Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Wurtzite”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Nitrogen Vacancies Induce Fatigue in Ferroelectric Al 0.93 B 0.07 N

Wurtzite ferroelectrics (e.g., Al 0.93 B 0.07 N) are being explored for high-temperature and emerging near-, or in-compute, memory architectures due to the material advantages offered by their large remanent polarization and robust chemical stability. Despite these advantages, current Al0.93B0.07N devices do not have sufficient endurance lifetime to meet roadmap targets. To identify the defects responsible for this limited endurance, a combination of electronic measurements and optical spectroscopies characterized the evolution of defect states within Al 0.93 B 0.07 N with cycling. Ultrathin (∼10 nm) metal contacts were used to optically probe regions subject to ferroelectric switching; photoluminescence spectroscopy identified the emergence of a transition near 2.1 eV whose intensity scaled with the non-switching polarization quantified via positive-up negative-down (PUND) measurements. Accompanying thermally stimulated depolarization current (TSDC) and modulus spectroscopy measurements also observed the strengthening of a state near 2.1 eV. The origin of this feature is ascribed to transitions between a nitrogen vacancy and another defect deeper in the bandgap. Recognizing that the impurity concentration is largely fixed, strengthening of this transition indicates an increase in the number of nitrogen vacancies. Switching, therefore, creates vacancies in Al 0.93 B 0.07 N likely due to hot-atom damage induced by the aggressive fields necessary to switch wurtzite materials that ultimately limits endurance.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Influence of excess silicon on polytype selection during metal-mediated epitaxy of GaN nanowires

For this work, we have examined the origins of polytype selection during metal-mediated molecular-beam epitaxy of GaN nanowires (NWs). High-angle annular dark-field scanning transmission electron microscopy reveals [111]-oriented zinc blende (ZB) NWs and [0001]-oriented wurtzite (WZ) NWs, with SixNy at the interface between individual NWs and the Si (001) substrate. Quantitative energy dispersive x-ray spectroscopy reveals a notably higher Si concentration of 7.0% ± 2.3% in zinc blende (ZB) NWs than 2.3% ± 1.2% in wurtzite (WZ) NWs. Meanwhile, density functional theory calculations show that incorporation of 8 at. % Si on the Ga sublattice inverts the difference in formation energies between WZ and ZB GaN, such that the ZB polytype of GaN is stabilized. This identification of Si and other ZB polytype stabilizers will enable the development of polytype heterostructures in a wide variety of WZ-preferring compounds.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Combinatorial investigation of the Mn–Ge–N chemical system containing ternary nitrides Mn 3 GeN and MnGeN 2

By changing nitrogen chemical potential during synthesis of Mn–Ge–N ternary nitrides, both wurtzite MnGeN 2 and antiperovskite Mn 3 GeN ternary phases are prepared. Antiperovskite films are optically opaque and conductive, while wurtzite films with Mn/(Mn + Ge) ≤ 0.5 transmit light above ~ 2 eV. Alloys of Mn 3 GeN with Si and Al are also investigated. Mn 3 (Ge 1−x Al x )N alloys with 0.07 ≤ x ≤ 0.16 exhibit a cubic (rather than tetragonal) structure. Mn 3 (Ge 1−x Si x )N with x ≤ 0.05 maintains the tetragonal structure but becomes cubic when x > 0.05. This study shows that care must be taken in the synthesis of Mn–Ge–N and similar nitrides, especially when materials are integrated into devices not amenable to structural and chemical probing.

36 MATERIALS SCIENCE↗
NASA NTRS2003

Transport Equations for CAD Modeling of Al(x)Ga(1-x)N/GaN HEMTs

BEMTs formed from Al(x)Ga(1-x)N/GaN heterostructures are being investigated for high RF power and efficiency around the world by many groups, both academic and industrial. In these devices, the 2DEG formation is dominated by both spontaneous and piezoelectric polarization fields, with each component having nearly the same order of magnitude. The piezoelectric portion is induced by the mechanical strain in the structure, and to analyze these devices, one must incorporate the stress/strain relationships, along with the standard semiconductor transport equations. These equations for Wurtzite GaN are not easily found in the open literature, hence this paper summarizes them, along with the constitutive equations for piezoelectric materials. The equations are cast into the format for the Wurtzite crystal class, which is the most common way GaN is grown epitaxially.

Freeman, Jon C.↗
DOE OSTI2025

Ferroelectric epitaxial Al(Sc/B)N/Mo/SiC heterostructures for high operating temperature devices

Advances in wurtzite nitride ferroelectrics of Al 1-x M x N (⁠ M = Sc or B) have led to novel capabilities, which must be integrated into existing fabrication processes. In the case of electronics operating > 200°C, a movement toward SiC-based platforms enables better performance over conventional Si, primarily due to the higher bandgap and lower intrinsic carrier concentration of SiC. Hence, the challenge is to develop a deposition process to integrate Al 1-x M x M x N ferroelectrics with elevated temperature-compatible materials for high temperature electronics such as the non-volatile memory component. We demonstrate epitaxial Al M N/Mo/SiC heterostructures, which provides both the crystalline and surface features that promote high-quality ferroelectric nitride film growth. Omega scans of the Mo (110) reflection exhibit a full width at half max of < 0.02° (40 arc sec) and the (0002) peak of the subsequently grown nitride film had a value of 1.1° for 160 nm thick Al 0.7 Sc 0.3 N and 1.3° for 400 nm thick Al 0.94 B 0.06 N. The crystallographic relationships found between the Al M N, Mo, and SiC layers indicate an advancement in sputter deposition of epitaxial films. Ferroelectric switching is also shown at 400 °C in both samples via polarization-electric field hysteresis and pulsed measurements, which exhibited P r values >100 μC cm -2 and E c between 3 and 4 M V cm -1 ⁠, despite a large presence of oxygen in both Al M N films ranging between 4 and 5 at.%, revealed by compositional analysis. This study demonstrates the process for synthesizing high-crystal quality ferroelectric nitride films, which can be used in extremely high temperature applications.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2026

Revealing the Defect‐Driven Ferroelectric Mechanisms of Aluminum Nitride

Wurtzite III-nitride compounds are CMOS-compatible with widespread industrial interest to exercise ferroelectricity, despite their polar structure being highly resistant to polarization reversal. Here, we induce and tune ferroelectric properties in w-AlN via direct-write ion-beam processing, using nanoscale patterned defect engineering as a post-growth alternative to conventional cation substitution. Nanometric piezoresponse spectroscopy of the focused He + beam patterned defect concentrations in ferroelectric Al 0.92 B 0.08 N measures a localized 10x enhancement in effective piezoresponse and 40% reduction in switching barrier. The irradiation-induced point defects convert piezoelectric AlN into a ferroelectric system with site-saturated nucleation and raise the dielectric susceptibility, switched polarization, and effective piezoelectric coefficient. Enhanced defect-lattice interactions in AlN increase carrier conduction and phonon scattering loss but preserve long-range crystallinity. Here, based on atomistic analysis of nudged elastic band density functional theory calculations and reactive force field simulations, both nitrogen vacancies and defect complexes disrupt bond ordering, facilitating a line-by-line low-barrier switching of pristine AlN.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Electronic Properties of Ultra‐Wide Bandgap B x Al 1− x N Computed from First‐Principles Simulations

Abstract Ultra‐wide bandgap (UWBG) materials such as AlN and BN hold great promise for future power electronics due to their exceptional properties. They exhibit large bandgaps, high breakdown fields, high thermal conductivity, and high mechanical strengths. AlN and BN have been extensively researched, however, their alloys, B x Al 1− x N, are much less studied despite their ability to offer tunable properties by adjusting x . In this article, the electronic properties of 17 recently predicted ground states of B x Al 1− x N in the x = 0 − 1 range are predicted using first‐principles density functional theory and many‐body perturbation theory within GW approximation. All the B x Al 1− x N structures are found to be UWBG materials and have bandgaps that vary linearly from that of wurtzite‐phase ( w ) AlN (6.19 eV) to that of w ‐BN (7.47 eV). The bandstructures of B x Al 1− x N show that a direct‐to‐indirect bandgap crossover occurs near x = 0.25. Furthermore, it is found that B x Al 1− x N alloys have much larger dielectric constants than the constituent bulk materials (AlN = 9.3 ɛ 0 or BN = 7.3 ɛ 0 ), with values reaching as high as 12.1 ɛ 0 . These alloys are found to exhibit large dielectric breakdown fields in the range 9–35 MV cm −1 with a linear dependence on x . This work provides the much needed advancement in the understanding of the properties of B x Al 1− x N to aid their application in next‐generation devices.

Milne, Cody L.↗
DOE OSTI2025

Monocrystalline CdSeTe/MgCdTe Double‐Heterostructure Solar Cells

This article reports monocrystalline CdSeTe/MgCdTe double‐heterostructure (DH) solar cells with varying Se compositions in the absorber layers that are grown on InSb substrates by using molecular beam epitaxy. The Se composition in the samples studied is determined to be 4%–11% through high‐resolution X‐ray diffraction (XRD) and photoluminescence measurements. Increased Se incorporation induces higher defect density attributed to increased lattice mismatch, and mixed‐phase formation due to the small difference in formation energies between the wurtzite and zinc blende phases of CdSe, which causes stacking faults and grain boundaries. Devices are fabricated by directly depositing an n‐type indium tin oxide (ITO) layer on the CdSeTe/MgCdTe DHs followed by Ag metal contacts. Reduced bandgap is observed in solar cells with increased Se composition. The devices with an absorber containing 4% Se exhibit an average open‐circuit voltage ( V OC ) of 0.925 V, a short‐circuit current density ( J SC ) of 23.4 mA/cm 2 , a fill factor ( FF ) of 0.650 and an efficiency of 14.1% without anti‐reflection coating. Absorbers with higher Se compositions result in poor device performance, mainly attributed to high defect density in the materials.

Ju, Zheng [Center for Photonics Innovation Arizona↗
DOE OSTI2024

Atomic Layer Deposition of Nickel Using Ni(dmamb)2 and ZnO Adhesion Layer Without Plasma

Abstract In this study, a novel deposition technique that utilizes diethylzinc (C 4 H 10 ZnO) with H 2 O to form a ZnO adhesion layer was proposed. This technique was followed by the deposition of vaporized nickel(II) 1-dimethylamino-2-methyl-2-butoxide (Ni(dmamb) 2 ) and H 2 gas to facilitate the deposit of uniform layers of nickel on the ZnO adhesion layer using atomic layer deposition. Deposition temperatures ranged from 220 to 300 °C. Thickness, composition, and crystallographic structure results were analyzed using spectroscopic ellipsometry, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD), respectively. An average growth rate of approximately 0.0105 angstroms per cycle at 260 °C was observed via ellipsometry. Uniform deposition of ZnO with less than 1% of Ni was displayed by utilizing the elemental analysis function via SEM, thereby providing high-quality images. XPS revealed ionizations consistent with nickel and ZnO through the kinetic and binding energies of each detected electron. XRD provided supplemental information regarding the validity of ZnO by exhibiting crystalline attributes, revealing the presence of its hexagonal wurtzite structure.

Baker, Kaiya↗
DOE OSTI2026

Molecularly engineered ZnO–carbon nanosheets from fumaric acid precursors for efficient photocatalytic water purification

The photocatalytic breakdown of organic contaminants is crucial for the development of water purification technology. Zinc oxide (ZnO) is an extensively researched photocatalyst; however, its efficacy is hindered by rapid charge recombination and limited utilization of UV irradiation. Resolving these issues necessitates integrating ZnO with conductive carbon phases via scalable, low-temperature synthesis. We provide a molecularly designed sol–gel method that converts zinc–fumarate coordination networks into two-dimensional ZnO–carbon nanosheets utilizing solely aqueous precursors and mild annealing temperatures (400–600 °C). This method utilizes fumaric acid as a dicarboxylate linker and polyvinylpyrrolidone (PVP) as a structural carbon source to produce ultrathin wurtzite ZnO nanosheets embedded inside an amorphous carbon matrix. The resultant ZnO-C hybrid achieves nearly complete methylene blue degradation within 10 min under UV-A illumination, demonstrating first-order kinetics and outstanding recyclability. Compared with commercial ZnO, the ZnO–C nanosheets exhibit comparable rapid photocatalytic degradation, enhanced adsorption behavior, a porous nanosheet morphology, and an integrated ZnO–carbon interfacial structure. These findings provide a viable molecular-templating approach to fabricating various metal oxide–carbon photocatalysts and underscore substantial enhancements in semiconductor efficacy in eco-friendly water treatment systems.

Ozcan, Muca [ORNL] (ORCID:0000000320020474)↗
DOE OSTI2026

Optimization of Annealing for WZ-Phase Removal and Densification in Sb-Doped CdSexTe1-x Solar Cells

The impact of high temperature annealing (HTA) treatments on the performance of Sb-doped CdSeTe solar cells containing a CdSe0.25Te0.75/CdTe front stack and a vapor transport (VT) deposited CdTe:Sb absorber was studied. The HTA treatment of the thermally evaporated CdSe0.25Te0.75/CdTe front stack converts the mixed-phase film into a single zinc blende structure through recrystallization of the photo-inactive wurtzite phase. Subsequently, HTA treatment of the full device stack after vapor transport deposition of CdTe:Sb absorber promotes Se-Te intermixing, reduces voids, densifies the full stack and enhances CdTe:Sb grain growth. Comprehensive characterizations revealed that the combined HTA treatments significantly improved film crystallinity, removed the WZ phase in the front stack, enhanced full-stack densification, reduced defect densities, and enhanced carrier dynamics. With HTA treatments, the open-circuit voltage (VOC) of CdSeTe:Sb devices increased from ~ 400 mV to >= 600 mV, and when combined with optimized CdCl2 treatment, VOC reached 849 mV. The net carrier concentrations (NA-ND) of representative devices were NA-ND = 1.5 x 10^15, 1.1 x 10^15, and 3.5 x 10^14 cm-3 for the no-HTA, moderate-HTA, and optimized high-VOC conditions, respectively. Since the highest VOC corresponds to the lowest apparent NA-ND, , which is similar to a Cu-doped-only CdSeTe solar cell (NA-ND ~= 2 x 10^14 cm-3), the data indicate that improved device performance does not result from increased electrically active Sb; instead, it points to structural improvement as the dominant effect of HTA. The findings demonstrate the potential of HTA treatments to improve the structural and electrical properties of CdSeXTe1-X solar cells.

14 SOLAR ENERGY↗
DOE OSTI2025

Facet-Dependent Doping and Dopant-Dependent Faceting in Si-Doped GaAsSb Nanowires

Here, we correlate the spatial distributions of Si, Sb, and rotational twins in Si-doped GaAs 1-x Sb x nanowires. GaAs 1-x Sb x nanowires were grown epitaxially on Si(111) substrates by tuning process conditions to achieve repeated nucleation of rotational twins and growth along the [111]B direction; dilute Sb and Si fluxes were chosen to create a sufficient twin density to achieve high yield while avoiding growth of the wurtzite phase. While the impact of Si and Sb on twin density and nanowire growth rate has been previously reported, the facet-dependent incorporation of these species has not been established. Scanning transmission electron microscopy was used to confirm that Sb incorporates preferentially on the (111)B facets relative to {1 ̅1 ̅0} facets prior to nucleation of a rotational twin. With periodic twinning, this facet dependence leads to alternating regions of enriched and depleted Sb concentration attributed to a growth rate-dependent Sb-As-exchange mechanism. Atom probe tomography measurements establish that while Si doping is not perturbed by twinning on (111)B facets, Si and Sb concentrations are anti-correlated for growth on non-(111)B facets. Density functional theory calculations underpin a thermodynamic model that explains the observed anisotropies in dopant incorporation.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Synthesis of Solid-Solution Mn x Zn 1– x O Nanoparticles and their Electrochemical Oxidation of Furfural

Electrochemical valorization of biomass-derived substrates has become a prominent area of research due to its potential to produce value-added products from renewable feedstocks in a more sustainable way. First-row transition metal electrodes are compelling candidates for these conversions due to their stability, abundance, and cost-effectiveness. Herein, we report on the colloidal synthesis of Mn x Zn 1– x O (x = 0.3-0.7) nanoparticles and their electrocatalytic activity towards furfural oxidation. We find that the hindrance of a MnO impurity can be achieved by leveraging the oxidation state of the Mn precursor. The Mn x Zn 1– x O composition closely follows the ratio of precursors, with all the nanoparticles having a wurtzite structure as determined by ICP-MS and PXRD, respectively. XANES and XPS revealed the presence of Mn in different oxidation states with the ratio of these varying based on the composition. When comparing the electrocatalytic activity of the monometallic and bimetallic oxides for furfural oxidation, a decrease in current density was observed with increasing Zn content. We find the Mn x Zn 1– x O nanoparticles favor the formation of the 6 e - oxidation product 5-hydroxy-2(5H)-furanone, while both monometallic oxides primarily yield CO 2 and other deeply oxidized products as the majority pathway. Furthermore, these findings can contribute towards the design and synthesis of more active and selective electrocatalyst.

Aldehydes↗
DOE OSTI2025

Expanding Parameter Space to Enable Low-Temperature Synthesis of Crystalline Indium Phosphide Quantum Dots

Established methods to synthesize indium phosphide quantum dots (QDs) require high temperatures (>180 °C) to make high-quality material for optoelectronic applications. Nonpolar solvent environments are overwhelmingly used in InP QD synthesis to reach the necessary high temperatures and for compatibility with the reactive precursors. In this study, we explored InP QD synthesis in polar aprotic solvent environments to dramatically decrease the temperature required for InP crystallization by imparting ionicity to the precursors and stabilizing charged reaction intermediates. A custom air-free 96- well plate setup was employed to identify key factors impacting low-temperature QD formation, including an increased percentage of polar solvent, carboxylic acid choice, and inclusion of polar additives. Guided by these insights, we developed a synthesis of crystalline, green-emitting InP QDs at 60 °C in a toluene-dimethylformamide mixture. Here's, the QDs withstood established Zn 2+ and HF surface treatments, which increased the photoluminescence quantum yield to 25%. Additionally, we demonstrated the rapid synthesis of quasi-wurtzite InP QDs at room temperature in a polar solvent environment using an acid-free indium myristate precursor.

absorption↗
DOE OSTI2025

Alkali triel chalcogenide nanocrystals: a molecular reactivity approach to ternary phase selectivity

Alkali-metal-based materials are promising building blocks for energy conversion and storage technologies. Here, we use a molecular reactivity-based solution-phase approach to selectively synthesize multiple phases and specific polymorphs of lithium- and sodium-containing triel chalcogenide nanocrystals, LiTrCh 2 , NaTrCh 2 , and NaTr 3 Ch 5 , where Tr = Ga and In and Ch = S, Se, and Te. Analogous to the case of binary II–VI and III–V tetrahedral semiconductors, where the two commonly isolated zinc blende and wurtzite polymorphs are separated by only 1–50 meV f.u. −1 , we find that LiTrCh 2 nanocrystals easily adopt tetragonal (chalcopyrite) and orthorhombic polymorphs separated by only 2.7–6.2 meV f.u. −1 Because of this small energy difference, soft colloidal synthesis succeeds in accessing either one of these polymorphs, depending on the specific dichalcogenide precursor used. Highly reactive diethyl diselenide favors the thermodynamically more stable tetragonal I$\bar{4}2$d phase, whereas mildly reactive diphenyl diselenide favors the kinetic, metastable orthorhombic Pna2 1 phase. Density functional theory calculations confirm the relative energies among multiple LiTrCh 2 polymorphs and also model the observed powder X-ray diffraction pattern of a new C2 NaIn 3 Te 5 phase. 7 Li, 69 Ga, and 77 Se solid-state NMR spectra are consistent with phase-pure ternary LiGaSe 2 nanocrystals. A majority of the nanocrystal compositions are visible-light emitters. This work opens the door to new Li/Na-based ternary triel chalcogenide nanostructures for energy storage and conversion applications.

Pavel, Md Riad Sarkar [Iowa State Univ., Ames, IA ↗
DOE OSTI2026

Nitrogen p-type doping in polycrystalline zinc selenide telluride films

Nitrogen-doped zinc selenide telluride (N:ZnSe x Te 1−x ) is of interest because it is one of the widest-gap II–VI semiconductors that can still be doped p-type with reasonably high hole concentrations. We sputter deposit N:ZnSe x Te 1−x films, varying Se/(Se + Te), or x, from 0 to 0.7, N 2 flow rate from 0.25 to 0.75 sccm, and substrate temperature from 250 to 370 °C. Increasing x from 0 to 0.39 at the optimal temperature of 370 °C and N 2 flow rate of 0.5 sccm leads to 1.3 atomic % nitrogen incorporation and wurtzite phase stabilization. Such doping and alloying increases hole concentration from 3 × 10 18 cm −3 to 3 × 10 19 cm −3 , although mobility drops from 0.4 to 0.02 cm 2 V −1 s −1 . Our sputtered N:ZnSe 0.38 Te 0.62 has an absorption onset 0.1 eV greater than the ZnTe value of 1.87 eV. Increasing x from 0 to 0.51 enhances transmittance by moving absorption onset from 1.87 to 2.11 eV with diminished band gap bowing likely due to disorder, and increases the work function from 5.12 to 5.42 eV. This combination of tunable properties makes sputtered N:ZnSe x Te 1−x desirable for transparent p-type contacts in polycrystalline Cd(Se,Te) optoelectronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Structural characterization of highly alloyed (Al,Gd)N thin films

Highly alloyed (Al,Gd)N is of potential interest in a variety of applications, including neutron detection and in devices such as non-volatile memory. Gd has been shown to have very low equilibrium solubility in AlN at room temperature; however, non-equilibrium deposition techniques such as sputtering are able to deposit thin films, which incorporate large amounts of Gd. Here, we characterize a highly-alloyed (Al,Gd)N combinatorial thin film grown by RF sputtering on a GaN substrate, looking for any evidence of chemical or phase segregation or structural disorder in the films. Compositions with between 13% and 32% Gd (on a cation basis) were studied. No evidence was found for chemical or phase segregation in any studied composition. Higher degrees of Gd incorporation led to greater structural disorder in the film and a tendency toward amorphization; however, electron diffraction shows that the film does not become fully amorphous at any of the studied compositions, instead retaining textured local order even at 32% Gd. Electron energy loss spectra suggest that the material retains a locally wurtzite-like tetrahedral bonding environment at all studied compositions.

36 MATERIALS SCIENCE↗