Results for “carbon substrates” — Page 3

NASA NTRS1980

Calculation of residual principal stresses in CVD boron on carbon filaments

A three-dimensional finite element model of the chemical vapor deposition (CVD) of boron on a carbon substrate (B/C) is developed. The model includes an expansion of the boron after deposition due to atomic rearrangement and includes creep of the boron and carbon. Curves are presented to show how the principal residual stresses and the filament elongation vary as the parameters defining deposition strain and creep are varied. The calculated results are compared with experimental axial residual stress and elongation measurements made on B/C filaments. This comparison requires that for good agreement between calculated and experimental results, the deposited boron must continue to expand after deposition, and that the build-up of residual stresses is limited by significant boron and carbon creep rates.

Behrendt, D. R.↗

NASA NTRSDate not supplied

Biomanufacturing in Space: BioNutrients and CO2-Based Manufacturing

Biomanufacturing can provide on-demand production of mission-critical compounds and materials to support long-duration space exploration while circumventing the challenges of transporting materials from Earth. Synthetic Biology Project is developing two biomanufacturing capabilities: BioNutrients and CO2-Based Manufacturing. BioNutrients is an ongoing mission aboard the International Space Station focused on the production of perishable nutrients in an on demand for direct for consumption. The first flight experiment of this project targeted the production of carotenoids: β-carotene and zeaxanthin, in recombinant yeast strains. Since then, the project has expanded to encompass the production of the fermented consumables like yogurt and kefir for use as a nutrient delivery mechanism. The CO2-Based Manufacturing system aims to use in situ resources to allow for biomanufacturing with minimal re-supply required. The manufacturing platform is combined with an electrochemical CO2 conversion system which can produce simple carbon substrates to support microbial based biomanufacturing. A comprehensive ground-based platform for recombinant protein purification is in development with the goal of producing a thermostable carbonic anhydrase enzyme from E. coli utilizing CO2-derived acetate. Our group hopes to propel advancements in space biomanufacturing for long duration space flight by harnessing the tools of synthetic biology.

Matthew Brian Paddock↗

NASA NTRSDate not supplied

Harnessing Synthetic Biology for Biomanufacturing in Space: from Fermented Foods to Industrial Enzymes

Biomanufacturing can provide on-demand production of mission-critical compounds and materials to support long-duration space exploration while circumventing the challenges of transporting materials from Earth. Synthetic Biology Project is developing two biomanufacturing capabilities: BioNutrients and CO2-Based Manufacturing. BioNutrients is an ongoing mission aboard the International Space Station focused on the production of perishable nutrients in an on demand for direct for consumption. The first flight experiment of this project targeted the production of carotenoids: β-carotene and zeaxanthin, in recombinant yeast strains. Since then, the project has expanded to encompass the production of the fermented consumables like yogurt and kefir for use as a nutrient delivery mechanism. The CO2-Based Manufacturing system aims to use in situ resources to allow for biomanufacturing with minimal re-supply required. The manufacturing platform is combined with an electrochemical CO2 conversion system which can produce simple carbon substrates to support microbial based biomanufacturing. A comprehensive ground-based platform for recombinant protein purification is in development with the goal of producing a thermostable carbonic anhydrase enzyme from E. coli utilizing CO2-derived acetate. Our group hopes to propel advancements in space biomanufacturing for long duration space flight by harnessing the tools of synthetic biology.

synthetic biology↗

NASA NTRS2012

Enhanced-Adhesion Multi-Walled Carbon Nanotubes on Titanium Substrates for Stray Light Control

Carbon nanotubes previously grown on silicon have extremely low reflectance, making them a good candidate for stray light suppression. Silicon, however, is not a good structural material for stray light components such as tubes, stops, and baffles. Titanium is a good structural material and can tolerate the 700 C nanotube growth process. The ability to grow carbon nanotubes on a titanium substrate that are ten times blacker than the current NASA state-of-the-art paints in the visible to near infrared spectra has been achieved. This innovation will allow significant improvement of stray light performance in scientific instruments or any other optical system. This innovation is a refinement of the utilization of multiwalled carbon nano tubes for stray light suppression in spaceflight instruments. The innovation is a process to make the surface darker and improve the adhesion to the substrate, improving robustness for spaceflight use. Bright objects such as clouds or ice scatter light off of instrument structures and components and make it difficult to see dim objects in Earth observations. A darker material to suppress this stray light has multiple benefits to these observations, including enabling scientific observations not currently possible, increasing observational efficiencies in high-contrast scenes, and simplifying instruments and lowering their cost by utilizing fewer stray light components and achieving equivalent performance. The prior art was to use commercially available black paint, which resulted in approximately 4% of the light being reflected (hemispherical reflectance or total integrated scatter, or TIS). Use of multiwalled carbon nanotubes on titanium components such as baffles, entrance aperture, tubes, and stops, can decrease this scattered light by a factor of ten per bounce over the 200-nm to 2,500-nm wavelength range. This can improve system stray light performance by orders of magnitude. The purpose of the innovation is to provide an enhanced stray light control capability by making a blacker surface treatment for typical stray light control components. Since baffles, stops, and tubes used in scientific observations often undergo loads such as vibration, it was critical to develop this surface treatment on structural materials. The innovation is to optimize the carbon nanotube growth for titanium, which is a strong, lightweight structural material suitable for spaceflight use. The titanium substrate carbon nanotubes are more robust than those grown on silicon and allow for easier utilization. They are darker than current surface treatments over larger angles and larger wavelength range. The primary advantage of titanium substrate is that it is a good structural material, and not as brittle as silicon.

Hagopian, John↗

NASA NTRSDate not supplied

CO2-Based Manufacturing System for Recombinant Protein Production

Space biomanufacturing is a potential In Situ Resource Utilization (ISRU) strategy to provide critical consumables and products while minimizing the launched mass for long-duration, deep space missions. On Earth, the primary biological conversion of CO 2 to biomass is through photosynthesis, and sugars from photosynthetic organisms are used as feedstocks for microbial biomanufacturing. The efficiency of non-biological reduction of CO 2 to organic molecules, such as acetate or ethanol, has greatly increased in recent years. We are designing a biomanufacturing system to rely on electrochemical CO 2 conversion products for carbon substrates to support microbial growth and production of recombinant proteins. The preliminary design includes a gas-permeable membrane bioreactor with dry salts that are rehydrated and mixed with the carbon source to support growth of bacteria or yeast. The system architecture has a partially automated bioprocessing system to concentrate biomass and purify recombinant protein. This system is designed to operate semi-autonomously with minimal crew intervention. The specific use-case scenario is to produce a thermal stable carbonic anhydrase to increase the efficiency of a proposed liquid amine CO 2 removal subsystem of an environmental control and life-support system (ECLSS) on Mars.

Biomanufacturing↗

NASA NTRSDate not supplied

Development of a Space Compatible Biomanufacturing System

Space biomanufacturing is a potential In Situ Resource Utilization (ISRU) strategy to provide critical consumables and products while minimizing the launched mass for long-duration, deep space missions. On Earth, the primary biological conversion of CO 2 to biomass is through photosynthesis, and sugars from photosynthetic organisms are used as feedstocks for microbial biomanufacturing. The efficiency of non-biological reduction of CO 2 to organic molecules, such as acetate or ethanol, has greatly increased in recent years. We are designing a biomanufacturing system to rely on electrochemical CO 2 conversion products for carbon substrates to support microbial growth and production of recombinant proteins. The preliminary design includes a gas-permeable membrane bioreactor with dry salts that are rehydrated and mixed with the carbon source to support growth of bacteria or yeast. The system architecture has a partially automated bioprocessing system to concentrate biomass and purify recombinant protein. This system is designed to operate semi-autonomously with minimal crew intervention. The specific use-case scenario is to produce a thermal stable carbonic anhydrase to increase the efficiency of a proposed liquid amine CO 2 removal subsystem of an environmental control and life-support system (ECLSS) on Mars.

Recombinant↗

NASA NTRS1993

Low-gravity electrodeposition and growth of polymer thin films with large third-order optical nonlinearities by electrochemical processes for devices: Thiophene-based polymers

It has been proposed that NLO thin film properties may be improved by low-gravity processing. Strong candidates for NLO thin film applications are the polythiophenes. Polymeric thiophenes are attractive materials due to their ease of preparation, stability, and high X(exp 3). A simple and convenient method for preparation of polythiophenes is electrochemical oxidation. We will apply some of our experience and lessons learned in low-gravity metal, metal/cermet electrode position to improve the quality of polythiophene(s) thin films. In low gravity electrode position of Ni at a high rate on an Au substrate often results in the production of an x-ray non diffracting surface. Cobalt metal deposition does not give this result nor does Ni when deposited similarly on a glassy carbon substrate. Co/Ni alloy composition produced during electrode position is strongly dependent upon the amount of convection. Code position of neutral inert cermets with metals is influenced significantly by the presence of gravity and the size of the cermets. Tracks left in the 1-g surfaces by unsuccessful particle occlusion indicate suspension of the large particles is not the only reason for poor volume percentages of the larger particles in the deposits. All size particles are more homogeneously distributed in the deposits in low-gravity electrocodeposition than in 1-g. Low gravity gives larger volume percentages for the larger particles in the deposits, while 1-g gives larger volume percentages for the smaller particles. Intermediate size particles give mixed results. The experimental cells were constructed with flat electrode end plates such that 1-g bench reference electrode positions could be carried out at various orientations with respect to gravity. A series of bench studies using similar designed cells are suggested so that convection modification can be applied to electrochemical thin film preparation. Convection effects can then be coupled with other parameter variations in current, temperature, concentration, solvent, electrolyte, and anode substrates to optimize the properties of NLO thin films before resorting to low-gravity processing.

Penn, Benjamin G.↗

NASA NTRS1990

Catalytic carbide formation at aluminium-carbon interfaces

X-ray photoelectron spectroscopy investigations of the reaction of several monolayer-thick films of aluminum with glassy carbon substrates are presented. The influence of molecular oxygen and water vapor on the rate of reaction is examined. It is concluded that water vapor catalyzed the formation of aluminum carbide from aluminum and carbon by forming active sites which weakened carbon-carbon bonds at the glassy carbon surface, thus assisting their cleavage. The rate of carbide formation for undosed and molecular oxygen-dosed examples was less as neither metallic aluminum nor oxygen-formed alumina could bond to the carbon atom with sufficient strength to dissociate it quickly.

Maruyama, B.↗

NASA NTRS1981

Stabilizing platinum in phosphoric acid fuel cells

The cathode of the phosphoric acid fuel cell uses a high surface area platinum catalyst supported on a carbon substrate. During operation, the small platinum crystallites sinter, causing loss in cell performance. A support was developed that stabilizes platinum in the high surface area condition by retarding or preventing the sintering process. The approach is to form etch pits in the carbon by oxidizing the carbon in the presence of a metal oxide catalyst, remove the metal oxide by an acid wash, and then deposit platinum in these pits. Results confirm the formation of etch pits in each of the three supports chosen for investigation: Vulcan XC-72R, Vulcan XC-72 that was graphized at 2500 C, and Shawinigan Acetylene Black.

Remick, R. J.↗

NASA NTRS2004

Treated Carbon Nanofibers for Storing Energy in Aqueous KOH

A surface treatment has been found to enhance the performances of carbon nanofibers as electrode materials for electrochemical capacitors in which aqueous solutions of potassium hydroxide are used as the electrolytes. In the treatment, sulfonic acid groups are attached to edge plane sites on carbon atoms. The treatment is applicable to a variety of carbon nanofibers, including fibrils and both single- and multiple-wall nanotubes. The reason for choosing nanofibers over powders and other forms of carbon is that nanofibers offer greater power features. In previous research, it was found that the surface treatment of carbon nanofibers increased energy-storage densities in the presence of acid electrolytes. Now, it has been found that the same treatment increases energy-storage densities of carbon nanofibers in the presence of alkaline electrolytes when the carbon is paired with a NiOOH electrode. This beneficial effect varies depending on the variety of carbon substrate to which it is applied. It has been conjectured that the sulfonic acid groups, which exist in a deprotonated state in aqueous KOH solutions, undergo reversible electro-chemical reactions that are responsible for the observed increases in energystorage capacities. The increases can be considerable: For example, in one case, nanofibers exhibited a specific capacitance of 34 Farads per gram before treatment and 172 Farads per gram (an increase of about 400 percent) after treatment. The most promising application of this development appears to lie in hybrid capacitors, which are devices designed primarily for storing energy. These devices are designed to be capable of (1) discharge at rates greater than those of batteries and (2) storing energy at densities approaching those of batteries. A hybrid capacitor includes one electrode like that of a battery and one electrode like that of an electrochemical capacitor. For example, a hybrid capacitor could contain a potassium hydroxide solution as the electrolyte, a carbon capacitor electrode, and a nickel hydroxide battery electrode. By making the capacitor electrode of treated carbon nanofibers instead of another carbon material, one could obtain greater energy-storage capacity.

Firsich, David W.↗

NASA NTRS1967

An improved standard specimen for alignment of electron microscopes.

Vacuum evaporated tin microscopic particles on carbon substrate used as standard for electron microscope alignment

Carson, K. R.↗

NASA NTRS1974

Further development of chemical vapor deposition process for production of large diameter carbon-base monofilaments

The development of large diameter carbon-base monofilament in the 50 micron to 250 micron diameter range using the chemical vapor deposition process is described. The object of this program was to determine the critical process variables which control monofilament strength, monofilament modulus, and monofilament diameter. It was confirmed that wide scatter in the carbon substrate strength is primarily responsible for the scatter in the monofilament strength. It was also shown through etching experiments that defective substrate surface conditions which can induce low strength modular growth in the monofilament layers are best controlled by processing improvements during the synthesis of the substrate. Modulus was found to be linearily proportional to monofilament boron content. Filament modulus was increased to above 27.8MN/sq cm but only by a considerable increase in monofilament boron content to 60 wt. % or more. Monofilament diameter depended upon dwell time in the synthesis apparatus. A monofilament was prepared using these findings which had the combined properties of a mean U.T.S. of 398,000 N/sq cm, a modulus of 18.9 MN/sq cm (24,000,000 psi), and a diameter of 145 microns. Highest measured strength for this fiber was 451,000 N/sq cm (645,000 psi).

Hough, R. L.↗

NASA NTRS1975

Stopping cross sections for 0.25-3.0-MeV He-4 ions in cadmium sulfide

Stopping cross sections of He-4 ions with energies between 0.25 and 3.0 MeV have been measured for cadmium sulfide with a probable error of plus or minus 7% to 8%. The experimental method utilized the Rutherford backscattering technique and measured the energy loss of elastically scattered He-4 ions from films of cadmium sulfide sputtered on carbon substrates. The experimental data are compared with recent experimental and theoretical results.

Miller, W. E.↗

NASA NTRS1978

Assessment of free-living nitrogen fixing microorganisms for commercial nitrogen fixation

Ammonia production by Klebsiella pneumoniae is not economical with present strains and improving nitrogen fixation to its theoretical limits in this organism is not sufficient to achieve economic viability. Because the value of both the hydrogen produced by this organism and the methane value of the carbon source required greatly exceed the value of the ammonia formed, ammonia (fixed nitrogen) should be considered the by-product. The production of hydrogen by KLEBSIELLA or other anaerobic nitrogen fixers should receive additional study, because the activity of nitrogenase offers a significant improvement in hydrogen production. The production of fixed nitrogen in the form of cell mass by Azotobacter is also uneconomical and the methane value of the carbon substrate exceeds the value of the nitrogen fixed. Parametric studies indicate that as efficiencies approach the theoretical limits the economics may become competitive. The use of nif-derepressed microorganisms, particularly blue-green algae, may have significant potential for in situ fertilization in the environment.

Stokes, B. O.↗

NASA NTRS1979

Hydrogen atom initiated chemistry

H Atoms have been created by the photolysis of H2S. These then initiated reactions in mixtures involving acetylene-ammonia-water and ethylene-ammonia-water. In the case of the acetylene system, the products consisted of two amino acids, ethylene and a group of primarily cyclic thio-compounds, but no free sulfur. In the case of the ethylene systems, seven amino acids, including an aromatic one, ethane, free sulfur, and a group of solely linear thio-compounds were produced. Total quantum yields for the production of amino acids were about 3 x 10 to the -5th and about 2 x 10 to the -4th with ethylene and acetylene respectively as carbon substrates. Consideration is given of the mechanism for the formation of some of the products and implications regarding planetary atmosphere chemistry, particularly that of Jupiter, are explored.

Hong, J. H.↗

NASA NTRS1979

Completion of the Viking Labeled Release experiment on Mars

The final Labeled Release (LR) cycle on each Viking lander tested a surface sample that had been stored for several months at approximately 10 C prior to the onset of the active sequence. At each lander site, activity was strongly diminished. This thermal sensitivity of the active agent on the surface of Mars is consistent with a biological explanation of the LR experiment. At the end of one of these cycles, the incubation mixture was heated to 50 C to release any radioactive gas trapped in the sample matrix. The results suggest that more than one carbon substrate is involved in the LR reaction on Mars. The thermal data from the stored samples, coupled with data from previous cycles, have formed the basis for evaluation of the thermal decomposition of the Mars active agent. The slope of the resulting Arrhenius plot has been used to test the fit of other flight data and to calculate the activation energy for thermal decomposition of the Mars agent. The results and their interpretation still leave unresolved the question of whether the Mars LR data were generated by biological or chemical activity.

Levin, G. V.↗

NASA NTRS1996

Redox Disproportionation of Glucose as a Major Biosynthetic Energy Source

Previous studies have concluded that very little if any energy is required for the microbial biosynthesis of amino acids and lipids from glucose -- processes that yield almost as much ATP (adenosine triphosphate) as they consume. However, these studies did not establish the strength nor the nature of the energy source driving these biological transformations. To identify and estimate the strength of the energy source behind these processes, we calculated the free energy change due to the redox disproportionation of substrate carbon of (a) 26 redox-balanced fermentation reactions, and (b) the biosynthesis of amino acids, lipids, and nucleotides of E. coli from glucose. A plot of the negative free energy of these reactions per mmole of carbon as a function of the number of disproportionative electron transfers per mmol of carbon showed that the energy yields of these fermentations and biosyntheses were directly proportional to the degree of redox disproportionation of carbon. Since this linear relationship showed that redox disproportionation was the dominant energy source of these reactions, we were able to establish that amino acid and lipid biosynthesis obtained most of their energy from redox disproportionation (greater than 94%). In contrast nucleotide biosynthesis was not driven by redox disproportionation of carbon, and consequently depended completely on ATP for energy. This crucial and previously unrecognized role of sugars as an energy source of biosynthesis suggests that sugars were involved at the earliest stage in the origin of anabolic metabolism.

Weber, Arthur L.↗

NASA NTRS1994

Amorphous to Amorphous Form Transitions of Water Ice and Astrophysical Implications

We have combined Selected Area Electron Diffraction (SAED) and cryogenic techniques in an instrumental configuration that allows observing the structure of vapor deposited ice as it evolves during warmup. The ice is deposited in-situ inside an Hitachi H-500 H transmission electron microscope at a base pressure of 1-5 x 10(exp -7) torr on a thin amorphous carbon substrate at 15K or 86K and warmed up at a rate of 1-2 K/min. We find a progression of amorphous forms and well defined amorphous to amorphous transitions. Apart from the well known low-density form of ice, we confirm the presence of a high-density form and find a third amorphous form that coexists with cubic ice. We will report too on the amorphous to crystalline transition and the implications of these results for radical diffusion and gas retention observed in laboratory analog studies of interstellar and cometary ices.

Jenniskens, Peter↗