Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cellulose nanocrystals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Roll-to-Roll, Dual-Layer Slot Die Coating of Chitin and Cellulose Oxygen Barrier Films for Renewable Packaging

Cellulose and chitin are the two most abundant naturally produced biopolymers and are being extensively studied as candidates for renewable oxygen barrier films used in packaging. It has been shown that bilayers formed from cellulose nanocrystals (CNCs) and chitin nanofibers (ChNFs) exhibit oxygen barrier properties similar to polyethylene terephthalate (PET). However, this prior work explored only coating each layer individually in sequence through techniques such as spray coating. Here, we demonstrate the viability of dual-layer slot die coating of CNC/ChNF bilayers onto cellulose acetate (CA) substrates. The dual-layer slot die method enables significantly lower oxygen permeability versus spray coating while using a roll-to-roll system that applies the bilayer in a single pass. This work discusses suspension properties, wetting, and drying conditions required to achieve well-controlled ChNF/CNC bilayers. Spray-coated bilayer films were on average 25% thinner than the dual-layer bilayer film; however, the thickness-normalized oxygen permeability (OP) of the dual-layer-coated ChNF/CNC bilayer film on CA was 20 times better than that of the spray-coated bilayers. Additionally, it has been shown that ChNF contributes to the wetting and barrier properties. Values of OP for the slot die-coated bilayers under optimized drying conditions were as low as 1.2 cm 3 ∙μm∙m -2 ∙d -1 ∙kPa -1 , corresponding to a normalized oxygen transmission rate of 0.32 cm 3 ∙m -2 ∙d -1 at 23 °C and 50% relative humidity. It is also noted that the adhesive properties of the dual-layer coating are also improved when films are air-dried and that ChNF contributes to the wetting and barrier properties.

09 BIOMASS FUELS↗
DOE OSTI2023

Totally chlorine-free peracetic acid pulping for nanocellulose isolation from hemp and poplar

Nanocellulose is a promising and sustainable feedstock for developing advanced and functional materials. However, the characteristics of nanocellulose, such as crystallinity, surface energy, and aspect ratio, can vary depending on biomass source and pretreatment methods, leading to variable performance of the nanocellu-lose-based materials. In this study, cellulose nanocrystals (CNCs) were isolated from hemp and poplar using totally chlorine free (TCF) peracetic acid and sodium chlorite delignification and bleaching pretreatments to probe the influences of biomass source and treatment methods on the isolation and characteristics of CNCs. Our results showed that hemp and poplar were almost completely delignified by peracetic acid treatment, whereas sodium chlorite treatment left 5%–6% lignin in the pulp. The yields of CNCs from raw hemp and poplar biomass ranged from 9.8% to 21.9% and 10.9% to 28.3%, respectively, depending on the treatment methods. The dimensions of CNCs from TCF-treated biomass generally maintained a larger width and aspect ratio than those from sodium chlorite-treated biomass. The poplar-derived CNCs exhibited slightly higher crystallinity of 53%–58% than hemp-derived CNCs of 49%–54%. The zeta potential of the CNCs, ranging from -20.1 mV to -31.1 mV, ensured a well-dispersed aqueous solution. The surface energy (dispersive energy of 40–80 mJ/m2 and specific energy of 2–10 mJ/m2), water interaction, and thermal stability of the CNCs were comparable, regardless of the biomass source and pretreatment methods. Our finding suggests that the TCF technique with peracetic acid treatment is a promising delignification and bleaching approach to obtain cellulose-rich pulps from herbaceous and hardwood biomass for nanocellulose isolation.

09 BIOMASS FUELS↗
DOE OSTI2023

Characterization of CNC Nanoparticles Prepared via Ultrasonic-Assisted Spray Drying and Their Application in Composite Films

The ultrasonic-assisted spray dryer, also known as a nano spray dryer and predominantly used on a lab scale in the pharmaceutical and food industries, enables the production of nanometer-sized particles. In this study, the nano spray dryer was applied to cellulosic materials, such as cellulose nanofibrils (CNFs) and cellulose nanocrystals (CNCs). CNC suspensions were successfully dried, while the CNF suspensions could not be dried, attributable to their longer fibril lengths. The nano spray drying process was performed under different drying conditions, including nebulizer hole sizes, solid concentrations, and gas flow rates. It was confirmed that the individual particle size of nano spray-dried CNCs (nano SDCNCs) decreased as the nebulizer hole sizes and solid contents of the suspensions decreased. The production rate of the nano spray dryer increased with higher solid contents and lower gas flow rates. The resulting nano SDCNCs were added to a polyvinyl alcohol (PVA) matrix as a reinforcing material to evaluate their reinforcement behavior in a plastic matrix using solvent casting. After incorporating the 20 wt.% nano SDCNCs into the PVA matrix, the tensile strength and tensile modulus elasticity of the neat PVA nanocomposite film increased by 22% and 32%, respectively, while preserving the transparency of the films.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Promoting electrochemical rates by concurrent ionic-electronic conductivity enhancement in high mass loading cathode electrode

Enhancing the fast charging capacity of thick electrodes with high mass loading is imperative in expediting the widespread adoption of electric vehicles. Nonetheless, the insufficient charge transfer kinetics of thick electrodes hinder the movement of effective electrons and ions, hence diminishing capacity at high current rates. In this work, we applied sustainable and biodegradable cellulose nanocrystals (CNCs) as electrode additives. It is the first time to simultaneously improve the electronic conductivity by optimizing the carbon dispersion and establishing electron transfer networks, as well as boosting the ionic conductivity of electrodes by shortening the ion transfer pathway. Specifically, the LiNi 0.6 Mn 0.2 Co 0.2 O 2 electrodes incorporating 1% dual functional CNCs additive exhibit improved effective electrical conductivity from 0.11 to 0.16 S/m and risen effective ionic conductivity from 0.36 to 0.62 S/m, in comparison to counterpart electrodes without CNCs. Therefore, the 1% CNC electrode with a high mass loading of 27.0 mg/cm 2 delivers a discharge capacity of 128 mAh/g at 1 C, which is superior to that of the CNC-free electrodes (95 mAh/g). In short, this study presents a novel environmentally friendly, economically viable, and dual-functional electrode additive that enhances both electronic and ionic conductivities with the aim of facilitating the widespread adoption of fast-charging high mass loading electrodes.

25 ENERGY STORAGE↗
DOE OSTI2020

Cellulose nanofibrils and nanocrystals in confined flow: Single-particle dynamics to collective alignment revealed through scanning small-angle x-ray scattering and numerical simulations

Nanostructured materials made through flow-assisted assembly of proteinaceous or polymeric nanosized fibrillar building blocks are promising contenders for a family of high-performance biocompatible materials in a wide variety of applications. Optimization of these processes relies on improving our knowledge of the physical mechanisms from nano- to macroscale and especially understanding the alignment of elongated nanoparticles in flows. Here, we study the full projected orientation distributions of cellulose nanocrystals (CNCs) and nanofibrils (CNFs) in confined flow using scanning microbeam SAXS. For CNCs, we further compare with a simulated system of dilute Brownian ellipsoids, which agrees well at dilute concentrations. However, increasing CNC concentration to a semidilute regime results in locally arranged domains called tactoids, which aid in aligning the CNC at low shear rates, but limit alignment at higher rates. Similarly, shear alignment of CNF at semidilute conditions is also limited owing to probable bundle or flock formation of the highly entangled nanofibrils. Finally, this work provides a quantitative comparison of full projected orientation distributions of elongated nanoparticles in confined flow and provides an important stepping stone towards predicting and controlling processes to create nanostructured materials on an industrial scale.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Leveraging peptide–cellulose interactions to tailor the hierarchy and mechanics of peptide–polymer hybrids

Inspired by spider silk's hierarchical diversity, we leveraged peptide motifs with the capability to tune structural arrangement for controlling the mechanical properties of a conventional polymer framework. The addition of nanofiller with hydrogen bonding sites was used as another pathway towards hierarchical tuning via matrix–filler interactions. Specifically, peptide–polyurea hybrids (PPUs) were combined with cellulose nanocrystals (CNCs) to develop mechanically-tunable nanocomposites via tailored matrix–filler interactions (or peptide–cellulose interactions). In this material platform, we explored the effect of these matrix–filler interactions on the secondary structure, hierarchical ordering, and mechanical properties of the peptide hybrid nanocomposites. Interactions between the peptide matrix and CNCs occur in all of the PPU/CNC nanocomposites, preventing α-helical ordering, but promoting inter-molecular hydrogen bonded β-sheet formation. Depending on peptide and CNC content, the Young's modulus varies from 10 to 150 MPa. Unlike conventional cellulose-reinforced polymer nanocomposites, the mechanical properties of these composite materials are dictated by a balance of CNC reinforcement, peptidic ordering, and microphase-separated morphology. This research highlights that leveraging peptide–cellulose interactions is a strategy to create materials with targeted mechanical properties for a specific application using a limited selection of building blocks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Multilayer Chitin–Chitosan–Cellulose Barrier Coatings on Poly(ethylene terephthalate)

Currently, effective barrier properties over a wide range of humidity are achieved by layering multiple plastics, resulting in structures that are nearly impossible to recycle through current systems. There is strong interest in developing barriers that are recyclable, biodegradable, or compostable. Chitin and cellulose nanomaterials are promising alternatives because of their high crystallinity, renewable sourcing, strong electrostatic interactions, and potential for biodegradation or composting. In this paper, we explore the potential to create multilayer materials with effective oxygen and water vapor barrier properties at elevated humidity by combining recyclable poly(ethylene terephthalate) (PET) films with single-layer and bilayer coatings of chitin nanowhiskers (ChNWs), chitosan (CS), and cellulose nanocrystals (CNCs). The addition of CS to the ChNW suspension improved the gas barrier properties of ChNW coatings, likely by filling voids, and short ChNWs (SChNW, 114 nm) performed better than long ChNWs (LChNW, 230 nm). At the optimal mass ratio of 1:1 SChNW/CS, the oxygen permeability (OP) of SChNW/CS-coated PET films was 5.1 cm 3 μm m –2 day –1 kPa –1 versus 15.9 cm 3 μm m –2 day –1 kPa –1 for neat PET. To take advantage of electrostatic attraction and hydrogen bonding, CNC was first coated on the PET, followed by coating with ChNW/CS, resulting in an OP as low as 3.6 cm 3 μm m –2 day –1 kPa –1 at 50% relative humidity (RH), and 6.4 cm 3 μm m –2 day –1 kPa –1 at 80% RH. Furthermore, after thermal treatment (120 °C, 2.5 h), the OP dropped to 2.2 cm 3 μm m –2 day –1 kPa –1 (50% RH) and 4.8 cm 3 μm m –2 day –1 kPa –1 (80% RH). The ChNW/CS and CNC coating can be efficiently removed with alkali treatment enabling possible recycling of the coated PET films.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Nanoparticle/Polyelectrolyte Complexes for Biomimetic Constructs

Abstract Constructing all‐aqueous systems with tailored geometries can generate a new class of biomimetic materials, a fascinating but challenging goal to achieve. Here, by taking advantage of the interfacial complexation of a polyelectrolyte (PE) and cellulose nanocrystals (CNCs), a unique interfacial PE/CNC complex is demonstrated for the stabilization of aqueous two‐phase systems and for the fabrication of all‐aqueous double emulsions and 3D constructs. The thickness of PE/CNC complex can be effectively adjusted by tuning the osmotic stress imbalance between the two aqueous phases and, during the formation and thickening of PE/CNC complex, individual assemblies can be connected to design hierarchical all‐aqueous structures. This new platform affords tremendous potential for engineering biomimetic constructs with advanced functionality, that can be used for chemical separation, delivery, and biphasic cascading reaction vessels.

Yin, Yixuan↗
DOE OSTI2023

Bio-Templated Chiral Zeolitic Imidazolate Framework for Enantioselective Chemoresistive Sensing

Chiral metal–organic frameworks (MOFs) have gained rising attention as ordered nanoporous materials for enantiomer separations, chiral catalysis, and sensing. Among those, chiral MOFs are generally obtained through complex synthetic routes by using a limited choice of reactive chiral organic precursors as the primary linkers or auxiliary ligands. Here, we report a template-controlled synthesis of chiral MOFs from achiral precursors grown on chiral nematic cellulose-derived nanostructured bio-templates. We demonstrate that chiral MOFs, specifically, zeolitic imidazolate framework (ZIF), unc-[Zn(2-MeIm) 2 , 2-MeIm=2-methylimidazole], can be grown from regular precursors within nanoporous organized chiral nematic nanocelluloses via directed assembly on twisted bundles of cellulose nanocrystals. The template-grown chiral ZIF possesses tetragonal crystal structure with chiral space group of P4 1 , which is different from traditional cubic crystal structure of I-43 m for freely grown conventional ZIF-8. The uniaxially compressed dimensions of the unit cell of templated ZIF and crystalline dimensions are signatures of this structure. We observe that the templated chiral ZIF can facilitate the enantiotropic sensing. It shows enantioselective recognition and chiral sensing abilities with a low limit of detection of 39 μM and the corresponding limit of chiral detection of 300 μM for representative chiral amino acid, D- and L- alanine.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Chemical structure–property relationships in nanocelluloses

Abstract Nanocelluloses, nanoscale cellulosic particles or fibrils, are an appealing class of nanomaterials with enormous potential for sustainable development. They have great promise to target some of the 17 Sustainable Development Goals outlined by the United Nations. Nanocelluloses are derived from the most abundant biopolymer in the world, cellulose, which have multiple hydroxyl groups on their surface, enabling a vast range of chemical modifications. The interplay between the chemical structure and physicochemical properties of nanocelluloses is crucial to engineering the next generation of green, functional nanomaterials. In this review paper, we provide a comprehensive account of the structure–property relationships in nanocelluloses, which may establish the basis for the design of precision bio‐based materials. Chemical modifications of nanocelluloses, including hydrolysis, oxidation, esterification, amidation, and polymer grafting, provide an array of chemical and physical properties that open opportunities in a diverse spectrum of applications. We review how chemical modifications affect the physicochemical properties of nanocelluloses, such as thermal stability, hydrophobicity, and dispersibility in nonpolar media. Understanding nanocellulose chemical structure–property relationships is integral to the development of sustainable material platforms based on the most renewable biopolymer on earth.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Synergistic enhancement of nanocellulose foam with dual in situ mineralization and crosslinking reaction

Cellulose nanocrystals (CNCs) foams have recently gained research interests because they are renewable, abundant, biodegradable and exhibit high surface area. However, the application of CNCs-based foams is still challenging, which is attributed to its lack of effective entanglements between the CNCs particles, thus lowering foam properties. In this study, a synergistic enhancement strategy was proposed, based on the in situ mineralization with hydroxyapatite (HAP) layer onto the CNCs surface, followed by a chemical crosslinking reaction. The physical and chemical structures of the composites were analyzed with SEM, STEM, XRD, FTIR, and TGA. By controlling the amount of coated HAP and the crosslinker, it is possible to manufacture a series of CNCs-based foams that are lightweight (50–75 mg/cm 3 ), highly porous (~90%) with high water absorption (>1300%) and outstanding mechanical strength properties (as high as 1.37 MPa). Moreover, our study further indicated that these CNCs/HAP materials could increase the proliferation of rat osteoblast cells. The method developed in this study presents a novel approach to design improved networked CNCs foam, which has the potential to be used in thermal-retardant material, wastewater treatment, tissue engineering, and personal care applications.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Cylindrical Confinement of Nanocolloidal Cholesteric Liquid Crystal

The organization of nanocolloidal liquid crystals in constrained geometries has fundamental and practical importance, since under confinement, liquid crystals contain stable topological defects that can serve as templates for nanoparticle organization. Three-dimensional confinement of cholesteric (Ch) liquid crystals formed by cellulose nanocrystals (CNCs) have been extensively studied; however, their two-dimensional confinement remains underinvestigated. In this work, we report the results of systematic experimental studies of two-dimensional confinement of Ch–CNC liquid crystal in cylindrical capillaries with varying inner diameters. Confinement resulted in phase separation of the Ch–CNC liquid crystal into a Ch shell formed by concentric CNC pseudolayers with the helicoidal axis perpendicular to the inner surface of the capillary walls, and a micrometer-diameter isotropic core thread running parallel to the long axis of the capillary. The morphology of the confined Ch–CNC liquid crystal varied when progressively increasing the degree confinement. Finally, we show that phase separation of the Ch–CNC liquid crystal into a Ch shell and an isotropic core is preserved in flexible capillary tubing, suggesting the applicability of this system for the fabrication of flexible optical waveguides.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Nanocellulose Dewatering and Drying: Current State and Future Perspectives

The knowledge base for nanocellulose (NC) has grown exponentially over the past two decades and continues to expand with the increasing number of potential applications demonstrated in the literature and the patent space. NC has multiple forms depending on the starting cellulose source and the specific process used to produce it. Its high degree of surface reactivity makes it an ideal support structure for a wide variety of functional groups, leading to the ability to engineer materials for very specific applications. However, removing water from an NC suspension, e.g., dewatering and drying, while retaining the nanoscale properties of the NC remains a significant challenge to successful commercialization of NC materials. Processes for dewatering and drying of NC are desirable because of the high transport costs of shipping dilute aqueous suspensions, as well as end-use application requirements. Therefore, the development of nondestructive, cost-effective, scalable, and environmentally friendly dewatering and drying processes is important for commercial deployment of NC applications. This review addresses the current state of published knowledge on NC dewatering and drying and identifies research gaps that could be further explored in a precompetitive context to accelerate commercialization.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Natural nanoparticle complexes at water-water interfaces

Aqueous two-phase systems (ATPSs) with multifunctional attributes have significant promise as biomimetic materials, but current approaches do not harness their full potential. Here, we show that ATPSs can be stabilized to form microcapsules by the interfacial assembly of chitin nanofibers (ChNF) and rod-like cellulose nanocrystals (CNC). The high structural stability of the ChNF/CNC complexes integrates permeability and transport across the membrane at the liquid/liquid interface. Driven by density and osmotic stress gradients, the microcapsules show switchable motility, including cyclic meniscus-climbing and subsurface transport. These observations demonstrate a self-regulating system with potential for cargo transfer, cell biomimicry, as well as ATPSs-based microreactors and microrobots.

Bioinspired materials↗
DOE OSTI2025

Harnessing peptide–cellulose interactions to tailor the performance of self-assembled, injectable hydrogels

Taking inspiration from natural systems, such as spider silk and mollusk nacre, that employ hierarchical assembly to attain robust material performance, we leveraged matrix–filler interactions within reinforced polymer–peptide hybrids to create self-assembled hydrogels with enhanced properties. Specifically, cellulose nanocrystals (CNCs) were incorporated into peptide–polyurea (PPU) hybrid matrices to tailor key hydrogel features through matrix–filler interactions. Herein, we examined the impact of peptide repeat length and CNC loading on hydrogelation, morphology, mechanics, and thermal behavior of PPU/CNC composite hydrogels. The addition of CNCs into PPU hydrogels resulted in increased gel stiffness; however, the extent of reinforcement of the nanocomposite gels upon nanofiller inclusion also was driven by PPU architecture. Temperature-promoted stiffening transitions observed in nanocomposite PPU hydrogels were dictated by peptide segment length. Analysis of the peptide secondary structure confirmed shifts in the conformation of peptidic domains (α-helices or β-sheets) upon CNC loading. Finally, PPU/CNC hydrogels were probed for their injectability characteristics, demonstrating that nanofiller–matrix interactions were shown to aid rapid network reformation (∼10 s) upon cessation of high shear forces. Overall, this research showcases the potential of modulating matrix–filler interactions within PPU/CNC hydrogels through strategic system design, enabling the tuning of functional hydrogel characteristics for diverse applications.

42 ENGINEERING↗
DOE OSTI2025

Designing Antifouling and Antimicrobial Interfaces: Structural Characterization using CryoEM, Automated Microscopy, and AI Image Segmentation

The design of functionalized surfaces for interactions with biological systems is critical across sectors such as healthcare, energy, and agriculture. Tailoring materials for specific applications, such as antifouling and antimicrobial surfaces, demands a comprehensive understanding of topology and chemistry across multiple length and time scales on both biological and materials systems. This work presents the development and characterization of nanostructured surfaces with controlled topographies and chemistries that enhance bacterial membrane disruption, reduce biofilm formation, and improve antimicrobial and antifouling capabilities. Two specific use cases will be presented - the use of cellulose nanocrystals (CNCs) for bacterial growth inhibition and the development of antifouling surfaces to prevent protein and bacterial adsorption [1-4]. By leveraging large language models (LLMs) for image segmentation and training [5], we enable automated analysis of terabyte-scale cryogenic electron microscopy (cryoEM) datasets. This analysis provides statistical insights into the biotic/abiotic interface and facilitates automated electron microscopy experiments to mitigate time and dose. The integration of cryogenic electron tomography (cryoET) and cryogenic focused ion beam (cryoFIB) milling enables high-resolution, near-native-state imaging and 3D reconstructions of bio/material interfaces [6]. Orthogonal characterization techniques and computational modeling further enhances our understanding, offering a robust platform for the design and optimization of next-generation functional surfaces [7].

Williams, Alexis [ORNL] (ORCID:0000000252835822)↗
DOE OSTI2021

Self-organization of nanoparticles and molecules in periodic Liesegang-type structures

Chemical organization in reaction-diffusion systems offers a strategy for the generation of materials with ordered morphologies and structural hierarchy. Periodic structures are formed by either molecules or nanoparticles. On the premise of new directing factors and materials, an emerging frontier is the design of systems in which the precipitation partners are nanoparticles and molecules. We show that solvent evaporation from a suspension of cellulose nanocrystals (CNCs) and L -(+)-tartaric acid [ L -(+)-TA] causes phase separation and precipitation, which, being coupled with a reaction/diffusion, results in rhythmic alternation of CNC-rich and L -(+)-TA–rich rings. The CNC-rich regions have a cholesteric structure, while the L -(+)-TA–rich bands are formed by radially aligned elongated bundles. The moving edge of the pattern propagates with a finite constant velocity, which enables control of periodicity by varying film preparation conditions. This work expands knowledge about self-organizing reaction-diffusion systems and offers a strategy for the design of self-organizing materials.

36 MATERIALS SCIENCE↗