Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “collective mind”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Retractable Sensors for In-Core Service in Material Test Reactors

Material Test Reactors (MTRs) such as the Advanced Test Reactor (ATR) at the Idaho National Laboratory (INL) are used to irradiate nuclear fuels and materials to evaluate their performance after high levels of exposure to a reactor in-core environment. The most critical tests are equipped with instrumentation leads, which allow real-time data collection. However, because of the very harsh environment inside high-power MTR experiments, there are very few sensors that can survive and maintain their calibrated readings for the time periods required to obtain the high neutron doses needed for new fuels and materials qualification. As a result, sometimes sponsoring programs are forced to accept low reliability of sensors, collecting useful data for only part of the experiment duration. The work described herein is based on the observation that MTRs normally run at constant power and the corresponding conditions within reactor experiments typically evolve relatively slowly. Therefore, even one or two measurements per day would provide a complete and representative data set. With this in mind, INL has embarked on a program to develop a mechanism capable of pushing a very small-diameter sensor (typically a thermocouple or optical fiber) into the location to be measured, leave the sensor for roughly 60 seconds to allow it to reach equilibrium and transmit the signal, then pull it up and away from the high neutron flux and high-temperature region. Small-diameter capillary tubes, up to 8 m long, are used to guide the sensors to the appropriate locations. These capillary tubes serve as essentially very deep, thin-walled thermowells. The distance a thermocouple or optical fiber would need to traverse is on the order of 40 - 80 cm. By adopting this infrequent cycling strategy, the thermocouple or optical fiber would spend only a few hours in the high-neutron flux/high-temperature environment over the duration of even the longest irradiation experiment. To date, INL has developed two styles of drive mechanisms. The first is based on counter-rotating wheels which drive the sensors in a manner similar to a small MIG welder. This has the advantage of being able to accommodate a very long insertion length. The second is based on a ball screw drive and has the advantages of positive attachment and being able to move more than one sensor at a time. Both drive mechanisms have been fabricated and tested in a laboratory setting. Both systems can handle hard mineral insulated cable (such as thermocouples) or optical fibers encased in small diameter tube. The sizes tested to date are 1 - 1.6 mm diameter. Work in this area is ongoing with an eye toward demonstration in the Massachusetts Institute of Technology's MITR reactor, followed by deployment in an ATR irradiation experiment.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Retractable Sensors for In-Core Service in Material Test Reactors

Material Test Reactors (MTRs) such as the Advanced Test Reactor (ATR) at the Idaho National Laboratory (INL) are used to irradiate nuclear fuels and materials to evaluate their performance after high levels of exposure to a reactor in-core environment. The most critical tests are equipped with instrumentation leads, which allow real-time data collection. However, because of the very harsh environment inside high-power MTR experiments, there are very few sensors that can survive and maintain their calibrated readings for the time periods required to obtain the high neutron doses needed for new fuels and materials qualification. As a result, sometimes sponsoring programs are forced to accept low reliability of sensors, collecting useful data for only part of the experiment duration. The work described herein is based on the observation that MTRs normally run at constant power and the corresponding conditions within reactor experiments typically evolve relatively slowly. Therefore, even one or two measurements per day would provide a complete and representative data set. With this in mind, INL has embarked on a program to develop a mechanism capable of pushing a very small-diameter sensor (typically a thermocouple or optical fiber) into the location to be measured, leave the sensor for roughly 60 seconds to allow it to reach equilibrium and transmit the signal, then pull it up and away from the high neutron flux and high-temperature region. Small-diameter capillary tubes, up to 8 m long, are used to guide the sensors to the appropriate locations. These capillary tubes serve as essentially very deep, thin-walled thermowells. The distance a thermocouple or optical fiber would need to traverse is on the order of 40 – 80 cm. By adopting this infrequent cycling strategy, the thermocouple or optical fiber would spend only a few hours in the high-neutron flux/high-temperature environment over the duration of even the longest irradiation experiment. To date, INL has developed two styles of drive mechanisms. The first is based on counter-rotating wheels which drive the sensors in a manner similar to a small MIG welder. This has the advantage of being able to accommodate a very long insertion length. The second is based on a ball screw drive and has the advantages of positive attachment and being able to move more than one sensor at a time. Both drive mechanisms have been fabricated and tested in a laboratory setting. Both systems can handle hard mineral insulated cable (such as thermocouples) or optical fibers encased in small diameter tube. The sizes tested to date are 1 – 1.6 mm diameter. Work in this area is ongoing with an eye toward demonstration in the Massachusetts Institute of Technology’s MITR reactor, followed by deployment in an ATR irradiation experiment.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS2018

TCL2 National Campaign Human Factors Brief

The Technology Capability Level-2 National Campaign (TCL2nc) was conducted at six different test-sites located across the USA, during May and June of 2017. The campaign resulted in over 240 data collection flights using 24 different aircraft and involving 23 flight crews. Flights not only varied in duration, but also in the environments and terrains over which they flew. The TCL2nc highlighted beyond visual line of sight (BVLOS) and altitude-stratified operations, and saw five partners bring their own, independently built, UAS Service Supplier (USS) for use during the flight tests. This document presents data collected during the TCL2nc that informs the 'Operator' section of the 'Requirements/Best Practices' from the UTM Technical Capability Matrix and Guidelines to Operate (Rios, version as of March 2017). A review of the data collected indicated that although teams were well qualified on paper (in terms of both completing training and having experience with flying UAS vehicles), greater consideration should be given to the unique perspectives and backgrounds of future UAS operators. Overall, teams looked at a variety of sources for information, including USS client-displays, and participants became more mindful of the need to be aware of other vehicles, highlighting the value of reporting information. Observations found that flight crews' time to respond to a UTM issue depended heavily on the team structure, communication efficiency, and crew procedures. These points are discussed in more detail below.

unmanned vehicles↗
NASA NTRS1998

Modeling of Substitutional Site Preference in Ordered Intermetallic Alloys

We investigate the site substitution scheme of specific alloying elements in ordered compounds and the dependence of site occupancy on compound stoichiometry, alloy concentration. This basic knowledge, and the interactions with other alloying additions are necessary in order to predict and understand the effect of various alloying schemes on the physical properties of a material, its response to various temperature treatments, and the resulting mechanical properties. Many theoretical methods can provide useful but limited insight in this area, since most techniques suffer from constraints in the type of elements and the crystallographic structures that can be modeled. With this in mind, the Bozzolo-Ferrante-Smith (BFS) method for alloys was designed to overcome these limitations, with the intent of providing an useful tool for the theoretical prediction of fundamental properties and structure of complex systems. After a brief description of the BFS method, its use for the determination of site substitution schemes for individual as well as collective alloying additions to intermetallic systems is described, including results for the concentration dependence of the lattice parameter. Focusing on B2 NiAl, FeAl and CoAl alloys, the energetics of Si, Ti, V, Cr, Fe, Co, Ni, Cu, Zr, Nb, Mo, Ru, Hf, Ta and W alloying additions are surveyed. The effect of single additions as well as the result of two simultaneous additions, discussing the interaction between additions and their influence on site preference schemes is considered. Finally, the BFS analysis is extended to ternary L1(sub 2) (Heusler phase) alloys. A comparison between experimental and theoretical results for the limited number of cases for which experimental data is available is also included.

Bozzolo, Guillermo↗
NASA NTRS2012

Chondritic Models of 4 Vesta: Comparison of Data from the Dawn Mission with Predicted Internal Structure and Surface Composition/Mineralogy

While the HEDs provide an extremely useful basis for interpreting data from the Dawn mission, there is no guarantee that they provide a complete vision of all possible crustal (and possibly mantle) lithologies that are exposed at the surface of Vesta. With this in mind, an alternative approach is to identify plausible bulk compositions and use mass-balance and geochemical modelling to predict possible internal structures and crust/mantle compositions and mineralogies. While such models must be consistent with known HED samples, this approach has the potential to extend predictions to thermodynamically plausible rock types that are not necessarily present in the HED collection. Nine chondritic bulk compositions are considered (CI, CV, CO, CM, H, L, LL, EH, EL). For each, relative proportions and densities of the core, mantle, and crust are quantified. This calculation is complicated by the fact that iron may occur in metallic form (in the core) and/or in oxidized form (in the mantle and crust). However, considering that the basaltic crust has the composition of Juvinas and assuming that this crust is in thermodynamic equilibrium with the residual mantle, it is possible to calculate a single solution to this problem for a given bulk composition. Of the nine bulk compositions tested, solutions corresponding to CI and LL groups predicted a negative metal fraction and were not considered further. Solutions for enstatite chondrites imply significant oxidation relative to the starting materials and these solutions too are considered unlikely. For the remaining bulk compositions, the relative proportion of crust to bulk silicate is typically in the range 15 to 20% corresponding to crustal thicknesses of 15 to 20 km for a porosity-free Vesta-sized body. The mantle is predicted to be largely dominated by olivine (greater than 85%) for carbonaceous chondrites, but to be a roughly equal mixture of olivine and pyroxene for ordinary chondrite precursors. All bulk compositions have a significant core, but the relative proportions of metal and sulphide can be widely different. Using these data, total core size (metal+ sulphide) and average core densities can be calculated, providing a useful reference frame within which to consider geophysical/gravity data of the Dawn mission. Further to these mass-balance calculations, the MELTS thermodynamic calculator has been used to assess to what extent chondritic bulk compositions can produce Juvinas-like liquids at relevant degrees of partial melting/crystallization. This work will refine acceptable bulk compositions and predict the mineralogy and composition of the associated solid and liquid products over wide ranges of partial melting and crystallization, providing a useful and self-consistent reference frame for interpretation of the data from the VIR and GRaND instruments onboard the Dawn spacecraft.

Toplis, M. J.↗
NASA NTRS1989

Possible use of pattern recognition for the analysis of Mars rover X-ray fluorescence spectra

On the Mars rover sample-return mission, the rover vehicle will collect and select samples from different locations on the Martian surface to be brought back to earth for laboratory studies. It is anticipated that an in situ energy-dispersive X-ray fluorescence (XRF) spectrometer will be on board the rover. On such a mission, sample selection is of higher priority than in situ quantitative chemical anlaysis. With this in mind, a pattern recognition technique is proposed as a simple, direct, and speedy alternative to detailed chemical analysis of the XRF spectra. The validity and efficacy of the pattern recognition technique are demonstrated by the analyses of laboratory XRF spectra obtained from a series of geological samples, in the form both of standardized pressed pellets and as unprepared rocks. It is found that pattern recognition techniques applied to the raw XRF spectra can provide for the same discrimination among samples as a knowledge of their actual chemical composition.

Yin, Lo I↗
NASA NTRS1994

FOC SV support and science data analysis

The main activity of NASA grant NAG5-1733 has been the study of Planetary Nebulae in the Magellanic Clouds through observations using the ESA Faint Object Camera conducted during Hubble Space Telescope (HST) Observing Cycles 1 and 2 in the pre-Costar era and in Cycle 4 with Costar and the FOC. A table of the observations obtained during these observing periods is attached along with figures showing the final images. Both the table and the figures are intended for publication later this year in the Astrophysical journal. Work that had been carried out under this grant included: astrometric measurement of ground-based images and preparation of detailed observing proposals; re-calibration of FOC images; deconvolution; and data analysis and measurement. The work has resulted in two papers, the first already published and the second in preparation by Blades, Osmer and Barlow. A reprint of the first paper is attached. The second paper will enlarge upon the results described in the first paper, bearing in mind the much larger sample of objects. Finally, the recently acquired images in Cycle 4 with the corrected optics will allow us to make direct and quantitative comparison between the pre- and post-correction for FOC. This work will be carried out under a separate grant. All the observations concerning Planetary Nebulae as described in an earlier status report have been collected and measured. In addition, a preliminary study of the photometric response of the FOC was begun under this grant but not completed because the analysis of the Cycle 2 Planetary Nebulae took much longer and was much more difficult than originally envisaged (due to the spherical aberration problem). However, because our data covers a long time period, we shall be able to deduce the photometric properties now using the actual PN themselves. This work will be carried out under a separate grant.

Blades, J. Chris↗
NASA NTRS1996

In Situ Mineralogical Analysis of Planetary Materials Using X-Ray Diffraction and X-Ray Fluorescence

Remote observations of Mars have led scientists to believe that its early climate was similar to that of the early Earth, having had abundant liquid water and a dense atmosphere. One of the most fascinating questions of recent times is whether simple bacterial life developed on Mars (as it did on the Earth) during this early element period. Analyses of SNC meteorites have broadened considerably our knowledge of the chemistry of certain types of Martian rocks, underscoring the tantalizing possibility of early hydrothermal systems and even of ancient bacterial life. Detailed analyses of SNC meteorites in Terrestrial laboratories utilize the most sophisticated organic, isotopic and microscopic techniques in existence. Indeed; it is unlikely that the key biogenic indicators used in McKay et al (ibid) could be identified by a remote instrument on the surface of Mars. As a result, it is probable that any robotic search for evidence of an ancient Martian biosphere will have as its focus the identification of key minerals in likely host rocks rather than the direct detection of organic or isotopic biomarkers. Even on a sample return mission, mineralogical screening will be utilized to choose the most likely candidate rocks. X-ray diffraction (XRD) is the only technique that can provide a direct determination of the crystal structures of the phases present within a sample. When many different crystalline phases are present, quantitative analysis is better constrained if used in conjunction with a determination of elemental composition, obtainable by X-ray fluorescence (XRF) using the same X-ray source as for XRD. For planetary surface analysis, a remote instrument combining XRD and XRF could be used for mineralogical characterization of both soils and rocks. We are designing a remote XRD/XRF instrument with this objective in mind. The instrument concept pays specific attention to constraints in sample preparation, weight, volume, power, etc. Based on the geometry of a pinhole camera (transmission geometry, flat two-dimensional detector perpendicular to the direct beam), the instrument (which we call CHEMIN, for Chemistry and Mineralogy) uses an X-ray sensitive CCD detector which will allow concurrent positional and energy-dispersive analysis of collected photons. Thus XRF (energy) and XRD (geometry) analysis of transmitted X-rays will be performed at the same time. Tests performed with single minerals and simple mixtures give promising results. Refinements of the prototype promise interpretable results on complex samples.

Sarrazin, P.↗
NASA NTRS2012

Visual System for Browsing, Analysis, and Retrieval of Data (ViSBARD)

ViSBARD software provides a way of visualizing multiple vector and scalar quantities as measured by many spacecraft at once. The data are displayed three-dimensionally along the orbits that may be shown either as connected lines or as points. The data display allows the rapid determination of vector configurations, correlations among many measurements at multiple points, and global relationships. Things such as vector field rotations and dozens of simultaneous variables are very difficult to see in (complementary) panel plot representations. The current and next generations of space physics missions require a means to display from tens to hundreds of time series of data in such a way that the mind can comprehend them for the purposes of browsing data, retrieving them in directly useful form, and analyzing them in a global context. Sets of many spacecraft, each carrying many instruments yielding nearly continuous data at high time resolution, have become one of the most effective ways to make progress in understanding the extended, ionized (plasma) atmosphere of the Earth and the Sun. For large collections of data to be effective, they must be extremely readily accessible, with simple, comprehensible overviews of what is available. ViSBARD provides a means to answer these concerns. The ViSBARD package also acts as a remote repository browser; an interface to a Virtual Observatory. Therefore, data can be pulled directly into the application, as opposed to searching for it and downloading separately.

Roberts, Aaron↗
DOE OSTI2026

An end-to-end workflow for executing a classically bootstrapped variational quantum algorithm on an academic quantum computer

Academic quantum computing platforms often face unique challenges in executing quantum workloads due to fragmented software environments and limited engineering support. Unlike commercial ecosystems, academic devices typically evolve without full-stack integration in mind, making it difficult to run complex applications—such as variational quantum algorithms (VQA)—reliably and efficiently. Issues such as incompatible software layers and lack of automated job management significantly increase the overhead of theory-experiment collaboration. To address these challenges, we develop a modular, end-to-end workflow that decouples application-layer code from low-level hardware control, automates circuit submission and result collection, and supports fine-grained circuit-level job scheduling and recovery. The architecture employs a dual-end application programming interface (API) design, enabling robust operation across unstable or resource-constrained hardware backends. For practical use, the framework is lightweight and user-friendly, allowing rapid prototyping of full-stack workflows using basic Python tools. We validate this workflow on a high-fidelity trapped-ion quantum computer by demonstrating a variational quantum eigensolver (VQE) experiment with a classically bootstrapped ansatz initialization technique. The system successfully executed over 60,000 circuits across multiple molecular test cases with minimal human intervention, highlighting the framework’s effectiveness in enabling reproducible, resilient quantum experimentation in academic settings.

Clifford↗
DOE OSTI2026

Artificial Intelligence-Assisted Daytime Video Monitoring for Bird, Insect, and Other Wildlife Interactions with Photovoltaic Solar Energy Facilities

Studying bird, insect, and other wildlife interactions with photovoltaic (PV) solar energy facilities is difficult due to limited multi-season, multi-site data. Researchers can address such data gaps by combining passive monitoring and artificial intelligence (AI). As a part of the development of AI-enabled avian–solar monitoring software, we collected over 19,000 h of daytime videos at five PV sites across three U.S. regions between 2019 and 2024. We applied a moving object detection and tracking (MODT Version 1) AI model we developed earlier to 4373 h of the footage to extract moving objects in video frames, and human reviewers interpreted the model output and identified 68,646 bird, 25,968 insect, and 169 other wildlife instances to generate the training/validation dataset. We analyzed the data by site, region, and season, considering ground cover and landscapes. Songbirds were most common, with raptors as the next most frequent group. Most notably, no bird collisions were confirmed in our observations collected from the videos. Birds most often flew over or near panels, with the highest observations in the Midwest and Northeast (approximately 30 observations per hour on average) and fewer in the desert Southwest. Other behaviors included perching, foraging, and nesting. Bird abundance peaked during breeding and migration seasons. AI-assisted video monitoring proved effective for non-invasively studying flying wildlife at solar facilities to inform ecologically mindful energy development.

avian mortality↗
DOE OSTI2023

Social network structure and the spread of complex contagions from a population genetics perspective

Ideas, behaviors, and opinions spread through social networks. If the probability of spreading to a new individual is a non-linear function of the fraction of the individuals’ affected neighbors, such a spreading process becomes a “complex contagion”. This non-linearity does not typically appear with physically spreading infections, but instead can emerge when the concept that is spreading is subject to game theoretical considerations (e.g. for choices of strategy or behavior) or psychological effects such as social reinforcement and other forms of peer influence (e.g. for ideas, preferences, or opinions). Here we study how the stochastic dynamics of such complex contagions are affected by the underlying network structure. Motivated by simulations of complex contagions on real social networks, we present a framework for analyzing the statistics of contagions with arbitrary non-linear adoption probabilities based on the mathematical tools of population genetics. The central idea is to use an effective lower-dimensional diffusion process to approximate the statistics of the contagion. This leads to a tradeoff between the effects of ”selection” (microscopic tendencies for an idea to spread or die out), random drift, and network structure. Our framework illustrates intuitively several key properties of complex contagions: stronger community structure and network sparsity can significantly enhance the spread, while broad degree distributions dampen the effect of selection compared to random drift. Finally, we show that some structural features can exhibit critical values that demarcate regimes where global contagions become possible for networks of arbitrary size. Our results draw parallels between the competition of genes in a population and memes in a world of minds and ideas. Our tools provide insight into the spread of information, behaviors, and ideas via social influence, and highlight the role of macroscopic network structure in determining their fate.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2017

Flowing Plasma Interaction with an Electric Sail Tether Element

Electric sails are a relatively new concept for providing high speed propellant-less propulsion. Employing multiple tethers biased to high positive voltage levels (kV), electric sails are designed to gain momentum from the solar wind by repelling solar wind protons. To maximize the area of the sail that interacts with the solar wind, electric sails rely on the formation of a large plasma sheath around each small diameter tether. Motivated by interest in advancing the development of electric sails, a set of laboratory tests has been conducted to study the interaction of a drifting plasma with a sheath formed around a small diameter tether element biased at positive voltages. The laboratory test setup was created with Debye length scaling in mind to offer a path to extrapolate (via modeling) to full scale electric sail missions. Using an instrument known as a Differential Ion Flux Probe (DIFP) the interaction between a positively biased tether element and a drifting plasma has been measured for several scenarios. Clear evidence of the tether element sheath deflecting ions has been obtained. Maps of the flow angle downstream from the tether element have been made and they show the influence of the plasma sheath. Finally, electron current collection measurements have been made for a wide range of plasma conditions and tether element bias voltages. The electron collection data will have an impact on electric sail power requirements, as high voltage power supplies and electron guns will have to be sized to accommodate the electron currents collected by each tether.

Schneider, Todd↗
NASA NTRSDate not supplied

TPSAS-NF1676L-18153-DND

During this session, NASA scientists and educators will discuss the importance of sky observations to better understand our atmosphere. Through participation in NASA education projects (S?COOL, GLOBE, and MY NASA DATA) K-12 students get practice in being scientists by collecting data and conducting their own inquiry investigations. Workshop participants will engage in hands-on activities showcasing how aerosols can impact the color and clarity of the sky. Teachers will explore NASA satellite imagery and data to predict global patterns of aerosols and observe interactions within Earth atmosphere. The workshop will be structured following the 5E Learning Model. Workshop activities are classroom ready, aligned to the Next Generation Science Standards, and align well with Georgia science standards for Habits of Mind and Nature of Science, as well as the following content standards: S4E3, S4E4, S6E4, S8SR1, S8SR2, S8SR4, SES3, SES5 and SES6.

Sarah Crecelius↗
DOE OSTI2024

Machine Learning meets Algebraic Combinatorics: A Suite of Benchmark Datasets to Accelerate AI for Mathematics Research

The use of benchmark datasets has become an important engine of progress in machine learning (ML) over the past 15 years. Recently there has been growing interest in utilizing machine learning to drive advances in research-level mathematics. However, off-the-shelf solutions often fail to deliver the types of insights required by mathematicians. This suggests the need for new ML methods specifically designed with mathematics in mind. The question then is: what benchmarks should the community use to evaluate these? On the one hand, toy problems such as learning the multiplicative structure of small finite groups have become popular in the mechanistic interpretability community whose perspective on explainability aligns well with the needs of mathematicians. While toy datasets are a useful benchmark for initial work, they lack the scale, complexity, and sophistication of many of the principal objects of study in modern mathematics. To address this, we introduce a new collection of benchmark datasets, Algebraic Combinatorics Benchmarks (ACBench), representing either classic or open problems in algebraic combinatorics, a subfield of mathematics that studies discrete structures arising from abstract algebra. After describing the datasets, we discuss the challenges involved in constructing “good” mathematics benchmarks, describe baseline model performance, and discuss some of the insights these datasets can provide that may be of interest even to those who are not interested in mathematics research itself.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2017

CubeSat Launch Initiative Overview and CubeSat 101

The National Aeronautics and Space Administration (NASA) recognizes the tremendous potential that CubeSats (very small satellites) have to inexpensively demonstrate advanced technologies, collect scientific data, and enhance student engagement in Science, Technology, Engineering, and Mathematics (STEM). The CubeSat Launch Initiative (CSLI) was created to provide launch opportunities for CubeSats developed by academic institutions, non-profit entities, and NASA centers. This presentation will provide an overview of the CSLI, its benefits, and its results. This presentation will also provide high level CubeSat 101 information for prospective CubeSat developers, describing the development process from concept through mission operations while highlighting key points that developers need to be mindful of.

Launching↗
NASA NTRS2003

A Fluorescent Aerogel for Capture and Identification of Interplanetary and Interstellar Dust

Aerogels are extremely low-density solids whose superiority as capturing media for hypervelocity (v > 0.5 km/s) grains has been well established. A prominent example is the use of silica aerogel as the collecting medium for cometary and interstellar grains on NASA s Stardust mission. Aerogel collectors have been deployed in low-earth orbit, but severe background from anthropogenic orbital debris has so far prevented the identification of more than a handful of interplanetary particles. No interstellar particles have been identified so far. Since they are on hyperbolic orbits, extraterrestrial particles are faster than orbital debris, so could in principle be identified on that basis, but existing aerogels give little information on impact velocity. With this in mind, we have developed a novel calorimetric aerogel which passively records the kinetic energy of captured hypervelocity particles.

Dominguez, Gerardo↗
NASA NTRS1982

Design guidelines for the testability of microprocessor based logic designs

This paper deals with the issue of designing microprocessor based systems with testability in mind. The ease of eventual testability should be a design consideration from the earliest design stage. Design guidelines with explicit examples for ease of testability are given. The issue of testing microprocessors as contrasted with testing random logic design is addressed, and procedures are delineated for the testability of microprocessors. Microprocessor testability design guidelines are discussed both at the design stage of the microprocessor itself as well as at the stage where the processor is imbedded as a component in a larger system. Specific instances and examples of a collection of design do's and don'ts are provided.

Mathur, F. P.↗