Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “biomass upgrading”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Evaluation of Experimental and Predicted Vapor-Liquid Equilibrium Data for Systems Relevant to Biomass Fast Pyrolysis and Catalytic Upgrading

The experimental vapor-liquid equilibrium (VLE) data for the binaries relevant to the catalytic fast pyrolysis of biomass have been collected and analyzed using the NIST-COSMO-SAC and NIST-modified UNIFAC models. The existing inconsistencies in the experimental data and the predicted values are discussed. For VLE with furan derivatives, PTxy data are normally reported, and the predicted values are in good agreement with them. For phenolic compounds, the gas phase compositions are available for only 36 % of the points, most results originate from a few laboratories, and each system has been typically studied in a single laboratory. The binaries are identified where more experimental VLE data are required to evaluate quality of the existing experimental and predicted results.

09 BIOMASS FUELS↗
DOE OSTI2024

Combining CO2 Electrolysis with Biological Upgrading to Fuels and Chemicals: Turning Waste into Fuels

The utilization of flue gas-derived CO2 presents an opportunity to enhance carbon utilization in the bioethanol industry, contributing to the production of valuable products. In the context of a 90 million-gallon-per-year corn ethanol plant generating approximately 30 tons per hour of 99% pure CO2, a collaborative effort involving six national laboratories has been established. This initiative, known as the CO2 Reduction and Upgrading for e-Fuels (CO2RUe) Consortium, is funded by the Department of Energy's BioEnergy Technologies Office (BETO). The primary objective of the CO2RUe Consortium is to explore innovative approaches to harness CO2 as a valuable feedstock. This interdisciplinary consortium integrates electrochemistry with biological upgrading techniques, aiming to yield sustainable, value-added products and aviation fuels. The presentation will delve into the recent advancements in the realms of electrochemistry and biological upgrading, with a specific focus on formic acid and CO. Additionally, the talk will include an analysis of future electricity grid scenarios, technoeconomic evaluations, and life-cycle assessments. These assessments aim to provide a comprehensive understanding of the impacts of various conversion pathways on both cost and carbon intensity. The CO2RUe Consortium is at the forefront of steering the development of economically favorable and sustainable processes for CO2 utilization. The presentation will showcase the consortium's progress in driving the advancement of technology and processes, emphasizing the economic viability and sustainability of CO2 utilization within the broader context of the bioethanol industry.

biological upgrading↗
DOE OSTI2022

Mild, Electroreductive Lignin Cleavage: Optimizing the Depolymerization of Authentic Lignins

Among candidate strategies to depolymerize lignin, electroreduction has promise as a mild, environmentally friendly, low-cost method to cleave lignin’s most common linkage, the β-O-4 bond. Much of the prior work on lignin electrolysis has focused on anodic (oxidative) approaches, while most available electroreduction studies have studied lignin model compounds rather than authentic lignin. Here, after optimizing with a model system, we investigated the room-temperature electroreductive cleavage of four common lignin samples from different pretreatment approaches, including Kraft, Soda, GVL, and Cu-AHP lignin. This mild electrolysis process resulted in the solubilization of 45% of the GVL lignin and 60% of the Cu-AHP lignin, affording approximately 17.6 and 19.4 wt % of monomeric materials, respectively. Furthermore, the present work is an encouraging first step toward an electroreductive strategy for lignin depolymerization and upgrading.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Integrating catalytic fractionation and microbial funneling to produce 2-pyrone-4,6-dicarboxylic acid and ethanol

Replacing biorefinery designs that use stepwise fractionation, depolymerization, and conversion processes with designed tandem process steps can greatly reduce a biorefinery's operating costs and environmental impact. Reductive Catalytic Fractionation (RCF) is a highly efficient lignin-first approach that combines biomass fractionation and lignin depolymerization to generate a hydrogenolysis oil and pulp. The oil is composed of a complex mixture of phenolic monomers, dimers, and oligomers. Intergrating this chemical deconstruction process with microbial funneling of phenolics can simplify the product mixture and make high-value products. We applied RCF to poplar biomass in a biomass-to-bioproduct processing chain in which the phenolics were funneled to 2-pyrone-4,6-dicarboxylic acid (PDC) by an engineered strain of Novosphingobium aromaticivorans DSM12444. The pulp was enzymatically digested and the glucose and xylose was funneled to ethanol by an engineered strain of Saccharomyces cerevisiae GLBRCY945. By combining biomass fractionation and lignin depolymerization we removed a costly processing step that directly translated into a 29% reduction in the minimum selling price of PDC. This work combines experimentation with process modeling of an integrated biorefinery design to show how utilizing tandem process steps can significantly reduce operating expenses and environmental impact of upgrading lignocellulosic biomass to a portfolio of high value products.

Sener, Canan [Great Lakes Bioenergy Research Cente↗
DOE OSTI2020

Catalytic consequences of hydrogen addition events and solvent-adsorbate interactions during guaiacol-H 2 reactions at the H 2 O-Ru(0 0 0 1) interface

Catalytic reactions of biomass-derived phenolics and H 2 occur on transition metal surfaces via competitive C–O cleavage and ring saturation pathways, with both requiring multiple hydrogen addition events before forming their respective rate limiting transition states. These events are markedly affected by solvent chemical identity, with polar protic solvents ionizing hydrogen adatoms (H*) to interfacial protons (H + ) and opening up new catalytic routes. Here, we establish the reaction coordinate space for guaiacol-H 2 reactions on Ru(0 0 0 1) using density functional theory and describe the atomic-scale effect of a polar protic solvent, H 2 O. Coupled H + and H* attack leads to quasi-equilibrated enol and keto intermediates as the precursors for C–O cleavage and ring saturation, respectively. For C–O cleavage, H 2 O solvent enables a lower energy pathway via concomitant transfer of the hydroxyl H + to the methoxy oxygen during C–OCH 3 cleavage, forming a charge separated [Ru(s)–(C 6 H 5 O – )…(H + )…OCH 3 ] transition state and reducing the barrier by up to 0.8 eV as compared to unassisted C–OCH 3 cleavage. For ring saturation, H* attack onto an unsaturated meta carbon is rate limiting with no direct solvent participation, suggesting that protic polar solvents selectively promote the C–O cleavage pathway. Taken together, we show that activating guaiacol for either C–O bond cleavage or ring saturation product formation depends on the reactive hydrogen identity (H* or H + ), enol/keto isomerization equilibrium, and accessibility of the proton assisted Car–OCH 3 cleavage transition state. Here, all such factors are tunable via changes to the solvent or metal identity.

09 BIOMASS FUELS↗
DOE OSTI2026

Confinement-Controlled Rearrangements in Dioxolane Upgrading on H-ZSM-5 Revealed by Periodic DFT

Zeolitic Brønsted acid sites catalyze carbocation rearrangements central to upgrading biomass-derived oxygenates. Here we elucidate the mechanism of dioxolane conversion to methyl ethyl ketone and isobutanal on H-ZSM-5 using periodic density functional theory on the MFI model, complemented by ab initio molecular dynamics to probe confinement effects. Dioxolane adsorption at the Brønsted site is followed by protonation-assisted ring opening to form an oxocarbenium intermediate stabilized by the deprotonated framework. From this common intermediate, selectivity is governed by two competing rearrangements, namely, the 1,2-hydride shift with a free-energy barrier of 18.05 kcal mol –1 at 498 K leading toward MEK, and the 1,2-methyl shift with a higher barrier of 25.40 kcal mol –1 leading toward isobutanal. The hydride-shift channel is kinetically preferred over the methyl-shift channel, lowering the isobutanal/MEK ratio below the 3:1 limit expected for equal branching. Adsorption thermodynamics further indicate stronger stabilization of MEK than isobutanal within ZSM-5 channels, suggesting that confinement-controlled binding can bias product distributions in addition to intrinsic rearrangement barriers. These results highlight how Brønsted acidity and pore confinement jointly shape the rearrangement landscape in MFI zeolites.

adsorption↗
DOE OSTI2026

Unraveling Defect-Dependent Conductivity-Type Switching in CuFe 2 O 4 for Enhanced Photoelectrocatalytic Reduction of Benzaldehyde

Photoelectrocatalytic (PEC) reduction provides a sustainable route for upgrading biomass-derived feedstocks with reduced energy requirements, yet remains largely unexplored beyond hydrogen evolution and CO 2 reduction due to the scarcity of stable photocathodes. Here, we report a defect-engineered CuFe 2 O 4 photocathode that enables directly quantified PEC reduction of benzaldehyde to benzyl alcohol using a singlecomponent, earth-abundant oxide. By controlling annealing temperature and oxygen partial pressure, CuFe 2 O 4 is systematically tuned from n-type to p-type conductivity. Electrochemical measurements, X-ray and ultraviolet photoelectron spectroscopy, and firstprinciples defect calculations collectively show that oxygen-rich annealing conditions suppress deep donor-type oxygen vacancies while stabilizing shallow acceptor-type copper vacancies, resulting in enhanced hole concentration and improved charge transport. In a mixed acetonitrile/water electrolyte employing 1,4-benzoquinone as a redox mediator, the optimized CuFe 2 O 4 photocathode achieves stable photoelectrochemical operation over 18 h under continuous illumination with a benzyl alcohol production rate of 2.57 μmol/h at −0.50 V vs Ag/AgNO 3 , corresponding to a Faradaic efficiency of 51.3%. This PEC approach lowers the required applied potential by ∼1 V compared to traditional electrocatalytic methods, offering a more energy-efficient route for carbonyl reduction. These findings establish CuFe 2 O 4 as a viable photocathode platform for sustainable photoelectrocatalytic organic transformations under mild reaction conditions.

benzaldehyde reduction↗
DOE OSTI2025

Dehydration of Methyl Lactate on Alkali Cation-Exchanged Faujasite: Effects of Metal Cation Identity and Water Pressure

Turnover rates for the catalytic dehydration of methyl lactate (ML) over ion-exchanged faujasite (FAU) catalysts depend on the identity of alkali metal cations (Na + , K + , Cs + ) and local solvation effects. Analysis of rate measurements and in situ infrared spectroscopy gives evidence that the reaction involves kinetically relevant dissociation of adsorbed methyl lactate upon alkali metal cations. This process involves concerted methyl transfer to the surface and dissociation of the alkali metal from the framework, which occurs at cationic active sites that remain predominantly unoccupied under relevant conditions (0.5–10 kPa ML, 0.5–15 kPa H 2 O, 563–583 K). Despite the mechanistic similarities, apparent activation enthalpies (ΔH app ‡ ) decrease linearly (47 kJ mol –1 from Na + to Cs + ) with ionization energy and cationic radius, and apparent activation entropies (ΔS app ‡ ) decrease 74 J mol –1 K –1 . These trends reflect electrostatic interactions that stabilize the cations to the anionic sites on the zeolite: stronger association between these charges leads to increasingly endothermic processes to displace the alkali metal to form a cationic methoxy and an intrapore metal lactate intermediate. Water physisorption measurements suggest alkali metal ions bind superstoichiometric quantities of water within FAU pores, and in situ infrared spectra suggest the concerted adsorption of ML requires reorganization of this water. Consequently, these processes introduce entropic gains that partially offset entropy losses associated with ML adsorption. Hence, turnover rates differ only by a factor of 2 among Na-, K-, and Cs-FAU at 573 K (ΔΔG app ‡ = 5 kJ mol –1 ). These findings demonstrate the interplay of alkali metal ions with zeolite active sites and intrapore water clusters for ML dehydration, indicating that these interactions can be leveraged to deliver optimal performance under different reaction conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Confinement of Lewis Acid–Base Sites by Microporous Silica Layers on Titania for Enhanced Alkanol Dehydration Reactivity

Alkanol dehydration offers a pathway to upgrade biomass-derived short-chain oxygenates into alkenes, essential chemical building blocks widely used in industrial applications. Transition metal oxides with Lewis acid-base site pairs are attractive catalysts due to their high reactivity and cost-effectiveness. This work demonstrates a synthetic pathway to manipulate local environments around active Lewis acid-base pairs in anatase TiO 2 to enhance their reactivity in alkanol dehydration. Microporous SiO 2 layers with an average pore diameter of ~0.6 nm and a controlled thickness of 0.8-33 nm are deposited on anatase TiO 2 powders by using a molecular templated SiO 2 deposition method. The Lewis acid-base strength of accessible Ti-O pairs remains unchanged, as shown by temperature-programmed surface reactions of surface-bound formic acid-derived species and temperature-programmed desorption of pyridine. However, measured alkanol dehydration rates on confined Ti-O pairs are much higher (by up to 7-fold) than those on TiO 2 . The extent of rate enhancements depends on the reactant size and functional group positioning, suggesting that the rate enhancements reflect the interactions between the guest molecules (reactants and transition states) and the surrounding SiO 2 micropore environments. By providing a detailed synthetic procedure to tailor the local environments around active sites in bulk oxides, this approach offers an additional avenue for enhancing catalytic performance.

09 BIOMASS FUELS↗
DOE OSTI2022

Kinetics and Reaction Mechanisms of Acetic Acid Hydrodeoxygenation over Pt and Pt–Mo Catalysts

In this work, kinetic measurements for silica-supported Pt and Pt-Mo catalysts were collected in vapor-phase acetic acid hydrodeoxygenation by varying the hydrogen partial pressure between 18 and 72 kPa and acetic acid partial pressure between 7 and 18 kPa at 423-473 K. At all testing conditions, the Pt-Mo catalyst was more active and selective. In addition, the apparent activation energy for Pt-Mo of 76±3 kJ/mol was lower than that of 84±4 kJ/mol for Pt. The apparent reaction orders were also different. The order in hydrogen of 0.8±0.1 for Pt-Mo changed to zero at higher hydrogen partial pressures while that for Pt remained constant at 0.6±0.1. A near-zero order in acetic acid for Pt-Mo changed to -2.1 at higher acetic acid pressures while that for Pt remained constant at -2.9±0.3. These differences in reaction kinetics as well as in selectivity trends with changes in temperature and feed composition indicated a change in the reaction mechanism for Pt-Mo. The catalysts were characterized with hydrogen temperature programmed desorption, oxygen temperature programmed oxidation and transmission electron microscopy with energy-dispersed X-ray spectroscopy elemental mapping. Mo was present in the form of subnanometer-size clusters on the surface of Pt nanoparticles. Both Pt and Pt-Mo catalysts were stable under the reaction conditions for 10 h, and the size and structure of Pt and Pt-Mo particles remained mostly unchanged, without coke accumulation. Density functional theory calculations show that surface acetate is not a major reaction intermediate on both Pt and Pt-Mo and, instead, C-OH bond splitting with the formation of acetyl is the first reaction step in hydrodeoxygenation. The activation energy for this step is dramatically lower on Pt-Mo. Furthermore, the activity of acetyl on Pt-Mo is different. Unlike on pure Pt, the reaction of C-O bond splitting becomes exothermic with a lower activation energy on Pt-Mo, and the reaction of C-C bond splitting, in contrast, becomes endothermic with a higher activation energy, explaining the experimentally observed higher activities and selectivities of Pt-Mo. In addition, the calculations demonstrate that a pair of Pt-Mo surface atoms acts as a single active site where Mo serves as a preferential binding anchor for O atoms. The presence of Mo atoms changes the structure and energy of adsorbed and reacting surface species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Fast predictions of liquid-phase acid-catalyzed reaction rates using molecular dynamics simulations and convolutional neural networks

The rates of liquid-phase, acid-catalyzed reactions relevant to the upgrading of biomass into high-value chemicals are highly sensitive to solvent composition and identifying suitable solvent mixtures is theoretically and experimentally challenging. We show that the complex atomistic configurations of reactant–solvent environments generated by classical molecular dynamics simulations can be exploited by 3D convolutional neural networks to enable accurate predictions of Brønsted acid-catalyzed reaction rates for model biomass compounds. We develop a 3D convolutional neural network, which we call SolventNet, and train it to predict acid-catalyzed reaction rates using experimental reaction data and corresponding molecular dynamics simulation data for seven biomass-derived oxygenates in water–cosolvent mixtures. We show that SolventNet can predict reaction rates for additional reactants and solvent systems an order of magnitude faster than prior simulation methods. This combination of machine learning with molecular dynamics enables the rapid, high-throughput screening of solvent systems and identification of improved biomass conversion conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Metabolic engineering of p –hydroxybenzoate in poplar lignin

Ester-linked p-hydroxybenzoate occurs naturally in poplar lignin as pendent groups that can be released by mild alkaline hydrolysis. These ‘clip-off’ phenolics can be separated from biomass and upgraded into diverse high-value bioproducts. We introduced a bacterial chorismate pyruvate lyase gene into transgenic poplar trees with the aim of producing more p-hydroxybenzoate from chorismate, itself a metabolic precursor to lignin. By driving heterologous expression specifically in the plastids of cells undergoing secondary wall formation, this strategy achieved a 50% increase in cell-wall-bound p-hydroxybenzoate in mature wood and nearly 10 times more in developing xylem relative to control trees. Comparable amounts also remained as soluble p-hydroxybenzoate-containing xylem metabolites, pointing to even greater engineering potential. Mass spectrometry imaging showed that the elevated p-hydroxybenzoylation was largely restricted to the cell walls of fibres. Finally, transgenic lines outperformed control trees in assays of saccharification potential. Here, this study highlights the biotech potential of cell-wall-bound phenolate esters and demonstrates the importance of substrate supply in lignin engineering.

4-hydroxybenzoic acid↗
DOE OSTI2021

Advancing Catalytic Fast Pyrolysis Through Integrated Experimentation and Multi-Scale Computational Modeling

This webinar will highlight recent results from a multi-disciplinary research effort in which integrated reaction testing was coupled with particle- and reactor-scale computational modeling to advance catalytic fast pyrolysis (CFP) for the production of renewable hydrocarbon fuels. Data will be presented from a series of ex situ CFP experiments in which a fixed bed of Pt/TiO2 was utilized with co-fed H2 to upgrade woody biomass pyrolysis vapors. Further discussion will include the application of these data towards the development of (1) a multiscale simulation framework to de-couple apparent kinetics from both intraparticle and reactor-scale transport phenomena and (2) a finite element computational model to understand and predict thermal excursions during catalyst regeneration. Throughout the presentation, the speakers will emphasize synergistic outcomes derived from the collaborative approach and highlight ongoing research efforts to accelerate technology maturation.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

Biomethanation to Upgrade Biogas to Pipeline Grade Methane

NREL is working closely with DOE, Electrochaea GmbH, and Southern California Gas Company (SoCalGas) to reduce costs of a biomethanation process capable of megawatt-scale deployment that upgrades organic biogas waste streams to produce pipeline quality renewable natural gas (RNG). Biomethanation is a two-step process using a single-celled methanogenic archaea that converts low-carbon low-cost hydrogen (H2) and waste carbon dioxide (CO2) to produce renewable methane (CH4). The process upgrades the biogenic CO2 - while allowing the CH4 to pass through - from biogas sources like dairies, wastewater treatment plants, and landfills. The CH4 produced is a drop-in direct replacement fuel and producers can participate in the growing number of carbon markets; like California's Low Carbon Fuel Standard and the Federal Renewable Fuel Standard. NREL and Argonne National Laboratory have completed a life cycle analysis using the GREET model to show that the biomethanation process produces RNG that is carbon negative even when H2 production via low-temperature water electrolysis is driven by the existing carbon intensity of California's electricity grid. And of course, even further carbon negative (-233 kg CO2e/kWh) when the electricity is produced from low-carbon sources like wind and solar. Leveraging lessons learned from operating SoCalGas' 700L 18-bar bioreactor system, NREL is designing and building a flexible RD&D platform that will enable field trials at biogas and other CO2 sources. A custom 16' long trailer will house a 20L 18-bar bioreactor, 3 - 25 kW proton exchange membrane electrolyzer, and dosing, thermal, and controls systems to support operations with only power, biogas, and water feedstocks required by the field locations. The end-of-project goal is to demonstrate pipeline quality RNG production (> 95% CH4, < 4% H2, <1% CO2, < 0.2% O2 and < 4 parts per million H2 sulfide) using real biogas feedstocks - thereby recycling both greenhouse gases for injection into the natural gas network or to be used onsite.

biogas upgrading↗
DOE OSTI2023

Simulation and Optimization of Volatile Fatty Acid Upgrading Strategies for Sustainable Transportation Fuel Production

The multicomponent nature of and variability of biomass makes chemical upgrading via a single process stream to a single end use infeasible for most feedstocks. A more promising approach is to identify upgrading strategies (encompassing bioprocessing, catalysis, and separations) which valorize varied biomass fractions to distinct products to which each is best suited. A robust procedure to carry out this goal should incorporate comparison of various upgrading procedures as well as suitability of products to a slate of identified end uses. We applied this strategy to one biomass-derived feedstock, volatile fatty acids (VFAs) derived from wet waste arrested anaerobic digestion, by developing a computer program, VFA Upgrading to Liquid Transportation fUels Refinery Estimation (VULTURE) which evaluates VFA catalytic upgrading to liquid transportation fuels. VULTURE considers multiple separations, catalysis (ketonization, hydrogenation), and fuel application options, generating hundreds of candidate scenarios for a given VFA stream, then selects several promising strategies that optimize bio-content of products with properties best suited for target fuel types. We find that VFAs are upgraded most efficiently when separate light alcohol (C3-6) and heavy hydrocarbon or alcohol (C7-13) fractions are targeted to create gasoline and heavy-duty (diesel or jet) fuels or fuel blends. Surrogate property testing of VULTURE-recommended fuels reveals that most predictive models employed are robust, while rigorous process simulation shows that the simple unit operation assumptions used in VULTURE are largely accurate, especially for heavy-duty fuel synthesis. Techno-economic and life-cycle analyses show that VFA-derived fuels are profitable and have dramatically (=57%) lower carbon intensities than fossil analogs.

BIOMASS FUELS↗
DOE OSTI2024

Opening pathways for the conversion of woody biomass into sustainable aviation fuel via catalytic fast pyrolysis and hydrotreating

Meeting aggressive decarbonization targets set by the International Civil Aviation Organization (ICAO) will require the rapid development of technologies to produce sustainable aviation fuel (SAF). Catalytic fast pyrolysis (CFP) can support these efforts by opening pathways for the conversion of woody biomass into an upgraded biogenic oil that can be further processed to SAF and other fuels. However, the absence of end-to-end experimental data for the process leads to uncertainty in the yield, product quality, costs, and sustainability of the pathway. The research presented here serves to address these needs through a series of integrated experimental campaigns in which real biomass feedstocks are converted to a final SAF product using large bench-scale continuous reactor systems. For these campaigns, the degree of catalytic upgrading during CFP was varied to produce CFP-oils with oxygen contents of 17 and 20 wt% on a dry basis. The CFP-oils were then hydrotreated and distilled into gasoline, diesel, and SAF fractions. Detailed yield and compositional data were obtained for each step of the process to inform technoeconomic and lifecycle analyses, and the fuel properties of the SAF fraction were evaluated to provide first-of-its-kind insight into the quality of the final product. This research reveals opportunities to optimize process carbon efficiency by tuning the degree of catalytic upgrading during the CFP step and highlights routes to produce a high-quality cycloalkane-rich SAF with 85–92% reduction in greenhouse gas emissions compared to fossil-based pathways.

09 BIOMASS FUELS↗
DOE OSTI2022

Revisiting Theoretical Tools and Approaches for the Valorization of Recalcitrant Lignocellulosic Biomass to Value-Added Chemicals

Biorefinery processes for converting lignocellulosic biomass to fuels and chemicals proceed via an integrated series of steps. Biomass is first pretreated and deconstructed using chemical catalysts and/or enzymes to liberate sugar monomers and lignin fragments. Deconstruction is followed by a conversion step in which engineered host organisms assimilate the released sugar monomers and lignin fragments, and produce value-added fuels and chemicals. Over the past couple of decades, a significant amount of work has been done to develop innovative biomass deconstruction and conversion processes that efficiently solubilize biomass, separate lignin from the biomass, maximize yields of bioavailable sugars and lignin fragments and convert the majority of these carbon sources into fuels, commodity chemicals, and materials. Herein, we advocate that advanced in silico approaches provide a theoretical framework for developing efficient processes for lignocellulosic biomass valorization and maximizing yields of sugars and lignin fragments during deconstruction and fuel and chemical titers during conversion. This manuscript surveys the latest developments in lignocellulosic biomass valorization with special attention given to highlighting computational approaches used in process optimization for lignocellulose pretreatment; enzyme engineering for enhanced saccharification and delignification; and prediction of the genome modification necessary for desired pathway fine-tuning to upgrade products from biomass deconstruction into value-added products. Physics-based modeling approaches such as density functional theory calculations and molecular dynamics simulations have been most impactful in studies aimed at exploring the molecular level details of solvent-biomass interactions, reaction mechanisms occurring in biomass-solvent systems, and the catalytic mechanisms and engineering of enzymes involved in biomass degradation. More recently, with ever increasing amounts of data from, for example, advanced mutli-omics experiments, machine learning approaches have begun to make important contributions in synthetic biology and optimization of metabolic pathways for production of biofuels and chemicals.

09 BIOMASS FUELS↗