Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “airy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Improved coordinates of features in the vicinity of the Viking lander site on Mars

The measurement of longitude of the Viking 1 landing site and the accuracy of the coordinates of features in the area around the landing site are discussed. The longitude must be measured photogrammatically from the small crater, Airy 0, which defines the 0 deg meridian on Mars. The computer program, GIANT, which was used to perform the analytical triangulations, and the photogrammetric computation of the longitude of the Viking 1 lander site are described. Improved coordinates of features in the vicinity of the Viking 1 lander site are presented.

Davies, M. E.↗
NASA NTRS1982

Venus - Comparison of gravity and topography in the vicinity of Beta Regio

The Doppler tracking data obtained from the Pioneer Venus Orbiter when it passed near Beta Regio yielded a peak vertical anomaly of 150 mGal when analyzed by our two stage procedure. A comparison of maps of the gravity and topography at comparable resolution shows a striking correlation. A scatter plot shows that the observed gravity anomaly is approximately 0.4 of that expected from uncompensated topography of half the mean density of Venus. However, the spectral admittance shows that the gravity anomalies can not be explained either by Airy compensation at fixed depth or by a model comprising an elastic plate atop an inviscid fluid. The gravity and topography variations may signify deep compensation or dynamic support for Beta Regio and more shallow compensation for other features.

Reasenberg, R. D.↗
NASA NTRS1982

Degree variances of the earth's potential, topography and its isostatic compensation

A spherical harmonic expansion of the earth's gravitational potential and equivalent rock topography to degree and order 180 is described. The potential implied by the topography considered as uncompensated and with isostatic compensation has been computed. Good agreement with the observed potential field is found when the depth of compensation in the Airy theory is assumed to be 50 km. At the higher degrees the correlation coefficient between the potential expansion and the equivalent rock topography is about 0.5. The Lachapelle equations for the topographic isostatic potential were tested using 1 x 1 deg equivalent rock topography. The degree variances agree at the lower degrees but at degree 36 the Lachapelle results using 5 deg data underestimate the potential degree variances by about one-third.

Rapp, R. H.↗
NASA NTRS1982

Mars - Gravity data analysis of the crater Antoniadi

Topography and gravity information for this 370-km crater are analyzed to determine a depth of compensation with an Airy isostatic model. A least squares fit to the gravity profile gives an estimate of 115 km for the depth of compensation. It is noted that Antoniadi is the only large Martian crater for which both topographic and gravity data are available for analysis. The goal here is to reduce these geophysical data for additional information on the internal structure of Mars. The results show that if Antoniadi had fully isostatically adjusted, the additional mass material would have been about 100 km below the surface. This is regarded as another data point for geophysicists developing the internal structure of Mars.

Sjogren, W. L.↗
NASA NTRS1983

Critique of 'Elastic thickness of the Venus lithosphere estimated from topography and gravity' by A. Cazenave and K. Dominh

A critique of a model of the near-surface structure of Venus by Cazenave and Dominh (1981) based on Pioneer Venus data on gravity and topography is presented. Two objections are raised, the first an assumption of Airy compensation at a depth of 6 km, and the second that a gravity-topography relation is sufficient to study the subsurface characteristics. It is shown that determination of the gravity field along the line of sight, and not along the vertical, is necessary for a valid geophysical model with the available data. It is concluded that the spacecraft data are sufficient to define constraints on models of the subsurface characteristics, but are not sufficient for actually describing the substrate.

Reasenberg, R. D.↗
NASA NTRS1984

Detection of extrasolar planets by the large deployable reflector

The best wavelength for observing Jupiter-size planetary companions to stars other than the Sun is one at which a planet's thermal emission is strongest; typically this would occur in the far-infrared region. It is assumed that the orbiting infrared telescope used is diffraction-limited so that the resolution of the planet from the central star is accomplished in the wings of the star's Airy pattern. Proxima Centauri, Barnard's Star, Wolf 359, and Epsilon Eridani are just a few of the many nearest main-sequence stars that could be studied with the large deployable relfector (LDR). The detectability of a planet improves for warmer planets and less luminous stars; therefore, planets around white dwarfs and those young planets which have sufficient internal gravitational energy release so as to cause a significant increase in their temperatures are considered. If white dwarfs are as old as they are usually assumed to be (5-10 billion yr), then only the nearest white dwarf (Sirius B) is within the range of LDR. The Ursa Major cluster and Perseu cluster are within LDR's detection range mainly because of their proximity and young age, respectively.

Hollenbach, D. J.↗
NASA NTRS1984

Venus - Ishtar gravity anomaly

The gravity anomaly associated with Ishtar Terra on Venus is characterized, comparing line-of-sight acceleration profiles derived by differentiating Pioneer Venus Orbiter Doppler residual profiles with an Airy-compensated topographic model. The results are presented in graphs and maps, confirming the preliminary findings of Phillips et al. (1979). The isostatic compensation depth is found to be 150 + or - 30 km.

Sjogren, W. L.↗
NASA NTRS1984

Lithospheric structure in the Pacific geoid

In order that sub-lithospheric density variations be revealed with the geoid, the regional geoid anomalies associated with bathymetric variations must first be removed. Spectral techniques were used to generate a synthetic geoid by filtering the residual bathymetry assuming an Airy-type isostatic compensation model. An unbiased estimated of the admittances show that for region under study, no single compensation mechanism will explain all of the power in the geoid. Nevertheless, because topographic features are mainly coherent with the geoid, to first order an isostationally compensated lithosphere cut by major E-W fracture zones accounts for most of the power in the high degree and other SEASAT geoid in the Pacific.

Marsh, B. D.↗
NASA NTRS1984

Light Scattered from Polished Optical Surfaces: Wings of the Point Spread Function

Random figure errors from the polishing process plus particles on the main mirrors in a telescope cause an extended point spread function (PSF) declining approximately as the inverse square of the sine of the angle from a star from about 100 micro-rad to a right angle. The decline in at least one case, and probably in general, proceeds as the inverse cube at smaller angles where the usual focal plane aperture radius is chosen. The photometric error due to misalignment by one Airy ring spacing with an aperture of n rings depends on the net variance in the figure. It is approximately 60/(n+1)(3) when using the data of Kormendy (1973). A typical value is 6 x 10 to the -5th power per ring of misalignment with n = 100 rings. The encircled power may be modulated on a time scale of hours by parts per thousand in a wavelength dependent manner due to relative humidity effects on mirror dust. The scattering according to an inverse power law is due to a random walk in aberration height caused by a multitude of facets and slope errors left by the polishing process. A deviation from such a law at grazing emergence may permit monitoring the dust effects.

Kenknight, C. E.↗
NASA NTRS1983

Remanent magnetization model for the broken ridge satellite magnetic anomaly

A crustal model for the interpretation of the Broken Ridge satellite magnetic anomaly was constructed from bathymetric data assuming an Airy-type isostatic compensation. An average crustal magnetization of 6 A.m is required to account for the observed anomaly amplitudes provided that the whole crust is homogeneously magnetized. In contrast, a model representing only the topographic expression of the Broken Ridge, above the surrounding sea floor, requires a magnetization of the order of 40 A.m-1. Since this latter figure is much higher than is to be expected from studies of magnetic properties of oceanic rocks, it is concluded that the majority of the crustal volume of Broken Ridge is magnetized relatively uniformly. The direction of the source magnetization is consistent with an inclination shallower than the present geomagnetic field and close to that of an axial dipole. Since a more northerly source location for Broken Ridge is contrary to the paleolatitude data it is though that the magnetization represents a magnetization obtained by averaging the geomagnetic field direction over a sufficient time to remove secular variation effects. This pattern is indicative of viscous magnetization.

Johnson, B. D.↗
NASA NTRS1985

Dynamic compensation of Venus's geoid: A comparison with Earth

Unlike Earth, on Venus long wavelength geoid anomalies correlate well with topography. Venus's admittance curve between harmonic degrees 3 and 18 is inconsistent with Airy isostasy but is consistent with dynamic support from convection being the dominant mechanism of compensation on Venus. We model dynamic compensation on Venus using simple flow models which assume a spherically symmetric Newtonian mantle viscosity profile. Preliminary models parameterize the viscosity variation with depth as a 2 layer model with a boundary at 720 km depth. A model in which viscosity in the lower mantle is a factor of 10 lower than in the upper mantle can explain Venus's observed admittance curve for degrees 3 through 18. Dynamic models which include a chemical boundary between the upper and lower mantle do not successfully explain the observed admittance curve, indicating that Venus does not have a chemically layered mantle.

Kiefer, W. S.↗
NASA NTRS1984

A dynamic model of Venus's gravity field

Unlike Earth, long wavelength gravity anomalies and topography correlate well on Venus. Venus's admittance curve from spherical harmonic degree 2 to 18 is inconsistent with either Airy or Pratt isostasy, but is consistent with dynamic support from mantle convection. A model using whole mantle flow and a high viscosity near surface layer overlying a constant viscosity mantle reproduces this admittance curve. On Earth, the effective viscosity deduced from geoid modeling increases by a factor of 300 from the asthenosphere to the lower mantle. These viscosity estimates may be biased by the neglect of lateral variations in mantle viscosity associated with hot plumes and cold subducted slabs. The different effective viscosity profiles for Earth and Venus may reflect their convective styles, with tectonism and mantle heat transport dominated by hot plumes on Venus and by subducted slabs on Earth. Convection at degree 2 appears much stronger on Earth than on Venus. A degree 2 convective structure may be unstable on Venus, but may have been stabilized on Earth by the insulating effects of the Pangean supercontinental assemblage.

Kiefer, W. S.↗
NASA NTRS1985

Venus gravity west of Beta Regio

Doppler tracking data from the Pioneer Venus Orbiter (PVO) have been used to estimate the anomalous gravity field in the region of Venus west of Beta Regio. The analysis invokes a Kalman filter-smoother to solve the nonlinear spacecraft state estimation problem and a linear Bayesian estimator to perform the geophysical inversion. The topographic map for this region, derived from the PVO radar, has been filtered to have the same distortions and degree of smoothing as the gravity map. The undulations of the gravity are about 0.2 times as large as expected from the topography, on the assumption that the latter is uncompensated. A comparison of the gravity and topography by means of the spectral admittance is consistent with Airy compensation at a depth of 50 km, if the surface material has a density of 2.6 g/cu cm. However, this is not a unique interpretation.

Goldberg, Z. M.↗
NASA NTRS1985

Focal plane optics in far-infrared and submillimeter astronomy

The construction of airborne observatories, high mountain-top observatories, and space observatories designed especially for infrared and submillimeter astronomy has opened fields of research requiring new optical techniques. A typical far-IR photometric study involves measurement of a continuum spectrum in several passbands between approx 30 microns and 1000 microns and diffraction-limited mapping of the source. At these wavelengths, diffraction effects strongly influence the design of the field optics systems which couple the incoming flux to the radiation sensors (cold bolometers). The Airy diffraction disk for a typical telescope at submillimeter wavelengths approx 100 microns-1000 microns is many millimeters in diameter; the size of the field stop must be comparable. The dilute radiation at the stop is fed through a Winston nonimaging concentrator to a small cavity containing the bolometer. The purpose of this paper is to review the principles and techniques of infrared field optics systems, including spectral filters, concentrators, cavities, and bolometers (as optical elements), with emphasis on photometric systems for wavelengths longer than 60 microns.

Hildebrand, R. H.↗
NASA NTRS1986

Quantitative void characterization in structural ceramics using scanning laser acoustic microscopy

The ability of scanning laser acoustic microscopy (SLAM) to characterize artificially seeded voids in sintered silicon nitride structural ceramic specimens was investigated. Using trigonometric relationships and Airy's diffraction theory, predictions of internal void depth and size were obtained from acoustic diffraction patterns produced by the voids. Agreement was observed between actual and predicted void depths. However, predicted void diameters were generally much greater than actual diameters. Precise diameter predictions are difficult to obtain due to measurement uncertainty and the limitations of 100 MHz SLAM applied to typical ceramic specimens.

Roth, D. J.↗
NASA NTRS1986

A dynamic model of Venus's gravity field

Unlike Earth, long wavelength gravity anomalies and topography correlate well on Venus. Venus's admittance curve from spherical harmonic degree 2 to 18 is inconsistent with either Airy or Pratt isostasy, but is consistent with dynamic support from mantle convection. A model using whole mantle flow and a high viscosity near surface layer overlying a constant viscosity mantle reproduces this admittance curve. On Earth, the effective viscosity deduced from geoid modeling increases by a factor of 300 from the asthenosphere to the lower mantle. These viscosity estimates may be biased by the neglect of lateral variations in mantle viscosity associated with hot plumes and cold subducted slabs. The different effective viscosity profiles for Earth and Venus may reflect their convective styles, with tectonism and mantle heat transport dominated by hot plumes on Venus and by subducted slabs on Earth. Convection at degree 2 appears much stronger on Earth than on Venus. A degree 2 convective structure may be unstable on Venus, but may have been stabilized on Earth by the insulating effects of the Pangean supercontinental assemblage.

Kiefer, W. S.↗
NASA NTRS1986

Focal plane optics in far-infrared and submillimeter astronomy

The construction of airborne observatories, high mountain-top observatories, and space observatories designed especially for infrared and submillimeter astronomy has opened fields of research requiring new optical techniques. A typical far-IR photometric study involves measurement of a continuum spectrum in several passbands between approx 30 microns and 1000 microns and diffraction-limited mapping of the source. At these wavelengths, diffraction effects strongly influence the design of the field optics systems which couple the incoming flux to the radiation sensors (cold bolometers). The Airy diffraction disk for a typical telescope at submillimeter wavelengths approx 100 microns-1000 microns is many millimeters in diameter; the size of the field stop must be comparable. The dilute radiation at the stop is fed through a Winston nonimaging concentrator to a small cavity containing the bolometer. The purpose of this paper is to review the principles and techniques of infrared field optics systems, including spectral filters, concentrators, cavities, and bolometers (as optical elements), with emphasis on photometric systems for wavelengths longer than 60 microns.

Hildebrand, R. H.↗
NASA NTRS1986

Diffraction-limited 10 microns imaging with 3 meter telescopes

An IR imaging system that achieves diffraction-limited spatial resolution (about 0.8 arcsec) at 10 microns on 3-meter ground-based telescopes. The system uses a linear array of sensitive HgCdTe photodiodes, scanned in the direction perpendicular to the array axis, to form two-dimensional images. Scans are completed rapidly enough to freeze atmospheric fluctuations. Individual detectors are small compared to the diameter of the Airy disk, and images are oversampled heavily in the scan direction. This method has a number of advantages for studying small fields with very high spatial resolution, and has been applied successfully to the problem of directly imaging faint circumstellar dust shells.

Bloemhof, E. E.↗