targets and with porous, particulate powders is demonstrated. It is shown that agglutinate-type glasses can be produced at impact velocities of 5 km/sec, but only in highly comminuted, porous targets and not in dense rocks. The apparent lack of agglutinate-type glasses on asteroid surfaces is explained in terms of coarse-grained asteroidal surfaces acting as dense, nonporous bedrock. It is argued that a possible mechanism inhibiting asteroidal surface comminution so as to inhibit melt formation and the effects of micrometeoroid impacts can be represented by collision processes with finite-sized targets rather than with a semi-infinite half-space as in the case of the moon, which give rise to spallation products rather than crater ejecta.

Horz, F.↗
NASA NTRS1984

Grain size evolution and fractionation trends in an experimental regolith

The communication of blocky planetary surfaces into fine-grained regoliths was simulated by impacting a fragmental gabbro target 200 times with stainless steel projectiles. It is found that the comminution efficiency of the surfaces changes with time, being highest in the early stages of regolith formation and decreasing gradually. The relationship between mean grain size and cumulative energy is not linear. Individual, fine-grained regolith components can be generated very early from relatively large progenitor fragments without going through intermediate-size fractions. Impact comminution is capable of producing fractionated fines as postulated by Papike et al. (1982). The role of grain-size selective, lateral transport to explain the fractionated nature of lunar regolith fines may have been overestimated in the past.

Horz, F.↗
NASA NTRS1983

Condensation of chondrules

Analysis of current experimental results concerned with the kinetic constraints on chondrule formation showed that the major physical properties of chondrules could have been produced by direct condensation of metastable liquid silicates droplets from a hot gas in the primordial nebula. It is argued that such a condensation process would have to be followed by crystallization, accretion, and partial comminution of the droplets. The chemical mechanisms driving this process are described, including: nucleation constraints on comminution and crystallization; slow transformations and chemical reactions in chain silicates; and the slow diffusion of ions. It is shown that the physical mechanisms for chondrule condensation are applicable to a broad spectrum of chondrule sources.

Blander, M.↗
NASA NTRS1985

Chemistry and petrology of Apollo 12 drive tube 12027

Papike et al. (1982) have provided a summary of previous petrologic and chemical studies of the lunar regolith, taking into account samples from all of the Apollo and Luna sites. On the basis of these studies, an understanding is obtained of the processes which form and characterize the lunar regolith. It is found that comminution of local lithologies by meteorite impact and soil mixing are the most important regolith-forming processes. On the basis of grain size studies of Apollo 14 surface, trench, and drive tube soils, Simin et al. (1982) and Laul et al. (1982) concluded that comminution of local lithologies and vertical soil mixing processes are most important in the formation of the soils at that site. In the present investigation, this study of chemistry and petrology of lunar soils is extended to the Apollo 12 drive tube 12027. This drive tube provides an opportunity to study lunar soil from a depositional environment involving a location at the rim of a crater. The chemical and petrologic data are found to be consistent and suggest three stratigraphic units in the 12027 core.

Smith, M. R.↗
NASA NTRS1986

The size distributions of fragments ejected at a given velocity from impact craters

The mass distribution of fragments that are ejected at a given velocity for impact craters is modeled to allow extrapolation of laboratory, field, and numerical results to large scale planetary events. The model is semi-empirical in nature and is derived from: (1) numerical calculations of cratering and the resultant mass versus ejection velocity, (2) observed ejecta blanket particle size distributions, (3) an empirical relationship between maximum ejecta fragment size and crater diameter, (4) measurements and theory of maximum ejecta size versus ejecta velocity, and (5) an assumption on the functional form for the distribution of fragments ejected at a given velocity. This model implies that or planetary impacts into competent rock, the distribution of fragments ejected at a given velocity is broad, e.g., 68% of the mass of the ejecta at a given velocity contains fragments having a mass less than 0.1 times a mass of the largest fragment moving at that velocity. The broad distribution suggests that in impact processes, additional comminution of ejecta occurs after the upward initial shock has passed in the process of the ejecta velocity vector rotating from an initially downward orientation. This additional comminution produces the broader size distribution in impact ejecta as compared to that obtained in simple brittle failure experiments.

Okeefe, J. D.↗
NASA NTRS1987

Physical and chemical modification of the surface of Venus by windblown particles

The results of simulations of the Venusian surface environment involving windblown grains are presented which show that significant chemical and physical changes may occur even in the slow-moving winds recorded on Venus. The edges of grains beome worn and shed comminuted debris, which collects on weathered surfaces and grains alike. The resulting transfer of material from loose grains to bedrock surfaces (and vice versa) could yield misleading results on rock composition; moreover, the generation of comminuted debris would enhance chemical reactions that could affect the composition of the atmosphere. The results are thus relevant in assessing rates of surface degradation, the evolution of small-scale surface features as seen in images returned from the Soviet Venera missions, and in the interpretation of compositional data for surface materials.

Greeley, Ronald↗
NASA NTRS1987

The size distributions of fragments ejected at a given velocity from impact craters

The mass distribution of fragments that are ejected at a given velocity for impact craters is modeled to allow extrapolation of laboratory, field, and numerical results to large scale planetary events. The model is semi-empirical in nature and is derived from: (1) numerical calculations of cratering and the resultant mass versus ejection velocity, (2) observed ejecta blanket particle size distributions, (3) an empirical relationship between maximum ejecta fragment size and crater diameter, (4) measurements and theory of maximum ejecta size versus ejecta velocity, and (5) an assumption on the functional form for the distribution of fragments ejected at a given velocity. This model implies that for planetary impacts into competent rock, the distribution of fragments ejected at a given velocity is broad, e.g., 68 percent of the mass of the ejecta at a given velocity contains fragments having a mass less than 0.1 times a mass of the largest fragment moving at that velocity. The broad distribution suggests that in impact processes, additional comminution of ejecta occurs after the upward initial shock has passed in the process of the ejecta velocity vector rotating from an initially downward orientation. This additional comminution produces the broader size distribution in impact ejecta as compared to that obtained in simple brittle failure experiments.

O'Keefe, John D.↗
NASA NTRS1988

The effects of impact velocity on the evolution of experimental regoliths

Fragmental targets consisting of a coarse-grained gabbro were subjected to multiple impacts with stainless-steel spheres at 0.7, 1.4, and 1.9 km/s in order to investigate the effects of impact velocity on the generation and evolution of experimental regoliths. Although the low-velocity impactors were shown to be more efficient in terms of both mass comminution and the creating of new surfaces, the comminuted material formed by the faster projectiles possessed smaller mean grain sizes and larger proportions of fine-grained debris. The 2-4 mm material was found in all cases to exhibit a mass excess relative to the adjacent size fractions.

Cintala, Mark J.↗
NASA NTRS1999

The Enigmatic Longevity of Granular Materials on Mars: The Case for Geologically Episodic Dune Formation

Martian sand dunes are concentrated in vast sand seas in the circumpolar belt of the planet's northern hemisphere, but they are also pervasive over the whole planet. Their occurrence is to be expected on a super-arid planetary surface subjected to boundary layer drag from a continually active atmosphere. Whilst their occurrence is to be expected, their survival is enigmatic. But the enigma only arises if the martian system is considered similar to Earth's --where sand is moved highly frequently, more or less on a seasonal basis. Experimentally it is readily demonstrated that active sand will soon wear down to small grains and eventually diminish to below the critical sand size required to sustain dune formation. According to conventional wisdom, sand moves at higher speeds on Mars than on Earth, and if it were to move as frequently as it does on Earth, then the dune-forming sand population should have long since disappeared, given the great longevity of the martian aeolian system (Sagan coined the term "kamikaze" grains to express this disappearance). No supply of sand could keep pace with this depletion, especially in light of the fact that Mars does not have very active weathering, nor significant crustal differentiation. On Earth, plate tectonics, magmatic activity, and general crustal differentiation over geological time have produced great concentrations of quartz crystals in the continental crustal masses. Not only are these quartz grains chemically and mechanically resilient, they are about the right size for being transported by either wind or water. Add to this, the geologically recent contribution of glacial grinding, and it is easy to see why there are dune field on Earth. So what are the martian dunes composed of, and how does the material survive the eons of attrition? In addition to experimental demonstrations of sand comminution in laboratory aeolian simulations, the problem can be approached from first principles. Sagan showed that by simple considerations of material strength versus mechanical work applied to the material, comminution to sub-sand size would be inevitable. Another semi-analytical approach might be taken by considering that the archetypal aeolian sand surface texture is an irregularly pitted ("frosted") surface composed of chipping hollows approximately 10 microns in diameter, 5 microns deep. Their volume = about 250 cubic microns, or about 1/25000 of the volume of a 100 micron diameter dune grain. Because a saltating grain always strikes another grain, then two surfaces are impacted. Thus each grain undergoes two impacts for every one saltation leap, when the impact statistics are considered for a closed dune system (it can be calculated that a grain can never undergo <1 impact, and never >2 per saltation leap). Hence, if we conservatively assume that there is damage to a grain each time it bounces, but with the minimum damage of only 2 microscopic craters per impact, then approximately 12,500 impacts are required to completely eliminate the grain. Of course, it would require only a fraction of this amount to reduce the grain to below sand size. A grain will make only several tens of saltation leaps on the stoss side of a dune before becoming buried on the lee slope. The dune then has to move its full length before the grain is exhumed again for abrasion. Even with this hiatus in transport, it is easy to see that terrestrial dunes need resupplying with sand in order to survive. In recent theoretical work it has been shown that martian aeolian transport may be initiated with high-speed grains, but this converts to a lower energy dynamic transport equilibrium in which a reptation population dominates grain transport (on Earth, at least half of the flux is by reptation and creep). On Mars, therefore, average grain speeds may be lower than those on Earth, or at least comparable. This would permit greater longevity for martian sands, but it would not go far enough to solve the survival problem. It may, however, explain why martian dunes are about the same size as terrestrial dunes. If martian saltation leaps were significantly longer than on Earth (as usually assumed), then a dune's lee slope would have to be correspondingly longer in order to trap the sand; this would scale up the whole dune structure. But with shorter trajectories in a reptation population, larger dunes would be unnecessary. Additional information is contained in the original.

Marshall, J.↗
NASA NTRS1999

The MECA Payload as a Dust Analysis Laboratory on the MSP 2001 Lander

In a companion abstract, the "Mars Environmental Compatibility Assessment" (MECA) payload for Mars Surveyor Program 2001 (MSP 2001) is described in terms of its capabilities for addressing exobiology on Mars. Here we describe how the same payload elements perform in terms of gathering data about surface dust on the planet. An understanding of the origin and properties of dust is important to both human exploration and planetary geology. The MECA instrument is specifically designed for soil/dust investigations: it is a multifunctional laboratory equipped to assess particulate properties with wet chemistry, camera imagery, optical microscopy (potentially with LTV fluorescence capability), atomic force microscopy (AFM; potentially with mineral-discrimination capabilities), electrometry, active & passive external materials-test panels, mineral hardness testing, and electrostatic & magnetic materials testing. Additionally, evaluation of soil chemical and physical properties as a function of depth down to about 50 cm will be facilitated by the Lander/MECA robot arm on which the camera (RAC) and electrometer are mounted. Types of data being sought for the dust include: (1) general textural and grain-size characterization of the soil as a whole --for example, is the soil essentially dust with other components or is it a clast-supported material in which dust resides only in the clast interstices, (2) size frequency distribution for dust particles in the range 0.01 to 10.00 microns, (3) particle-shape distribution of the soil components and of the fine dust fraction in particular, (4) soil fabric such as grain clustering into clods, aggregates, and cemented/indurated grain amalgamations, as well as related porosity, cohesiveness, and other mechanical soil properties, (5) cohesive relationship that dust has to certain types of rocks and minerals as a clue to which soil materials may be prime hosts for dust "piggybacking", (6) particle, aggregate, and bulk soil electrostatic properties, (7) particle hardness, (8) particle magnetic properties, (9) bulk dust geochemistry (solubility, reactivity, ionic and mineral species). All of these quantities are needed in order for the human exploration program to make assessments of hazards on Mars, and to better enable the production on earth, of soil/dust simulants that can act as realistic test materials in terms of those properties that render dust a contaminant.Such properties include the small grain size that enables penetration of space-suit joints, mechanical interfaces and bearings, seals, etc., and presents difficulty for filtration systems. Size also plays a critical role in the potential for lung disease in long-term habitats. The properties of grain shape and hardness are important parameters in determining the abrasiveness of dust as it enters mechanical systems, or bombards helmet visors and habitat windows in dust-laden winds. Adhesive electrostatic and magnetic properties of dust will be prime causes of contamination of space suits and equipment. Contamination causes mechanical malfunction, tracking of dirt into habitats, "piggybacking" of toxins on dust into habitats, changes in albedo and efficiency of solar arrays and heat exchangers, and changes in electrical conductivity of suit surfaces and other materials that may have specific safety requirements regarding electrical conductivity. Other potentially hazardous properties of dust include the possibility of high solubility of some component grains (rendering them reactive), and toxicity of some materials --grains of superoxidants and heavy metals (there is always the slim, but not inconceivable possibility of biogenic components such as spores). Because Mars has no active surface aqueous regime, volcanic emissions, meteoritic debris, weathering products, and photochemical products of Mars have nowhere to go except reside in the surface; there are few mechanical or chemical (buffering) processes to remove the accumulation of eons. From a planetology perspective, there are many enigmatic issues relating to dust and the aeolian regime in general. MECA will be able to address many questions in this area. For example, if MECA determines a particular particle size distribution (size and sorting values), it will be possible to make inferences about the origin of the dust - - is it all aeolian, or a more primitive residue of weathering, volcanic emissions, and meteoritic gardening? Trenching with the Lander/MECA robot arm will enable local stratigraphy to be determined in terms of depositional rates, amounts and cyclicity in dust storms and/or local aeolian transport. Grain shape will betray the origin of the dust fragments as being the product of recent or ancient weathering, or the comminution products of aeolian transport --the dust-silt ratio might be a measure of aeolian comminution energy. Additional information is contained in the original.

Marshall, J.↗
DOE OSTI2020

Method and system for preparing polycrystalline group III metal nitride

A process of preparing polycrystalline group III nitride chunks comprising the steps of (a) placing a group III metal inside a source chamber; (b) flowing a halogen-containing gas over the group III metal to form a group III metal halide; (c) contacting the group III metal halide with a nitrogen-containing gas in a deposition chamber containing a foil, the foil comprising at least one of Mo, W, Ta, Pd, Pt, Ir, or Re; (d) forming a polycrystalline group III nitride layer on the foil within the deposition chamber; (e) removing the polycrystalline group III nitride layer from the foil; and (f) comminuting the polycrystalline group III nitride layer to form the polycrystalline group III nitride chunks, wherein the removing and the comminuting are performed in any order or simultaneously.

36 MATERIALS SCIENCE↗
DOE OSTI2026

An Anisotropic Yield and Damage Material Model to Improve the Contact Pressure Analysis in a Biomass Shredding System

Size reduction systems used in biomass processing break biomass into smaller pieces by utilizing the kinetic energy from the sharp rotating blades. Abrasive and/or erosive wear caused by biomass comminution results in blade wear of the sharp edged cutters, deteriorating the process efficiency. Here, this study aims to optimize the blade design and improve the system efficiency by attempting to understand the interactions between the blades and biomass particles. Since real-time monitoring of these interactions is impractical during operation, mechanical simulations offer a viable alternative for investigating the shredding process. Yet, the irregular geometry and complex mechanical properties of biomass—such as the anisotropic nature of woodchips and their nonlinear fracture behavior—pose significant challenges for accurately simulating contact pressure. In this work an anisotropic yield material model, along with a damage initiation and evolution function, is applied to the woodchip particle to study the contact pressure on shredder blade, offering a scientific basis for improved blade design and process efficiency. This approach can be extended to other biomass processing systems with similar anisotropic feedstocks, making it a valuable tool for advancing sustainable biomass utilization.

09 - BIOMASS FUELS↗
DOE OSTI2023

An experiment-informed discrete element modelling study of knife milling for flexural biomass feedstocks

A discrete element method (DEM) based approach is used to study the relationships between material attributes (MAs), processing parameters (PPs), and quality attributes (QAs) for the knife milling of maize stalks. An approximate DEM shape model was conceptualized based on real maize stalks and calibrated based on experimental bending test data for flexural properties (elastic bending stiffness, elastic bending angle limit, elastoplastic ratio, etc.). DEM simulations of maize stalk comminution in a Jordan Reduction Solutions (“JRS”) knife mill were performed to investigate the relationships between the MAs (maize stalk size and breakage stress limit), PPs (impeller rotational speed), and QAs (mass throughput and output particle size distribution (PSD)). The DEM results suggest that stalk length has little influence on mass throughput and PSD, whilst stalks with larger cross sections tend to generate larger sizes of milled particles given the same breakage stress limit. Both the DEM and experimental results show that faster impeller rotation (or higher power) does not necessarily generate higher throughput or smaller output PSD, especially for maize stalks of higher breakage stress limit. The correlations between these MAs, PPs and QAs are found highly stochastic, though breakage stress limit dictates mass throughput, regardless of stalk size. The DEM-predicted output particle size tended to match the experimental data with coarse PSDs based on sieve size but showed weakened fidelity with finer material, indicating the potential for further model improvement.

09 BIOMASS FUELS↗
DOE OSTI2025

On the bulk compaction of brittle granular materials, Part III: Brittle‐to‐ductile transition and yield strength

A new and simple method is presented that enables the estimation of the yield strength (σ y ) of brittle materials (e.g., ceramics, glasses). It results from the combination of sufficiently high-stress compaction of their granular form, postmortem analysis of the crushed particles to identify the critical particle size corresponding to their brittle-to-ductile transition, and the use of a developed and simple analytical expression. Here, this method was an outcome from Part I of this three-paper series. To execute it, a granular brittle material is compacted to a sufficiently high stress, whereby the acting comminution produces both a fraction of particles having a sufficiently small size formed by ductile or plastic-like deformation and a remaining fraction of larger particles formed from brittle fracture. Postmortem microscopy is then used to identify the smallest particle size whose morphology indicates it formed from brittle fracture (d B2D ). The brittle material's σ y can then be estimated using a combination of the d B2D , Kendall's and Griffith's theories, a priori knowledge of the material's fracture toughness (K Ic ), and a fracture mechanics shape factor constant (Y) using σ y = √((32 π K Ic 2 )/(3 Y 2 d B2D )). The method's development and its use to estimate σ y for several vitreous silicates, α-quartzes, and NaCl are provided.

Compaction↗
DOE OSTI2020

Identification of Critical Process Parameters for Knife Milling and Alternative Communication Strategies

An assessment of knife milling operations was performed to identify parameters that require consideration to model wear and degradation of knife blades. A quality-by-design (QbD) paradigm was followed to identify material and feedstock attributes, and processing parameters that impact the quality attributes of the blades used in the comminution of biomass into forms compatible with downstream operations. Based on analytical and experimental observations of knife and tool wear, a QbD model is proposed that considers three wear mechanisms (erosion, abrasion, and gouging) to predict volumetric wear of knife blades and sharpness. These factors, if properly applied, provide a science-based approach to predict the mechanical efficiency of the mill as a function of feedstock properties, knife blade material properties, and processing parameters (feed rate, speed, and design parameters).

09 BIOMASS FUELS↗
DOE OSTI2022

BETO 2021 Peer Review - FCIC Task 5 - Preprocessing

In the study of feedstock variability, this presentation specifically looks at preprocessing processes that will created well-defined and homogenous feedstock from variable biomass resources, in the quest to produce homogeneous intermediates that will be converted into market-ready products. The objective of this stage of the project is to develop science-based design and operation principles informed by TEA/LCA that result in predictable, reliable, and scalable performance of preprocessing unit operations (comminution, fractionation, deconstruction, and real-time imaging).

biomass↗
DOE OSTI2024

Data-driven nonlocal model for fragmentation in the crushing of solids

A technique is proposed for reproducing particle size distributions in three-dimensional simulations of the crushing and comminution of solid materials. The method is designed to produce realistic distributions over a wide range of loading conditions, especially for small fragments. In contrast to most existing methods, the new model does not explicitly treat the small-scale process of fracture. Instead, it uses measured fragment distributions from laboratory tests as the basic material property that is incorporated into the algorithm, providing a data-driven approach. The algorithm is implemented within a nonlocal peridynamic solver, which simulates the underlying continuum mechanics and contact interactions between fragments after they are formed. Finally, the technique is illustrated in reproducing fragmentation data from drop weight testing on sandstone samples.

58 GEOSCIENCES↗