Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “biomaterials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Atrazine Degradation Using Immobilized Triazine Hydrolase from Arthrobacter aurescens TC1 in Mesoporous Silica Nanomaterials

Triazine hydrolase fromArthrobacter aurescens TC1 (TrzN) was successfully immobilized on mesoporous silica nanomaterials (MSNs) for the first time. For both nonfunctionalized MSNs and MSNs functionalized with Zn(II), three pore sizes were evaluated for their ability to immobilize wild-type TrzN: Mobile composition of matter no. 41 (small, 3 nm pores), mesoporous silica nanoparticle material with 10 nm pore diameter (MSN-10) (medium, 6-12 nm pores), and pore-expanded MSN-10 (large, 15-30 nm pores). Of these six TrzN:MSN biomaterials, it was shown that TrzN:MSN-10 was the most active (3.8 +/- 0.4 x 10 -5 U/mg) toward the hydrolysis of a 50 uM atrazine solution at 25 degrees C. The TrzN:MSN-10 biomaterial was then coated in chitosan (TrzN:MSN-10:Chit) as chitosan has been shown to increase stability in extreme conditions such as low/high pH, heat shock, and the presence of organic solvents. TrzN:MSN-10:Chit was shown to be a superior TrzN biomaterial to TrzN:MSN-10 as it exhibited higher activity under all storage conditions, in the presence of 20% MeOH, at low and high pH values, and at elevated temperatures up to 80 degrees C. Finally, the TrzN:MSN-10:Chit biomaterial was shown to be fully active in river water, which establishes it as a functional biomaterial under actual field conditions. A combination of these data indicate that the TrzN:MSN-10:Chit biomaterial exhibited the best overall catalytic profile making it a promising biocatalyst for the bioremediation of atrazine.

09 BIOMASS FUELS↗
DOE OSTI2021

Additively Manufactured Power Poles

The objective of this project was to explore the utility of native grown biomaterials for the portable production of power poles. In this Phase 1 project, activities were broken into two tasks: 1) baseline efforts to show feasibility of printed biomaterial power poles and 2) produce a conceptual design of portable pole production. The results were very promising, showing sufficient mechanical properties from printed biomaterials as well as conceptual designs for, and successful demonstration of, printed power poles.

42 ENGINEERING↗
DOE OSTI2022

Characterization of a Human Platelet Lysate-Loaded Keratin Hydrogel for Wound Healing Applications In Vitro

One of the promising approaches to facilitate healing and regenerative capacity includes the application of growth-factor-loaded biomaterials. Human platelet lysate (hPL) derived from platelet-rich plasma through a freeze-thaw process has been used as a growth factor rich therapeutic in many regenerative applications. To provide sustained local delivery of the hPL-derived growth factors such as epidermal growth factor (EGF), the hPL can be loaded into biomaterials that do not degrade rapidly in vivo. Keratin (KSO), a strong filamentous protein found in human hair, when formulated as a hydrogel, is shown to sustain the release of drugs and promote wound healing. In the current study, we created a KSO biomaterial that spontaneously forms a hydrogel when rehydrated with hPL that is capable of controlled and sustained release of pro-regenerative molecules. Our study demonstrates that the release of hPL is controlled by changing the KSO hydrogel and hPL-loading concentrations, with hPL loading concentrations having a greater effect in changing release profiles. In addition, the 15% KSO concentration proved to form a stable hydrogel, and supported cell proliferation over 3 days without cytotoxic effects in vitro. The hPL-loaded keratin hydrogels show promise in potential applications for wound healing with the sustained release of pro-regenerative growth factors with easy tailoring of hydrogel properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Advanced Design and 3D Printing Strategies With Alginate‐Nanoclay Nanocomposites: From Microstructure to Bioprinting

Nanocomposites made from alginate and nanoclay are extensively applied for diverse biomedical applications. However, the lack of a clear understanding of the interactions between alginate and nanoclay makes it difficult to rationally design the nanocomposites for different material extrusion-based 3D bioprinting strategies. Here, a combined analytical model is proposed to accurately predict the interaction mechanisms between alginate and nanoclay through small-angle neutron scattering. These mechanisms are summarized into a phase diagram that can guide the design of alginate-nanoclay nanocomposites for different bioprinting applications. The rheological properties of various nanocomposites are measured to validate the proposed interaction mechanisms at the macroscale. Accordingly, three representative extrusion-based bioprinting strategies are linked with the nanocomposite design and applied to freeform fabricate complex structures. In conclusion, a roadmap is summarized to bridge the gap between biomaterial design and bioprinting processes, enabling the rapid and rational selection of biomaterial formula based on available 3D printing methods, and vice versa.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Nanoengineered Shape-Memory Hemostat

Uncontrolled hemorrhage is the predominant cause of preventable combat deaths. Various biomaterials serve as hemostatic agents due to their procoagulant or absorptive activity. However, these biomaterials often lack expansion capabilities, which severely limits use in noncompressible wounds. This study combines a hemostatic nanocomposite with a shape-memory polymer foam to design a composite material with both hemostatic and physical expansion properties. This composite is fabricated in two formulations: a foam externally coated in a highly concentrated nanocomposite (“coated composite”) and a foam containing a diluted nanocomposite infused throughout its pores (“infused composite”). Both formulations retain the shape-memory foam's expansion property. Further, the coated composite shows improved fluid uptake (>2-fold) versus infused composites or foam. The nanocomposite component dissociates from the foam under degradative conditions, with the foam remaining stable for 30 days. Hemostatic studies illustrate that the coated composite reduces the clotting time by ≈20%. Alternatively, the infused composite improves clotting over a larger distance (up to ≈2× distance from the composite). These results signify a modular hemostatic ability: the coated composite reduces clotting and improves fluid uptake, while the infused composite achieves diffuse clotting and maintains mechanical properties. Thus, these materials pose a strong potential for use in noncompressible wounds.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Microscale dynamics in thermoreversible hydrogels: Impact of probe size and concentration

Passive microrheology techniques using dynamic light scattering (DLS) and X-ray photon correlation spectroscopy (XPCS) have emerged as important techniques for characterizing the dynamics and viscoelastic properties of soft polymeric biomaterials. However, the impact of probe particle type, size, and concentration are important considerations in interpretation of results and comparison to properties obtained from bulk rheology measurements. In this work, we investigate a model thermoreversible polymeric hydrogel and compare results from DLS-microrheology with different size and concentrations of polystyrene probe particles and XPCS-microrheology with inorganic nanoparticles. We obtained trends that aligned most closely with the macroscopic rheology with probe particles that are slightly larger than the characteristic length scale of the gel structure, but within the same order of magnitude. By contrast, larger probe particles yielded microrheology data that are more dominated by elastic behavior than what we might expect from bulk rheology experiments, while use of small inorganic nanoparticles in XPCS-microrheology resulted in a more a more viscous response than would be expected based on the bulk rheology. Finally, this study demonstrates the utility of passive DLS- and XPCS-based microrheology in characterizing the rheological properties of complex polymeric biomaterials, while also highlighting important considerations in experimental design and choice of type, size, and concentration of probe particles used.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Foundational insights into the mechanical and molecular evolution of porcine skin gelatin during gelation

Gelatin is a widely used material in biomedical fields, particularly in regenerative medicine and tissue engineering, due to its biocompatibility and versatile properties. While prior research has explored methods to enhance gelatin's mechanical strength and stability, fundamental studies on gelatin, specifically its curing process, mechanical stiffness, and chemical evolution during gelation, remain limited. This study uses ultrasonic testing and Fourier Transform Infrared Spectroscopy (FTIR) to examine gelatin's stiffness and molecular changes during gelation. Samples of 175 and 300 Porcine Skin Bloom Strength Gelatin at concentrations of 2% and 6% (w/v) were analyzed. Through transmission ultrasonic testing helped identify key transition points in gelation, with higher concentrations exhibiting delayed transitions. FTIR revealed that C-N bond formation peaks early while N-H bond deformation persists. A correlation emerged between sound speed and peak absorbance, suggesting that changes in molecular mobility may contribute to the observed sound speed behavior during periods of active bond formation. However, as gelation continues, fewer bonding components may be available, potentially decreasing molecular movement and contributing to the observed increase in sound speed. These findings provide insights into gelatin's mechanical and chemical evolution, offering a framework for improved control over its gelation kinetics. Swept-Frequency Acoustic Interferometry (SFAI) was performed at the end of the curing process to measure the sound speed, enabling the calculation of the bulk moduli of the gelatin samples. The combined use of ultrasonic and FTIR testing provides a non-destructive method for characterizing gelatin and other biomaterials. This approach advances understanding of gelatin curing behavior and supports the development of safer biomaterials with tailored mechanical properties for various applications such as tissue engineering and regenerative medicine.

Biomaterials↗
DOE OSTI2026

Applications of Decellularized Plant Tissues in Regenerative Medicine and Tissue Engineering

The development of biomaterials capable of supporting complex tissue growth remains a central challenge in regenerative medicine and tissue engineering, particularly in replicating the structural, mechanical, and transport functions of native extracellular matrices. While decellularized animal tissues have demonstrated significant success as scaffolds for tissue engineering, they are still constrained by cost, immunogenicity, and ethical concerns. In recent years, decellularized plant tissues have emerged as a compelling alternative scaffold platform due to their inherent vascular architectures, ethical sourcing, tunable mechanical properties, cytocompatibility, and sustainability. This review summarizes current strategies for the decellularization of plant tissues, including chemical, enzymatic, and physical approaches, and discusses how these methods preserve plant cell wall structure while removing immunogenic components. Advances in surface loading and functionalization, including protein coatings, oxidation, nanoparticle incorporation, peptide conjugation, and bioactive molecule loading, have further enhanced cell adhesion, differentiation, biodegradability, and immunomodulation. Recent applications of decellularized plant scaffolds in cardiac, skeletal muscle, bone, nerve, and wound healing contexts are reviewed, highlighting proof-of-concept successes and remaining challenges. Beyond therapeutic applications, plant-derived scaffolds have also enabled physiologically relevant in vitro models for vascular biology, mechanotransduction, cancer, metabolic tissues, and drug response studies. Collectively, these advances position decellularized plant tissues as versatile, low-cost, and ethically favorable biomaterials with growing relevance for both regenerative medicine and tissue modeling.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Reconfigurable Magnetic Liquid Building Blocks for Constructing Artificial Spinal Column Tissues

All-liquid molding can be used to transform a liquid into free-form solid constructs, while maintaining internal fluidity. Traditional biological scaffolds, such as cured pre-gels, are normally processed in solid state, sacrificing flowability and permeability. However, it is essential to maintain the fluidity of the scaffold to truly mimic the complexity and heterogeneity of natural human tissues. Here, this work molds an aqueous biomaterial ink into liquid building blocks with rigid shapes while preserving internal fluidity. The molded ink blocks for bone-like vertebrae and cartilaginous-intervertebral-disc shapes, are magnetically manipulated to assemble into hierarchical structures as a scaffold for subsequent spinal column tissue growth. It is also possible to join separate ink blocks by interfacial coalescence, different from bridging solid blocks by interfacial fixation. Generally, aqueous biomaterial inks are molded into shapes with high fidelity by the interfacial jamming of alginate surfactants. The molded liquid blocks can be reconfigured using induced magnetic dipoles, that dictated the magnetic assembly behavior of liquid blocks. The implanted spinal column tissue exhibits a biocompatibility based on in vitro seeding and in vivo cultivating results, showing potential physiological function such as bending of the spinal column.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Hydrogen Bonding Stiffens Peptide Amphiphile Supramolecular Filaments by Aza-Glycine Residues

Peptide amphiphiles (PAs) are a class of molecules comprised of short amino acid sequences conjugated to hydrophobic moieties that may exhibit self-assembly in water into supramolecular structures. Here, we investigate here how mechanical properties of hydrogels formed by PA supramolecular nanofibers are affected by hydrogen bond densities within their internal structure by substituting glycine for aza-glycine (azaG) residues. We found that increasing the number of PA molecules that contain azaG up to 5 mol% in PA supramolecular nanofibers increases their persistence length fivefold and decreases their diffusion coefficients as measured by fluorescence recovery after photobleaching. When these PAs are used to create hydrogels, their bulk storage modulus (G') was found to increase as azaG PA content in the supramolecular assemblies increases up to a value of 10 mol% and beyond this value a decrease was observed, likely due to diminished levels of nanofiber entanglement in the hydrogels as a direct result of increased supramolecular rigidity. Interestingly, we found that the bioactivity of the scaffolds toward dopaminergic neurons derived from induced pluripotent stem cells can be enhanced directly by persistence length independently of storage modulus. We hypothesize that this is due to interactions between the cells and the extracellular environment across different size scales: from filopodia adhering to individual nanofiber bundles to cell adhesion sites that interact with the hydrogel as a bulk substrate. Fine tuning of hydrogen bond density in self-assembling peptide biomaterials such as PAs provides an approach to control nanoscale stiffness as part of an overall strategy to optimize bioactivity in these supramolecular systems. supramolecular biomaterials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

An elastin-like polymer targeting vascular endothelial growth factor receptor-1 reduces survival in serum-starved endothelial cells

Peptides often exhibit biological activity that depends on the context in which they are displayed and delivered. Understanding and controlling these contextual effects on peptide function is critical for designing targeted and responsive peptide-based biomaterials and therapeutics. Genetically engineered protein polymers such as elastin-like polypeptides (ELPs) can incorporate bioactive peptide motifs and are attractive candidates for biomaterials used in tissue engineering and targeted drug delivery. They also present an opportunity for investigating and modulating cell signaling pathways by presenting a peptide ligand in various defined chemical and physical environments. Vascular endothelial growth factor receptor-1 (VEGFR1) signaling plays important and complex roles in cell survival and angiogenesis, but polymeric materials that interact with this signaling axis are scarce. In this study, a novel genetically engineered elastin-like polymer that targets VEGFR1 is characterized. This polymer, termed R1B-ELP, binds to human endothelial cells in a manner dependent on its VEGFR1-targeting motif and, based on cell proliferation and cytotoxicity assays, demonstrates activity consistent with disrupting pro-survival signaling necessary for endothelial cell function under conditions of environmental stress. Notably, these findings indicate that ELP fusion alters the functional behavior of the targeting peptide. Modulators of VEGFR1 signaling have potential applications in basic studies of angiogenesis as well as in therapeutic applications targeting vascular or inflammatory diseases.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Coarse-grained molecular dynamics simulation of solvent-dependent cellulose nanofiber interactions

Associations between cellulose are important both in biofuel production and in the use of cellulose for biomaterials. Cellulose nanofibers (CNFs) are sustainable, strong, light-weight alternatives to traditional materials in manufacturing, but are challenging to obtain due to irreversible aggregation in solution during preparative fibrillation. Therefore, it is imperative to understand the underlying factors driving aggregation with a view to designing solvents that can effectively compete with interfiber interactions, hence reducing aggregation. Molecular dynamics (MD) simulation at atomic detail can provide useful information on local interactions. However, the length and timescales accessible are too short to fully capture association processes. Here, we provide a method for accessing the longer length and timescales required using coarse-grained (CG) MD simulations with a MARTINI force field to calculate the interaction behavior of CNFs in three selected solvents: NaOH-urea-water, acetone, and neat water. The CG results are consistent with our prior all-atom MD and with previous experimental results. While acetone is found not to be an effective solvent, urea and ionic moieties in NaOH-urea-water not only solvate the fibrils but also improve the confinement of water molecules around them as shown by the solvent residence times and mean-square displacements. Overall, the presence of urea and ions reduces the likelihood of aggregation in multi-CNF systems relative to neat water irrespective of whether the hydrophobic or hydrophilic CNF surfaces are interacting. In conclusion, the CG method shows clear promise for selecting potential high-performance solvents for experimental prioritization in bioenergy and biomaterials research in a relatively fast manner as well as for understanding the aggregation and rheological behavior of CNF-solvent systems.

aggregation↗
DOE OSTI2025

Molecular simulation and artificial intelligence for the circular economy of bioenergy and bioproducts

The concept of the circular bioeconomy is a carbon neutral, sustainable system with zero waste. One vision for such an economy is based upon lignocellulosic biomass. This lignocellulosic circular bioeconomy requires CO 2 absorption from biomass growth and the efficient deconstruction of recalcitrant biomass into solubilized and fractionated biopolymers, which are then used as precursors for the sustainable production of high-quality liquid fuels, chemical bioproducts, and bio-based materials. Here, in this study, we summarize the roles that molecular dynamics (MD) simulations and machine learning (ML) are playing in overcoming several fundamental challenges hindering the adoption of a circular bioeconomy. Specifically, we discuss the role of MD and ML/AI in overcoming lignocellulose recalcitrance by designing biomass pretreatment methods to efficiently produce solubilized cellulose/lignin/hemicellulose and of that in improving energy-intensive manufacturing of biomass-based materials and their structural and mechanical properties. Quantum mechanical methods and MD simulations, in addition to offering a mechanistic understanding of biomass deconstruction and biomaterials design, can provide meaningful structural, energetics, and physiochemical properties as inputs to train AI/ML models. The ML models can guide the experimental prioritization of materials/solvents and process parameters that significantly accelerate the development of biofuel and biomaterial components of the circular bioeconomy.

Smith, Jeremy C. [Oak Ridge National Laboratory (O↗
DOE OSTI2025

Genetically pliable green algae for bioproduction of modified fatty acids, nutritional therapeutic oils, and biopharmaceuticals

Homologous recombination (HR) is an essential tool for complex metabolic engineering in yeast, but transgene integration into plant and green algal nuclear genomes predominantly occurs by non-homologous end-joining. Species of the closely related, oleaginous trebouxiophytes Auxenochlorella and Prototheca, are unusual among the green algae in that HR is the favored mechanism for DNA integration into the nuclear genome. This property enables locus-specific targeting of gene cassettes encoding multiple enzymes for manipulating existing biochemical pathways or introducing new functions. Genetic malleability, and regulatory approval for human consumption, coupled with robust fermentation performance at industrial scale, establishes Auxenochlorella and Prototheca as prime candidates for algal production of biochemicals and biomaterials. The examples presented here highlight strain improvement and engineering for synthesis of hydroxylated fatty acids for biomaterials, structured triglycerides resembling human milk fat for infant nutrition, very-long-chain mono- and polyunsaturated fatty acids with nutraceutical or therapeutic potential, and cannabinoids for pharmacological applications.

Moseley, Jeffrey L. [University of California, Ber↗
DOE OSTI2021

Bioinspired energy absorbing material designs using additive manufacturing

Nature provides many biological materials and structures with exceptional energy absorption capabilities. Few, relatively simple molecular building blocks (e.g., calcium carbonate), which have unremarkable intrinsic mechanical properties individually, are used to produce biopolymer-bioceramic composites with unique hierarchical architectures, thus producing biomaterial-architectures with extraordinary mechanical properties. Several biomaterials have inspired the design and manufacture of novel material architectures to address various engineering problems requiring high energy absorption capabilities. For example, the microarchitecture of seashell nacre has inspired multi-material 3D printed architectures that outperform the energy absorption capabilities of monolithic materials. Using the hierarchical architectural features of biological materials, iterative design approaches using simulation and experimentation are advancing the field of bioinspired material design. However, bioinspired architectures are still challenging to manufacture because of the size scale and architectural hierarchical complexity. Notwithstanding, additive manufacturing technologies are advancing rapidly, continually providing researchers improved abilities to fabricate sophisticated bioinspired, hierarchical designs using multiple materials. This review describes the use of additive manufacturing for producing innovative synthetic materials specifically for energy absorption applications inspired by nacre, conch shell, shrimp shell, horns, hooves, and beetle wings. Potential applications include athletic prosthetics, protective head gear, and automobile crush zones.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Injectable platelet rich fibrin facilitates hair follicle regeneration by promoting human dermal papilla cell proliferation, migration, and trichogenic inductivity

Hair follicle regeneration has been successful in mice but failed in human being for years. Dermal papilla cells, a specialized mesenchymal stem cell derived from dermal papilla within hair follicles, is considered the key cells for hair follicle regeneration function as both regeneration initiator and regulator. Injectable platelet rich fibrin (i-PRF), a novel biomaterial rich in a variety of growth factors and three-dimensional scaffolds, has shown promising effects on tissue regeneration. In this study, we aimed to evaluate the application of i-PRF in human hair follicle regeneration by examining the biological effects of i-PRF on human dermal papilla cells (hDPCs). Biomaterial compatibility, cell viability, proliferation, migration, alkaline phosphatase activity and trichogenic inductivity were assessed after exposing hDPCs to different concentrations of i-PRF extracts. In addition, we investigated the ultrastructure of i-PRF with all cell components filtered. The results revealed that i-PRF possessing excellent biocompatibility and could significantly promote hDPCs proliferation, migration, and trichogenic inductivity. Furthermore, the concentration of i-PRF is able to remarkably influence hDPCs behavior in a dose-dependent pattern. Different concentrations exhibited differential effects on hDPCs behavior. In general, lower concentration promotes cell proliferation better than higher concentration, while higher concentration promotes cell function better reversely. Best concentration for hDPCs in vitro expending is 1% concentration. 20% concentration is optimal for hair follicle regeneration. In summary, our findings concluded that i-PRF facilitates hair follicle regeneration by promoting human dermal papilla cell proliferation, migration, and trichogenic inductivity.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Rapid High-Resolution Analysis of Polysaccharide-Lignin Interactions in Secondary Plant Cell Walls Using Proton-Detected Solid-State NMR

The plant secondary cell wall, a complex matrix composed of cellulose, hemicellulose, and lignin, is crucial for the mechanical strength and water-proofing properties of plant tissues, and serves as a primary source of biomass for biorenewable energy and biomaterials. Structural analysis of these polymers and their interactions within the secondary cell wall has been heavily relying on 13 C-based solid-state NMR techniques. In this study, we explore the application of 1 H-detected solid-state NMR techniques for rapid, high-resolution structural characterization of polysaccharides and lignin, demonstrated on the stems of hardwood eucalyptus. We explored the use of synthesized 2D spectra to resolve central 1 H resonances and the combined application of 3D hCCH and hCHH experiments for complete resonance assignment and unambiguous identification of lignin-carbohydrate interactions. Our findings emphasize the central role of acetylated three-fold xylan conformers, rather than two-fold, in stabilizing the carbohydrate-lignin interface, with glucuronic acid sidechains in eucalyptus glucuronoxylan colocalizing with lignin, revised cellulose-lignin interactions involving uncoated microfibril surfaces, and pectin-lignin interactions indicative of early-stage lignification. These results present a novel approach for rapid structural analysis of lignocellulosic biomaterials without the need for solubilization or extraction.

09 BIOMASS FUELS↗
DOE OSTI2022

Protein Vesicles with pH-Responsive Disassembly

We report protein biomaterials offer several advantages over those made from other components because their amino acid sequence can be precisely controlled with genetic engineering to produce a diverse set of material building blocks. In this work, three different elastin-like polypeptide (ELP) sequences were designed to synthesize pH-responsive protein vesicles. ELPs undergo a thermally induced hydrophobic transition that enables self-assembly of different kinds of protein biomaterials. The transition can be tuned by the composition of the guest residue, X, within the ELP pentapeptide repeat unit, VPGXG. When the guest residue is substituted with an ionizable amino acid, such as histidine, the ELP undergoes a pH-dependent hydrophobic phase transition. We used pH-responsive ELPs with different levels of histidine substitution, in combination with leucine zippers and globular, functional proteins, to fabricate protein vesicles. We demonstrate pH-dependent self-assembly, diameter, and disassembly of the vesicles using a combination of turbidimetry, dynamic light scattering, microscopy, and small angle X-ray scattering. As the ELP transition is dependent on the sequence, the vesicle properties also depend on the histidine content in the ELP building blocks. These results demonstrate the tunability of protein vesicles endowed with pH responsiveness, which expands their potential in drug-delivery applications.

59 BASIC BIOLOGICAL SCIENCES↗