Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “arc density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Electrothermal oscillations and the quasilinear theory of electron enthalpy fluctuations in magnetohydrodynamic generators and magnetoplasmadynamic arc thrusters

Flucturations in electron density and temperature coupled through OHM's Law are studied for MHD power generator and MPD arc thruster applications. The dispersion relation based on linear theory is derived, and the two limiting cases of infinite ionization rate and frozen flow are examined. The nonlinear effects of the frozen flow case are then studied in the quasilinear limit. Equations are derived for the amplitude of the fluctuation and its effect upon Ohm's Law and the electron temperature equation. Conditions under which a steady state can exist in the presence of the fluctuation are examined, and effective transport properties are determined.

Smith, J. M.↗
NASA NTRS1971

Rocket-based measurement of Birkeland currents related to an auroral arc and electrojet.

A rocket-borne experiment performed to study currents associated with a quiet auroral arc is discussed. The magnetic field in the vicinity of the arc was measured with a vector magnetometer, while the orientation of the payload was determined with a lunar-aspect sensor. Possible current configurations were inferred by constructing model current systems that reproduced the magnetic field variations measured along the flight path. The data are interpreted in terms of a model current system consisting of a northwestward electrojet and two oppositely directed Birkeland sheet currents, all lying in planes approximately parallel to the auroral arc. The current density integrated through the 16-km thickness of each Birkeland current sheet was found to be roughly 0.16 A/m. The electrojet current was roughly 6000 A.

Park, R. J.↗
NASA NTRS1977

Recombination lasing in a magnetoplasmadynamic arcjet

The plasmadynamic recombination laser concept is verified experimentally in a high power quasi-steady MPD arcjet operating at 4 kA and 12 g/sec of argon. Measurements of the spatial variation of electron temperature, electron density, and population densities in the arc exhaust flow confirm that inverted populations of the 4p to 4s Ar II transitions are established by collisional-radiative recombination of the Ar III ion. Using an optical cavity aligned transversely to the flow, recombination lasing of four such transitions, 5145, 4880, 4764 and 4727 A, is observed spectro-photographically and photoelectrically over the entire 1-msec discharge.

Campbell, E. M.↗
NASA NTRS1977

Recombination lasing in a magnetoplasmadynamic arcjet

The plasmadynamic recombination laser concept is verified experimentally in a high-power quasisteady MPD arcjet operating at 4 kA and 12 g/sec of argon. Measurements of the spatial variation of electron temperature, electron density, and population densities in the arc exhaust flow confirm that inverted populations of the 4p to 4s ArII transitions are established by collisional-radiative recombination of the ArIII ion. Using an optical cavity aligned transversely to the flow, recombination lasing of four such transitions, 5145, 4880, 4764, and 4727 A, is observed spectrophotographically and photoelectrically over the entire 1-msec discharge.

Campbell, E. M.↗
NASA NTRS1980

Recombination lasing in a magnetoplasmadynamic arcjet

The plasmadynamic recombination laser concept is verified experimentally in a high-power quasisteady MPD arcjet operating at 4 kA and 12 g/sec of argon. Measurements of the spatial variation of electron temperature, electron density, and population densities in the arc exhaust flow confirm that inverted populations of the 4p to 4s Ar II transitions are established by collisional-radiative recombination of the Ar III ion. Using an optical cavity aligned transversely to the flow, recombination lasing of seven such transitions, 5145, 4880, 4764, 4727, 4658, 4579, and 4545 A, is observed spectrophotographically and photoelectrically over the entire 1-msec discharge.

Campbell, E. M.↗
NASA NTRS1992

NASA Ames's electric arc-driven shock tube facility and research on nonequilibrium phenomena in low density hypersonic flows

Basic requirements for a ground test facility simulating low density hypersonic flows are discussed. Such facilities should be able to produce shock velocities in the range of 10-17 km/sec in an initial pressure of 0.010 to 0.050 Torr. The facility should be equipped with diagnostics systems to be able to measure the emitted radiation, characteristic temperatures and populations in various energy levels. In the light of these requirements, NASA Ames's electric arc-driven low density shock tube facility is described and available experimental diagnostics systems and computational tools are discussed.

Sharma, Surendra P.↗
NASA NTRS2001

Arc Inception Mechanism on a Solar Array Immersed in a Low-Density Plasma

In this report, results are presented of an experimental and theoretical study of arc phenomena and snapover for two samples of solar arrays immersed in argon plasma. The effects of arcing and snapover are investigated. I-V curves are measured, and arc and snapover inception voltages and arc rates are determined within the wide range of plasma parameters. A considerable increase in arc rate due to absorption of molecules from atmospheric air has been confirmed. It is shown that increasing gas pressure causes increasing ion current collection and, consequently, arc rate even though the effect of conditioning also takes place. Arc sites have been determined by employing a video-camera. It is confirmed that keeping sample under high vacuum for a long time results in shifting arc threshold voltage well below -300 V. The results obtained seem to be important for the understanding of arc inception mechanism.

Vayner, B.↗
NASA NTRS1976

A simulation for gravity fine structure recovery from low-low GRAVSAT SST data

Covariance error analysis techniques were applied to investigate estimation strategies for the low-low SST mission for accurate local recovery of gravitational fine structure, considering the aliasing effects of unsolved for parameters. A 5 degree by 5 degree surface density block representation of the high order geopotential was utilized with the drag-free low-low GRAVSAT configuration in a circular polar orbit at 250 km altitude. Recovery of local sets of density blocks from long data arcs was found not to be feasible due to strong aliasing effects. The error analysis for the recovery of local sets of density blocks using independent short data arcs demonstrated that the estimation strategy of simultaneously estimating a local set of blocks covered by data and two "buffer layers" of blocks not covered by data greatly reduced aliasing errors.

Estes, R. H.↗
NASA NTRS1986

On the distance measure for gravitational lenses

A discussion is presented of some of the physical elements that are important for geometric optics in curved space-time, with a view toward interpreting data on gravitational lenses. This is important because each gravitational lens provides geometrical information about an arc that crosses a substantial portion of the universe. The propagation of photons along long arcs is highly sensitive to the mean density in the beam, averaged along the arc. Fluctuations about this mean are not important unless their scale is comparable to that of the universe. Tidal distortion is important if only a few lumps are involved. The variation in the geometrical optics is considerably greater if there is a nonzero cosmological constant.

Alcock, C.↗
NASA NTRS1993

Plasma arc welding repair of space flight hardware

Repair and refurbishment of flight and test hardware can extend the useful life of very expensive components. A technique to weld repair the main combustion chamber of space shuttle main engines has been developed. The technique uses the plasma arc welding process and active cooling to seal cracks and pinholes in the hot-gas wall of the main combustion chamber liner. The liner hot-gas wall is made of NARloyZ, a copper alloy previously thought to be unweldable using conventional arc welding processes. The process must provide extensive heat input to melt the high conductivity NARloyZ while protecting the delicate structure of the surrounding material. The higher energy density of the plasma arc process provides the necessary heat input while active water cooling protects the surrounding structure. The welding process is precisely controlled using a computerized robotic welding system.

Hoffman, David S.↗
NASA NTRS1993

Plasma arc welding repair of space flight hardware

A technique to weld repair the main combustion chamber of Space Shuttle Main Engines has been developed. The technique uses the plasma arc welding process and active cooling to seal cracks and pinholes in the hot-gas wall of the main combustion chamber liner. The liner hot-gas wall is made of NARloy-Z, a copper alloy previously thought to be unweldable using conventional arc welding processes. The process must provide extensive heat input to melt the high conductivity NARloy-Z while protecting the delicate structure of the surrounding material. The higher energy density of the plasma arc process provides the necessary heat input while active water cooling protects the surrounding structure. The welding process is precisely controlled using a computerized robotic welding system.

Hoffman, David S.↗
NASA NTRS1971

Calculated and observed features of stable auroral red arcs during three geomagnetic storms.

Satellite electron temperature and density data are used to calculate the structure of several stable auroral red arcs (SAR arcs) according to the thermal conduction model of the arc. The calculated lambda 6300 emission rates are compared with ground-based photometric observations taken at the same time and in the vicinity of the satellite crossings of the arcs. The SAR arcs analyzed include a range of lambda 6300 intensities, geographical locations, and times during the associated geomagnetic storm. In addition, satellite data were obtained at different altitudes over and within the SAR-arc region. Enhanced electron temperatures within or on the equatorward edge of an electron-density depression are common features of all the SAR arcs examined. There is general agreement between the calculated and observed lambda 6300 emission features for SAR arcs observed during the geomagnetic storm periods of Oct. 29 to Nov. 2, 1968, May 14-15, 1969, and Mar. 8-9, 1970. For these SAR arcs, thermal conduction from the magnetosphere alone is sufficient to excite the lambda 6300 emission to its observed intensity.

Roble, R. G.↗
NASA NTRS1984

Association between energetic particle bursts and Birkeland currents in the geomagnetic tail

IMP 8 observations in the geomagnetic tail of energetic particles at hundreds of keV and of the magnetic field are examined for a substorm period from 1700 to 1800 UT on Mar. 3, 1976. For this interval, it is found that bursts of energetic protons detected at a downstream distance of about 37 earth radii in the midnight tail region are accompanied by east-west magnetic field perturbations indicative of Birkeland current sheets. The magnitude of the magnetic field perturbations range from about 1 to 12 nT, corresponding to current densities of 1 to 9 mA/m when integrated over the current sheet thickness. These values are comparable to previous observations of Birkeland currents in the near-earth tail (X greater than -20 earth radii) and with the auroral-arc-associated Birkeland current densities at low altitudes scaled out to the tail region. The favorable comparison suggests that the closure of small-scale Birkeland current systems, at least in these instances, lies tailward of about 40 earth radii. The observed Birkeland current system and the magnitude of current densities are found to be consistent with ion tearing instability in the tail. The inferred wavelength of the tearing mode along the tail axis is about 2 to 17 earth radii. In the context of the tearing model, the presence of Birkeland currents and the occasional isotropic distribution of energetic electrons (of more than 0.22 MeV) suggest that the energetic particle events in this study occur on closed magnetic field lines, even though strong tailward streaming dominates the particle anisotropy in these events.

Lui, A. T. Y.↗