Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “carbon removal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

A Comprehensive Greenhouse Gas Assessment of Biomass-Based Carbon Dioxide Removal and Storage

Biomass with Carbon Removal and Sequestration (BiCRS) is a suite of technological pathways that provide a relatively affordable and high-potential way to remove carbon dioxide from the atmosphere and simultaneously re-purpose residual biomass. BiCRS technologies are individually optimized to different biomass feedstocks, temperatures and oxygen, with the goal of capturing a high percentage of biomass-derived carbon dioxide and storing it in permanent below-ground storage (i.e. geologic storage). The current standard for BiCRS life cycle assessments does not account for carbon dioxide, methane and nitrous oxide (CO 2 , CH 4 , and N 2 O) fluxes from surface soil amendment of BiCRS byproducts (e.g. char, ash) and their alternate fates. This is partly due to a paucity of empirical data due to the novelty of BiCRS conversion technologies, the range in feedstocks, and the heterogeneity of soils to which they might be amended. To fill this gap in in the life-cycle assessment (LCA) and provide a realistic range of parameters for a soil amendment component of the BiCRS LCA, we conducted an incubation experiment to measure soil carbon changes, microbial respiration, methane fluxes, and nitrous oxide fluxes from two different soils amended with char- and ash- byproducts from biomass after gasification to hydrogen, fast pyrolysis to bio-oil, and torrefaction.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

ASU’s DAC polymer-enhanced cyanobacterial bioproductivity (AUDACity)

ASU’s DAC polymer-enhanced cyanobacterial bioproductivity (AUDACity) project aims to demonstrate a novel, scalable method for removing carbon dioxide (CO 2 ) directly from ambient air and delivering it to cyanobacterial cultures to produce commodity biofuel, mid-value protein for supplements, and high value phycocyanin (PC), a natural blue colorant (Figure A). This approach uses low-cost, reusable anion exchange polymers embedded in modular mesh packets, which capture CO 2 during drying cycles when exposed to ambient air, and release concentrated CO 2 into aqueous cultivation systems. The project addresses a critical challenge in energy research needed for developing sustainable, economically viable methods of Direct Air Capture (DAC) that can be integrated with bio-based systems for fuel and chemical production. AUDACity contributes to scientific understanding by integrating materials chemistry, cyanobacterial biology, and system engineering to create a distributed CO 2 delivery platform. Key insights have emerged around the design of biocompatible sorbents, optimization of CO 2 capture-release cycles, and durability of packet-based delivery systems under outdoor conditions. Notably, the team has synthesized and tested a range of polymer sorbents, identified mechanisms of material degradation and fouling, and advanced both lab- and pilot-scale cultivation systems to evaluate performance. From a technical and economic standpoint, AUDACity shows promise for achieving cost-effective CO 2 capture and delivery into aqueous media and biofuel production. Preliminary techno-economic analysis (TEA) indicates that the DAC system based on current performance can reach $\$$680/tonne CO 2 delivered into aqueous solution; with reasonable improvements to sorbent lifetime, sorbent capacity, reducing water uptake the approach could reach $\$$66/tonne by avoiding the need for energy-intensive sorbent regeneration and CO 2 compression, making it more feasible for decentralized deployment. With these costs for CO 2 and by extracting and selling high-value PC ($\$$50/kg) and mid-value protein supplement ($\$$6/kg), the remaining biomass can be hydrothermally treated into biofuel for $\$$2.50/gallon, and would support a small first-of-a-kind biorefinery capable of producing 500 barrels per day of biofuel. The project offers meaningful public benefits by advancing carbon removal technologies that are low-energy, modular, and adaptable to non-arable land and brackish water use. It aligns with national goals to develop advanced biotechnology and supports future pathways for bio-based fuels and products. By enabling direct coupling of CO 2 transfer into aqueous medium and biological carbon utilization, AUDACity lays the groundwork for effective algae cultivation without wasteful CO 2 delivery and is a promising and innovative solution for low-carbon fuel and bioproduct generation contributing to a vigorous bioeconomy.

09 BIOMASS FUELS↗
NASA NTRS1995

Bicarbonate of soda paint stripping process validation and material characterization

The Aircraft Production Division at San Antonio Air Logistics Center has conducted extensive investigation into the replacement of hazardous chemicals in aircraft component cleaning, degreasing, and depainting. One of the most viable solutions is process substitution utilizing abrasive techniques. SA-ALC has incorporated the use of Bicarbonate of Soda Blasting as one such substitution. Previous utilization of methylene chloride based chemical strippers and carbon removal agents has been replaced by a walk-in blast booth in which we remove carbon from engine nozzles and various gas turbine engine parts, depaint cowlings, and perform various other functions on a variety of parts. Prior to implementation of this new process, validation of the process was performed, and materials and waste stream characterization studies were conducted. These characterization studies examined the effects of the blasting process on the integrity of the thin-skinned aluminum substrates, the effects of the process on both air emissions and effluent disposal, and the effects on the personnel exposed to the process.

Haas, Michael N.↗
DOE OSTI2026

A Comprehensive Greenhouse Gas Assessment of Biomass-Based Carbon Dioxide Removal and Storage

Biomass-based Carbon Removal and Storage (BiCRS) is a suite of technological pathways that provide a relatively affordable and high-potential way to remove carbon dioxide from the atmosphere and simultaneously re-purpose residual biomass. BiCRS technologies are individually optimized to different biomass feedstocks, temperatures and oxygen, with the primary goal of capturing a high percentage of biomass-derived carbon dioxide and storing it in permanent below-ground storage (i.e. geologic storage), and a secondary goal of producing renewable energy. The current standard for BiCRS life cycle assessments does not account for greenhouse gas (carbon dioxide, methane and nitrous oxide) fluxes from surface soil amendment of BiCRS byproducts (e.g. char, ash) and their alternate fates. This is partly due to a paucity of empirical data due to the novelty of BiCRS conversion technologies, the range in feedstocks, and the heterogeneity of soils to which they might be amended. To fill this gap in in the life-cycle assessment and provide a realistic range of parameters for a soil amendment component of the BiCRS life cycle assessment, we conducted an incubation experiment to measure soil carbon changes, microbial respiration, methane fluxes, and nitrous oxide fluxes from two different soils amended with char- and ash- byproducts from biomass after gasification to hydrogen, fast pyrolysis to bio-oil, and torrefaction. Our results suggest that nitrous oxide and methane emission or consumption from BiCRS char amendments to soil are context dependent. Nitrous oxide emissions from amendments are higher in soils with higher pH, whereas some char amendments to low pH soil can reduce N 2 O emissions relative to control. In contrast, methane is emitted from BiCRS char amended to low pH soil, but consumed or neutral relative to control when amended to high pH soil. We present carbon and nitrogen mass balance throughout the experiment to help understand short-term durability of BiCRS chars and their counterfactuals, and preliminary suggestions for revisions to the broader BiCRS Measurement, Reporting, and Verification framework.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2018

Axiomatic Design Based Analysis and Equivalent Mass Comparison of Alternate Air Revitalization Systems

A proposed Photocatalytic Air Processor (PAP) would combine two atmosphere revitalization functions for a crewed spacecraft, carbon dioxide removal and oxygen provision. The axiomatic design method is used to develop the general requirements and alternate system designs that combine these two atmosphere revitalization functions. There are two current atmosphere revitalization approaches. Short missions such as the space shuttle use lithium hydroxide (LiOH) to remove carbon dioxide and tanks to provide oxygen. The ISS (International Space Station) uses the CDRA (Carbon Dioxide Removal Assembly) to remove carbon dioxide and a Sabatier reactor and OGA (Oxygen Generation Assembly) to provide oxygen. The PAP could replace either of these combined systems, LiOH and oxygen tanks or the CDRA, Sabatier, and OGA. Axiomatic design is used to investigate these alternate high level system designs for atmosphere revitalization. The axiomatic design approach develops the requirements and design together from higher to lower system level, using a back-and-forth and top-down process. One objective is to reduce the coupling between design elements, which is a measure of system complexity. The equivalent system mass of the alternate systems is compared.

Jones, Harry W.↗
DOE OSTI2023

Emerging concepts in intermediate carbon dioxide emplacement to support carbon dioxide removal

Substantial upscaling of carbon dioxide capture is possible in the coming decades but existing solutions for storage are projected to be limited in annual capacity by as much as 2–10 GtCO 2 per year until mid-century. Temporary storage of CO 2 in a solid or liquid state could prove useful for filling this gap in capacity, until more permanent and ideally lucrative CO 2 sequestration options come online. There are several concepts for reversible solid-state and chemical CO 2 storage, but their advantages and limitations have yet to be reviewed in this context. This article focuses on the physical and chemical aspects of CO 2 storage via liquid and solid chemical carriers and sorbents, and gives an overview of the energetics around their use, as well as prospects for their future development. Exciting opportunities for coupling capture and medium to high maturity multi-year storage technologies could support carbon removal in the coming decades. Highlights of the analysis are the remarkable storage capacity of oxalic acid and formic acid (CO 2 -density of 1857 kg m –3 and 1152 kg m –3 , compared with condensed liquid CO 2 at 993–1096 kg m –3 , respectively), the relative scalability and compatibility of carbonate salts for stationary storage with direct air capture, and the potential promise of multiple carriers for CO 2 transportation. Solid sorbents do not achieve such ultra-high storage capacities, but could improve storage over compressed gas tanks on a capacity and energetics basis.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Metrics for quantifying the efficiency of atmospheric CO 2 reduction by marine carbon dioxide removal (mCDR)

Abstract Marine carbon dioxide removal (mCDR) is gaining interest as a tool to meet global climate goals. Because the response of the ocean–atmosphere system to mCDR takes years to centuries, modeling is required to assess the impact of mCDR on atmospheric CO 2 reduction. Here, we use a coupled ocean–atmosphere model to quantify the atmospheric CO 2 reduction in response to a CDR perturbation. We define two metrics to characterize the atmospheric CO 2 response to both instantaneous ocean alkalinity enhancement (OAE) and direct air capture (DAC): the cumulative additionality ( α ) measures the reduction in atmospheric CO 2 relative to the magnitude of the CDR perturbation, while the relative efficiency ( ϵ ) quantifies the cumulative additionality of mCDR relative to that of DAC. For DAC, α is 100% immediately following CDR deployment, but declines to roughly 50% by 100 years post-deployment as the ocean degasses CO 2 in response to the removal of carbon from the atmosphere. For instantaneous OAE, α is zero initially and reaches a maximum of 40%–90% several years to decades later, depending on regional CO 2 equilibration rates and ocean circulation processes. The global mean ϵ approaches 100% after 40 years, showing that instantaneous OAE is nearly as effective as DAC after several decades. However, there are significant geographic variations, with ϵ approaching 100% most rapidly in the low latitudes while ϵ stays well under 100% for decades to centuries near deep and intermediate water formation sites. These metrics provide a quantitative framework for evaluating sequestration timescales and carbon market valuation that can be applied to any mCDR strategy.

Yamamoto, Kana (ORCID:0009000731519234)↗
NASA NTRS1993

Copper crystallite in carbon molecular sieves for selective oxygen removal

Carbon molecular sieves modified by the incorporation of finely divided elemental copper useful for the selective sorption of oxygen at elevated temperatures. The carbon molecular sieves can be regenerated by reduction with hydrogen. The copper modified carbon molecular sieves are prepared by pyrolysis of a mixture of a copper-containing material and polyfurfuryl alcohol to form a sorbent precursor. The sorbent precursors are then heated and reduced to produce copper modified carbon molecular sieves. The copper modified carbon molecular sieves are useful for sorption of all concentrations of oxygen at temperatures up to about 200.degree. C. They are also useful for removal of trace amount of oxygen from gases at temperatures up to about 600.degree. C.

Sharma, Pramod K.↗
NASA NTRS1992

Copper modified carbon molecular sieves for selective oxygen removal

Carbon molecular sieves modified by the incorporation of finely divided elemental copper useful for the selective sorption of oxygen at elevated temperatures. The carbon molecular sieves can be regenerated by reduction with hydrogen. The copper modified carbon molecular sieves are prepared by pyrolysis of a mixture of a copper-containing material and polyfunctional alcohol to form a sorbent precursor. The sorbent precursors are then heated and reduced to produce copper modified carbon molecular sieves. The copper modified carbon molecular sieves are useful for sorption of all concentrations of oxygen at temperatures up to about 200.degree. C. They are also useful for removal of trace amount of oxygen from gases at temperatures up to about 600.degree. C.

Sharma, Pramod K.↗
DOE OSTI2026

Preparing California’s Cap-and-Trade Program for 2045: Integrating Carbon Dioxide Removal

To meet California’s legislatively mandated 2045 carbon neutrality target (AB 1279, Muratsuchi), analyses from the California Air Resources Board (CARB) and Lawrence Livermore National Laboratory (LLNL) have shown that carbon dioxide removal—activities that permanently remove carbon dioxide (CO 2 ) from the atmosphere—will be necessary to remove greenhouse gas emissions that are otherwise too costly or difficult to reduce. This policy brief explores the policy, legal, and technical considerations for integrating carbon dioxide removal into the Cap-and-Trade Program.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2004

Measurement of Trace Water Vapor in a Carbon Dioxide Removal Assembly Product Stream

The International Space Station Carbon Dioxide Removal Assembly (CDRA) uses regenerable adsorption technology to remove carbon dioxide (COP) from cabin air. Product water vapor measurements from a CDRA test bed at the NASA Marshall Space Flight Center were made using a tunable infrared diode laser differential absorption spectrometer (TILDAS) provided by NASA Glenn Research Center. The TILDAS instrument exceeded all the test specifications, including sensitivity, dynamic range, time response, and unattended operation. During the COP desorption phase, water vapor concentrations as low as 5 ppmv were observed near the peak of CO2 evolution, rising to levels of approx. 40 ppmv at the end of a cycle. Periods of high water concentration (>100 ppmv) were detected and shown to be caused by an experimental artifact. Measured values of total water vapor evolved during a single desorption cycle were as low as 1 mg.

Wormhoudt, Joda↗
DOE OSTI2025

A techno-economic assessment of carbon dioxide removal pathways via biochemical conversion of lignocellulose to biofuels and bioplastics

Biomass carbon removal and storage (BiCRS) is a promising pathway to mitigate climate change via large scale removal of atmospheric carbon dioxide (CO 2 ). We modeled several fermentation technologies, producing a variety of bioproducts from lignocellulosic feedstocks, to understand their levelized cost of CO 2 removal under multiple scenarios. Lifecycle greenhouse gas (GHG) emissions are accounted to provide cradle-to-grave estimates of carbon intensity (CI). We did not account for the avoided fossil CO 2 emissions from the use of biofuels in our CO 2 removal cost calculations, because avoided emissions do not contribute to CO 2 removal. The main products from the fermentation technologies we modeled include renewable diesel, ethanol, sustainable aviation fuel (SAF), and polyethylene (PE), with co-products including CO 2 , adipic acid, steam, and electricity. PE, depending on its end-of-life management, can serve as a form of biogenic carbon storage. PE has the potential to remove 1.2–1.5 tCO 2 per dry t-biomass, whereas biofuels have the potential to remove 0.3–0.9 tCO 2 per dry t-biomass, indicating that PE production is a more efficient method of carbon removal. We quantify costs of CO 2 removal to be $\$$60 – $\$$675 per metric tCO 2 removed across the various fermentation pathways. Under the scenarios analyzed, bioplastic production from lignocellulosic biomass is a more cost-effective route to CO 2 removal than biofuel production, with costs of CO 2 removal via bioplastics being 50–90 % lower than that of biofuels. Future research should explore the potential benefits and drawbacks of expanding bioplastic production for large-scale CO 2 removal.

09 BIOMASS FUELS↗
NASA NTRS2009

Carbon Dioxide Removal Troubleshooting aboard the International Space Station (ISS) during Space Shuttle (STS) Docked Operations

The International Space Station (ISS) represents a largely closed-system habitable volume which requires active control of atmospheric constituents, including removal of exhaled Carbon Dioxide (CO2). The ISS provides a unique opportunity to observe system requirements for (CO2) removal. CO2 removal is managed by the Carbon Dioxide Removal Assembly (CDRA) aboard the US segment of ISS and by Lithium Hydroxide (LiOH) aboard the Space Shuttle (STS). While the ISS and STS are docked, various methods are used to balance the CO2 levels between the two vehicles, including mechanical air handling and management of general crew locations. Over the course of ISS operation, several unexpected anomalies have occurred which have required troubleshooting, including possible compromised performance of the CDRA and LiOH systems, and possible imbalance in CO2 levels between the ISS and STS while docked. This paper will cover efforts to troubleshoot the CO2 removal systems aboard the ISS and docked STS.

Matty, Christopher M.↗
NASA NTRS2010

Analyses of the Integration of Carbon Dioxide Removal Assembly, Compressor, Accumulator and Sabatier Carbon Dioxide Reduction Assembly

A tool has been developed by the Sabatier Team for analyzing/optimizing CO2 removal assembly, CO2 compressor size, its operation logic, water generation from Sabatier, utilization of CO2 from crew metabolic output, and Hz from oxygen generation assembly. Tests had been conducted using CDRA/Simulation compressor set-up at MSFC in 2003. Analysis of test data has validated CO2 desorption rate profile, CO2 compressor performance, CO2 recovery and CO2 vacuum vent in CDRA desorption. Optimizing the compressor size and compressor operation logic for an integrated closed air revitalization system Is being conducted by the Sabatier Team.

Jeng, Frank F.↗
NASA NTRS2011

Carbon Dioxide Removal via Passive Thermal Approaches

A paper describes a regenerable approach to separate carbon dioxide from other cabin gases by means of cooling until the carbon dioxide forms carbon dioxide ice on the walls of the physical device. Currently, NASA space vehicles remove carbon dioxide by reaction with lithium hydroxide (LiOH) or by adsorption to an amine, a zeolite, or other sorbent. Use of lithium hydroxide, though reliable and well-understood, requires significant mass for all but the shortest missions in the form of lithium hydroxide pellets, because the reaction of carbon dioxide with lithium hydroxide is essentially irreversible. This approach is regenerable, uses less power than other historical approaches, and it is almost entirely passive, so it is more economical to operate and potentially maintenance- free for long-duration missions. In carbon dioxide removal mode, this approach passes a bone-dry stream of crew cabin atmospheric gas through a metal channel in thermal contact with a radiator. The radiator is pointed to reject thermal loads only to space. Within the channel, the working stream is cooled to the sublimation temperature of carbon dioxide at the prevailing cabin pressure, leading to formation of carbon dioxide ice on the channel walls. After a prescribed time or accumulation of carbon dioxide ice, for regeneration of the device, the channel is closed off from the crew cabin and the carbon dioxide ice is sublimed and either vented to the environment or accumulated for recovery of oxygen in a fully regenerative life support system.

Lawson, Michael↗
NASA NTRSDate not supplied

Comparison of Alternative Configurations of an Integrated Open-Loop Carbon Dioxide Removal System using Liquid Amine

Several carbon dioxide removal systems are being investigated for applications in microgravity. The liquid amine wedge system utilizes the capillary action of liquids to prevent the mixing of the air and liquid while still allowing for carbon dioxide capture at their interface. A one crew mission requires approximately 1 kg per day of carbon dioxide removal to prevent adverse health effects. A proposed design of a wedge tray system can be improved from the initial testing parameters to achieve the required carbon dioxide capture for one crew. The wedge trays in the contactor can be organized in either a parallel configuration to accumulate less CO2 in the liquid but at a higher flow rate or a series configuration to yield a higher weight percentage of CO2 in the liquid but at a lower flow rate. The gas flow rate and composition were held constant at 26scfm and 2600ppm, respectively, due to constraints of other proposed systems but the liquid flow rate was adjusted between 0.1mL/min and 10mL/min. The flow rate that yielded the best carbon dioxide capture was X mL/min and Y mL/min for the parallel and series configurations, respectively. The degasser temperature and pressure were varied from 80 to 100°C and 0 and -3 inHg. The largest carbon dioxide flux of Z kg/day/m2 was observed at a contactor liquid flow rate of X mL/min and a degasser temperature and pressure of T°C and P inHg.

Adrian Cortez↗