Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “adaptive damping controller”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Development of the Aquarius Antenna Deployment Mechanisms and Spring/Damper Actuator

The Aquarius Instrument s large radar reflector dish needed to be stowed for launch, and then deployed on-orbit. The Deployment Subsystem consisted of a cantilevered boom structure and two single-axis hinge mechanisms to accurately deploy and position the reflector dish relative to the radar feed horns. The cantilevered design demanded high stiffness and accuracy from the deployment mechanism at the root of the boom. A preload-generating end-of-travel latch was also required. To largely eliminate the need for control systems, each deployment mechanism was actuated by a passive spring motor with viscous-fluid damping. Tough requirements and adaptation of a heritage actuator to the new application resulted in numerous challenges. Fabrication, assembly, and testing encountered additional problems, though ultimately the system was demonstrated very successfully. This paper revisits the development to highlight which design concepts worked and the many important lessons learned.

Johnson, Joel A.↗
NASA NTRS1980

Atmospheric perturbation and control of a shuttle/tethered satellite

A simplified model of the strong atmospheric perturbation of a small satellite attached to the orbiter by a long, rigid tether predicts undesirable uncontrolled libration motions similar to those from sophisticated models. The simplified model is used to compare performance limitations of two simple control systems that rely only on tether tension for three-dimensional control. Because the effects on libration of both the changing kinematic and atmospheric drag torques caused by changing length are largely predictable, the controller that models these changes has substantially better performance. In particular, the altitude variation of the tethered satellite above an oblate earth can be controlled substantially better with a controller that uses a length command adapted to these predictable changes than one that only reacts to tension changes. Also, small amplitude out-of-plane librations, that are coupled only to second-order with changing length, can be damped substantially faster by the controller that periodically commands properly phased length changes than by the controller that only reacts to the second-order changes in tension.

Spencer, T. M.↗
NASA NTRS1983

Experimental implementation of parameter adaptive control on a free-free beam

A method for identifying modal parameters has been integrated with a modal control scheme and implemented on an experimental beam at the NASA Langley Research Center. This work is the culmination of several studies to develop adaptive control schemes for large flexible spacecraft. The identification scheme is an equation-error technique which generates modal frequency and damping estimates on-line from a set of distributed displacement measurements. The control law is a modal pole placement technique with the objective of vibration suppression. Integration of the identification and control schemes is achieved through a series of tests which validate the identified parameters before they are used for control gain updating. Results using a low order controller show that control gains can be updated in real time based on the validated parameters to improve the performance of the closed loop system. Important factors in the implementation are the test criterion and the a priori assumption of mode shapes.

Williams, J. P.↗
NASA NTRS1990

Adaptive-Control Experiments On A Large Flexible Structure

Antennalike flexible structure built for research in advanced technology including suppression of vibrations and control of initial deflections. Structure instrumented with sensors and actuators connected to digital electronic control system, programmed with control algorithms to be tested. Particular attention in this research focused on direct model-reference adaptive-control algorithm based on command generator tracker theory. Built to exhibit multiple vibrational modes, low modal frequencies, and low structural damping. Made three-dimensional so complicated interactions among components of structure and control system investigated.

Ih, Che-Hang C.↗
NASA NTRS1961

Design and Flight Tests of an Adaptive Control System Employing Normal-Acceleration Command

An adaptive control system employing normal-acceleration command has been designed with the aid of an analog computer and has been flight tested. The design of the system was based on the concept of using a mathematical model in combination with a high gain and a limiter. The study was undertaken to investigate the application of a system of this type to the task of maintaining nearly constant dynamic longitudinal response of a piloted airplane over the flight envelope without relying on air data measurements for gain adjustment. The range of flight conditions investigated was between Mach numbers of 0.36 and 1.15 and altitudes of 10,000 and 40,000 feet. The final adaptive system configuration was derived from analog computer tests, in which the physical airplane control system and much of the control circuitry were included in the loop. The method employed to generate the feedback signals resulted in a model whose characteristics varied somewhat with changes in flight condition. Flight results showed that the system limited the variation in longitudinal natural frequency of the adaptive airplane to about half that of the basic airplane and that, for the subsonic cases, the damping ratio was maintained between 0.56 and 0.69. The system also automatically compensated for the transonic trim change. Objectionable features of the system were an exaggerated sensitivity of pitch attitude to gust disturbances, abnormally large pitch attitude response for a given pilot input at low speeds, and an initial delay in normal-acceleration response to pilot control at all flight conditions. The adaptive system chatter of +/-0.05 to +/-0.10 of elevon at about 9 cycles per second (resulting in a maximum airplane normal-acceleration response of from +/-0.025 g to +/- 0.035 g) was considered by the pilots to be mildly objectionable but tolerable.

McNeill, Water E.↗
NASA NTRS1986

Nonlinear attitude control of flexible spacecraft under disturbance torque

A control law for large-angle single-axis rotational maneuvers of a spacecraft-beam-tip body (an antenna or a reflector) configuration is presented. It is assumed that an unknown but bounded disturbance torque is acting on the spacecraft. A model reference adaptive torque control law is derived for the slewing of the space vehicle. This controller includes a dynamic system in the feedback path and requires only attitude angle and rate of the space vehicle for feedback. For damping out the elastic motion excited by the slewing maneuver, a stabilizer is designed assuming that a torquer and a force actuator are available at the tip body. The stabilizer uses only the flexible modes for the synthesis of the control law. Simulation results are presented to show that fast, large-angle rotational maneuvers can be performed using the adaptive controller and the stabilizer in spite of the presence of continuously acting unknown torque on the spacecraft.

Singh, Sahjendra N.↗
NASA NTRS1982

Simulation and testing of digital control on a flexible beam

Large space structures are expected to have control problems due to low stiffness and damping, and control laws for these structures must deal with shape and configuration control as well as attitude and orbit maintenance. In general, these control tasks must be accomplished without adversely interacting with the lightly damped and low frequency vibration modes of the structure. Modal control schemes have been proposed to deal with these problems. A discrete time parameter adaptive control scheme which uses modal control has been proposed by Montgomery and Johnson (1978). In the present investigation the method considered by Montgomery and Johnson is applied to a homogeneous free-free beam in both numerical simulation and laboratory experimentation. Mathematical modeling of the beam is treated in a manner expedient for digital simulation and control implementation.

Williams, J. P.↗
NASA NTRS1992

Active structural control for damping augmentation and compensation of thermal distortion

A large space-based Focus Mission Interferometer is used as a testbed for the NASA Controls and Structures Interaction Program. Impedance-based adaptive structural control and control of thermal disturbances are demonstrated using an end-to-end simulation of the system's optical performance. Attention is also given to integrated optical/structural modeling and a hierarchical, layered control strategy.

Sirlin, S. W.↗
NASA NTRS1991

Experiments In Multivariable Adaptive Control Of A Flexible Structure

Report describes experiments in use of six-input/six-output multivariable adaptive control system to suppress vibrations in complicated flexible structure. Represents significant upgrade relative to two-input/two-output system, yielding significant improvement in spatial controllability and effective damping of largest set of modes. Structure exhibits low modal frequencies and complicated dynamics like those of large structures in outer space. Conclusions drawn from research relevant to such applications as active suppression of wind and earthquake vibrations in tall buildings and other large terrestrial structures.

Ih, Che-Hang C.↗
NASA NTRS2019

Suppression of Nonlinear Rotary Slosh Dynamics Using the SLS Adaptive Augmenting Control System Demonstration on a Quadcopter Testbed

Liquid propellant makes up a significant portion of the total weight for large launch vehicles such as Saturn V, Space Shuttle, and the Space Launch System. Careful attention must be given to the influence of fuel slosh motion on the stability of the vehicle in the design of the Flight Control System (FCS). Historically, there have been instances where a poorly designed FCS in addition to a lack of passive damping have caused the slosh mass to drive the launch vehicle unstable. The dynamics behind controlling a quadcopter/hanging mass configuration is analogous to that of controlling the attitude of a rocket with a single propellant tank. The quadcopter/hanging mass configuration offers a reasonably accurate platform for assessing the real-time effectiveness of the SLS Adaptive Augmenting Controller in suppressing slosh instability. Flight test experiments were carried out at the NASA Langley Research Center's Autonomy Incubator. During both simulation and flight test, the hanging mass was intentionally made unstable and the adaptive algorithm successfully suppressed the instability as expected.

Pei, Jing↗
NASA NTRS1985

Advances and trends in structures and dynamics; Proceedings of the Symposium, Washington, DC, October 22-25, 1984

Among the topics discussed are developments in structural engineering hardware and software, computation for fracture mechanics, trends in numerical analysis and parallel algorithms, mechanics of materials, advances in finite element methods, composite materials and structures, determinations of random motion and dynamic response, optimization theory, automotive tire modeling methods and contact problems, the damping and control of aircraft structures, and advanced structural applications. Specific topics covered include structural design expert systems, the evaluation of finite element system architectures, systolic arrays for finite element analyses, nonlinear finite element computations, hierarchical boundary elements, adaptive substructuring techniques in elastoplastic finite element analyses, automatic tracking of crack propagation, a theory of rate-dependent plasticity, the torsional stability of nonlinear eccentric structures, a computation method for fluid-structure interaction, the seismic analysis of three-dimensional soil-structure interaction, a stress analysis for a composite sandwich panel, toughness criterion identification for unidirectional composite laminates, the modeling of submerged cable dynamics, and damping synthesis for flexible spacecraft structures.

Noor, A. K.↗
NASA NTRS1988

Model reference, sliding mode adaptive control for flexible structures

A decentralized model reference adaptive approach using a variable-structure sliding model control has been developed for the vibration suppression of large flexible structures. Local models are derived based upon the desired damping and response time in a model-following scheme, and variable structure controllers are then designed which employ colocated angular rate and position feedback. Numerical simulations have been performed using NASA's flexible grid experimental apparatus.

Yurkovich, S.↗
NASA NTRS1983

Active control of a flexible beam

Because of inherent low damping and high flexibility, large space structures may require some form of active control of their dynamics. Because of the apparent inability to accurately model the dynamics of these structures, methods for parameter adaptive control are now being developed at Langley. This approach uses a digital computer to process discrete sensor data, identify modal parameters, calculate modal control gains, and then convert the modal forces to real forces. Some of the problems considered are: (1) the possibility that there may be modes to control with limited amounts of hardware, and (2) the required accuracy of identified structural parameters.

Williams, J. P.↗
NASA NTRS1970

High pressure flow-rate switch

Flow-rate switch adjusts easily over a wide switching range and operates uniformly over many cycles. It adapts easily to control of various fluids and has the possibility of introducing multi-point switching. Novel design features include the tapered spool, balanced porting, capillary-bypass lubrication, and capillary-restriction damping.

Gale, G. P.↗
NASA NTRS1989

Residual mode filters and adaptive control in large space structures

One of the most difficult problems in controlling large systems and structures is compensating for the destructive interaction which can occur between the reduced-order model (ROM) of the plant, which is used by the controller, and the unmodeled dynamics of the plant, often called the residual modes. The problem is more significant in the case of large space structures because their naturally light damping and high performance requirements lead to more frequent, destructive residual mode interaction (RMI). Using the design/compensation technique of residual mode filters (RMF's), effective compensation of RMI can be accomplished in a straightforward manner when using linear controllers. The use of RMF's has been shown to be effective for a variety of large structures, including a space-based laser and infinite dimensional systems. However, the dynamics of space structures is often uncertain and may even change over time due to on-orbit erosion from space debris and corrosive chemicals in the upper atmosphere. In this case, adaptive control can be extremely beneficial in meeting the performance requirements of the structure. Adaptive control for large structures is also based on ROM's and so destructive RMI may occur. Unfortunately, adaptive control is inherently nonlinear, and therefore the known results of RMF's cannot be applied. The purpose is to present the results of new research showing the effects of RMI when using adaptive control and the work which will hopefully lead to RMF compensation of this problem.

Davidson, Roger A.↗
NASA NTRS1993

Helicopter trim analysis by shooting and finite element methods with optimally damped Newton iterations

Helicopter trim settings of periodic initial state and control inputs are investigated for convergence of Newton iteration in computing the settings sequentially and in parallel. The trim analysis uses a shooting method and a weak version of two temporal finite element methods with displacement formulation and with mixed formulation of displacements and momenta. These three methods broadly represent two main approaches of trim analysis: adaptation of initial-value and finite element boundary-value codes to periodic boundary conditions, particularly for unstable and marginally stable systems. In each method, both the sequential and in-parallel schemes are used, and the resulting nonlinear algebraic equations are solved by damped Newton iteration with an optimally selected damping parameter. The impact of damped Newton iteration, including earlier-observed divergence problems in trim analysis, is demonstrated by the maximum condition number of the Jacobian matrices of the iterative scheme and by virtual elimination of divergence. The advantages of the in-parallel scheme over the conventional sequential scheme are also demonstrated.

Achar, N. S.↗
NASA NTRS1961

A Study of Longitudinal Control Problems at Low and Negative Damping and Stability with Emphasis on Effects of Motion Cues

As part of a general investigation to determine the effects of simulator motions on pilot opinion and task performance over a wide range of vehicle longitudinal dynamics, a cooperative NASA-AMAL program was conducted on the centrifuge at Johnsville, Pennsylvania. The test parameters and measurements for this program duplicated those of earlier studies made at Ames Research Center with a variable-stability airplane and with a pitch-roll chair flight simulator. Particular emphasis was placed on the minimum basic damping and stability the pilots would accept and on the minimum dynamics they considered controllable in the event of stability-augmentation system failure. Results of the centrifuge-simulator program indicated that small positive damping was required by the pilots over most of the frequency range covered for configurations rated acceptable for emergency conditions only (e.g., failure of a pitch damper). It was shown that the pilot's tolerance for unstable dynamics was dependent primarily on the value of damping. For configurations rated acceptable for emergency operation only, the allowable instability and damping corresponded to a divergence time to double amplitude of about 1 second. Comparisons were made of centrifuge, pitch-chair and fixed-cockpit simulator tests with flight tests. Pilot ratings indicated that the effects of incomplete or spurious motion cues provided by these three modes of simulation were important only for high-frequency, lightly damped dynamics or unstable, moderately damped dynamics. The pitch- chair simulation, which provided accurate angular-acceleration cues to the pilot, compared most favorably with flight. For the centrifuge simulation, which furnished accurate normal accelerations but spurious pitching and longitudinal accelerations, there was a deterioration of pilots' opinion relative to flight results. Results of simulator studies with an analog pilot replacing the human pilot illustrated the adaptive capability of human pilots in coping with the wide range of vehicle dynamics and the control problems covered in this study. It was shown that pilot-response characteristics, deduced by the analog-pilot method, could be related to pilot opinion. Possible application of these results for predicting flight-control problems was illustrated by means of an example control-problem analysis. The results of a brief evaluation of a pencil-type side-arm controller in the centrifuge showed a considerable improvement in the pilots' ability to cope with high-frequency, low-damping dynamics, compared to results obtained with the center stick. This improvement with the pencil controller was attributed primarily to a marked reduction in the adverse effects of large and exaggerated pitching and longitudinal accelerations on pilot control precision.

Sadoff, Melvin↗
NASA NTRS1984

Rapid single-axis torque-bounded slewing of SCOLE configuration

The first general research objective was to address control design challenges of the Spacecraft Control Laboratory Experiment (SCOLE) via the two stage approach: (1) slew the whole as if it were a rigid body about one Space Shuttle body axis each time using the onboard Reaction Control System (RCS) thrusters; and (2) damp out excited vibrations. The second objective was to examine the feasibility of applying the approach to shuttle-attached flexible space structures. The following was accomplished: (1) a standard bang-bang control technique was adapted; (2) a slew rate limit was imposed in the design; and (3) slew acceleration deviation was defined as the index of slew performance degradation.

Lin, Jiguan Gene↗