Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “attributed graphs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

The photometric roughness of Ariel is not unusual

Voyager 2 images of the Uranian satellite Ariel are reanalyzed, with a focus on the large-scale roughness parameter theta-bar. The techniques used to reduce the data and fit the Hapke parameters are described, and the results are presented in tables and graphs. Using the whole-disk phase curve, theta-bar of 27 + or - 1 deg is obtained, somewhat higher than but in good general agreement with the values for the other Uranian satellites. The anomalously high value (42 deg) found by Helfenstein et al. (1988) is attributed to miscalibration of the clear-filter image for phase angle 144.7 deg.

Skypeck, A.↗

Organization of P, S, and Fe Inclusions in a Freshwater Magnetococcus

Magnetotactic bacteria are a heterogeneous group of motile, mainly aquatic procaryotes that align and swim along geomagnetic field lines. They are of interest to astrobiologists because of the magnetite crystals found in the Mars meteorite ALH84001 which share many characteristics with the magnetite produced intracellularly by magnetotactic bacteria. These bacteria are diverse morphologically, physiologically and phylogenetically, sharing a few key characteristics: 1) the presence of intracellular membrane-bound magnetic crystals (magnetosomes), usually but not always arranged in chains; 2) motility by means of flagella; and 3) microaerophillic or anaerobic physiology. The bilophotrichous (having two flagella bundles) magnetotactic cocci (MC) are ubiquitous in aquatic habitats but have proven extremely difficult to cultivate. Because only several marine strains have been isolated and grown in axenic culture, little is known about the physiology and the biogeochemical roles of the MC. We studied the composition and distribution of intracellular structures in an uncultured MC, designated ARB-1. To do this, a combination of light microscopy, environmental scanning electron microscopy (ESEM), transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDS) were used. Cells of ARB-1 were separated from sediments collected from Baldwin Lake (Los Angeles Arboretum, Arcadia, CA). They are large spherical to oblate spheroidal Gram-negative cells, ranging from 1 to 4 micrometers along the maximum dimension, which is perpendicular to the direction of swimming. Cells have two large phosphorus-containing inclusions that comprise a large percentage of the cell volume. Many smaller sulfur inclusions are located at the convex end of the cell. Most of the cellular Fe is present in the magnetosomes. These may be arranged as a clump at the concave end of the cell, near the two flagella bundles, or as chains, or as both a clump and chains. The magnetosomes were identified as magnetite (Fe3O4) by selected area electron diffraction (SAED) and high resolution TEM. We saw a trend between cell size and organization of the magnetosomes. Smaller, more spherical cells were more likely to have chains than were larger, more oblate cells. This may indicate different populations of cells, or it may be attributed to variations in cell growth cycle. The size distribution (length) of magnetosomes in chains was similar to that of magnetosomes in clusters, except that there was a larger size range for clustered magnetosomes. Magnetosomes from ARB-1 cells average 82 nm in length. If plotted on a graph of length as a function of aspect ratio, they fall within the single domain region of the plot. If compared with the size distributions of magnetite from ALH84001 and magnetosomes from the cultured magnetotactic vibrio MV-1, the magnetites produced by ARB-1 cells are, on average, larger and have a wider range of aspect ratio. ARB-1 cells have a specific organization of the P, S, and Fe inclusions. The P inclusions always occupy the majority of the cell volume and separate the S inclusions from the disorganized clumps of magnetosomes and the flagella bundles. The P inclusions may contain polyphosphate, which could play several roles in motility, adaptation to stress, growth and division, buoyancy, and energy. The S inclusions might be a way to store S, a potential energy source, when the cells move from sulfide to oxygen zones. The consistency of P, S, and Fe organization in ARB-1 cells suggests that these inclusions have some specific and interactive functions.

Cox, Lea↗

Efficient parallel architecture for highly coupled real-time linear system applications

A systematic procedure is developed for exploiting the parallel constructs of computation in a highly coupled, linear system application. An overall top-down design approach is adopted. Differential equations governing the application under consideration are partitioned into subtasks on the basis of a data flow analysis. The interconnected task units constitute a task graph which has to be computed in every update interval. Multiprocessing concepts utilizing parallel integration algorithms are then applied for efficient task graph execution. A simple scheduling routine is developed to handle task allocation while in the multiprocessor mode. Results of simulation and scheduling are compared on the basis of standard performance indices. Processor timing diagrams are developed on the basis of program output accruing to an optimal set of processors. Basic architectural attributes for implementing the system are discussed together with suggestions for processing element design. Emphasis is placed on flexible architectures capable of accommodating widely varying application specifics.

Carroll, Chester C.↗

Vela X-1 pulse timing. II - Variations in pulse frequency

The pulsed X-ray emission of Vela X-1 during May 1978 and December-January 1978-1979 is investigated analytically on the basis of published satellite observations. The data are compiled in tables and graphs and discussed in detail, with reference to data for the entire 1975-1982 period. Variations in pulse frequency are identified on time scales from 2 to 2600 days; the lower nine octaves are characterized as white noise (or random walk in pulse frequency), while the longer-period variations are attributed to changes in neutron-star rotation rates.

Deeter, J. E.↗

Thermoregulation in cold- and noncold-acclimated rats cold exposed in hypergravic fields

The effect of hypergravity on thermoregulation processes is investigated experimentally in rats. Hooded male Long-Evans rats were kept for 6 weeks at 5 or 23 C (cold-acclimated and noncold-acclimated groups, CA and NCA) prior to testing. One test protocol comprised sequential 1-h exposures to 23 C at 1 G, 23 C at 3 G (in a 2.1-m radius centrifuge; -Gx), 8 C at 3 G, 8 C at 1 G, and finally 23 C at 1 G, with continuous measurement of the oxygen consumption. In a second protocol, restrained rats were exposed to 23 C at 1 G, 23 C at 3 G, and 10 C at 3 G, and core temperature changes were monitored. The results are presented in graphs and a table. Oxygen consumption doubled in both CA and NCA rats on exposure to cold at 1 G, but at 3 G NCA consumption decreased while CA consumption remained high. The CA rats were also more able to maintain core temperature at 3 G than the NCA rats. These differences are attributed to the nonshivering thermogenic processes developed in CA rats, which appear to be unaffected by hypergravity.

Horowitz, J. M.↗

A VLA survey of BY Draconis variables

Observations of seven rapidly rotating BY Dra variables, obtained at 6 cm with the D-to-A hybrid array of the VLA on three consecutive days in February, 1986, are reported. The results are presented in tables and graphs (along with data from simple VLA detection observations in 1985 and published optical and X-ray data) and characterized in detail. No strong correlation is found between the radio and optical emission in the one star (BY Dra) detected at more than one session, and the observable microwave emission of the stars is tentatively attributed to flares alone. A weak correlation between the X-ray luminosity and the maximum 6-cm luminosity of dMe stars is inferred, but the evidence is considered insufficient to establish a relationship between surface signs of magnetic activity and nonthermal radio emission.

Caillault, Jean-Pierre↗

Radio science with Voyager 2 at Uranus - Results on masses and densities of the planet and five principal satellites

Phase-coherent Doppler data generated by the Deep Space Network with the radio communication system during the Voyager 2 encounter with Uranus in January 1986, optical navigation data generated by the Voyager Navigation Team with the Voyager 2 imaging system, and ground-based astrometric data obtained over an 8-yr period are compiled and analyzed to determine the masses and densities of Uranus and its principal satellites. The data-analysis procedures are explained in detail, and the results are presented in tables and graphs. The mean density of Uranus is found to be 1.285 + or - 0.001 g/cu cm, whereas the mean uncompressed mass of all five satellites is 1.48 + or - 0.06 g/cu cm, or 0.10 g/cu cm above the density expected for a homogeneous solar mix of rock, H2O and NH3 ice, and CH4 as clathrate hydrate. This difference is tentatively attributed to the presence of 15 mass percent of pure graphite, which would provide the thermal conductivity required to keep the satellites cold and undifferentiated.

Anderson, J. D.↗

Coordinated optical and ultraviolet observations of DH Leo

Results are reported from contemporaneous KPNO optical spectroscopy, IUE UV spectroscopy, and KPNO R photometry of the DH Leo triple system in spring 1987. The data are presented in tables, graphs, and spectral phase images and discussed in detail. The H-alpha, H-beta, H-gamma, H-delta, and Ca II H and IRT lines are found to have excess emission, and the phase modulation in H-alpha, H-beta, and Ca II is well correlated with the photometric modulation. This result is attributed to the combination of (1) a small amount of global chromospheric emission and (2) emission from plagelike regions associated with cool starspots. The (H-alpha)/(H-beta) ratio is found to be significantly lower than that in longer-period RS CVn systems.

Newmark, Jeffrey S.↗

Program Analyzes Spacecraft/Ground Radio Links

A versatile computer program analyzes the link-design control table necessary for designing the telecommunication subsystem of a spacecraft in orbit around the Earth or on a deep-space mission. The program helps to calculate all the important parameter values for spacecraft-to-ground telemetry links and ground-to-spacecraft command links. The program also enables the design of turn-around ranging and one-way ranging links, which are very useful for determining the positions of spacecraft and for satisfying various other operational needs. The user can specify several aspects of spacecraft telecommunication-subsystem design, including the nature of the antenna (paraboloidal reflector, patch, dipole, etc.), the power-amplifier rating, and the link data rate. The program enables the use of comparative design procedures and includes an extensive database on the capabilities, attributes, and costs of commercially available telecommunications equipment. Hence, the program can also perform cost analyses. The software includes an extensive ground-station database, so that link design can be carried out using different ground stations in a comparative process in an effort to select the best design. The output of the program is in the form of graphs as well as numbers.

Lansing, Faiza↗

Comparison of Traditional Design Nonlinear Programming Optimization and Stochastic Methods for Structural Design

Structural design generated by traditional method, optimization method and the stochastic design concept are compared. In the traditional method, the constraints are manipulated to obtain the design and weight is back calculated. In design optimization, the weight of a structure becomes the merit function with constraints imposed on failure modes and an optimization algorithm is used to generate the solution. Stochastic design concept accounts for uncertainties in loads, material properties, and other parameters and solution is obtained by solving a design optimization problem for a specified reliability. Acceptable solutions were produced by all the three methods. The variation in the weight calculated by the methods was modest. Some variation was noticed in designs calculated by the methods. The variation may be attributed to structural indeterminacy. It is prudent to develop design by all three methods prior to its fabrication. The traditional design method can be improved when the simplified sensitivities of the behavior constraint is used. Such sensitivity can reduce design calculations and may have a potential to unify the traditional and optimization methods. Weight versus reliabilitytraced out an inverted-S-shaped graph. The center of the graph corresponded to mean valued design. A heavy design with weight approaching infinity could be produced for a near-zero rate of failure. Weight can be reduced to a small value for a most failure-prone design. Probabilistic modeling of load and material properties remained a challenge.

Patnaik, Surya N.↗

Compiling and editing agricultural strata boundaries with remotely sensed imagery and map attribute data using graphics workstations

The USDA presently uses labor-intensive photographic interpretation procedures to delineate large geographical areas into manageable size sampling units for the estimation of domestic crop and livestock production. Computer software to automate the boundary delineation procedure, called the computer-assisted stratification and sampling (CASS) system, was developed using a Hewlett Packard color-graphics workstation. The CASS procedures display Thematic Mapper (TM) satellite digital imagery on a graphics display workstation as the backdrop for the onscreen delineation of sampling units. USGS Digital Line Graph (DLG) data for roads and waterways are displayed over the TM imagery to aid in identifying potential sample unit boundaries. Initial analysis conducted with three Missouri counties indicated that CASS was six times faster than the manual techniques in delineating sampling units.

Cheng, Thomas D.↗

Issues and Strategies in Solving Multidisciplinary Optimization Problems

Optimization research at NASA Glenn Research Center has addressed the design of structures, aircraft and airbreathing propulsion engines. The accumulated multidisciplinary design activity is collected under a testbed entitled COMETBOARDS. Several issues were encountered during the solution of the problems. Four issues and the strategies adapted for their resolution are discussed. This is followed by a discussion on analytical methods that is limited to structural design application. An optimization process can lead to an inefficient local solution. This deficiency was encountered during design of an engine component. The limitation was overcome through an augmentation of animation into optimization. Optimum solutions obtained were infeasible for aircraft and airbreathing propulsion engine problems. Alleviation of this deficiency required a cascading of multiple algorithms. Profile optimization of a beam produced an irregular shape. Engineering intuition restored the regular shape for the beam. The solution obtained for a cylindrical shell by a subproblem strategy converged to a design that can be difficult to manufacture. Resolution of this issue remains a challenge. The issues and resolutions are illustrated through a set of problems: Design of an engine component, Synthesis of a subsonic aircraft, Operation optimization of a supersonic engine, Design of a wave-rotor-topping device, Profile optimization of a cantilever beam, and Design of a cylindrical shell. This chapter provides a cursory account of the issues. Cited references provide detailed discussion on the topics. Design of a structure can also be generated by traditional method and the stochastic design concept. Merits and limitations of the three methods (traditional method, optimization method and stochastic concept) are illustrated. In the traditional method, the constraints are manipulated to obtain the design and weight is back calculated. In design optimization, the weight of a structure becomes the merit function with constraints imposed on failure modes and an optimization algorithm is used to generate the solution. Stochastic design concept accounts for uncertainties in loads, material properties, and other parameters and solution is obtained by solving a design optimization problem for a specified reliability. Acceptable solutions can be produced by all the three methods. The variation in the weight calculated by the methods was found to be modest. Some variation was noticed in designs calculated by the methods. The variation may be attributed to structural indeterminacy. It is prudent to develop design by all three methods prior to its fabrication. The traditional design method can be improved when the simplified sensitivities of the behavior constraint is used. Such sensitivity can reduce design calculations and may have a potential to unify the traditional and optimization methods. Weight versus reliability traced out an inverted-S-shaped graph. The center of the graph corresponded to mean valued design. A heavy design with weight approaching infinity could be produced for a near-zero rate of failure. Weight can be reduced to a small value for a most failure-prone design. Probabilistic modeling of load and material properties remained a challenge.

Patnaik, Surya↗

The C-12/C-13 isotope ratio of the interstellar medium in the neighborhood of the sun

Data from observations of Xi Per, P Cyg, 20 Tau, and 23 Tau, obtained at 4232 and 3957 A using a coude spectrograph and a 1872-element reticon on the 3-m Shane telescope at Lick Observatory during 1984-1985, are combined with data on Zeta Oph (Hawkins et al., 1985) and used to estimate the C isotope ratio of the ISM near the sun. The results are presented in extensive tables and graphs and characterized in detail. The (C-12)H(+)/(C-13)H(+) abundance ratios toward the five stars are found to agree to within 12 percent and shown to be representative of the C-12/C-13 ratios in the gas, strongly indicating that the local ISM is homogeneous. The difference between the ISM ratio (43 + or - 4) and the solar-system value (89) is attributed to the chemical evolution of the ISM in the 4.9 Gyr since the formation of the sun.

Hawkins, Isabel↗

Type II bursts, shock waves, and coronal transients - The event of 1980 June 29, 0233 UT

The metric Type-II solar burst event of June 29, 1980, is characterized on the basis of spatially resolved radioheliograph observations obtained at Culgoora, Australia, and visible-light observations obtained with the coronograph/polarimeter of the SMM satellite. The data are presented in images, diagrams, and graphs and discussed in detail. The Type-II emission is found to arise in the dense moving material behind the transient loops, which have sky-plane width 0.5 solar radius and line-of-sight depth 0.1-0.4 solar radius. A faint arc observed moving ahead of the transient loops at about 900 km/sec and not associated with the Type-II burst is attributed to a shock front, and the compression ratio and Alfven Mach number of the enhanced-density region are estimated as n2/n1 = 1.3-3 and M(A) = 1.2-3. The ambient material at 3 solar radii is determined to have Alfven speed 250-625 km/sec and magnetic-field strength 50-120 mG. The total mass of the event is calculated as 700 Tg; the total magnetic energy of the loops is (1.5-15) x 10 to the 29th ergs.

Gary, D. E.↗

Dynamical features of the plasma-sheet ion composition, density, and energy

The effects of changes in solar and geomagnetic activity on the major plasma-sheet ions are investigated on the basis of a statistical analysis of 1500 h of data obtained at distances 10-23 earth radii and energy/charge ratios 0.1-16 keV/e by the ISEE-1 energetic-ion mass spectrometer. The results are presented in extensive graphs and discussed in detail. It is found that substorm activity is accompanied by a significant decrease in the density of solar-origin H(+) ions, a sharp increase in the energy per nucleon of both H(+) and He(+) ions, and an increase in the density of terrestrial O(+) ions. A factor-of-three increase in the overall O(+) density over the observation period is attributed to an increase in the solar EUV flux.

Lennartsson, W.↗

Sensitivity of an energy balance climate model with predicted snowfall rates

A snowfall parameterization and a polar-ice-sheet model are developed and applied to the two-level zonally averaged seasonal energy-balance climate model of Held and Suarez (1979), and sensitivity experiments involving changes in insolation are performed both with and without ice sheets. The results are presented in tables and graphs, and the hydrological-cycle response to insolation changes is found to be similar to that predicted by global-circulation models employing prescribed precipitation levels, with a somewhat higher sensitivity in the snow line. The area covered by ice sheets in the ice-sheet models is shown to be greater than that covered by permanent snow in the models without ice sheets, an effect attributed to lower surface temperatures over the ice. It is inferred that an increase in the solar constant can cause increased high-latitude precipitation but not an ice age.

Bowman, K. P.↗

Laboratory simulation of meteoritic noble gases. II - Sorption of xenon on carbon: Etching and heating experiments

The release of trapped Xe from amorphous-C phases of meteorites is simulated experimentally by HNO3 etching of carbon-black and pyrolyzed polyvinylidene chloride samples exposed to Xe-127 for 0.5-240 h at 100-1000 C and then degassed for 9 h or more at the same temperatures, as reported by Wacker et al. (1985). The results are presented in tables and graphs and characterized in detail. Samples exposed at 100-200 C are found to lose most of their Xe after etching to a depth of only about 20 pm, while those exposed at 800-1000 C exhibit a second more tightly bound component extending to a depth of 3 nm, indicative of diffusion of Xe during exposure and resembling planetary Xe. The higher noble-gas concentrations measured in meteorites are attributed to rate-controlled Xe uptake over a long period in the solar nebula.

Zadnik, M. G.↗

Rb-Sr, Sm-Nd, K-Ca, O, and H isotopic study of Cretaceous-Tertiary boundary sediments, Caravaca, Spain Evidence for an oceanic impact site

The results of isotopic and trace-element-abundance analyses of Ir-enriched Cretaceous-Tertiary-boundary clay sediments from Caravaca, Spain, and of adjacent carbonate and marl layers, are presented. Acetic-acid and HCl leachates and residues were analyzed by isotope dilution to determine K, Rb, Sr, Sm, and Nd concentrations and Sr-87/Sr-86 and Nd-143/Nd-144 ratios. The stable isotope ratios delta-D, delta-(C-13), and delta-(0-18) were also determined. The results are presented in tables and graphs and compared with published data on the Caravaca sediments and on samples from other locations. The boundary clay is found to be distinguished from the adjacent layers by its isotopic ratios and to be of mainly terrestrial, lithospheric (deeper than 3-km) origin. Although submarine-weathering effects are evident and difficult to quantify, the degree of variation in Ni, Ir, Sr, and REE concentrations is considered too large to be attributed to postdepositional processes alone. These findings are seen as evidence for the ocean impact of a large single asteroid producing a worldwide blanket of ejecta, a large injection of water vapor into the atmosphere, and perhaps a gigantic tsunami, at the end of the Cretaceous period.

Depaolo, D. J.↗