Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “arc density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Vertical distribution of vibrational energy of molecular nitrogen in a stable auroral red arc and its effect on ionospheric electron densities

Previous solutions of the problem of the distribution of vibrationally excited molecular nitrogen in the thermosphere have either assumed a Boltzmann distribution and considered diffusion as one of the loss processes or solved for the energy level populations and neglected diffusion. Both of the previous approaches are combined by solving the time dependent continuity equations, including the diffusion process, for the first six energy levels of molecular nitrogen for conditions in the thermosphere corresponding to a stable auroral red arc. The primary source of molecular nitrogen excitation was subexcitation, and inelastic collisions between thermal electrons and molecular nitrogen. The reaction rates for this process were calculated from published cross section calculations. The loss processes for vibrational energy were electron and atomic oxygen quenching and vibrational energy exchange. The coupled sets of nonlinear, partial differential equations were solved numerically by employing finite difference equations.

Newton, G. P.↗
NASA NTRS1994

Mechanisms of anode power deposition in a low pressure free burning arc

Anode power deposition is a dominant power loss mechanism for arc jets and MPD thrusters. In this study, a free burning arc experiment was operated at pressures and current densities similar to those in arc jets and MPD thrusters in an attempt to identify the physics controlling this loss mechanism. Use of a free burning arc allowed for the isolation of independent variables controlling anode power deposition and provided a convenient and flexible way to cover a broad range of currents, anode surface pressures, and applied magnetic field strengths and orientations using an argon gas. Test results showed that anode power deposition decreased with increasing anode surface pressure up to 6.7 Pa (0.05 torr) and then became insensitive to pressure. Anode power increased with increasing arc current while the electron number density near the anode surface increased linearity. Anode power also increased with increasing applied magnetic field strength due to an increasing anode fall voltage. Applied magnetic field orientation had an effect only at high currents and low anode surface pressures, where anode power decreased when applied field lines intercepted the anode surface. The results demonstrated that anode power deposition was dominated by the current carrying electrons and that the anode fall voltage was the largest contributor. Furthermore, the results showed that anode power deposition can be reduced by operating at increased anode pressures, reduced arc currents, and applied magnetic field strengths and with magnetic field lines intercepting the anode.

Soulas, George C.↗
NASA NTRS1972

Electrothermal oscillations and the quasilinear theory of electron enthalpy fluctuations in magnetohydrodynamic generators and magnetoplasmadynamic arc thrusters

Flucturations in electron density and temperature coupled through OHM's Law are studied for MHD power generator and MPD arc thruster applications. The dispersion relation based on linear theory is derived, and the two limiting cases of infinite ionization rate and frozen flow are examined. The nonlinear effects of the frozen flow case are then studied in the quasilinear limit. Equations are derived for the amplitude of the fluctuation and its effect upon Ohm's Law and the electron temperature equation. Conditions under which a steady state can exist in the presence of the fluctuation are examined, and effective transport properties are determined.

Smith, J. M.↗
NASA NTRS1971

Rocket-based measurement of Birkeland currents related to an auroral arc and electrojet.

A rocket-borne experiment performed to study currents associated with a quiet auroral arc is discussed. The magnetic field in the vicinity of the arc was measured with a vector magnetometer, while the orientation of the payload was determined with a lunar-aspect sensor. Possible current configurations were inferred by constructing model current systems that reproduced the magnetic field variations measured along the flight path. The data are interpreted in terms of a model current system consisting of a northwestward electrojet and two oppositely directed Birkeland sheet currents, all lying in planes approximately parallel to the auroral arc. The current density integrated through the 16-km thickness of each Birkeland current sheet was found to be roughly 0.16 A/m. The electrojet current was roughly 6000 A.

Park, R. J.↗
NASA NTRS1977

Recombination lasing in a magnetoplasmadynamic arcjet

The plasmadynamic recombination laser concept is verified experimentally in a high power quasi-steady MPD arcjet operating at 4 kA and 12 g/sec of argon. Measurements of the spatial variation of electron temperature, electron density, and population densities in the arc exhaust flow confirm that inverted populations of the 4p to 4s Ar II transitions are established by collisional-radiative recombination of the Ar III ion. Using an optical cavity aligned transversely to the flow, recombination lasing of four such transitions, 5145, 4880, 4764 and 4727 A, is observed spectro-photographically and photoelectrically over the entire 1-msec discharge.

Campbell, E. M.↗
NASA NTRS1977

Recombination lasing in a magnetoplasmadynamic arcjet

The plasmadynamic recombination laser concept is verified experimentally in a high-power quasisteady MPD arcjet operating at 4 kA and 12 g/sec of argon. Measurements of the spatial variation of electron temperature, electron density, and population densities in the arc exhaust flow confirm that inverted populations of the 4p to 4s ArII transitions are established by collisional-radiative recombination of the ArIII ion. Using an optical cavity aligned transversely to the flow, recombination lasing of four such transitions, 5145, 4880, 4764, and 4727 A, is observed spectrophotographically and photoelectrically over the entire 1-msec discharge.

Campbell, E. M.↗
NASA NTRS1980

Recombination lasing in a magnetoplasmadynamic arcjet

The plasmadynamic recombination laser concept is verified experimentally in a high-power quasisteady MPD arcjet operating at 4 kA and 12 g/sec of argon. Measurements of the spatial variation of electron temperature, electron density, and population densities in the arc exhaust flow confirm that inverted populations of the 4p to 4s Ar II transitions are established by collisional-radiative recombination of the Ar III ion. Using an optical cavity aligned transversely to the flow, recombination lasing of seven such transitions, 5145, 4880, 4764, 4727, 4658, 4579, and 4545 A, is observed spectrophotographically and photoelectrically over the entire 1-msec discharge.

Campbell, E. M.↗
NASA NTRS1992

NASA Ames's electric arc-driven shock tube facility and research on nonequilibrium phenomena in low density hypersonic flows

Basic requirements for a ground test facility simulating low density hypersonic flows are discussed. Such facilities should be able to produce shock velocities in the range of 10-17 km/sec in an initial pressure of 0.010 to 0.050 Torr. The facility should be equipped with diagnostics systems to be able to measure the emitted radiation, characteristic temperatures and populations in various energy levels. In the light of these requirements, NASA Ames's electric arc-driven low density shock tube facility is described and available experimental diagnostics systems and computational tools are discussed.

Sharma, Surendra P.↗
DOE OSTI2022

Nanosynthesis by atmospheric arc discharges excited with pulsed-DC power: a review

Plasma technology is actively used for nanoparticle synthesis and modification. All plasma techniques share the ambition of providing high quality, nanostructured materials with full control over their crystalline state and functional properties. Pulsed-DC physical/chemical vapour deposition, high power impulse magnetron sputtering, and pulsed cathodic arc are consolidated low-temperature plasma processes for the synthesis of high-quality nanocomposite films in vacuum environment. However, atmospheric arc discharge stands out thanks to the high throughput, wide variety, and excellent quality of obtained stand-alone nanomaterials, mainly core–shell nanoparticles, transition metal dichalcogenide monolayers, and carbon-based nanostructures, like graphene and carbon nanotubes. Unique capabilities of this arc technique are due to its flexibility and wide range of plasma parameters achievable by modulation of the frequency, duty cycle, and amplitude of pulse waveform. The many possibilities offered by pulsed arc discharges applied on synthesis of low-dimensional materials are reviewed here. Periodical variations in temperature and density of the pulsing arc plasma enable nanosynthesis with a more rational use of the supplied power. Parameters such as plasma composition, consumed power, process stability, material properties, and economical aspects, are discussed. Lastly a brief outlook towards future tendencies of nanomaterial preparation is proposed. Atmospheric pulsed arcs constitute promising, clean processes providing ecological and sustainable development in the production of nanomaterials both in industry and research laboratories.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS2001

Arc Inception Mechanism on a Solar Array Immersed in a Low-Density Plasma

In this report, results are presented of an experimental and theoretical study of arc phenomena and snapover for two samples of solar arrays immersed in argon plasma. The effects of arcing and snapover are investigated. I-V curves are measured, and arc and snapover inception voltages and arc rates are determined within the wide range of plasma parameters. A considerable increase in arc rate due to absorption of molecules from atmospheric air has been confirmed. It is shown that increasing gas pressure causes increasing ion current collection and, consequently, arc rate even though the effect of conditioning also takes place. Arc sites have been determined by employing a video-camera. It is confirmed that keeping sample under high vacuum for a long time results in shifting arc threshold voltage well below -300 V. The results obtained seem to be important for the understanding of arc inception mechanism.

Vayner, B.↗
DOE OSTI2022

Implementation of a portable diagnostic system for Thomson scattering measurements on an electrothermal arc source

To fulfill the increasing needs of diagnostic support for researchers in plasma technology, a portable diagnostic package (PDP) equipped for both laser Thomson scattering (TS) and optical emission spectroscopy has been designed and constructed at Oak Ridge National Laboratory (ORNL), aiming to measure the temperature and number density of electrons and temperatures of ions in plasma devices. The PDP has been initially implemented on a high density and low temperature electrothermal arc source (ET-arc) at ORNL to test its TS capability. TS from the plasmas in the ET-arc has been obtained using the PDP. The electron temperature and number density were determined from TS spectra. These results were then compared to measurements from previous studies on the ET-arc. The TS diagnostic measured 0.8 ± 0.1, 1.3 ± 0.2, and 0.7 ± 0.1 eV and (4.4 ± 0.5) × 1021, (5.9 ± 0.7) × 1021, and (4.3 ± 0.5) x 1021 m-3, respectively, from three lines of sight that transect the plasma column.

He, Z. (ORCID:0000000183159882)↗
NASA NTRS1976

A simulation for gravity fine structure recovery from low-low GRAVSAT SST data

Covariance error analysis techniques were applied to investigate estimation strategies for the low-low SST mission for accurate local recovery of gravitational fine structure, considering the aliasing effects of unsolved for parameters. A 5 degree by 5 degree surface density block representation of the high order geopotential was utilized with the drag-free low-low GRAVSAT configuration in a circular polar orbit at 250 km altitude. Recovery of local sets of density blocks from long data arcs was found not to be feasible due to strong aliasing effects. The error analysis for the recovery of local sets of density blocks using independent short data arcs demonstrated that the estimation strategy of simultaneously estimating a local set of blocks covered by data and two "buffer layers" of blocks not covered by data greatly reduced aliasing errors.

Estes, R. H.↗
NASA NTRS1986

On the distance measure for gravitational lenses

A discussion is presented of some of the physical elements that are important for geometric optics in curved space-time, with a view toward interpreting data on gravitational lenses. This is important because each gravitational lens provides geometrical information about an arc that crosses a substantial portion of the universe. The propagation of photons along long arcs is highly sensitive to the mean density in the beam, averaged along the arc. Fluctuations about this mean are not important unless their scale is comparable to that of the universe. Tidal distortion is important if only a few lumps are involved. The variation in the geometrical optics is considerably greater if there is a nonzero cosmological constant.

Alcock, C.↗
NASA NTRS1993

Plasma arc welding repair of space flight hardware

Repair and refurbishment of flight and test hardware can extend the useful life of very expensive components. A technique to weld repair the main combustion chamber of space shuttle main engines has been developed. The technique uses the plasma arc welding process and active cooling to seal cracks and pinholes in the hot-gas wall of the main combustion chamber liner. The liner hot-gas wall is made of NARloyZ, a copper alloy previously thought to be unweldable using conventional arc welding processes. The process must provide extensive heat input to melt the high conductivity NARloyZ while protecting the delicate structure of the surrounding material. The higher energy density of the plasma arc process provides the necessary heat input while active water cooling protects the surrounding structure. The welding process is precisely controlled using a computerized robotic welding system.

Hoffman, David S.↗