Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “binding energy difference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Shake-up and shake-off effects in neutrinoless double- β decay

Here, we revisit the role of shake-up and shake-off effects in neutrinoless double-β decay, following earlier work by Drukarev et al. [Phys. Rev. C 94, 035504 (2016)]. We find in agreement with Drukarev et al. that the Q value of the decay is reduced by any atomic excitation in the final-state but not by the difference in atomic binding energy of the initial and final state atoms, as was recently suggested by Mei et al. [Mod. Phys. Lett. A 37, 2250058 (2022)] and Mei et al. [Nucl. Phys. A. 1032, 122623 (2023)]. We discuss how the absorption of subsequent atomic de-excitation ejecta shifts the neutrinoless double-β decay peak back to its nominal value. We propose an in situ experimental verification of these ideas, and discuss the impact of shake-up and shake-off on two-neutrino double-β decay spectral shapes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Controlling the Self-Assembly of DNA Origami Octahedra via Manipulation of Inter-Vertex Interactions

Recent studies have demonstrated novel strategies for the organization of nanomaterials into three-dimensional (3D) ordered arrays with prescribed lattice symmetries using DNA-based self-assembly strategies. In one approach, the nanomaterial is sequestered into DNA origami frames or “material voxels” and then coordinated into ordered arrays based on the voxel geometry and the corresponding directional interactions based on its valency. While the lattice symmetry is defined by the valency of the bonds, a larger-scale morphological development is affected by assembly processes and differences in energies of anisotropic bonds. To facilely model this assembly process, we investigate the self-assembly behavior of hard particles with six interacting vertices via theory and Monte Carlo simulations and exploration of corresponding experimental systems. We demonstrate that assemblies with different 3D crystalline morphologies, but the same lattice symmetry can be formed depending on the relative strength of vertex-to-vertex interactions in orthogonal directions. We observed three distinct assembly morphologies for such systems: cube-like, sheet-like, and cylinder-like. A simple analytical theory inspired by well-established ideas in the areas of protein crystallization, based on calculating the second virial coefficient of patchy hard spheres, captures the simulation results and thus represents a straightforward means of modeling this self-assembly process. To complement the theory and simulations, experimental studies were performed to investigate the assembly of octahedral DNA origami frames with varying binding energies at their vertices. In conclusion, x-ray scattering confirms the robustness of the formed nanoscale lattices for different binding energies, while both optical and electron microscopy imaging validated the theoretical predictions on the dependence of the distinct morphologies of assembled state on the interaction strengths in the three orthogonal directions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

On the Sensitivity to Density-Functional Approximations for CO Binding Energies of Single-Atom Catalysts in Nitrogen-Doped Graphene

Density functional theory (DFT) methods are the working horse in screening new catalytic materials. They are widely used to predict trends in binding energies, which are then used to compare the activity of different materials. Here, the binding strength of CO is an important descriptor to the CO 2 reduction catalytic activity of the single transition metal atoms embedded on nitrogen-doped graphene (TM/NG). In this work, however, we show that CO binding strengths in different TM/NG has very different sensitivity to DFT methods. Specifically, Fe/NG CO binding energy changes dramatically with the percentage of exact exchange in the functional; Co/NG does less so, while Ni/NG nearly has no change. Such varying behaviors is a direct result of different local spin configurations, similar to the performance of DFT methods for metal porphyrin complexes. Therefore, caution should be exercised when using DFT binding energies for quantitative predictions in TM/NG single atom catalysis.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Measuring Relative Energies of Ligand Binding Conformations on Nanocluster Surfaces with Temperature-Dependent FTIR Spectroscopy

We present a method to measure relative energies between binding conformations of carboxylate ligands on InP magic-sized clusters in solution. Using Markov chain Monte Carlo global fitting analysis on temperature-dependent vibrational spectra of cluster-bound ligands, we observe significantly different relative energies between various bidentate and monodentate binding motifs. Relative to the monodentate motif, the chelating conformation is 0.7 ± 0.3 kcal/mol more stable and the syn–syn bridging conformation is 1.1 ± 0.5 kcal/mol more stable, but the syn–anti bridging conformation exhibits no significant difference. Our results demonstrate that the relative energy between monodentate-bound carboxylates and unbound carboxylic acids is 4.52 ± 0.05 kcal/mol, or 1582 ± 19 cm –1 , nearly identical to the carboxylate asymmetric stretching frequency. Here, we suggest that the ligand vibrational energy may play a key role in ligand dissociation by compensating for energy differences between bound and dissociated ligand states. This approach gives important experimental insights into ligand binding and can inform future nanocrystal surface engineering.

Conformation↗
DOE OSTI2025

QM Investigation of Rare Earth Ion Interactions with First Hydration Shell Waters and Protein-Based Coordination Models

Here, conventional methods for extracting rare earth metals (REMs) from mined mineral ores are inefficient, expensive, and environmentally damaging. Recent discovery of lanmodulin (LanM), a protein that coordinates REMs with high-affinity and selectivity over competing ions, provides inspiration for new REM refinement methods. Here, we used quantum mechanical (QM) methods to investigate trivalent lanthanide cation (Ln 3+ ) interactions with coordination systems representing bulk solvent water and protein binding sites. Energy decomposition analysis (EDA) showed differences in the energetic components of Ln 3+ interaction with representatives of solvent (water, H 2 O) and protein binding sites (acetate, CH 3 COO – ), highlighting the importance of accurate description of electrostatics and polarization in computational modeling of REM interactions with biological and bioinspired molecules. Relative binding free energies were obtained for Ln 3+ with coordination complexes originating from binding sites in PDB structures of a lanthanum binding peptide (PDB entry 7CCO) and LanM, with explicit consideration of the first hydration shell waters, according to quasi-chemical theory (QCT). Beyond the first shell, the bulk solvent environment was represented with an implicit continuum model. Ln 3+ interactions with (H 2 O) 9 and both binding site models became more favorable, moving down the periodic series. This trend was more pronounced with the protein binding site models than with water, resulting in affinity increasing with periodic number, except for the last REM, Lu 3+ , which bound less favorably than the preceding element, Yb 3+ . Using the truncated 7CCO binding site model, the magnitude and trend of the experimental Ln 3+ relative binding free energies for the whole 7CCO peptide were reproduced. Conversely, the previously reported experimental data for LanM show a preference for the earlier lanthanides; this is likely due to longer-range interactions and cooperative effects, which are not represented by the reduced models. Using the truncated 7CCO binding site model, the magnitude and trend of the experimental Ln 3+ relative binding free energies for the whole 7CCO peptide were reproduced. In contrast to the previously reported experimental data for LanM, the peptide preferentially binds the earlier lanthanides. This difference likely arises due to longer-range interactions and cooperative effects not represented by the peptide. Further investigation of Ln 3+ interactions with whole proteins using polarizable molecular mechanics models with explicit solvent is warranted to understand the influence of longer-ranged interactions, cooperativity, and bulk solvent. Nevertheless, the present work provides new insights into Ln 3+ interactions with biomolecules and presents an effective computational platform for designing specific single-site REM binding peptides more efficiently.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Comparison of PsbQ and Psb27 in photosystem II provides insight into their roles

Photosystem II (PSII) catalyzes the oxidation of water at its active site that harbors a high-valent inorganic Mn 4 CaO x cluster called the oxygen-evolving complex (OEC). Extrinsic subunits generally serve to protect the OEC from reductants and stabilize the structure, but diversity in the extrinsic subunits exists between phototrophs. Recent cryo-electron microscopy experiments have provided new molecular structures of PSII with varied extrinsic subunits. We focus on the extrinsic subunit PsbQ, that binds to the mature PSII complex, and on Psb27, an extrinsic subunit involved in PSII biogenesis. PsbQ and Psb27 share a similar binding site and have a four-helix bundle tertiary structure, suggesting they are related. Here, we use sequence alignments, structural analyses, and binding simulations to compare PsbQ and Psb27 from different organisms. We find no evidence that PsbQ and Psb27 are related despite their similar structures and binding sites. Evolutionary divergence within PsbQ homologs from different lineages is high, probably due to their interactions with other extrinsic subunits that themselves exhibit vast diversity between lineages. This may result in functional variation as exemplified by large differences in their calculated binding energies. Psb27 homologs generally exhibit less divergence, which may be due to stronger evolutionary selection for certain residues that maintain its function during PSII biogenesis which is consistent with their more similar calculated binding energies between organisms. Previous experimental inconsistencies, low confidence binding simulations, and recent structural data suggest that Psb27 is likely to exhibit flexibility that may be an important characteristic of its activity. Furthermore, the analysis provides insight into the functions and evolution of PsbQ and Psb27, and an unusual example of proteins with similar tertiary structures and binding sites that probably serve different roles.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

The effect of pore structure in ethane-selective metal-organic frameworks for ethylene purification

Separation of ethylene from ethane is of great importance in petrochemical industry. Adsorptive separation making use of porous materials such as metal-organic frameworks (MOFs) is an energy efficient technology compared to the conventional cryogenic distillation. However, preferential adsorption of ethylene over ethane represents the major current challenge. Here we demonstrate how pore structure can significantly alter the adsorption selectivity in two isoreticular Zr-MOFs. A simple ligand functionalization in UiO-66 yields smaller/better matching pore for ethane, and weaker interaction with ethylene, greatly enhancing ethane/ethylene selectivity in MOF-801. Ab initio calculations combined with in situ infrared spectroscopic analysis unveil the nature of host-guest interactions and differences in the overall binding energies. Polymer-grade ethylene (99.9%) can be produced directly from ethane/ethylene mixture in a single step. Having well-balanced adsorption capacity and selectivity, low-cost synthesis and easy scalability MOF-801 stands out as a promising ethane-selective adsorbent for one-step ethylene purification under ambient conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Discrimination of Hexane Isomers by Temperature Swing Adsorption in a Rigid Aluminum Metal–Organic Framework

The efficient separation of alkane isomers with similar physicochemical properties remains a persistent challenge for the petrochemical industry. Adsorptive separation using metal− organic frameworks (MOFs) offers an energy-efficient alternative to conventional distillation. Herein, we report temperature swing discrimination of hexane isomers with different degrees of branching using MIL-120, a rigid aluminum pyromellitate-based MOF. MIL-120 features uniform one-dimensional channels with an aperture of ∼5.5 Å. At 30 °C, it selectively adsorbs linear and monobranched hexanes while excluding the dibranched isomer. Upon heating to 120 °C, both mono- and dibranched isomers are completely excluded, whereas linear hexane remains strongly adsorbed. Breakthrough experiments validate the temperature swing separation performance. Adsorption heat analysis combined with ab initio calculations provides a quantitative measure of distinct differences in adsorption enthalpies, binding energies, and diffusion barriers responsible for the observed separation efficiency, highlighting the potential of this MOF for efficient separation of alkane isomers via temperature swing adsorption.

Adsorption↗
DOE OSTI2024

Metal Independent Correlations for Site-specific Binding Energies of Relevant Catalytic Intermediates

Establishing energy correlations among different metals can accelerate the discovery of efficient and cost-effective catalysts for complex reactions. Using a recently introduced coordination-based model, we can predict site specific metal binding energies (∆EM) that can be used as a descriptor for chemical reactions. In this study, we have examined a range of metals including Ag, Au, Co, Cu, Ir, Ni, Os, Pd, Pt, Rh, and Ru and found linear correlations between predicted ∆EM and adsorption energies of CH and O (∆ECH and ∆EO) at various coordination environment for all the considered metals. Interestingly, all the metals correlate with one another under specific surface site coordination, indicating that different metals are interrelated in a particular coordination environment. Furthermore, we have tested and verified for PtPd and PtIr-based alloys that they follow a similar behavior. Moreover, we have expanded the metal space by taking some early transition metals along with few s-block metals and shown a cyclic behavior of the adsorbate binding energy (∆EA) versus ∆EM. Therefore, ∆ECH and ∆EO can be efficiently interpolated between metals, alloys and intermetallics based on information related to one metal only. This simplifies the process of screening new metal catalyst formulations and their reaction energies.

Density function theory↗
DOE OSTI2022

Molecular insights into the differential dynamics of SARS-CoV-2 variants of concern

Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) has affected the lives and livelihood of millions of individuals around the world. It has mutated several times after its first inception, with an estimated two mutations occurring every month. Although we have been successful in developing vaccines against the virus, the emergence of variants has enabled it to escape therapy. Few of the generated variants are also reported to be more infectious than the wild-type (WT). In this study, we analyze the attributes of all RBD/ACE2 complexes for the reported VOCs, namely, Alpha, Beta, Gamma, and Delta through computer simulations. Results indicate differences in orientation and binding energies of the VOCs from the WT. Overall, it was observed that electrostatic interactions play a major role in the binding of the complexes. Detailed residue level energetics revealed that the most prominent changes in interaction energies were seen particularly at the mutated residues which were present at RBD/ACE2 interface. We found that the Delta variant is one of the most tightly bound variants of SARS-CoV-2 with dynamics similar to WT. The high binding affinity of RBD towards ACE2 is indicative of an increase in viral transmission and infectivity. The details presented in our study provide additional information for the design and development of effective therapeutic strategies for the emerging variants of the virus in the future.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Real-Space Pseudopotential Method for the Calculation of Third-Row Elements X-ray Photoelectron Spectroscopic Signatures

X-ray photoelectron spectroscopy (XPS) is a powerful characterization technique that unveils subtle chemical environment differences via core– electron binding energy (CEBE) analysis. We extend the development of realspace pseudopotential methods to calculating 1s, 2s, and 2p 3/2 CEBEs of third-row elements (S, P, and Si) within the framework of Kohn–Sham density-functional theory (KS-DFT). The new approach systematically prevents variational collapse and simplifies core-excited orbital selection within dense energy level distributions. However, careful error cancellation analysis is required to achieve accuracy comparable to all-electron methods and experiments. Combined with real-space KS-DFT implementation, this development enables large-scale simulations with both Dirichlet boundary conditions and periodic boundary conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Trends of Neutron Skins and Radii of Mirror Nuclei from First Principles

The neutron skin of atomic nuclei impacts the structure of neutron-rich nuclei, the equation of state of nucleonic matter, and the size of neutron stars. Here we predict the neutron skin of selected light- and medium-mass nuclei using coupled-cluster theory and the auxiliary field diffusion Monte Carlo method with two- and three-nucleon forces from chiral effective field theory. We find a linear correlation between the neutron skin and the isospin asymmetry in agreement with the liquid-drop model and compare with data. We also extract the linear relationship that describes the difference between neutron and proton radii of mirror nuclei and quantify the effect of charge symmetry breaking terms in the nuclear Hamiltonian. In conclusion, our results for the mirror-difference charge radii and binding energies per nucleon agree with existing data.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

The Thomas theorem and the Efimov States within a generalized Bohr model

Using a generalized Bohr model and the hyper-spherical formalism for a three-body system, we derive the universal energy functions. We apply our model to 4He atom where only the Coulomb potential is dominant and find that its binding energy is well reproduced (less than 5.5% difference). Later, we focus on the equal mass three-body systems and derive the Thomas theorem assuming a simple interaction depending on the range of the potential. We discuss the conditions for which an unbound two-body system produces a bound three-body system and apply our model to 4He and triton atoms as well as to the triton nucleus. Using their scattering lengths and effective ranges, we are able to reproduce the two-body or the three-body binding energies (less than 5% difference) with only one parameter fitted. Prediction for excited (Efimov) levels are also given and in particular we demonstrate that for some hyper-angles two equal minima appear which indicate a phase (shape) transition similar to the Landau's theory of phase transition. We suggest that the observed excited levels in two different experiments for the triton nucleus are indeed Efimov levels and there may be more surprises.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Recent advances in coupled cluster computations of open-shell atomic nuclei

In this contribution, we report on recent progress in coupled-cluster simulations of open-shell atomic nuclei using interactions consistently derived from chiral effective field theory. In particular, we compare different coupled-cluster approaches by computing binding energies and electric dipole polarizabilities in medium-mass calcium isotopes.

Marino, Francesco [Johannes Gutenberg Univ., Mainz↗
DOE OSTI2025

Global optimization of harmonic oscillator basis in covariant density functional theory

The present investigation focuses on the improvement of the accuracy of the description of binding energies within moderately sized fermionic basis. Using the solutions corresponding to infinite fermionic basis it was shown that in the case of meson exchange (ME) covariant energy density functionals (CEDFs) the global accuracy of the description of binding energies in the finite $N_F$ = 16 - 20 bases can be drastically (by a factor ranging from ~3 up to ~9 dependent on the functional and $N_F$) improved by a global optimization of oscillator frequency of the basis. This is a consequence of the unique feature of the ME functionals in which with increasing fermionic basis size fermionic and mesonic energies approach the exact (infinite basis) solution from above and below, respectively. As a consequence, an optimal oscillator frequency $\hbar\omega_0$ of the basis can be defined which provides an accurate reproduction of exact total binding energies by the ones calculated in truncated basis. This leads to a very high accuracy of the calculations in moderately sized $N_F=20$ basis when mass dependent oscillator frequency is used: global rms differences $\delta B_{rms}$ between the binding energies calculated in infinite and truncated bases are only 0.025 MeV and 0.031 MeV for the NL5(Z) and DD-MEZ functionals, respectively. Optimized values of the oscillator frequency $\hbar\omega_0$ are provided for three major classes of CEDFs, i.e. for density dependent meson exchange functionals, nonlinear meson exchange ones and point coupling functionals.

Binding energy & masses↗
DOE OSTI2021

Nuclear energy density functionals grounded in ab initio calculations

Here, we discuss the construction of a nuclear energy density functional (EDF) from ab initio computations and advocate the need for a methodical approach that is free from ad hoc assumptions. The equations of state (EoSs) of symmetric nuclear and pure neutron matter are computed using the chiral NNLO sat and the phenomenological AV4' + UIX c Hamiltonians as inputs to self-consistent Green's function (SCGF) and auxiliary field diffusion Monte Carlo (AFDMC) methods. We propose a convenient parametrization of the EoS as a function of the Fermi momentum and fit it on the SCGF and AFDMC calculations. We apply the ab initio based EDF to carry out an analysis of the binding energies and charge radii of different nuclei in the local density approximation. The NNLO sat -based EDF produces encouraging results, whereas the AV4' + UIX c -based one is farther from experiment. Possible explanations of these different behaviors are suggested, and the importance of gradient and spin-orbit terms is analyzed. Our paper paves the way for a practical and systematic way to merge ab initio nuclear theory and density functional theory, while shedding light on some critical aspects of this procedure.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1977

On the emission of neutrinos and gravitational waves in the formation of neutron stars

The various modes in which the energy generated by the formation of a neutron star or black hole due to collapse of a stellar core can appear are investigated, and physical constraints are placed on this energy distribution by noting that neutron stars appear to have been found in at least six X-ray binaries and one binary pulsar. The energy generated by a supernova during the collapse of a stellar core to a neutron star is considered along with the manner in which this energy is distributed in the different modes. It is shown that the gravitational binding energy of a neutron star is converted mostly into kinetic energy of rotation or is emitted as neutrinos, gravitational waves, or both. The energy release through mass ejection and cosmic rays is suggested to be no more than a few percent of the total energy involved. A possible scenario is outlined for the case where the initial rotation velocity of the collapsing core exceeds some critical limit. It is concluded that gravitational radiation will be the ultimate outlet for most of the binding energy in this case.

Kondo, Y.↗
NASA NTRS1989

The binding energies of one and two water molecules to the first transition-row metal positive ions

The bonding of water to the transition metal positive ions is electrostatic in origin. The electrostatic bonding is enhanced by a variety of mechanisms: mixing in 4p character, 4s-3d hybridization, and 4s promotion into the compact 3d orbital. The importance of these effects varies between the different metal ions due to changes in the separation of the metal ion atomic states. Furthermore, the change in the metal-water repulsion when a second water is added also changes the relative importance of the different metal asymptotes. The second water binding energy varies from being 11 kcal/mol smaller than the first for Mn(+) to 3 kcal/mol larger for V(+) and Fe(+).

Rosi, Marzio↗