SEARCH · Engineering Papers
Results for “biogas”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Comparative life-cycle assessments and techno-economic analysis of renewable natural gas production pathways from biogas
Renewable natural gas (RNG) offers a promising pathway for decarbonizing hard-to-abate sectors. This study shows that, relative to conventional upgrading technologies (i.e., membrane separation and pressure swing adsorption), the catalytic methanation reaction (CMR) at water resource recovery facilities doubles RNG output. When consuming lowcarbon hydrogen, the CMR reduces operational energy use and global warming potential. Techno-economic analysis indicates that the CMR is not yet competitive but will become viable if hydrogen reaches $1/kg. Heat integration and hydrogen cost are key drivers of overall performance.
Effect of Amines on MIL-101(Cr) for Simultaneous H 2 S/CO 2 Removal from Biogas
Not provided.
Three-Dimensional Printable Sodium Carbonate Composite Sorbents for Efficient Biogas Upgrading
Not Available
Producing Jet Fuel from Biogas Using Cool GTL SM
GTI Energy advanced the development of Cool GTL SM through a multi-phase project that studied and confirmed the promising value of this technology. It optimized the process by creating an integrated pilot plant capable of producing 50 gallons of total liquid hydrocarbon fuel. It also performed testing campaigns and developed a conceptual commercial design to support technoeconomic and life-cycle analyses, resulting in data that demonstrated a greenhouse gas emissions benefit.
Robust and High Throughput Tools for Characterization of Wet Cellulosic Biogas Feedstocks and Co-Products: Cooperative Research and Development Final Report, CRADA Number CRD-21-21472
This project will develop standardized analytical procedures to support understanding of the chemical composition of wet manure feedstocks, and the digestate formed following anaerobic digestion of organic waste to produce renewable natural gas (RNG). The developed methods will be validated to improve component mass closure, eliminate ambiguities around key constituents, and document the precision and accuracy of the methods. Following validation of the analytical laboratory methods for characterization of wet organic waste feedstocks and digestate, NLR will use the same samples to build and validate near-infrared (NIR) models for high throughput analysis, potentially deployable at commercial facilities, enabling increased production of low carbon intensity RNG from wet organic wastes.
Integration of Biogas Upgrading and Enzyme-boosted CO2 Mineralization for Eco-friendly and Cost-effective Production of Synthetic Aggregates
Explore the source record for details and available documents.
An Advanced Pretreatment/Anaerobic Digestion (APAD) Technology for Increased Conversion of Sewage Sludge to Bio-natural Gas in Small-scale Wastewater Plants of less than Five tons Sewage Sludge a Day
The problem today of energy production from sewage sludge at small-scale is that conventional Anaerobic Digestion (AD) as used today at Wastewater Treatment Facilities (WWTF) produces too little energy for warrant use of the biogas. It further leaves 50% or more of the waste behind after the treatment. To overcome this problem, we proposed a novel concept based on Advanced Wet Oxidation & Steam Explosion (AWOEx) of the recalcitrant parts of sewage sludge left behind after AD. We further suggest upgrading biogas to renewable natural gas (RNG) using gaseous fermentation of biogas with hydrogen added by a new methanogen. Overall, the DOE funded Advanced Pretreatment & Anaerobic digestion (APAD) project showed significant improvements over current practice. The project demonstrated that AWOEx followed by AD significantly enhanced the carbon conversion efficiency from 37% to 62%, an increase of 68%. This is far higher than the metric for the specific FOA of an increase of 50%. Besides, the project showed high efficiency of our biological conversion of biogas into RNG when using a new isolate of Methanothermobacter wolfeii resulting in a 100% increased production of a refined biogas with maximum 5% CO2. With both AWOEx pretreatment and biogas upgrading, the project showed a CCE of ca. 83%, far higher than any previous work on sewage sludge. Besides over 200% higher amount of energy in the form of RNG, the APAD concept will reduce disposal cost due to significant reduction in the concentration of final sludge product after APAD. The APAD technology can operate as a bolt-on to a conventional AD plant for improving conversion of the residual organics after AD as done in this DOE project. It can further be implemented as a stand-alone process with AWOEx followed by AD for WWTF’s currently operating without AD.
Techno-Economic Assessment of CHP Systems in Wastewater Treatment Plants
Wastewater treatment plant (WWTP) utilization of combined heat and power (CHP) systems allows for the efficient use of on-site biogas production, as well as increased annual savings in utility costs. In this paper, a review of biogas energy recovery options, CHP prime mover technologies, and the costs associated with biogas cleaning give a broad summary of the current state of CHP technology in WWTPs. Even though there are six different prime mover technologies, the main ones currently being implemented in WWTPs are micro turbines, fuel cells and reciprocating engines. Different prime movers offer varying efficiencies, installation costs, and biogas impurity (H2S, siloxanes, HCl) tolerances. To evaluate the long-term savings capabilities, a techno-economic assessment of a CHP installation at a case study WWTP shows the payback, annual savings, and initial costs associated with the installation of a CHP system. In this case, a study a payback of 5.7 years and a net present value of USD 709,000 can be achieved when the WWTP generates over 2,000,000 m3 of biogas per year and utilizes over 36,000 GJ of natural gas per year.
Siloxane Deposition on the Ni-YSZ Solid Oxide Fuel Cell Anode Exposed to Bio-Syngas
Siloxane, a common contaminant present in biogas, is known for adverse effects on cogeneration prime movers. In this study, the siloxane deposition products and mechanism in the solid oxide fuel cell nickel-yttria stabilized zirconia (Ni-YSZ) anode are investigated analytically and experimentally. An SOFC with Ni-YSZ anode and pure Ni/YSZ pellets were exposed to a simulated biogas-reformate fuel with octamethylcyclotetrasiloxane (D4) contamination at 750 °C. The electrochemical characterization results show that the SOFCs performance degradation caused by D4 contamination is irreversible. Morphology and XRD results illustrate that silicon and carbon deposition can both be detected in the anode and pellets. Graphite, SiC and SiO2 are all possible products based on the results of XRD test. Here, according to the formation of graphite and SiC, the new mechanism suggests that carbon is also an essential factor in siloxane contamination of Ni-YSZ anodes besides silicon, which can be explained by the catalytic and electrochemical analysis.
Improving anaerobic digestion of sewage sludge to renewable natural gas by the Advanced Pretreatment & Anaerobic Digestion technology (APAD): Pilot testing
Conventional anaerobic digestion (AD) of sewage sludge in wastewater treatment facilities suffers from low carbon conversion efficiency (CCE = 40%) and requires costly CO2 removal for injection of the produced CH4 into the natural gas grid. To address these limitations, we developed the Advanced Pretreatment and Anaerobic Digestion (APAD) process. This integrates Advanced Wet Oxidation & Steam Explosion (AWOEx) pretreatment of residual sludge after conventional AD, followed by biogas upgradation using a novel methanogenic strain, Methanothermobacter wolfeii BSEL, converting CO2 with H2 into CH4 or RNG (renewable natural gas). Pilot-scale results demonstrated that AWOEx pretreatment achieved a CCE of 62% for the residual sludge, 68% higher than the conventional AD process. The CH4 production was further increased by 79%. Subsequent biogas upgrading in a trickling bed reactor with H2 further enhanced total methane output by 100% and resulted in a final CO2 concentration of =3%. The integrated APAD process achieved a remarkable overall CCE of 83%, resulting in a 200% increase in RNG output when compared to conventional AD. Techno-economic analysis revealed that AWOEx pretreatment alone reduced sludge treatment costs from $494 to $253 per ton of dry solids. The complete APAD process incurred a higher cost of treatment of $530 per ton, driven by prices for bottled H2. The process did, however, show gains in energy recovery and decarbonization. Renewable H2, which may reduce in price in the near future, can positively improve the economics of biogas upgrading for the APAD process.
Improving Volatile Fatty Acid Productivity of Anaerobic Digestion
Typical anaerobic digestion (AD) focusses on complete conversion of waste to biogas (primarily carbon dioxide and methane). However, the intermediate metabolites of the AD process, which includes short- and long-chain volatile fatty acids (VFAs), that could serve as the precursors for useful industrial applications are typically ignored. The goal of this project is to eliminate production of biogas while enhancing the production of the intermediate VFAs. Using a mixed microbial consortium (from rumen sources and waste-water sludge), we have determined the optimal carbon loading (chemical oxygen demand, "COD") and optimal pH, that results in high VFA concentrations from food waste. The best VFA yields were obtained using 15 g COD/L and a pH of 9.0 for this substrate. pH 9 produced over 200% higher VFA titers than the controlled conditions (i.e., ph 7.0) after 35 d of digestion, in comparison to pH 5 that showed - 88% higher titers than the control digestion. As expected, the cumulative biogas production was highest in the pH 7.0 condition, in comparison to pH 5.0 or pH 9.0. We further observed that removal of VFAs using solid-liquid separation technique reduce the inhibitory effects of VFAs, thereby leading to overall improvement in conversion efficiency. 16s rRNA analysis is being carried out to explain and identify the biocatalysts that enable VFA production in these AD cultures. Additional efforts to improve VFA yields via increasing the total solid content, temperature optimizations, VFA removal via electrodialysis, and improving hydrolysis via microaeration will be presented.
Minimizing grid energy consumption in wastewater treatment plants: Towards green energy solutions, water sustainability, and cleaner environment
Wastewater treatment plants (WWTPs) consume significant amount of energy to sustain their operation. From this point, the current study aims to enhance the capacity of these facilities to meet their energy needs by integrating renewable energy sources. The study focused on the investigation of two primary solar energy systems in As Samra WWTP in Jordan. The first system combines parabolic trough collectors (PTCs) with thermal energy storage (TES). This system primarily serves to fulfill the thermal energy demands of the plant by reducing the demands from boiler units, which allows more biogas for electricity generation. The second system is a photovoltaic (PV) system with Lithium-Ion batteries, which directly produces electricity that will be used to cover part of the electrical energy demands of plant. To assess the optimal configuration, two distinct scenarios have been formulated and compared to the current case scenario (SC#1). The first scenario focuses on maximizing the net present value (NPV) and minimizing the levelized cost of electricity (LCOE). The second scenario is centred on minimizing the levelized cost of heat (LCOH). The findings indicate that both scenarios succeeded in reducing the reliance on the grid to a value that reach 1 %. Moreover, they both reduced biogas percentage in energy production from 88 % to approximately 65 % through the integration of the PV system. In terms of thermal demand, SC#2 reduced the reliance on biogas boiler units from 100 % to 25 %, while SC#3 achieved an even more impressive reduction to just 8 %. The best LCOE value was attained in SC#2, at 0.0895 USD/kWh, with an NPV of 10.54 million USD. Conversely, SC# 3 yielded an LCOH value of 0.0432 USD/kWh th compared to 0.0534 USD/kWh th USD for SC#2. In conclusion, despite their relatively high capital and operating costs, SC#2 and SC#3 managed to substantially decrease the annual electricity expenditure from approximately 2 million USD to 86,000 USD and 0 USD, respectively.
Energy utilization strategies in lignocellulosic biorefineries
Lignocellulosic biorefineries can generate various energy-rich side streams, including biogas from anaerobic digestion, a lignin stream from biomass pretreatment, and conversion residues. This study evaluates different chemical energy utilization strategies in lignocellulosic biorefineries based on energy and carbon efficiencies, cost, and greenhouse gas mitigation potential. Specifically, using modeling and optimization, we examine strategies that include electricity generation, biogas upgrade to biomethane, lignin valorization, and carbon capture and storage. We find that upgrading biogas to biomethane demonstrates the highest energy efficiency and leads to the lowest minimum fuel selling price for the main product, ethanol. The biorefinery with carbon capture and storage achieves the lowest net carbon footprint. Lignin valorization has the highest carbon footprint due to the additional materials required for lignin depolymerization, despite its potential to produce high value bioproducts.
Enhancing anaerobic digestion of lignocellulosic biomass by mechanical cotreatment
Abstract Background The aim of this study was to increase the accessibility and accelerate the breakdown of lignocellulosic biomass to methane in an anaerobic fermentation system by mechanicalcotreatment: milling during fermentation, as an alternative to conventionalpretreatment prior to biological deconstruction. Effluent from a mesophilic anaerobic digester running with unpretreated senescent switchgrass as the predominant carbon source was collected and subjected to ball milling for 0.5, 2, 5 and 10 min. Following this, a batch fermentation test was conducted with this material in triplicate for an additional 18 days with unmilled effluent as the ‘status quo’ control. Results The results indicate 0.5 – 10 min of cotreatment increased sugar solubilization by 5– 13% when compared to the unmilled control, with greater solubilization correlated with increased milling duration. Biogas concentrations ranged from 44% to 55.5% methane with the balance carbon dioxide. The total biogas production was statistically higher than the unmilled control for all treatments with 2 or more minutes of milling (α = 0.1). Cotreatment also decreased mean particle size. Energy consumption measurements of a lab-scale mill indicate that longer durations of milling offer diminishing benefits with respect to additional methane production. Conclusions Cotreatment in anaerobic digestion systems, as demonstrated in this study, provides an alternative approach to conventional pretreatments to increase biogas production from lignocellulosic grassy material.
Reinventing wastewater treatment plants: energy neutral treatment and enhanced fertilizer production through a novel resource recovery center
Wastewater treatment plants (WWTPs) are typically energy intensive, mainly due to the secondary treatment processes such as activated sludge (AS) for treatment of organics as well as nutrients like nitrogen. Nitrogen removal presents a big problem for WWTPs. The main form of nitrogen in wastewater is ammonium, and an AS process uses oxygen to convert ammonium into nitrite and nitrate which is then converted to nitrogen through denitrification process. During anaerobic digestion (AD), organic nitrogen gets degraded, resulting in an effluent stream (centrate) with a high nitrogen content, mostly in the form of ammonium. This contributes 15-30% of total nitrogen to the wastewater influent which further increases energy consumption for aeration. The project aims to transform this conventional municipal WWTPs into energy-neutral, resource-recovering facilities by integrating three core technologies: • Cloth Media Filtration (CMF) to replace conventional primary sedimentation (CPS) and increase the diversion of organics from the energy intensive secondary treatment to AD. This results in reduced energy demand for aeration in the secondary process while simultaneously increasing the biogas production in the anaerobic digesters. • Anerobic Digester to increase biogas and ammonia production. • Membrane Evaporation (ME) to recover ammonia from AD centrate and produce marketable fertilizer. The benefits of proposed WWTP process modifications were evaluated using techno economic analysis (TEA) and life cycle assessment (LCA). For CMF portion of the research a statistical analysis was employed to develop data-driven tools that could be used to enhance and optimize its performance in terms of energy savings and effluent quality. The main objective of this project is to reduce the energy demand for secondary treatment at municipal WWTPs by at least 50%, increase anaerobic digester (AD) biogas and ammonia production by 100% and 120%, respectively, and recover 90% of ammonia from the AD. Integrated CMF, AD, and ME was shown to work synergistically toward achieving these decarbonization targets through energy-positive treatment and fertilizer recovery techniques.
Composite Sorbents: Enabling Economical Biomethane Production (CRADA Final Report)
The research performed under this CRADA enhanced the understanding of the performance of LLNL’s composite sorbent technology in the presence of raw biogas with H 2 S contamination, the long-term CO 2 removal performance stability of the composite sorbent in simulated biogas, and highlighted some of the challenges to overcome for further scale-up of material production and system design for deployment. Further development of the technology is of benefit to the public by enabling biogas upgrading from small sources for which existing commercial technologies are not suited, providing additional sources of renewable natural gas and diversifying our energy supply.
Low temperature dry reforming of methane using Ru-Ni-Mg/ceria-zirconia catalysts: Effect of Ru loading and reduction temperature
Dry reforming catalysts, especially those with activity at moderate temperatures, have been intensely investigated to enhance the conversion of biogas. Here, Ru is evaluated as a promoter for Ni-Mg based catalysts. Catalysts based on 1.4 wt%Ni-1.0 wt%Mg-Ce 0.6 Zr 0.4 O 2 with Ru (0.02–0.32 wt%) were prepared using incipient wetness. The reducibility of the catalysts and conversions increased with increasing Ru content. Increases in conversions with increasing Ru loading was attributed to the additional active sites and synergistic effect between Ru and Ni, which weakened Ni-Mg interactions. Samples showed dry reforming activity at low temperatures (450–510 °C). Reaction rates and activation energies of higher loading Ru samples (1.4 wt%Ni-1.0 wt%Mg/Ce 0.6 Zr 0.4 O 2 with 0.16 and 0.32 wt%Ru) decreased when the reduction temperature was raised from 300 to 400 °C. A 20 h TOS study showed stable catalytic activity with minimal coke deposition. Furthermore, the results suggest that Ru is an alternative to Pt in promoting low temperature dry reforming of methane.