Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cellulose”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Tailorable Cellulose II Nanocrystals (CNC II) Prepared in Mildly Acidic Lithium Bromide Trihydrate (MALBTH)

Preparing cellulose II nanocrystals (CNC II) requires a polymorph transformation of natural cellulose I feedstocks. The transformation is usually achieved via a process such as mercerization or dissolution–regeneration. This study demonstrated a new method to prepare CNC II directly from bleached kraft pulp (BKP, a commercially available cellulose I feedstock) in a mildly acidic lithium bromide trihydrate (MALBTH) system, a concentrated (~61 wt%) solution of LiBr in water with a very low concentration (2.5 mM) of sulfuric acid. First, the BKP was treated in the MALBTH system to generate a cellulose II hydrolysis solid residue (CHR) with a yield of 64–86%, during which the selective hydrolysis of disordered cellulose and the polymorph transformation were completed simultaneously. Then, subsequent oxidation of the CHR by ammonium persulfate (APS, 0.1–0.6 M) resulted in the CNC II with high yield (up to 62%), high crystallinity (over 90%), rich surface carboxyl group (0.3–1.2 mmol g-1 cellulose), excellent colloidal stability (up to -59 mV zeta potential), and high thermal stability. The CNC II had a tunable length (26–57 nm), determined by the conditions of the MALBTH hydrolysis and the APS oxidation, but similar lateral dimension (8–10 nm). The characterization of the CHR by wide-angle X-ray diffraction and Fourier transform infrared spectroscopy verified the polymorphic transformation from cellulose I to II during the MALBTH treatment. The swelling of the BKP in the MALBTH enabled cellulose crystallites to slide and reassemble, which completed the rearrangement of cellulose chains from parallel to anti-parallel conformation (polymorph transformation from cellulose I to II). This study provided an efficient and green method to produce cellulose II nanocrystals with controllable aspect ratios via the simultaneous hydrolysis and polymorph transformation of cellulose I feedstocks.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Cellulose assembles into helical bundles of uniform handedness in cell walls with abnormal pectin composition

Plant cells and organs grow into a remarkable diversity of shapes, as directed by cell walls composed primarily of polysaccharides such as cellulose and multiple structurally distinct pectins. The properties of the cell wall that allow for precise control of morphogenesis are distinct from those of the individual polysaccharide components. For example, cellulose, the primary determinant of cell morphology, is a chiral macromolecule that can self-assemble in vitro into larger-scale structures of consistent chirality, and yet most plant cells do not display consistent chirality in their growth. One interesting exception is the Arabidopsis thaliana rhm1 mutant, which has decreased levels of the pectin rhamnogalacturonan-I and causes conical petal epidermal cells to grow with a left-handed helical twist. Here, we show that in rhm1 the cellulose is bundled into large macrofibrils, unlike the evenly distributed microfibrils of the wild type. This cellulose bundling becomes increasingly severe over time, consistent with cellulose being synthesized normally and then self-associating into macrofibrils. We also show that in the wild type, cellulose is oriented transversely, whereas in rhm1 mutants, the cellulose forms right-handed helices that can account for the helical morphology of the petal cells. Furthermore, our results indicate that when the composition of pectin is altered, cellulose can form cellular-scale chiral structures in vivo, analogous to the helicoids formed in vitro by cellulose nano-crystals. We propose that an important emergent property of the interplay between rhamnogalacturonan-I and cellulose is to permit the assembly of nonbundled cellulose structures, providing plants flexibility to orient cellulose and direct morphogenesis.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Impacts of cellulase deactivation at the moving air–liquid interface on cellulose conversions at low enzyme loadings

Background: We recently confirmed that the deactivation of T. reesei cellulases at the air–liquid interface reduces microcrystalline cellulose conversion at low enzyme loadings in shaken flasks. It is one of the main causes for lowering of cellulose conversions at low enzyme loadings. However, supplementing cellulases with small quantities of surface-active additives in shaken flasks can increase cellulose conversions at low enzyme loadings. It was also shown that cellulose conversions at low enzyme loadings can be increased in unshaken flasks if the reactions are carried for a longer time. This study further explores these recent findings to better understand the impact of air–liquid interfacial phenomena on enzymatic hydrolysis of cellulose contained in Avicel, Sigmacell, α-cellulose, cotton linters, and filter paper. The impacts of solids and enzyme loadings, supplementation with nonionic surfactant Tween 20 and xylanases, and application of different types of mixing and reactor designs on cellulose hydrolysis were also evaluated.Results: Avicel cellulose conversions at high solid loading were more than doubled by minimizing loss of cellulases to the air–liquid interface. Maximum cellulose conversions were high for surface-active supplemented shaken flasks or unshaken flasks because of low cellulase deactivation at the air–liquid interface. The nonionic surfactant Tween 20 was unable to completely prevent cellulase deactivation in shaken flasks and only reduced cellulose conversions at unreasonably high concentrations.Conclusions: High dynamic interfacial areas created through baffles in reactor vessels, low volumes in high-capacity vessels, or high shaking speeds severely limited cellulose conversions at low enzyme loadings. Precipitation of cellulases due to aggregation at the air–liquid interface caused their continuous deactivation in shaken flasks and severely limited solubilization of cellulose.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Preferred crystallographic orientation of cellulose in plant primary cell walls

Abstract Cellulose, the most abundant biopolymer on earth, is a versatile, energy rich material found in the cell walls of plants, bacteria, algae, and tunicates. It is well established that cellulose is crystalline, although the orientational order of cellulose crystallites normal to the plane of the cell wall has not been characterized. A preferred orientational alignment of cellulose crystals could be an important determinant of the mechanical properties of the cell wall and of cellulose-cellulose and cellulose-matrix interactions. Here, the crystalline structures of cellulose in primary cell walls of onion ( Allium cepa ), the model eudicot Arabidopsis ( Arabidopsis thaliana ), and moss ( Physcomitrella patens ) were examined through grazing incidence wide angle X-ray scattering (GIWAXS). We find that GIWAXS can decouple diffraction from cellulose and epicuticular wax crystals in cell walls. Pole figures constructed from a combination of GIWAXS and X-ray rocking scans reveal that cellulose crystals have a preferred crystallographic orientation with the (200) and (110)/( $$1\bar 10$$ 1 1 ¯ 0 ) planes preferentially stacked parallel to the cell wall. This orientational ordering of cellulose crystals, termed texturing in materials science, represents a previously unreported measure of cellulose organization and contradicts the predominant hypothesis of twisting of microfibrils in plant primary cell walls.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ammonia-salt solvent promotes cellulosic biomass deconstruction under ambient pretreatment conditions to enable rapid soluble sugar production at ultra-low enzyme loadings

In this paper, we report a novel ammonia : ammonium salt solvent based pretreatment process that can rapidly dissolve crystalline cellulose into solution and eventually produce highly amorphous cellulose under near-ambient conditions. Pre-activating the cellulose I allomorph to its ammonia–cellulose swollen complex (or cellulose III allomorph) at ambient temperatures facilitated rapid dissolution of the pre-activated cellulose in the ammonia-salt solvent ( i.e. , ammonium thiocyanate salt dissolved in liquid ammonia) at ambient pressures. For the first time in reported literature, we used time-resolved in situ neutron scattering methods to characterize the cellulose polymorphs structural modification and understand the mechanism of crystalline cellulose dissolution into a ‘molecular’ solution in real-time using ammonia-salt solvents. We also used molecular dynamics simulations to provide insight into solvent interactions that non-covalently disrupted the cellulose hydrogen-bonding network and understand how such solvents are able to rapidly and fully dissolve pre-activated cellulose III. Importantly, the regenerated amorphous cellulose recovered after pretreatment was shown to require nearly ~50-fold lesser cellulolytic enzyme usage compared to native crystalline cellulose I allomorph for achieving near-complete hydrolytic conversion into soluble sugars. Lastly, we provide proof-of-concept results to further showcase how such ammonia-salt solvents can pretreat and fractionate lignocellulosic biomass like corn stover under ambient processing conditions, while selectively co-extracting ~80–85% of total lignin, to produce a highly digestible polysaccharide-enriched feedstock for biorefinery applications. Unlike conventional ammonia-based pretreatment processes ( e.g. , Ammonia Fiber Expansion or Extractive Ammonia pretreatments), the proposed ammonia-salt process can operate at near-ambient conditions to greatly reduce the pressure/temperature severity necessary for conducting effective ammonia-based pretreatments on lignocellulose.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Green synthesis of cellulose formate and its efficient conversion into 5-hydroxymethylfurfural

5-hydroxymethylfurfural (HMF) production from cellulose is a hot topic, while the rigidity of cellulose limits its efficient conversion into HMF. Cellulose formate has exhibited the great potential for HMF production but it’s synthesis via direct formylation of cellulose in formic acid is difficult. We reported a green synthetic route of cellulose formate and its efficient conversion into HMF. Ball milled cellulose formate (BCF) was synthesized via ball milling followed by formylation in formic acid at 80 °C for 0.5 h. The structure of BCF was thoroughly characterized and BCF was subsequently converted to HMF catalyzed by AlCl3 and HCl in dimethyl sulfoxide (DMSO)-H 2 O media. Results showed that ball milling of cellulose for 1–1.5 h efficiently deconstructed its crystallinity and degree of polymerization, boosting its further formylation and catalytic conversion. An overall 66.9% HMF yield from cellulose was achieved at 150 °C for 20 min using BCF derived from cellulose ball milled for 1.5 h as the substrate. BCF exhibits high reactivity toward HMF due to its excellent solubility and accessibility in DMSO-H 2 O media, and the release of formic acid in reaction further facilitates HMF production. BCF synthesized with different ball milling times shows different degrees of substitution of formyl groups, which could serve as an indicator and regulate the HMF production. The green synthesis of cellulose formate creates an efficient pathway for HMF production.

5-hydroxymethylfurfural↗
DOE OSTI2021

Xylan Is Critical for Proper Bundling and Alignment of Cellulose Microfibrils in Plant Secondary Cell Walls

Plant biomass represents an abundant and increasingly important natural resource and it mainly consists of a number of cell types that have undergone extensive secondary cell wall (SCW) formation. These cell types are abundant in the stems of Arabidopsis, a well-studied model system for hardwood, the wood of eudicot plants. The main constituents of hardwood include cellulose, lignin, and xylan, the latter in the form of glucuronoxylan (GX). The binding of GX to cellulose in the eudicot SCW represents one of the best-understood molecular interactions within plant cell walls. The evenly spaced acetylation and 4-O-methyl glucuronic acid (MeGlcA) substitutions of the xylan polymer backbone facilitates binding in a linear two-fold screw conformation to the hydrophilic side of cellulose and signifies a high level of molecular specificity. However, the wider implications of GX–cellulose interactions for cellulose network formation and SCW architecture have remained less explored. In this study, we seek to expand our knowledge on this by characterizing the cellulose microfibril organization in three well-characterized GX mutants. The selected mutants display a range of GX deficiency from mild to severe, with findings indicating even the weakest mutant having significant perturbations of the cellulose network, as visualized by both scanning electron microscopy (SEM) and atomic force microscopy (AFM). We show by image analysis that microfibril width is increased by as much as three times in the severe mutants compared to the wild type and that the degree of directional dispersion of the fibrils is approximately doubled in all the three mutants. Further, we find that these changes correlate with both altered nanomechanical properties of the SCW, as observed by AFM, and with increases in enzymatic hydrolysis. Results from this study indicate the critical role that normal GX composition has on cellulose bundle formation and cellulose organization as a whole within the SCWs.

09 BIOMASS FUELS↗
DOE OSTI2021

Recent Advances in Functional Materials through Cellulose Nanofiber Templating

Advanced templating techniques have enabled delicate control of both nano- and microscale structures and have helped thrust functional materials into the forefront of society. Cellulose nanomaterials are derived from natural polymers and show promise as a templating source for advanced materials. Use of cellulose nanomaterials in templating combines nanoscale property control with sustainability, an attribute often lacking in other templating techniques. Use of cellulose nanofibers for templating has shown great promise in recent years, but previous reviews on cellulose nanomaterial templating techniques have not provided extensive analysis of cellulose nanofiber templating. Cellulose nanofibers display several unique properties, including mechanical strength, porosity, high water retention, high surface functionality, and an entangled fibrous network, all of which can dictate distinctive aspects in the final templated materials. Many applications exploit the unique aspects of templating with cellulose nanofibers that help control the final properties of the material, including, but not limited to, applications in catalysis, batteries, supercapacitors, electrodes, building materials, biomaterials, and membranes. A detailed analysis on the use of cellulose nanofibers templating is provided, addressing specifically how careful selection of templating mechanisms and methodologies, combined toward goal applications, can be used to directly benefit chosen applications in advanced functional materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Engineering and characterization of carbohydrate‐binding modules for imaging cellulose fibrils biosynthesis in plant protoplasts

Abstract Carbohydrate binding modules (CBMs) are noncatalytic domains that assist tethered catalytic domains in substrate targeting. CBMs have therefore been used to visualize distinct polysaccharides present in the cell wall of plant cells and tissues. However, most previous studies provide a qualitative analysis of CBM‐polysaccharide interactions, with limited characterization of engineered tandem CBM designs for recognizing polysaccharides like cellulose and limited application of CBM‐based probes to visualize cellulose fibrils synthesis in model plant protoplasts with regenerating cell walls. Here, we examine the dynamic interactions of engineered type‐A CBMs from families 3a and 64 with crystalline cellulose‐I and phosphoric acid swollen cellulose. We generated tandem CBM designs to determine various characteristic properties including binding reversibility toward cellulose‐I using equilibrium binding assays. To compute the adsorption ( nk on ) and desorption ( k off ) rate constants of single versus tandem CBM designs toward nanocrystalline cellulose, we employed dynamic kinetic binding assays using quartz crystal microbalance with dissipation. Our results indicate that tandem CBM3a exhibited the highest adsorption rate to cellulose and displayed reversible binding to both crystalline/amorphous cellulose, unlike other CBM designs, making tandem CBM3a better suited for live plant cell wall biosynthesis imaging applications. We used several engineered CBMs to visualize Arabidopsis thaliana protoplasts with regenerated cell walls using confocal laser scanning microscopy and wide‐field fluorescence microscopy. Lastly, we also demonstrated how CBMs as probe reagents can enable in situ visualization of cellulose fibrils during cell wall regeneration in Arabidopsis protoplasts.

09 BIOMASS FUELS↗
DOE OSTI2023

Evolution of the Cellulose Microfibril through Gamma-Valerolactone-Assisted Co-Solvent and Enzymatic Hydrolysis

Biomass recalcitrance during deconstruction remains a key bottleneck to affordable biomass processing technologies. A clear connection between the cell wall structure and biomass deconstruction is necessary to understand how lignocellulosic material is broken down to valuable monomeric components. Here, we monitor changes in the cellulose microfibril domains of poplar, sorghum, and switchgrass throughout gamma-valerolactone (GVL)–water co-solvent pretreatment and enzymatic hydrolysis using solid-state 13 C cross-polarization magic angle spinning nuclear magnetic resonance spectroscopy (CP/MAS 13 C-NMR) and wide-angle X-ray scattering (WAXS). Spectral fitting of NMR peaks corresponding to different cellulose microenvironments at the C 4 carbon center suggests that a mildly acidic GVL–water co-solvent pretreatment of poplar leads to nearly full removal of xylan–cellulose linkages, which primes the cellulose for enzymatic attack. The spectral fitting also suggests that the pretreatment causes significant depletion of the inaccessible fibril surface domains with an increase in more thermally stable crystalline resonances (I β ). WAXS confirmed a decrease in the lattice spacing between (200) crystalline planes with increasing co-solvent pretreatment severity. These results are interpreted as an opening of bound microfibril surfaces previously inaccessible to the co-solvent system, which leaves behind a more thermally stable, crystalline domain that is potentially prone to relaxation and recrystallization. Full conversion of residual GVL-pretreated biomass was achieved after the GVL co-solvent pretreatment at 140 °C using a commercial enzyme cocktail, CTec2, which contains different cellulases and other enzymes. Spectral fitting of enzymatically hydrolyzed samples by a single engineered cellulase, CelR, suggests that the residual cellulose recalcitrance is mainly due to the inability of CelR to digest the I β crystalline domain present in pretreated samples. This work helps to provide new information regarding the structure of the cell wall and recalcitrance throughout GVL–water mild acidolysis and CelR enzymatic biomass deconstruction by tracking the evolution of structural domains within the cellulose microfibril. This work further directs recommendations for improving the conversion and sugar yields in future studies. Finally, our findings inform inquiry into larger questions of cellulose recalcitrance through GVL pretreatment and CelR enzymatic hydrolysis and give insight into subsequent required steps for full cellulose conversion with attention to the most recalcitrant cellulose structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Using Solid-State NMR to Understand the Structure of Plant Cellulose

The structure of plant cellulose microfibrils remains elusive, despite the abundance of cellulose and its utility in industry. Using 2D solid-state NMR of 13 C-labeled never-dried plants, six major glucose environments are resolved, which are common to the cellulose of softwood, hardwood, and grasses. These environments are maintained in isolated holocellulose nanofibrils, allowing more detailed microfibril characterization. We show that there are only two glucose environments that reside within the microfibril core. These have the same NMR 13 C chemical shifts as tunicate cellulose Iβ center and origin chains, with no cellulose Iα being detected. The third major glucose site within spectral domain 1, previously assigned to the crystalline microfibril interior, is in close proximity to water, which could indicate that it is a surface glucose environment. The NMR peak widths of all four surface glucose environments are similar to those of the core, indicating that their glucose local order is comparable; there is no significant “amorphous” cellulose in the microfibrils. Consequently, the ratio of the carbon 4 peaks at ∼89 and ∼84 ppm, which has often provided a sample cellulose crystallinity index, is not a meaningful measure of fibril crystallinity or the interior to surface ratio. The revised ratio for poplar wood microfibrils is estimated to be 1:2, which is consistent with an 18-chain microfibril having 6 core and 12 surface chains, although other microfibril sizes are possible. These advances substantially change both the interpretation of solid-state NMR studies of cellulose and the understanding of cellulose microfibril structure and crystallinity.

carbohydrates↗
DOE OSTI2019

Quantifying cellulose accessibility during enzyme-mediated deconstruction using 2 fluorescence-tagged carbohydrate-binding modules

Two fluorescence-tagged carbohydrate-binding modules (CBMs), which specifically bind to crystalline (CBM2a-RRedX) and paracrystalline (CBM17-FITC) cellulose, were used to differentiate the supramolecular cellulose structures in bleached softwood Kraft fibers during enzyme-mediated hydrolysis. Differences in CBM adsorption were elucidated using confocal laser scanning microscopy (CLSM), and the structural changes occurring during enzyme-mediated deconstruction were quantified via the relative fluorescence intensities of the respective probes. It was apparent that a high degree of order (i.e., crystalline cellulose) occurred at the cellulose fiber surface, which was interspersed by zones of lower structural organization and increased cellulose accessibility. Quantitative image analysis, supported by 13 C NMR, scanning electron microscopy (SEM) imaging, and fiber length distribution analysis, showed that enzymatic degradation predominates at these zones during the initial phase of the reaction, resulting in rapid fiber fragmentation and an increase in cellulose surface crystallinity. By applying this method to elucidate the differences in the enzyme-mediated deconstruction mechanisms, this work further demonstrated that drying decreased the accessibility of enzymes to these disorganized zones, resulting in a delayed onset of degradation and fragmentation. The use of fluorescence-tagged CBMs with specific recognition sites provided a quantitative way to elucidate supramolecular substructures of cellulose and their impact on enzyme accessibility. By designing a quantitative method to analyze the cellulose ultrastructure and accessibility, this study gives insights into the degradation mechanism of cellulosic substrates.

09 BIOMASS FUELS↗
DOE OSTI2021

Cellulosic biofuel production using emulsified simultaneous saccharification and fermentation (eSSF) with conventional and thermotolerant yeasts

Abstract Background Future expansion of corn-derived ethanol raises concerns of sustainability and competition with the food industry. Therefore, cellulosic biofuels derived from agricultural waste and dedicated energy crops are necessary. To date, slow and incomplete saccharification as well as high enzyme costs have hindered the economic viability of cellulosic biofuels, and while approaches like simultaneous saccharification and fermentation (SSF) and the use of thermotolerant microorganisms can enhance production, further improvements are needed. Cellulosic emulsions have been shown to enhance saccharification by increasing enzyme contact with cellulose fibers. In this study, we use these emulsions to develop an emulsified SSF (eSSF) process for rapid and efficient cellulosic biofuel production and make a direct three-way comparison of ethanol production between S. cerevisiae , O. polymorpha , and K. marxianus in glucose and cellulosic media at different temperatures. Results In this work, we show that cellulosic emulsions hydrolyze rapidly at temperatures tolerable to yeast, reaching up to 40-fold higher conversion in the first hour compared to microcrystalline cellulose (MCC). To evaluate suitable conditions for the eSSF process, we explored the upper temperature limits for the thermotolerant yeasts Kluyveromyces marxianus and Ogataea polymorpha , as well as Saccharomyces cerevisiae , and observed robust fermentation at up to 46, 50, and 42 °C for each yeast, respectively. We show that the eSSF process reaches high ethanol titers in short processing times, and produces close to theoretical yields at temperatures as low as 30 °C. Finally, we demonstrate the transferability of the eSSF technology to other products by producing the advanced biofuel isobutanol in a light-controlled eSSF using optogenetic regulators, resulting in up to fourfold higher titers relative to MCC SSF. Conclusions The eSSF process addresses the main challenges of cellulosic biofuel production by increasing saccharification rate at temperatures tolerable to yeast. The rapid hydrolysis of these emulsions at low temperatures permits fermentation using non-thermotolerant yeasts, short processing times, low enzyme loads, and makes it possible to extend the process to chemicals other than ethanol, such as isobutanol. This transferability establishes the eSSF process as a platform for the sustainable production of biofuels and chemicals as a whole.

09 BIOMASS FUELS↗
DOE OSTI2025

The three cellulose synthase isoforms for secondary cell wall make specific contributions to microfibril synthesis

Cellulose is synthesized at the plasma membrane by the cellulose synthase complex, a structure that contains three distinct isoforms of the catalytic subunit, cellulose synthase A (CESA). The division into three subunits appears early in land plant evolution and is highly conserved, particularly for the secondary cell wall. However, what if any unique roles each isoform plays in the complex remain unclear. Here, we assessed the contributions of specific isoforms to microfibril synthesis. First, we expressed CESA isoforms of the primary cell wall or the moss Physcomitrium patens in Arabidopsis thaliana backgrounds missing a secondary cell wall CESA. While the primary cell wall isoforms rescued the cesa knockout phenotype with partial isoform specificity, those from the moss rescued with fewer restrictions. Then, we recreated various CESA missense mutations in all three of the secondary cell wall isoforms; while results are consistent with isoform specificity, they are difficult to interpret further without molecular structures. Finally, we show that catalytically inactive CESA isoforms restore growth and cellulose content in the corresponding knockout in an isoform-specific manner; along with partial rescue of the growth and cellulose content of the inflorescence stem, the replacement lines have fiber cells with partially disorganized microfibrils and secondary cell wall cellulose with narrow crystal width. Generally, effects were more pronounced in lines where CESA8 was inactivated compared with inactivating CESA4 or 7, which tended to have similar phenotypes to each other. Here, we account for these results with a model for cellulose synthase structure with the isoforms assigned specific localization within the cellulose synthase complex.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Molecular insight into the wetting behavior and amphiphilic character of cellulose nanocrystals

The study of nanocellulose is a field of growing interest due to its many applications and its use in the development of biocompatible and eco-friendly materials. In spite of the vast number of studies in the field, many questions about the role of the molecular structure in the properties of cellulose are still subject of debate. One of these fundamental questions is the possible amphiphilic nature of cellulose and the relative role of hydrogen bonding and hydrophobic effect on the interactions of cellulose. In this work we present an extensive molecular dynamics simulation study of this question by analyzing the wetting of cellulose with water and organic solvent, its interaction with hydrophilic and hydrophobic ions and its interaction with a protein (human epidermal growth factor, hEGF). We consider two characteristic cellulose crystal planes of Iβ cellulose with very different roughness, different hydrogen bonding capability and different exposure of cellulose hydrophobic groups (the (010) plane which has exposed –OH groups and the (100) plane with buried –OH groups). Our results show that both surfaces are simultaneously hydrophilic and lipophilic, with both surfaces having very similar contact angles. In spite of the global similarity of wetting of both surfaces, the molecular details of wetting are very different and substantial local wetting heterogeneities (which strongly depend on the surface) appear for both solvents. We also observe a weak interaction of both surfaces with hydrophobic and hydrophilic solutes. These weak interactions are attributed to the simultaneous lipophilic and hydrophilic character of both (100) and (010) cellulose surfaces. Interestingly, we found a substantial interaction of both cellulose planes with polar and apolar residues of the hEGF protein.

Malaspina, David C.↗
DOE OSTI2025

Improving cellulose attribution by selectively removing yeast glucans from grain fermentation intermediates

Abstract This article presents an industry-relevant method for quantifying cellulose in mixed substrate samples. We built upon the cellulosic glucan measurement proposed by Sluiter et al. (2021) to investigate significant cellulose loss under cold caustic conditions, which has hindered the establishment of an industrially relevant method. To overcome this issue, we used dimethyl sulfoxide (DMSO) as an alternative solvent, which avoids mercerization reactions (Budtova and Navard 2015) but may leave some resistant starch in the sample. Treatment via an enzyme mixture removed starch and conformed to US Environmental Protection Agency (EPA) guidance on cellulose measurement by establishing quantitative de-starching via nuclear magnetic resonance (EPA 2022). The selective removal of yeast beta-glucan was accomplished using a commercially available Zymolyase. Our results demonstrated excellent reproducibility, with coefficients of variance of 7.14% or less, when measuring cellulose in low cellulose content samples. The method was tested on relevant lab and plant samples, showing an average 0.9% ethanol derived from the conversion of cellulose when cellulase was added to the process and zero response when no cellulase was added. These findings indicate that a cellulose method using DMSO and pullulanase provides a complete and accurate view of cellulose content, composition, and conversion in industrial fermentation processes.

Sluiter, Justin [National Renewable Energy Laborat↗
DOE OSTI2025

Deep Eutectic Solvents for Efficient Fractionation of Lignocellulose to Produce Uncondensed Lignin and High-Quality Cellulose

Simultaneously inhibiting lignin condensation and cellulose degradation remains a major challenge for achieving holistic valorization of lignocellulose. Here, we developed a deep eutectic solvent (DES), composed of l-cysteine (Cys) and lactic acid (LA), to fractionate both uncondensed lignin and high-quality cellulose from eucalyptus wood by leveraging the unique properties of Cys, i.e., highly nucleophilic groups (–SH) and hydrogen bond acceptor/donor groups (–NH 2 and –COOH). The nucleophilic –SH in Cys effectively quenches the benzylic carbocations (C α + ions, formed at the benzylic sites of lignin) that lead to lignin condensation. This enables the high yield of uncondensed lignin (81%) with high retention of β–O–4 bonds (up to 90%). The separated uncondensed lignin is further depolymerized to prepare monophenols in a satisfactory 43% yield, equivalent to 73% of the theoretical yield. Moreover, the –NH 2 and –COOH groups in Cys form extensive hydrogen bonds with the hydroxyl groups in cellulose, thus decreasing the interaction energy of DES on cellulose. As a result, the cellulose achieves an astonishing 99% retention and maintains a high degree of polymerization of 1160. The obtained high-quality cellulose is further conversed into cellulose nanofibers for strong and transparent films. Furthermore, this study provides new insights into the efficient separation of uncondensed lignin and high-quality cellulose from lignocellulose by a novel DES system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Reduced type-A carbohydrate-binding module interactions to cellulose I leads to improved endocellulase activity

Dissociation of nonproductively bound cellulolytic enzymes from cellulose is hypothesized to be a key rate-limiting factor impeding cost-effective biomass conversion to fermentable sugars. However, the role of carbohydrate-binding modules (CBMs) in enabling nonproductive enzyme binding is not well understood. Here, we examine the subtle interplay of CBM binding and cellulose hydrolysis activity for three models type-A CBMs (Families 1, 3a, and 64) tethered to multifunctional endoglucanase (CelE) on two distinct cellulose allomorphs (i.e., cellulose I and III). We generated a small library of mutant CBMs with varying cellulose affinity, as determined by equilibrium binding assays, followed by monitoring cellulose hydrolysis activity of CelE–CBM fusion constructs. Finally, kinetic binding assays using quartz crystal microbalance with dissipation were employed to measure CBM adsorption and desorption rate constants kon and koff, respectively, towards nanocrystalline cellulose derived from both allomorphs. Overall, our results indicate that reduced CBM equilibrium binding affinity towards cellulose I alone, resulting from increased desorption rates (koff) and reduced effective adsorption rates (nkon), is correlated to overall improved endocellulase activity. Future studies could employ similar approaches to unravel the role of CBMs in nonproductive enzyme binding and develop improved cellulolytic enzymes for industrial applications.

59 BASIC BIOLOGICAL SCIENCES↗