Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “angular”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

A parametric study of effect of forebody shape on flow angularity at Mach 8

Flow angularity and static pressure measurements have been made on the lower surface of nine forebody models that simulate the bottom forward surface of a hypersonic aircraft. Measurements were made in an area of the forebody that represents the location of an inlet of a scramjet engine. A parametric variation of the forebody surface investigated the effect of: (1) spanwise curvature; (2) longitudinal curvature; and (3) planform shape on both flow angularity and static pressure distribution. Results of each of the three parametric variations of geometry were compared to those for the same flat delta forebody. Spanwise curvature results showed that a concave shape and the flat delta had the lowest flow angularity and lowest rate of increase in flow angularity with angle of attack. Longitudinal curvature results showed a convex surface to give the better flow at the higher angles of attack. The better of the two planform shapes tested was a convex elliptical shape. Limited flow field calculations were made at angles of attack using a three dimensional, method-of-characteristics program. In general, at all angles of attack there was agreement between data and theory.

Johnson, C. B.↗

Angular momentum transfer to the inner Jovian satellites

Transfer of angular momentum from Jupiter to the four inner satellites in the presence of the Jovian magnetic field is considered. Electron-flux measurements near Io's flux tube and theoretical estimates of the electric currents flowing through the same flux tube are used to estimate the angular-momentum transfer during the evolutionary history of the Jovian system. The results show that the electric currents are sufficient to have produced an angular-momentum transfer from Jupiter equal to the present angular momentum of the inner satellites.

Mogro-Campero, A.↗

The occultation of beta Scorpii by Jupiter. VII - The angular diameters of beta Scorpii A1 and A2

A new technique for measuring angular diameters of stars, which makes use of stellar images formed by planetary atmospheres during occultations, is described. This method has been applied to light curves of the 1971 May 13 occultation of beta Sco by Jupiter, yielding the angular diameters of the two early B stars comprising the spectroscopic binary beta Sco A. An angular diameter of about .000422 arcsec for beta Sco A1 and about .000264 arcsec is found for beta Sco A2. These angular diameters are in good agreement with that obtained with the intensity interferometer for beta Sco, a star of nearly the same magnitude and spectral type as beta Sco A1. If the distance to beta Sco A were precisely known, beta Sco A1 and A2 would become fundamental standards of mass, luminosity, and radius for early B stars. Present constraints on the distance and methods by which it could be accurately determined are discussed.

Elliot, J. L.↗

The evolution of rotating stars. III - Predicted surface rotation velocities for stars which conserve total angular momentum

Predicted surface rotation velocities for Population I stars at 10, 7, 5, 3, and 1.5 solar masses are presented. The surface velocities were computed for angular momentum with no radial redistribution, complete redistribution, and partial redistribution as predicted by consideration of circulation currents in rotating stars. Near the main sequence, rotational effects can reduce the moment of inertia of a star, so nonrotating models underestimate the expected velocities for evolving stars. On the red giant branch, angular momentum redistribution reduces the surface velocity by a factor of 2 or more, relative to the velocity expected for no radial redistribution. This removes the discrepancy between predicted and observed rotation rates for the K giants and makes it unlikely that these stars lose significant amounts of angular momentum by stellar winds. Calculations indicate that improved observations of the red giants in the Hyades cluster can be used to determine how angular momentum is redistributed by convection

Endal, A. S.↗

Models of Angular Momentum Input to a Circumterrestrial Swarm from Encounters with Heliocentric Planetesimals

Models of lunar origin in which the Moon accretes in orbit about the Earth from material approaching the Earth from heliocentric orbits must overcome a fundamental problem: the approach orbits of such material would be, in the simplest approximation, equally likely to be prograde or retrograde about the Earth, with the result that accretion of such material adds mass but not angular momentum to circumterrestrial satellites. Satellite orbits would then decay due to the resulting drag, ultimately impacting onto the Earth. One possibility for adding both material and angular momentum to Earth orbit is investigated: imbalance in the delivered angular momentum between pro and retrograde Earth passing orbits which arises from the three body dynamics of planetesimals approaching the Earth from heliocentric space. In order to study angular momentum delivery to circumterrestrial satellites, the near Earth velocities were numerically computed as a function of distance from the Earth for a large array of orbits systematically spanning heliocentric phase space.

Davis, D. R.↗

Observed mid-to-high latitude interchange of atmospheric angular momentum and some implications

Graphic illustration of midlatitude interchange of atmospheric angular momentum between distant regions is presented. An examination is conducted of the global distribution of atmospheric angular momentum during 1977-1978 and 1982-1983 in order to identify evidence of prominent short-term interchanges of relavitive atmospheric angular momentum between mid and high latitude zones in both hemispheres. Thirty-day detrended angular momentum time series, prepared from the NMC global zonal wind data, are examined in latitude bands. The results confirm that momentum can be selectively redistributed between tropical, temperate, and high latitudes in patterns indicative of the development and dissipation of interacting regions, described variously in studies on the index cycle, seesaws, and telecommunications.

Taylor, H. A., Jr.↗

Angular momentum transfer in low velocity oblique impacts - Implications for asteroids

An experimental study has been conducted for the low-velocity oblique impact efficiency of angular momentum transfer, which is defined as that fraction of incident angular momentum that is transferred to the rotation of a target. The results obtained suggest that more energetic impacts are able to transfer angular momentum more efficiently. In the cases of ricochetted projectiles, the fraction of angular momentum carried off by the ejecta was noted to be less than 30 percent. It is suggested that, if asteroid spin rates are due to mutual noncatastrophic collisions and the taxonomic classes are indicative of bulk properties, the differences between corresponding spin rates will be smaller than expected from a consideration of relative strength and density alone.

Yanagisawa, Masahisa↗

Spin-up of a rapidly rotating star by angular momentum loss - Effects of general relativity

It has recently been shown that a rapidly rotating Newtonian star can spin up by radiating angular momentum. Extremely fast pulsars losing energy and angular momentum by magnetic dipole radiation or gravitational radiation may exhibit this behavior. Here, we show that this phenomenon is more widespread for rapidly rotating stars in general relativity. We construct and tabulate polytropic sequences of fully relativistic rotating stars of constant rest mass and entropy. We find that the range of adiabatic indices allowing spin-up extends somewhat above 4/3 because of the nonlinear effects of relativistic gravity. In addition, there is a new class of 'supramassive' stars which will inevitably spin up by losing angular momentum regardless of their equation of state. A supramassive star, spinning up via angular momentum loss, will ultimately evolve until it becomes unstable to catastrophic collapse to a black hole. Spin-up in a rapidly rotating star may thus be an observational precursor to such collapse.

Cook, Gregory B.↗

A Study of Airplane Maneuvers with Special Reference to Angular Velocities

This investigation was undertaken by the National Advisory Committee for Aeronautics for the purpose of increasing our knowledge on the behavior of the airplane during various maneuvers and to obtain values of the maximum angular velocities and accelerations in flight. The method consisted in flying a JN4H airplane through various maneuvers while records were being taken of the control position, the air speed, the angular velocity and the acceleration along the Z axis. The results showed that the maximum angular velocity about the X axis of radians per second in a barrel roll. The maximum angular acceleration about the X axis of -2.10 radians per (second) to the 2nd power occurred in a spin, while the maximum about the Y axis was 1.40 radians per (second) to the 2nd power when pulling suddenly out of a dive. These results have direct application to the design of airplane parts, such as propeller shaft and instruments.

Reid, J E↗

The oceanic contribution to the Earth's seasonal angular momentum budget

Seasonal variations in the speed of the Earth's rotation manifest themselves as fluctuations in the length of the day (LOD) with an amplitude of about 1000 microseconds. We know from previous work that at least 95% of these variations can be accounted for in terms of angular momentum exchanged between the atmosphere and the solid Earth. Here we examine the respective contributions of the Antarctic Circumpolar Current (ACC) and the global oceans to the Earth's seasonal angular momentum budget, using in situ data from the Drake Passage and results from both the oceanic regional model (Fine Resolution Antarctic Model -- FRAM) of Webb et al. (1991) and the global ocanic model of Maier-Reimer et al. (1993) as analyzed by Brosche et al. (1990). The estimated annual contribution of the ACC (2-4 microsec) is much smaller than the total variation in the oceanic models or the existing LOD-AAM residual (both approximately 15-20 microsec). The estimated semi-annual ACC contribution (3-8 microsec) is offset by counter-current further north in both oceanic models, which exhibit larger semi-annual variations in planetary angular momentum. Further refinements in the Earth's seasonal angular momentum budget, therefore, will require the full (planetary plus relative) contribution of the global oceans in addition to that of the ACC.

Dickey, J. O.↗

Angular momentum exchange among the solid Earth, atmosphere, and oceans: A case study of the 1982-1983 El Nino event

The 1982-1983 El Nino/Southern Oscillation (ENSO) event was accompanied by the largest interannual variation in the Earth's rotation rate on record. In this study we demonstrate that atmospheric forcing was the dominant cause for this rotational anomaly, with atmospheric angular momentum (AAM) integrated from 1000 to 1 mbar (troposphere plus stratosphere) accounting for up to 92% of the interannual variance in the length of day (LOD). Winds between 100 and 1 mbar contributed nearly 20% of the variance explained, indicating that the stratosphere can play a significant role in the Earth's angular momentum budget on interannual time scales. Examination of LOD, AAM, and Southern Oscillation Index (SOI) data for a 15-year span surrounding the 1982-1983 event suggests that the strong rotational response resulted from constructive interference between the low-frequency (approximately 4-6 year) and quasi-biennial (approximately 2-3 year) components of the ENSO phenomenon, as well as the stratospheric Quasi-Biennial Oscillation (QBO). Sources of the remaining LOD discrepancy (approximately 55 and 64 microseconds rms residual for the European Centre for Medium-Range Forecasting (EC) and U.S. National Meteorological Center (NMC) analyses) are explored; noise and systematic errors in the AAM data are estimated to contribute 18 and 33 microseconds, respectively, leaving a residual (rms) of 40 (52) microseconds unaccounted for by the EC (NMC) analysis. Oceanic angular momentum contributions (both moment of inertia changes associated with baroclinic waves and motion terms) are shown to be candidates in closing the interannual axial angular momentum budget.

Dickey, J. O.↗

A test of galaxy evolutionary models via angular sizes

The relationship between angular size, magnitude, and redshift of faint galaxies is explored as a potential tool to distinguish between galaxy evolutionary models. Different models, based on merging, mild luminosity evolution, and no evolution, lead to different predictions of the angular size distribution, redshift- size relation, and magnitude-size relation. The merging model predicts significantly smaller sizes for faint galaxies than the standard model, because of the requirement for more intrinsically small faint objects at high redshift. A dwarf-rich no-evolution model also predicts small sizes for faint galaxies. The mild luminosity evolution model predicts more luminous galaxies of large angular size at high redshift, as does a standard no-evolution model. Prefurbishment Hubble Space Telescope (HST) Medium Deep Survey observations of magnitudes and sizes of faint galaxies indicate an excess of small versus large faint galaxies, favoring the dwarf rich, no evolution model with respect to the merging model; the other two models are more discrepant with the data. While these results cannot yet rule out with certainty any of the proposed models, they demonstrate the potential of angular size to discriminate between models of galaxy evolution, especially with the high-resolution HST wide field/planetary camera-2 (WFPC2) data.

Im, Myungshin↗

Task Space Angular Velocity Blending for Real-Time Trajectory Generation

The invention is embodied in a method of controlling a robot manipulator moving toward a target frame F(sub 0) with a target velocity v(sub 0) including a linear target velocity v and an angular target velocity omega(sub 0) to smoothly and continuously divert the robot manipulator to a subsequent frame F(sub 1) by determining a global transition velocity v(sub 1), the global transition velocity including a linear transition velocity v(sub 1) and an angular transition velocity omega(sub 1), defining a blend time interval 2(tau)(sub 0) within which the global velocity of the robot manipulator is to be changed from a global target velocity v(sub 0) to the global transition velocity v(sub 1) and dividing the blend time interval 2(tau)(sub 0) into discrete time segments (delta)t. During each one of the discrete time segments delta t of the blend interval 2(tau)(sub 0), a blended global velocity v of the manipulator is computed as a blend of the global target velocity v(sub 0) and the global transition velocity v(sub 1), the blended global velocity v including a blended angular velocity omega and a blended linear velocity v, and then, the manipulator is rotated by an incremental rotation corresponding to an integration of the blended angular velocity omega over one discrete time segment (delta)t.

Volpe, Richard A.↗

Anisotropy of the Cosmic Microwave Background Radiation on Large and Medium Angular Scales

This grant has supported work at Brown University on measurements of the 2.7 K Cosmic Microwave Background Radiation (CMB). The goal has been to characterize the spatial variations in the temperature of the CMB in order to understand the formation of large-scale structure in the universe. We have concurrently pursued two measurements using millimeter-wave telescopes carried aloft by scientific balloons. Both systems operate over a range of wavelengths, chosen to allow spectral removal of foreground sources such as the atmosphere, Galaxy, etc. The angular resolution of approx. 25 arcminutes is near the angular scale at which the most structure is predicted by current models to be visible in the CMB angular power spectrum. The main goal is to determine the angular scale of this structure; in turn we can infer the density parameter, Omega, for the universe as well as other cosmological parameters, such as the Hubble constant.

Houghton, Anthony↗

A Mechanism for Precise Linear and Angular Adjustment Utilizing Flexures

This paper describes the design and development of a mechanism for precise linear and angular adjustment. This work was in support of the development of a mechanical extensometer for biaxial strain measurement. A compact mechanism was required which would allow angular adjustments about perpendicular axes with better than 10(exp -3) degree resolution. The approach adopted was first to develop a means of precise linear adjustment. To this end, a mechanism based on the toggle principle was built with inexpensive and easily manufactured parts. A detailed evaluation showed that the resolution of the mechanism was better than 1 micron and that adjustments made by using the device were repeatable. In the second stage of this work, the linear adjustment mechanisms were used in conjunction with a simple arrangement of flexural pivots and attachment blocks to provide the required angular adjustments. A series of experiments conducted with an autocollimator showed that the resolution of the mechanisms was better than 10(exp -3) degrees. Also, the mechanism met all requirements regarding size, weight, and mechanical simplicity. Attempts to use the mechanism in conjunction with the biaxial extensometer under development proved unsuccessful. Any form of in situ adjustment was found to cause erratic changes in instrument output. These changes were due to problems with the suspension system. However, the subject mechanism performed well in its own right and appeared to have potential for use in other applications. One important advantage of flexure based mechanisms is that they can be designed to operate independently of screw threads. This raises the possibility that they can be used for precise linear and angular adjustment in a space environment.

Ellis, J. R.↗

Earth Rotation and Coupling to Changes in Atmospheric Angular Momentum

The research supported under the contract dealt primarily with: (a) the mechanisms responsible for the exchange of angular momentum between the solid Earth and atmosphere; (b) the quality of the data sets used to estimate atmospheric angular momentum; and (c) the ability of these data and of global climate models to detect low-frequency signals in the momentum and, hence, circulation of the atmosphere. Three scientific papers reporting on the results of this research were produced during the course of the contract. These papers identified the particular torques responsible for the peak in atmospheric angular momentum and length-of-day during the 1982-93 El Nino event, and, more generally, the relative roles of torques over land and ocean in explaining the broad spectrum of variability in the length-of-day. In addition, a tendency for interannual variability in atmospheric angular momentum to increase during the last several decades of the 20th century was found in both observations and a global climate model experiment.

Rosen, Richard D.↗

Angular Distribution of Elastically Scattered Electrons Determined and Its Effect on Collector Performance Computed

It has been demonstrated that the suppression of secondary electron emission significantly improves the performance of electron beam collectors (ref. 1). However, a complete analysis of the effects of secondary electron emission with respect to collector performance has not been possible because of the lack of quantitative data on angular distributions of secondary electrons. Secondary electrons are emitted with energies ranging from near zero to the energy of the incident primary. For our purposes, we define elastically scattered electrons as secondary electrons within 20 percent of the incident energy. Elastically scattered electrons are of great concern because their energy allows them to follow trajectories that can carry them almost anywhere within the vacuum envelope. If these secondaries leave the collector and reenter the slow wave circuit, they can produce undesired signal distortion and oscillation.This apparatus, which was built by Krainsky (ref. 2), was used at the NASA Lewis Research Center to obtain detailed measurements of the angular distributions of elastically scattered secondaries. Data were obtained for three surfaces of significant interest to collector applications: highly polished copper, copper roughened by ion sputtering, and isotropic graphite. Lewis researchers discovered that elastically scattered electrons have a complex angular distribution that is strongly dependent on the atomic number and surface morphology of the target material, as well as the energy and angle of incidence of the primary beam. At low energies, secondary emission from polished copper in the chosen energy range is primarily directed back to the source of primary electrons (backscattering). Forward scattering increases with primary energy until, at high energies, forward scattering dominates the angular distribution. Although back-scattered secondaries dominate the distributions of the textured copper surface, the yield is substantially lower. From the standpoint of secondary emission, isotropic graphite is the most attractive material because it exhibits low yield and little back scattering.

Krainsky, Isay L.↗

Grating angle magnification enhanced angular sensor and scanner

An angular magnification effect of diffraction is exploited to provide improved sensing and scanning. This effect is most pronounced for a normal or near-normal incidence angle in combination with a grazing diffraction angle, so such configurations are preferred. Angular sensitivity can be further enhanced because the width of the diffracted beam can be substantially less than the width of the incident beam. Normal incidence configurations with two symmetric diffracted beams are preferred, since rotation and vertical displacement can be readily distinguished. Increased sensitivity to vertical displacement can be provided by incorporating an interferometer into the measurement system. Quad cell detectors can be employed to provide sensitivity to rotation about the grating surface normal. A 2-D grating can be employed to provide sensitivity to angular displacements in two different planes (e.g., pitch and yaw). Combined systems can provide sensitivity to vertical displacement and to all three angular degrees of freedom.

Sun, Ke-Xun↗