SEARCH · Engineering Papers

Results for “bcc”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

NASA NTRS1972

Effect of metallurgical structure and properties on adhesion and friction behavior of cobalt alloys

The metallurgical structure and some of the mechanical properties of two cobalt alloys, cobalt-50% iron and cobalt-25% molybdenum-10% chromium, were determined under various heat treated conditions. The mechanical properties of the bcc disordered Co-50Fe alloy, which was found to be very brittle, indicated an exceedingly low fracture strength, low hardness, and very weak grain boundary strength. Ordering by suitable heat treatment only produced a more brittle material with a lower fracture strength and a slightly higher hardness value. Work hardening was found to produce a finer grain structure and a greater grain boundary strength. Tensile properties were examined. It was found that the Co-25Mo-10Cr alloy was difficult to place in the alpha Co solid solution condition, which limited the ability to use precipitation as a hardening reaction. Over two hundred adhesion cycles from zero contact load, to maximum load, to fracture were conducted between couples for each of the above alloys in an ultrahigh vacuum system which would permit the sample surfaces to be cleaned of all contaminant layers. In the Co-50Fe case, the calculated fracture stress from the adhesion tests showed values in the range of 80 to 150 k.s.i., which is about ten times greater than the values from tension tests.

Keller, D. V., Jr.↗

NASA NTRS1971

Surface field analysis of splitting of orbitals of atoms and ions approaching a metal surface.

The splitting of p- and d-orbitals of an atom or an ion which is caused by the locally varying potential near the surface of a realistic metal has been studied for bcc and fcc substrates. A quasi-ionic model is reasonable at close distance, inasmuch as the electron gas does not completely screen the ionic cores. The arrangement of ion cores near the surface causes the potential to vary in three dimensions. Expressions for energy levels were derived for an unsymmetric group using the quasi-ionic model and techniques used in the treatment of crystal field of nearest neighbors. A number of cases involving ions, as well as atoms in the vicinity of a metal substrate were numerically evaluated.

Rao, P. V. S.↗

NASA NTRS1972

Calculation of body-centered-cubic lattice sums with an application to ferromagnetism.

The lattice sums for the bcc lattice are recalculated using the method of Flax and Raich to obtain more general expressions, valid for all temperatures, in terms of a Langevin function and its derivatives. Formulas are presented which enable easy numerical evaluation. A comparison with well-known low-temperature expansions and with the results of direct numerical integration demonstrates the validity at low temperatures of the more general expressions calculated here.

Wintucky, E. G.↗

NASA NTRS1973

Theory of disordered Heisenberg ferromagnets

A Green's function technique is used to calculate the magnetic properties of Heisenberg ferromagnets in which the exchange interactions deviate randomly in strength from the mean interaction. Systems of sc, bcc, and fcc topologies and of general spin values are treated. Disorder produces marked effects in the density of spin wave states, in the form of enhancement of the low-energy density and extension of the energy band to higher values. The spontaneous magnetization and the Curie temperature decrease with increasing disorder. The effects of disorder are shown to be more pronounced in the ferromagnetic than in the paramagnetic phase.

Stubbs, R. M.↗

NASA NTRS1973

Is nuclear matter a quantum crystal?

A possible alternative to the ordinary gas-like computation for nuclear matter is investigated under the assumption that the nucleons are arranged in a lattice. BCC, FCC and HCP structures are investigated. Only HCP shows a minimum in the energy vs. density curve with a modest binding energy of -1.5 MeV. The very low density limit is investigated and sensible results are obtained only if the tensor force decreases with the density. A study of the elastic properties indicates that the previous structures are mechanically unstable against shearing stresses.

Canuto, V.↗

NASA NTRS1972

Alloy hardening and softening in binary molybdenum alloys as related to electron concentration.

Determination of the effects of alloy additions of Hf, Ta, W, Re, Os, Ir, and Pt on the hardness of Mo. Special emphasis was placed on alloy softening in these binary Mo alloys. A modified microhardness test unit permitted hardness determinations at homologous temperatures ranging from 0.02 to 0.15, where alloy softening normally occurs in bcc alloys. Results showed that alloy softening was produced by those elements having an excess of s + d electrons compared to Mo while those elements having an equal number or fewer s + d electrons than Mo failed to produce alloy softening. The magnitude of the softening and the amount of solute element at the hardness minimum diminished rapidly with increasing test temperature. At solute concentrations where alloy softening was observed, the temperature sensitivity of hardness was lowered. For solute elements having an excess of s + d electrons or fewer s + d electrons than Mo, alloy softening and alloy hardening can be correlated with the difference in number of s + d electrons of the solute element and Mo.

Stephens, J. R.↗

NASA NTRS1974

Free energies of formation of WC and WzC and the thermodynamic properties of carbon in solid tungsten

The activity of carbon in the two-phase regions - W + WC and W + W2C was obtained from the carbon content of iron rods equilibrated with mixtures of metal plus carbide powders. From this activity data the standard free energies of formation of WC and W2C were calculated. The temperature of the invariant reaction W2C = W + WC was fixed at 1570 + or - 5K. Using available solubility data for C in solid W, the partial molar free energy of C in the dilute solid solution was also calculated. The heat of solution of C in W, and the excess entropy for the interstitial solid solution, were computed, assuming that the carbon atoms reside in the octahedral interstices of bcc W.

Gupta, D. K.↗

NASA NTRS1973

Shock remagnetization associated with meteorite impact at planetary surfaces

The stages of a cratering event are considered together with four distinct magnetization volumes, taking into account the jetted material, the ejecta, the impact melt, and shock-compressed material which remains in situ. Shock classifications are discussed along with mineralogical aspects of shock remagnetization, the behavior of iron sulfides, defect cubic spinels, ilmenite-hematite series, the Fe-Ti-O system, alloys phases, and silicates. Remagnetization mechanisms considered include a first order reversible crystallographic transition in bcc iron-nickel, a second order Curie point transition in fcc iron-nickel, shock-induced anisotropy, and shock melting of iron containing silicates. Experimental results are reported together with a hypothetical crater model.

Wasilewski, P. J.↗

NASA NTRS1974

Solubility and thermodynamic properties of oxygen in solid molybdenum

A formula is obtained for the solubility of oxygen in solid Mo, determined in the range from 1400 to 1900 C by equilibrating rods of zone-refined Mo with mixtures of Mo and MoO2 powders. Using the known value of the free energy of formation of MoO2, a formula is obtained for the chemical potential of oxygen in the dilute solid solution. The heat of solution of oxygen in solid Mo and the excess entropy for the interstitial solid solution are also determined, assuming that the oxygen atoms reside in the octahedral interstices of bcc Mo.

Srivastava, S. C.↗

NASA NTRS1974

Research in the Aloha system

The Aloha system was studied and developed and extended to advanced forms of computer communications networks. Theoretical and simulation studies of Aloha type radio channels for use in packet switched communications networks were performed. Improved versions of the Aloha communications techniques and their extensions were tested experimentally. A packet radio repeater suitable for use with the Aloha system operational network was developed. General studies of the organization of multiprocessor systems centered on the development of the BCC 500 computer were concluded.

Abramson, N.↗

NASA NTRS1974

The role of nickel content and the magnetic remanence in iron-nickel alloys of lunar composition

Lunar samples are magnetic primarily due to the body centered cubic (BCC) iron and iron-nickel alloys they contain. Presented for the first time are results which demonstrate that the magnitude of the martensitic thermal remanence (MTRM) induced on quenching iron-nickel alloy in the geomagnetic field depends on the nickel content of the alloy. High magnetic stability is due to the increasing dislocation density and increasingly complex microstructures associated with increasing nickel content in the alloys. The results agree with the mechanical and structural properties of the alloys. The characteristic quench martensite microstructure observed on metallographic examination provides a recognition criterion for the MTRM mechanism. These results are important for lunar and meteoritic research intending to ascertain the paleofield responsible for the observed remanent magnetization.-

Wasilewski, P.↗

NASA NTRS1975

Search for solid conductors of Na/+/ and K/+/ ions - Five new conductors

Five new conductors of positive Na and K ions, for use as separators in high energy secondary batteries, have been discovered. They include: (1) the pyrochlores NaTaWO6 and NaTa2O5F; (2) the bcc form of NaSbO3; and (3) the niobates 2Na2O-3Nb2O5 and 2K2O-3Nb2O5, with the alkali ions probably in open layers of the completely determined structure. On the basis of approximately 40 structure types, generalizations have been made regarding the relation between structure and ionic transport.

Singer, J.↗

NASA NTRS1976

New solid conductors of Na/+/ and K/+/ ions

About 40 structure types for solid conductors of Na(+) and K(+) ions are surveyed. Five compounds in three structure types are discovered to be good solid conductors of alkali metal ions, capable of ion transport with conductivities in the vicinity of 0.00001/ohm-cm at 25 C. These compounds are a bcc form of NaSbO3, an orthorhombic layer structure of the composition 2M2O.3Nb2O5 with M equal to Na or K, and the Na pyrochlores NaTa2O5F and NaTaWO6. Ion exchange is required to produce each of these Na compounds. Only the 2K2O.3Nb2O5 can so far be synthesized directly from the oxides and thus is the only one which can be sintered readily. The niobate is about as good a conductor of K(+) ion as is K-beta alumina. The NaSbO3 compares well with Na beta at 280 C. A number of phase diagrams are developed.

Singer, J.↗

NASA NTRS1977

Band structure of W and Mo by empirical pseudopotential method

The empirical pseudopotential method (EPM) is used to calculate the band structure of tungsten and molybdenum. Agreement between the calculated reflectivity, density of states, density of states at the Fermi surface and location of the Fermi surface from this study and experimental measurements and previous calculations is good. Also the charge distribution shows the proper topological distribution of charge for a bcc crystal.

Sridhar, C. G.↗

NASA NTRS1977

Effect of thermal cycling on the microstructure of a directionally solidified Fe, Cr, Al-TaC eutectic alloy

Cylindrical bars (1.2 cm diameter) of Fe-13.6Cr-3.7Al-9TaC (wt %) eutectic alloy were directionally solidified in a modified Bridgman type furnace at 1 cm/h. The alloy microstructure consisted of aligned TaC fibers imbedded in a bcc Fe-Cr-Al matrix. Specimens of the alloy were thermally cycled from 1100 to 425 C in a burner rig. The effects of 1800 thermal cycles on the microstructure was examined by scanning electron microscopy, revealing a zig-zag shape of TaC fibers aligned parallel to the growth direction. The mechanism of carbide solution and reprecipitation on the (111) easy growth planes, suggested previously to account for the development of irregular serrations in Co-Cr-Ni matrix alloys, is believed to be responsible for these zig-zag surfaces.

Harf, F. H.↗

NASA NTRS1979

Kinetics of the phase transformation in a Ti-15Mo-5Zr-3Al alloy as studied by X-ray diffraction

The purpose of the study is to make the T-T-T diagram available and to describe the X-ray diffraction techniques used to determine the fraction of transformed phase in the Ti-15Mo-5Zr-3Al metastable beta-alloy which decomposes into the hexagonal alpha-phase and the bcc beta-phase of a higher Mo concentration. The sheet material studied for this study is not ideal for an X-ray examination because of both a rolling and annealing texture as well as grain size problems. These difficulties are overcome using special X-ray techniques. Equations are given that indicate the approximations to be accepted if pole figure data are disregarded. Lattice parameter data from the beta phase enables one to obtain an approximate phase diagram.

Rao, V. B.↗

NASA NTRS1979

Low-temperature softening in body-centered cubic alloys

In the low-temperature range, bcc alloys exhibit a lower stress-temperature dependence than the pure base metals. This effect often leads to a phenomenon that is called 'alloy softening': at low temperatures, the yield stress of an alloy may be lower than that of the base metal. Various theories are reviewed; the most promising are based either on extrinsic or intrinsic models of low-temperature deformation. Some other aspects of alloy softening are discussed, among them the effects on the ductile-brittle transition temperature.

Pink, E.↗

NASA NTRS1982

Optical conductivity of amorphous Ta and beta-Ta films

Tantalum films evaporated in high vacuum onto liquid-nitrogen-cooled substrates had an amorphous structure that persisted even after warming to room temperature. The optical conductivity (as well as the dc conductivity) of the amorphous films differed significantly from that of the bcc films.

Nestell, J. E., Jr.↗