Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Zero point energy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Low-temperature thermostatics of face-centered-cubic metallic hydrogen

The thermostatic properties of a high-symmetry phase of metallic hydrogen with atomic sphere radius between 0.1 and 1.5 bohr are studied, with special emphasis accorded to electronic screening and quantum proton motion. The electron-proton and proton-proton interactions receive a perturbation treatment based on the Singwi dielectric function, while the proton motion is handled by self-consistent harmonic approximation. Quantum behavior is found to be less pronounced than expected, and nuclear magnetism is absent. The phonon spectrum is, however, affected by screening and large proton motion. The zero-point vibrational energy and the superconducting critical temperature are below previous estimates. The crystalline-defect formation energies are a few times the Debye energy, which implies that defects contribute significantly to melting at the lower particle densities.

Caron, L. G.↗

Adsorption and recombination of hydrogen atoms on a model graphite surface

The adsorption and recombination of atomic hydrogen on a model graphite grain have been examined in a series of calculations in which a modified, iterative, extended Hueckel program was used. The hydrogen atom is found to be chemisorbed at a site with a zero-point binding energy of 0.7 eV and at an equilibrium distance of 2.25 A above the site. Despite a barrier of about 0.4 eV between adjacent sites, calculations suggest that at temperatures as low as 10 K, an H atom will tunnel through to adjacent sites in less than one nanosecond. However, a potential barrier to the recombination of two hydrogen atoms has been found which displays high sensitivity to the mutual arrangement of the two hydrogen atoms with respect to the graphite surface. Results show that at very low temperatures, recombinations can occur only by tunneling. Consistent with experiment, the region in which H2 begins to form exhibits a repulsive potential with respect to possible chemisorption of the incipient H2 entity.

Aronowitz, S.↗

The DESI DR1 Peculiar Velocity Survey: Global Zero-point and H 0 Constraints

The Dark Energy Spectroscopic Instrument (DESI) in its first Data Release (DR1) already provides more than 100,000 galaxies with relative distance measurements. The primary purpose of this paper is to perform the calibration of the zero-point for the DESI Fundamental Plane and Tully–Fisher relations, which allows us to measure the Hubble constant, H 0 . This sample has a lower statistical uncertainty than any previously used to measure H 0 , and we investigate the systematic uncertainties in absolute calibration that could limit the accuracy of that measurement. We improve upon the DESI Early Data Release Fundamental Plane H 0 measurement by (a) using a group catalog to increase the number of calibrator galaxies and (b) investigating alternative calibrators in the nearby Universe. Our baseline measurement calibrates to the SH0ES/Pantheon+ type Ia supernovae, and finds H 0 = 73.7 ± 0.06 (stat.) ± 1.1 (syst.) km s −1 Mpc −1 . Calibrating to surface brightness fluctuation distances yields a similar H 0 . We explore measurements using other calibrators, but these are currently less precise since the overlap with DESI peculiar velocity tracers is much smaller. In future data releases with an even larger peculiar velocity sample, we plan to calibrate directly to Cepheids and the tip of the red giant branch, which will enable the uncertainty to decrease towards a percent-level measurement of H 0 . This will provide an alternative to supernovae as the Hubble flow sample for H 0 measurements.

Carr, Anthony [Korea Astronomy and Space Science I↗

Reversal electron attachment ionizer for detection of trace species

An in-line reversal electron, high-current ionizer capable of focusing a beam of electrons to a reversal region and executing a reversal of the electrons, such that the electrons possess zero kinetic energy at the point of reversal, may be used to produce both negative and positive ions. A sample gas is introduced at the point of electron reversal for low energy electron-(sample gas) molecule attachment with high efficiency. The attachment process produces negative ions from the sample gas, which includes species present in trace (minute) amounts. These ions are extracted efficiently and directed to a mass analyzer where they may be detected and identified. The generation and detection of positive ions is accomplished in a similar fashion with minimal adjustment to potentials applied to the apparatus.

Bernius, Mark T.↗

Reversal electron attachment ionizer for detection of trace species

An in-line reversal electron, high-current ionizer capable of focusing a beam of electrons to a reversal region and executing a reversal of said electrons, such that the electrons possess zero kinetic energy at the point of reversal, may be used to produce both negative and positive ions. A sample gas is introduced at the point of electron reversal for low energy electron-(sample gas) molecule attachment with high efficiency. The attachment process produces negative ions from the sample gas, which includes species present in trace (minute) amounts. These ions are extracted efficiently and directed to a mass analyzer where they may be detected and identified. The generation and detection of positive ions is accomplished in a similar fashion with minimal adjustment to potentials applied to the apparatus.

Bernius, Mark T.↗

Pulsed, high-current, in-line reversal electron attachment detector

A new, pulsed, high-current, in-line reversal electron attachment ionizer/detector is described. The ionizer is capable of delivering a beam of electrons into an electrostatic mirror field to form a planar wall of electrons having zero kinetic energy. Electron attachment to a molecular target at the reversal point produces either parent or fragment negative ions through a zero-energy (s-wave) state. The atomic or molecular ion is pulsed out of the attachment region approximately 2 microsec after the electrons are pulsed off, and focused onto the entrance plane of a quadrupole mass analyzer. The sensitivity of the apparatus is preliminarily assessed, and its higher-energy behavior with regard to molecular attachment and ionization is described.

Bernius, Mark T.↗

Negative-ion formation in the explosives RDX, PETN, and TNT using the Reversal Electron Attachment Detection (READ) technique

In the search for high sensitivity and direct atmospheric sampling of trace species, techniques have been developed such as atmospheric-sampling, glow-discharge ionization (ASGDI), corona discharge, atmospheric pressure ionization (API), electron-capture detection (ECD), and negative-ion chemical ionization (NICI) that are capable of detecting parts-per-billion to parts-per-trillion concentrations of trace species. These techniques are based on positive- or negative-ion formation via charge-transfer to the target, or electron capture under multiple-collision conditions in a Maxwellian distribution of electron energies at the source temperature. One drawback of the high-pressure, corona- or glow-discharge devices is that they are susceptible to interferences either through indistinguishable product masses, or through undesired ion-molecule reactions. The ASGDI technique is relatively immune from such interferences, since at target concentrations of less than 1 ppm the majority of negative ions arises via electron capture rather than through ion-molecule chemistry. A drawback of the conventional ECD, and possibly of the ASGDI, is that they exhibit vanishingly small densities of electrons with energies in the range 0-10 millielectron volts (meV), as can be seen from a typical Maxwellian electron energy distribution function at T = 300 K. Slowing the electrons to these subthermal (less than 10 meV) energies is crucial, since the cross section for attachment of several large classes of molecules is known to increase to values larger than 10(exp -12) sq cm at near-zero electron energies. In the limit of zero energy these cross sections are predicted to diverge as epsilon(exp -1/2), where epsilon is the electron energy. In order to provide a better 'match' between the electron energy distribution function and attachment cross section, a new concept of attachment in an electrostatic mirror was developed. In this scheme, electrons are brought to a momentary halt by reversing their direction with electrostatic fields. At this turning point the electrons have zero or near-zero energy. A beam of target molecules is introduced, and the resultant negative ions extracted. This basic idea has been recently improved to allow for better reversal geometry, higher electron currents, lower backgrounds, and increased negative-ion extraction efficiency. We present herein application of the so-called reversal electron attachment detector (READ) to the study of negative-ion formation in the explosives molecules RDX, PETN, and TNT under single-collision conditions.

Chutijian, Ara↗

Chirality reversal at finite magnetic impurity strength and local signatures of a topological phase transition

Here, we study the honeycomb lattice with a single magnetic impurity modeled by adding imaginary next-nearest-neighbor hopping 𝑖⁢ℎ on a single hexagon. This Haldane defect gives a topological mass term to the gapless Dirac cones and generates chirality. For a small density of defects, Neehus et al. [Phys. Rev. Lett. 135, 126604 (2025)] found that the system's chirality reverses at a critical ℎ 𝑐 ≈ 0.95 associated with an unexpected tricritical point of Dirac fermions at zero defect density. We investigate this zero-density limit by analyzing a single defect and computing two experimentally relevant measures of chirality: (1) orbital magnetization via local Chern marker, a bulk probe of all occupied states; and (2) electronic currents of low-energy states. Both probes show a chirality reversal at a critical ℎ 𝑐 ≈ 0.9–1.0. Motivated by this consistency, we propose a defect-scale toy model whose low-energy states reverse their chirality at ℎ$^{'}_{c}$ ≈ 0.87. Remarkably, the same pair of zero-energy bound states also generates the critical point ℎ 𝑐 in the full impurity projected T-matrix. Our results show how the chirality reversal produced by an impurity can be observed either in local probes or in the global topology, and suggest a possible role of the microscopic defect structure at the critical point.

Chern insulators↗

Thermal Expansion from Stochastic Nonlinear Acoustic Fields

The methods of stochastic mechanics are applied to nonlinear acoustic fields generated by random acoustic radiation sources associated with oscillating lattice sites in nonlinear lattices. The assumption of stochastically independent zero-point and temperature-dependent acoustic fields leads to expressions of the thermodynamic internal and Helmholtz free energies per unit mass in terms of modal energies per unit mass that account for the nonlinearity of the propagation modes. The thermodynamic state functions canonically transform to the familiar results of a system of quantized, simple harmonic oscillators in the linear field limit. The thermal expansion coefficient, derived from the Helmholtz free energy per unit mass, is obtained as a sum of the zero-point modal nonlinearity parameters, weighted by temperature-dependent, modal heat capacities. The relationship is fully anharmonic, in contrast to commonly used quasi-harmonic models, and predicts with excellent agreement the experimentally observed null thermal expansion of vitreous silica at the ‘cross-over’ temperature corresponding to the balance between long wavelength modes that contribute negative nonlinearity parameters to the modal sum and short wavelength modes that contribute positive nonlinearity parameters.

Cantrell, John H., Jr.↗

Anharmonic phonons, thermal expansion, and nuclear quantum effects in Zn

The anharmonic behavior of phonons and thermal expansion of hexagonal zinc were studied from 15 to 690 K by inelastic neutron scattering (INS) and ab initio simulations. Phonon spectra were measured for Q-points covering the full Brillouin zone, giving the phonon density of states (DOS) and dispersions along high-symmetry directions. The dispersions were sharp at 15 K, but diffuse intensity was observed at energies above them. The dispersions broadened with temperature T and the diffuse intensity became stronger. This diffuse intensity appeared in all INS measurements and simulations, except for classical molecular dynamics at 15 K. The temperature-dependent effective potential (TDEP) method, which included the nuclear quantum effect from zero-point vibrational dynamics, was used to calculate the free energy and thermal expansion. For T < 100 K nuclear quantum effects were important for obtaining the correct negative thermal expansion, and path integral molecular dynamics (PIMD) was particularly effective for obtaining the negative thermal expansion in the basal plane. A Heisenberg-Langevin model for interacting phonons coupled to a thermal bath was able to reproduce the shape and intensity of the diffuse spectral features.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

GridSTIX

SF-25-112 Grid-STIX is a comprehensive extension of the STIX (Structured Threat Information Expression) 2.1 ontology specifically designed for electrical grid cybersecurity applications. This ontology provides a standardized, machine-readable framework for modeling grid assets, operational technology devices, threats, vulnerabilities, supply chain risks, and security relationships in electrical power systems. ## Key Features - **Comprehensive Grid Coverage**: Physical assets, OT devices, grid components, sensors, and energy storage systems - **Zero Trust Architecture**: Policy decision points, enforcement points, trust brokers, and continuous monitoring - **AMI Infrastructure**: Advanced metering networks, head-end systems, mesh gateways, and MDM systems - **Advanced Security Modeling**: Attack patterns, vulnerabilities, mitigations, and supply chain risks - **Critical Grid Relationships**: Power flow, protection, control, and synchronization relationships - **Supply Chain Security**: Supplier modeling, country of origin tracking, and risk assessment - **Protocol Support**: DNP3, Modbus, IEC 61850, IEC 60870-5-104, OPC-UA, and IEEE standards - **Python Code Generation**: Automated STIX-compliant Python class generation from ontologies - **Interactive Visualization**: Enhanced HTML network graphs with grid-specific categorization - **STIX 2.1 Compliance**: Full compatibility with STIX threat intelligence ecosystem

Blakely, Benjamin [Argonne National Laboratory (AN↗

Exotic edge states of C 3 high-fold fermions in honeycomb lattices

A generalization of the graphene honeycomb model to the case where each site in the honeycomb lattice contains a n -fold degenerate set of eigenstates of the C 3 symmetry has been recently proposed to describe several systems, including triangulene crystals and photonic lattices. These generalized honeycomb models are defined by ( n a , n b ) , the number of C 3 eigenstates in the a and b sites of the unit cell, resulting in n a + n b bands. Thus, the (1,1) case gives the coventional honeycomb model that describes the two low-energy bands in graphene. Generalizations, such as (2,1), (2,2), and (3,3) display several nontrivial features, such as coexisting graphenelike Dirac cones with flat bands, both at zero and finite energy, as well as robust degeneracy points where a flat band and a parabolic band meet at the Γ point. Here we explore the edge states of this class of crystals, using as reference triangulene crystals, and we find several types of edge states absent in the conventional (1,1) honeycomb case, associated to the nontrivial features of the two-dimensional bands of the high-fold case. First, we find dispersive edge states associated to the finite-energy flat bands, that occur both at the armchair and zigzag termination. Second, in the case of noncentrosymmetric triangulene crystals that lead to a S = 1 Dirac band, we have a bonding-antibonding pair of dispersive edge states, localized in the same edge so that their energy splitting is reduced as their localization increases, opposite to the conventional behavior of pairs of states localized in opposite edges. Third, for the (3,3) case, that hosts a gap separating a pair of flat conduction and valence bands, we find nondispersive edge states with E = 0 in all edge terminations. Published by the American Physical Society 2024

Madail, L. (ORCID:0000000208457748)↗

Optical model calculations of heavy-ion target fragmentation

The fragmentation of target nuclei by relativistic protons and heavy ions is described within the context of a simple abrasion-ablation-final-state interaction model. Abrasion is described by a quantum mechanical formalism utilizing an optical model potential approximation. Nuclear charge distributions of the excited prefragments are calculated by both a hypergeometric distribution and a method based upon the zero-point oscillations of the giant dipole resonance. Excitation energies are estimated from the excess surface energy resulting from the abrasion process and the additional energy deposited by frictional spectator interactions of the abraded nucleons. The ablation probabilities are obtained from the EVA-3 computer program. Isotope production cross sections for the spallation of copper targets by relativistic protons and for the fragmenting of carbon targets by relativistic carbon, neon, and iron projectiles are calculated and compared with available experimental data.

Townsend, L. W.↗

An abrasion-ablation model description of galactic heavy-ion fragmentation

The fragmentation of high-energy galactic heavy ions by nuclear interactions with arbitrary target nuclei is described within the context of a simple abrasion-ablation fragmentation model. The abrasion part of the theory utilizes a quantum-mechanical formalism based upon an optical model potential approximation to the exact nucleus-nucleus multiple-scattering series. Nuclear charge distributions of the excited prefragments are calculated using either a hypergeometric distribution or a method based upon the zero-point oscillations of the giant dipole resonance. The excitation energy of the prefragment is estimated from the geometric clean-cut abrasion-ablation model. The decay probabilities for the various particle emission channels, in the ablation stage of the fragmentation, are obtained from the EVAP-4 Monte Carlo computer program. Elemental production cross sections for 1.88-GeV/nucleon iron colliding with carbon, silver, and lead targets are calculated and compared with experimental data and with the predictions from the semiempirical relations of Silberberg and Tsao.

Townsend, L. W.↗

Gallery of soft modes: Theory and experiment at a ferromagnetic quantum phase transition

We examine the low-energy excitations in the vicinity of the quantum critical point in LiHoF4, a physical realization of the Transverse Field Ising Model, focusing on the long-range fluctuations which soften to zero energy at the ferromagnetic quantum phase transition. Microwave spectroscopy in tunable loop-gap resonator structures identifies and characterizes the electronuclear soft mode and higher-energy electronuclear states as a function of frequency and magnetic fields applied transverse and parallel to the Ising axis. These are understood in the context of a theoretical model of a soft electronuclear mode that interacts with soft photons as well as soft phonons. We identify competing infrared divergences at the quantum critical point, coming from the photons and the electronuclear soft mode. It is an incomplete cancellation of these divergences that leads to the muted but distinct signatures observed in the experiments. The application of a longitudinal magnetic field gaps the soft mode. As a result, measurements well away from the quantum critical point reveal a set of "Walker'' modes associated with ferromagnetic domain dynamics.

Dipolar interaction↗

Semi-classical Reissner-Nordstrom model for the structure of charged leptons

The lepton self-mass problem is examined within the framework of the quantum theory of electromagnetism and gravity. Consideration is given to the Reissner-Nordstrom solution to the Einstein-Maxwell classical field equations for an electrically charged mass point, and the WKB theory for a semiclassical system with total energy zero is used to obtain an expression for the Einstein-Maxwell action factor. The condition obtained is found to account for the observed mass values of the three charged leptons, and to be in agreement with the correspondence principle.

Rosen, G.↗

The Unitarity-Limit Expansion for Two Nucleons with Perturbative Pions: Digest and Ideas

Theorists love nontrivial fixed points. In the Unitarity Limit, the NN 𝑆-wave binding energies are zero, the scattering lengths infinite, Physics is universal, i.e. insensitive to details of the interactions, and observables display richer symmetries, namely invariance under both scaling and Wigner’s combined SU(4) transformation of spin and isospin. In “Pionless” EFT, both are explicitly but weakly broken and hence perturbative in the Unitarity Window (phase shifts 45° ≲ δ(k) ≲ 135°, i.e. momenta k≈mπ). This Unitarity Expansion provides strong hints that Nuclear Physics resides indeed in a sweet spot: bound weakly enough to be insensitive to the details of the nuclear interaction; and therefore interacting strongly enough that the NN scattering lengths are perturbatively close to the Unitarity Limit. In this paradigm change, NN details are less important than NNN interactions to explain the complexity and patterns of the nuclear chart. This presentation is a digest of the first quantitative exploration of corrections to this picture when pions are included [1] (see there for a more comprehensive list of references). Since the pion mass and decay constant introduce dimensionful scales in the NN system, they explicitly break the symmetries of the Unitarity fixed point. In χEFT, these symmetries must therefore be hidden and instead be classified as emergent.

Griesshammer, Harald W. [The George Washington Uni↗

Comparing net zero pathways across the Atlantic A model inter-comparison exercise between the Energy Modeling Forum 37 and the European Climate and Energy Modeling Forum

Europe and North America account for 32 % of current carbon emissions. Due to distinct legacy systems, energy infrastructure, socioeconomic development, and energy resource endowment, both regions have different policy and technological pathways to reach net zero by the mid-century. Against this background, our paper examines the results from the net zero emission scenarios for Europe and North America that emerged from the collaboration of the European and American Energy Modeling Forums. Here, in our analysis, we perform an inter-comparison of various integrated assessments and bottom-up energy system models. A clear qualitative consensus emerges on five main points. First, Europe and the United States reach net zero targets with electrification, demand-side reductions, and carbon capture and sequestration technologies. Second, the use of carbon capture and sequestration is more predominant in the United States due to a steeper decarbonization schedule. Third, the buildings sector is the easiest to electrify in both regions. Fourth, the industrial sector is the hardest to electrify in the United States and transportation in Europe. Fifth, in both regions, the transition in the energy mix is driven by the substitution of coal and natural gas with solar and wind, but to a different extent.

100 % renewables↗