Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Well Locations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Ground water use inventory in Minnesota using LANDSAT data

An irrigation ground water use inventory in Sherburne County, Minnesota, was attempted by indirectly locating irrigation wells by determining the location of irrigated lands. Digital classification of LANDSAT MSS imagery was employed using the IDIMS at Goddard Space Flight Center. Single-date classification proved moderately successful after accurate ground truth data were obtained. A combination of supervised and unsupervised classification was used. Multitemporal analysis using August 10 and May 21, 1978 imagery was also attempted. This unsupervised classification proved most successful in identifying crops and irrigated fields.

Beissel, D. R.↗
NASA NTRS2018

Wall-Resolved Large-Eddy Simulations of Transonic Shock-Induced Flow Separation

Wall-resolved large-eddy simulations of shock-induced flow separation over an axisymmet- ric bump for a Mach number of 0.875 and a chord-based Reynolds number of 2.763 million are performed. The incoming boundary layer has a momentum-thickness Reynolds number of 6600 at 1.5 chords upstream of the bump. The calculations, which employ up to 24 billion grid points, simulate the experimental model of Bachalo and Johnson (AIAA Journal, Vol. 24, No. 3, 1986), except that the tunnel walls are ignored and free air is assumed. The effects of domain span and grid resolution are examined along with the main flowfield features. The predicted shock position as well as separation and reattachment locations agree well with the experiment. Grid convergence is observed in the attached region well upstream of separation. Two-point azimuthal correlations suggest that a span of at least 20 degrees is needed in the attached region, while a 120-degree span might be barely large enough in the separated region. Computed root-mean-square surface pressure fluctuations at the shock foot reach about 5 percent of ambient pressure and the level at reattachment location drops to about half of the primary peak. Simulations reveal evidence of the low-frequency shock unsteadiness; however, a much longer statistical sample is needed to investigate this phenomenon.

Uzun, Ali↗
NASA NTRS1976

Lineaments on Skylab photographs: Detection, mapping, and hydrologic significance in central Tennessee

The author has identified the following significant results. Lineaments were detected on Skylab photographs by stereo viewing, projection viewing, and composite viewing. Sixty-nine percent more lineaments were found by stereo viewing than by projection, but segments of projection lineaments are longer; total length of lineaments found by these two methods is nearly the same. Most Skylab lineaments consist of topographic depression: stream channel alinements, straight valley walls, elongated swales, and belts where sinkholes are abundant. Most of the remainder are vegetation alinements. Lineaments are most common in dissected areas having a thin soil cover. Results of test drilling show: (1) the median yield of test wells on Skylab lineaments is about six times the median yield of all existing wells; (2) three out of seven wells on Skylab lineaments yield more than 6.3 1/s (110 gal/min): (3) low yields are possible on lineaments as well as in other favorable locations; and (4) the largest well yields can be obtained at well locations of Skylab lineaments that also are favorably located with respect to topography and geologic structure, and are in the vicinity of wells with large yields.

Moore, G. K.↗
NASA NTRS1984

Comparison of theoretical and flight-measured local flow aerodynamics for a low-aspect-ratio fin

Flight test and theoretical aerodynamic data were obtained for a flight test fixture mounted on the underside of an F-104G aircraft. The theoretical data were generated using two codes, a two dimensional transonic code called Code H, and a three dimensional subsonic and supersonic code call wing-body. Pressure distributions generated by the codes for the flight test fixture as well as boundary layer displacement thickness generated by the two dimensional code were compared to the flight test data. The two dimensional code pressure distributions compared well except at the minimum pressure point and trailing edge. Shock locations compared well except at high transonic speeds. The three dimensional code pressure distributions compared well except at the trailing edge of the flight test fixture. The two dimensional code does not predict displacement thickness of the flight test fixture well.

Johnson, J. B.↗
NASA NTRS1998

The Structure of Evolution LOCBURST: The BATSE Burst Location Algorithm

The gamma-ray bursts (GRB) location algorithm used to produce the BATSE GRB locations is described. The general flow of control of the current location algorithm is presented and the significant properties of the various physical inputs required are identified. The development of the burst location algorithm during the releases of the BATSE 1B, 2B, and 3B gamma-ray burst catalogs is presented so that the reasons for the differences in the positions and error estimates between the catalogs can be understood. In particular, differences between the 2B and 3B locations are discussed for events that have moved significantly and the reasons for the changes explained. The locations of bursts located independently by the interplanetary network are used to illustrate the effect on burst location accuracy of various components of the algorithm. IPN data as well as locations from other gamma-ray instruments are used to calculate estimates of the systematic errors on BATSE burst locations.

Pendleton, Geoffrey N.↗
NASA NTRS1983

Aerodynamic characteristics of a series of twin-inlet air-breathing missile configurations. 2: Two-dimensional inlets at supersonic speeds

A series of air-breathing missile configurations was investigated to provide a data base for the design of such missiles. The model could be configured with either twin axisymmetric or two dimensional inlets. Three circumferential inlet locations were investigated: 90 deg, 115 deg, and 135 deg from the top center. Two vertical wing locations, as well as wingless configurations, were used. Three tail configurations were formed by locating the tail surfaces either on the inlet fairings or on fairings on the body. The surfaces were used to provide pitch control. Two dimensional inlets with extended compression surfaces, used to improve the angle-of-attack performance of the inlets for wingless configurations, were also investigated. The two dimensional inlet configurations are covered.

Hayes, C.↗
NASA NTRS1983

Aerodynamic characteristics of a series of twin-inlet air-breathing missile configurations. 3: Axisymmetric and two-dimensional inlets at subsonic-transonic speeds

A series of air-breathing missile configurations was investigated to provide a data base for the design of such missiles. The model could be configurated with either twin axisymmetric or two dimensional inlets. Three circumferential inlet locations were investigated: 90 deg, 115 deg, and 135 deg from the top center. Two vertical wing locations, as well as wingless configurations, were used. Three tail configurations were formed by locating the tail surfaces either on the inlet fairing or on the inlet fairing or on fairings on the body. The surfaces were used to provide pitch control. Two dimensional inlets with extended compression surfaces, used to improve the angle-of-attack performance of the inlets for wingless configurations, were also investigated. The twin axisymmetric two dimensional inlet types without internal flow are covered, and the boost configuration of an air-breathing missile is simulated.

Hayes, C.↗
NASA NTRS1986

Comparison of theoretical and flight-measured local flow aerodynamics for a low-aspect-ratio fin

Flight test and theoretical aerodynamic data were obtained for a flight test fixture mounted on the underside of an F-104G aircraft. The theoretical data were generated using two codes: a two-dimensional transonic code called code H, and a three-dimensional subsonic and supersonic code called wing-body. Pressure distributions generated by the codes for the flight test fixture, as well as compared with the flight-measured data. The two-dimensional code pressure distributions compared well except at the minimum pressure point and the trailing edge. Shock locations compared well except at high transonic speeds. However, the two-dimensional code did not adequately predict the displacement thickness of the flight test fixture. The three-dimensional code pressure distributions compared well except at the trailing edge of the flight test fixture.

Johnson, J. Blair↗
NASA NTRSDate not supplied

Mars 2020 Reconstructed Aerothermal Environments and Design Margins

The Mars 2020 aeroshell's thermal protection system was nearly identical to the Mars Science Laboratory system that successfully completed its mission for the Curiosity rover's landing in 2012. It was predicted that, like Mars Science Laboratory, the Mars 2020 heatshield would experience boundary layer transition and that the thermal protection system would provide sufficient material thickness margins against the aerothermal environments, even after adding radiative heating that was not included for Mars Science Laboratory. The Mars 2020 flight instrumentation suite included heatshield sensors similar to Mars Science Laboratory and new backshell measurements. A full set of surface pressure and in-depth temperature data were collected during atmospheric entry. This paper provides an initial analysis of the flight data and focuses on the reconstructed total surface heat flux inferred from the measured temperatures. Turbulent boundary layer conditions again were observed on the Mars 2020 heatshield, and the temperatures at all eleven heatshield and six backshell thermocouple in-depth sensor locations were well within system capabilities due to favorable entry conditions and conservative uncertainties. New computational fluid dynamics results on the reconstructed entry trajectory are compared to the measured surface pressures and reconstructed total heat fluxes. The predicted heatshield surface pressures at six locations match the data qualitatively and quantitatively well, as expected. Smooth-wall laminar heating predictions prior to boundary layer transition fall above the reconstructed heating on the heatshield. After the observed boundary layer transition time, total heat flux based on algebraic turbulence model calculations generally match the heat flux trends relative to one another. The convective heat flux was predicted to constitute the majority of the total heating. On the backshell, smooth-wall laminar total heat flux predictions generally exceed the reconstructed total heating at six locations. At each of these locations, it is estimated that radiative heating provided almost all of the total heating. The Mars 2020 as-flown aerothermal environments were well below the design levels for all measurement locations due to conservative design assumptions and a stressing design trajectory.

Mars 2020↗
NASA NTRSDate not supplied

Mars 2020 Reconstructed Aerothermal Environments and Design Margins

The Mars 2020 aeroshell's thermal protection system was nearly identical to the Mars Science Laboratory system that successfully completed its mission for the Curiosity rover's landing in 2012. It was predicted that, like Mars Science Laboratory, the Mars 2020 heatshield would experience boundary layer transition and that the thermal protection system would provide sufficient material thickness margins against the aerothermal environments, even after adding radiative heating that was not included for Mars Science Laboratory. The Mars 2020 flight instrumentation suite included heatshield sensors similar to Mars Science Laboratory and new backshell measurements. A full set of surface pressure and in-depth temperature data were collected during atmospheric entry. This paper provides an initial analysis of the flight data and focuses on the reconstructed total surface heat flux inferred from the measured temperatures. Turbulent boundary layer conditions again were observed on the Mars 2020 heatshield, and the temperatures at all eleven heatshield and six backshell thermocouple in-depth sensor locations were well within system capabilities due to favorable entry conditions and conservative uncertainties. New computational fluid dynamics results on the reconstructed entry trajectory are compared to the measured surface pressures and reconstructed total heat fluxes. The predicted heatshield surface pressures at six locations match the data qualitatively and quantitatively well, as expected. Smooth-wall laminar heating predictions prior to boundary layer transition fall above the reconstructed heating on the heatshield. After the observed boundary layer transition time, total heat flux based on algebraic turbulence model calculations generally match the heat flux trends relative to one another. The convective heat flux was predicted to constitute the majority of the total heating. On the backshell, smooth-wall laminar total heat flux predictions generally exceed the reconstructed total heating at six locations. At each of these locations, it is estimated that radiative heating provided almost all of the total heating. The Mars 2020 as-flown aerothermal environments were well below the design levels for all measurement locations due to conservative design assumptions and a stressing design trajectory.

Mars 2020↗
NASA NTRS2001

In Interactive, Web-Based Approach to Metadata Authoring

NASA's Global Change Master Directory (GCMD) serves a growing number of users by assisting the scientific community in the discovery of and linkage to Earth science data sets and related services. The GCMD holds over 8000 data set descriptions in Directory Interchange Format (DIF) and 200 data service descriptions in Service Entry Resource Format (SERF), encompassing the disciplines of geology, hydrology, oceanography, meteorology, and ecology. Data descriptions also contain geographic coverage information, thus allowing researchers to discover data pertaining to a particular geographic location, as well as subject of interest. The GCMD strives to be the preeminent data locator for world-wide directory level metadata. In this vein, scientists and data providers must have access to intuitive and efficient metadata authoring tools. Existing GCMD tools are not currently attracting. widespread usage. With usage being the prime indicator of utility, it has become apparent that current tools must be improved. As a result, the GCMD has released a new suite of web-based authoring tools that enable a user to create new data and service entries, as well as modify existing data entries. With these tools, a more interactive approach to metadata authoring is taken, as they feature a visual "checklist" of data/service fields that automatically update when a field is completed. In this way, the user can quickly gauge which of the required and optional fields have not been populated. With the release of these tools, the Earth science community will be further assisted in efficiently creating quality data and services metadata. Keywords: metadata, Earth science, metadata authoring tools

Pollack, Janine↗
NASA NTRS2021

A Visual Tour of Carbon Export by Sinking Particles

To better quantify the ocean's biological carbon pump, we resolved the diversity of sinking particles that transport carbon into the ocean's interior, their contribution to carbon export, and their attenuation with depth. Sinking particles collected in sediment trap gel layers from four distinct ocean ecosystems were imaged, measured, and classified. The size and identity of particles was used to model their contribution to particulate organic carbon (POC) flux. Measured POC fluxes were reasonably predicted by particle images. Nine particle types were identified, and most of the compositional variability was driven by the relative contribution of aggregates, long cylindrical fecal pellets, and salp fecal pellets. While particle composition varied across locations and seasons, the entire range of compositions was measured at a single well-observed location in the subarctic North Pacific over one month, across 500 m of depth. The magnitude of POC flux was not consistently associated with a dominant particle class, but particle classes did influence flux attenuation. Long fecal pellets attenuated most rapidly with depth whereas certain other classes attenuated little or not at all with depth. Small particles (<100 m) consistently contributed ~5% to total POC flux in samples with higher magnitude fluxes. The relative importance of these small particle classes (spherical mini pellets, short oval fecal pellets, and dense detritus) increased in low flux environments (up to 46% of total POC flux). Imaging approaches that resolve large variations in particle composition across ocean basins, depth, and time will help to better parameterize biological carbon pump models

Carbon flux↗
NASA NTRSDate not supplied

Radioactivity of Sediments at the Atacama Rover Astrobiology Drilling Studies Field Site

Introduction: During the 2018 Atacama Rover Astrobiology Drilling Studies (ARADS) field activities, we conducted a survey of surface and subsurface sediment radioactivity. Our objective was to characterize the radiation environment of various near-surface sampling locations, as well as along the entire profile of a 2.60 m deep pit that had been dug near one of the ARADS rover drill site locations. This pit was used to collect samples that have been well characterized [2] for comparison to samples collected and analyzed by the rover.

ARADS↗
NASA NTRS2005

Growth of periodic nano-layers of nano-crystals of Au, Ag, Cu by ion beam

Multilayered thin films of SiO2/AU+ SiO2/, SiO2/Ag+ SiO2/, and SiO2/Cu+ SiO2/, were grown by deposition. We have previously shown that MeV ion Bombardment of multi-nano-layers of SiO2/AU+ SiO2/ produces Au nanocrystals in the AU+ SiO2 layers. An increased number of nano-layers followed by MeV ion bombardment produces a wide optical absorption band, of which its FWHM depends on the number of nano-layers of SiO2/AU+ SiO2/. We have successfully repeated this process for nano-layers of SiO2/Ag+ SiO2/, and SiO2/Cu+ SiO2/. In this work we used 5 MeV Si as the post deposition bombardment ion and monitored the location as well as the optical absorption's FWHM for each layered structure using Optical Absorption Photospectrometry. The concentration and location of the metal nano-crystals were measured by Rutherford Backscattering Spectrometry. We will report on the results obtained for nano-layered structures produced by post deposition bombardment of SiO2/AU+ SiO2/, SiO2/Ag+ SiO2/, and SiO2/Cu+ SiO2/ layered systems as well as the results obtained from a system containing a periodic combination of SiO2/AU+ SiO2/, SiO2/Ag+ SiO2/, and SiO2/Cu+ SiO2/.

Smith, Cydale C.↗
NASA NTRSDate not supplied

Informing New Concepts for UAS and Autonomous System Safety Management using Disaster Management and First Responder Scenarios

As emerging flight operations become more prevalent and increasingly automated and distributed, the capabilities for managing safety of vehicles and operations will also need to evolve. To address this challenge, the National Academies has envisioned an In-Time Aviation Safety Management System (IASMS) capability for a wide range of aviation operations including current commercial operations as well as new entrants envisioned with advanced air mobility (AAM). The suite of IASMS services, functions, and capabilities (SFCs) would be implemented in a federated approach and would address trends as well as individual operations. Through predictive modeling and data analysis, IASMS is envisioned to identify arising risks so that they can be mitigated, in-time, before a safety incident occurs. IASMS and its requisite set of SFCs must leverage a wide range of information to perform. To better understand these new needs, FSF worked with the aviation and humanitarian communities to develop and validate scenarios that include traditional aviation operations and UAS operations intermingled as they are deployed for disaster management and first responder (DMFR) situations. The three scenarios developed include: • Post Natural disaster response, such as a hurricane, involving multiple parties utilizing traditional aviation and UAS to support rescue operations, surveil damage, and locate survivors needing assistance. • Wildfire fighting in remote locations with traditional aircraft for transport and fire-retardant delivery combined with UAS for surveillance of fire locations as well as to track individual firefighter locations. • Medical Operations and AAM in Urban Environments including passenger-carrying helicopters and AAM vehicles, medical missions (such as transport of radio-pharmaceuticals), and other UAS delivery operations (such as the delivery of defibrillators). Each scenario was developed and validated by representatives with expertise in humanitarian operations, urban and rural emergency response, air traffic management, UAS operations, and traditional flight operations. The scenario definitions address roles and responsibilities of individual actors, the appropriate utilization of UAS, and the actions taken by those actors to appropriately manage risks associated with the mission and environment. The risks to aviation traffic and to people on the ground explored included potential risks arising from incompatibilities in calculating reference altitudes (eg, differing uses of AGL, MSL, barometric, or GPS-derived values), loss of command and control (C2) communications, rapid changes in weather and winds, and physical interference. For each risk, IASMS SFCs were postulated in the context of monitoring services, risk assessment capabilities, and identifying appropriate mitigation strategies. The identified SFC capabilities were envisioned from known services postulated for IASMS and for UTM. For these unique environments, IASMS SFCs are needed to address conditions such as hazardous payloads, micro-climates and urban canyons, and the need to keep uninvolved air traffic out of the area where DMFR operations are being conducted. The second phase of analysis focused on inferring the specific information needs and the SFCs for IASMS, utilizing a structure of 16 information classes to organize requirements. For each of the risks identified in the workshops, it was postulated what data sources would be necessary to monitor critical aspects of the risk (eg, surrounding air traffic, ground population, terrain, etc). to be directly measured as well as data that would be derived, which implies additional SFCs for different actors to understand what information would likely be exchanged between parties. For an IASMS to be effective, additional research is needed to develop the advanced algorithms that can address the increasingly autonomous and complex operations in differing environments and to develop means of identifying unknown risks. Looking at these scenarios highlighted a number of research issues. These include the ability to quickly "cordon off" airspace thru temporary flight restrictions (TFRs) or other means, developing clear definitions to enable automation-based algorithms for prioritizing operations, defining airspace density metrics, standardization of altitude reporting, and establishing a basis for safety data metrics definition and collection. This paper seeks to outline the development of an IASMS in the context of the DMFR scenarios and resulting demonstrations. Utilizing this contextual approach, NASA will generate recommendations for an assured safety framework for AAM operations that enables AAM operations to safely access the NAS.

In Time Aviation Safety Management System↗
NASA NTRS2001

Preliminary Design of a Lightning Optical Camera and ThundEr (LOCATE) Sensor

The preliminary design of an optical/acoustical instrument is described for making highly accurate real-time determinations of the location of cloud-to-ground (CG) lightning. The instrument, named the Lightning Optical Camera And ThundEr (LOCATE) sensor, will also image the clear and cloud-obscured lightning channel produced from CGs and cloud flashes, and will record the transient optical waveforms produced from these discharges. The LOCATE sensor will consist of a full (360 degrees) field-of-view optical camera for obtaining CG channel image and azimuth, a sensitive thunder microphone for obtaining CG range, and a fast photodiode system for time-resolving the lightning optical waveform. The optical waveform data will be used to discriminate CGs from cloud flashes. Together, the optical azimuth and thunder range is used to locate CGs and it is anticipated that a network of LOCATE sensors would determine CG source location to well within 100 meters. All of this would be accomplished for a relatively inexpensive cost compared to present RF lightning location technologies, but of course the range detection is limited and will be quantified in the future. The LOCATE sensor technology would have practical applications for electric power utility companies, government (e.g. NASA Kennedy Space Center lightning safety and warning), golf resort lightning safety, telecommunications, and other industries.

Phanord, Dieudonne D.↗
NASA NTRS2018

Portable, Low-Cost, Column Carbon Dioxide and Methane Measurements for Validating Satellite Observations in Remote Locations

We present a low-cost (~$10K per instrument), portable solution to ground-based validation of satellite observations for difficult to reach locations with precisions of 1 ppm XCO2 and 10 ppb XCH4 for hourly data products. While Total Carbon Column Observing Network (TCCON) is the gold-standard for ground validation, there are locations where a ground column validation data point would be useful but conditions are not conducive to a permanent station. Examples include wetlands, thawing permafrost, the tropics, the Amazon, sub-Saharan Africa, as well as locations without a power grid or with geopolitical conflict. In addition, the low-cost and portability mean a geographical region can be studied in depth with multiple instruments. This passive, sun-pointing instrument is a miniaturized, laser heterodyne radiometer (mini-LHR) that has been under development by our team since 2009. It can be operated either in tandem with AERONET (a global network of 500 instruments that measure aerosol optical depth), or as a stand-alone instrument with a low-cost (~$3K), light-weight sun tracker. One of the main benefits of the mini-LHR is that it can quickly reach remote locations and provide a validation measurement even if there is limited or no infrastructure at the site. The instrument weighs ~10 lbs, fits into a backpack, and is powered by two folding solar panels and a battery pack. In clear conditions, the instrument can be set-up in under an hour. Portability means that mini-LHRs can be easily moved for side-by-side comparisons with other mini-LHRs and with TCCON which simplifies assessing instrument bias as well as accuracy. Like TCCON, the mini-LHR points directly at the sun with a narrow field-of-view and is its insensitivity to cloud and aerosol scattering that is common to nadir-pointing passive satellite approaches. Here we present a collection of sample data sets to demonstrate performance from locations that vary in climate, altitude, solar zenith angle, hours of sun per day, etc., as well as data from side-by-side TCCON comparisons. Retrievals of CO2 and CH4 were completed using the NASA/Goddard's Planetary Spectrum Generator (PSG) that incorporates meteorological inputs from Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2) data set.

Wilson, Emily W.↗
NASA NTRS1994

Comptel measurements of the gamma-ray burst GRB 930131

On 1993 January 31 at 1857:12 Universal Time (UT), the Imaging Compton Telescope COMPTEL onboard the Compton Gamma Ray Observatory (CGRO) detected the cosmic gamma-ray burst GRB 930131. COMPTEL's MeV imaging capability was employed to locate the source to better than 2 deg (1 sigma error radius) within 7 hr of the event, initiating a world-wide search for an optical and radio counterpart. The maximum likelihood position of the burst from the COMPTEL data is alpha(sub 2000) = 12h 18m, delta(sub 2000) = -9 deg 42 min, consistent with independent CGRO-Burst and Transient Source Experiment (CGRO-BATSE) and Energetic Gamma Ray Experiment Telescope (EGRET) locations as well as with the triangulation annulus constructed using BATSE and Ulysses timing data. The combined COMPTEL and EGRET burst data yield a better estimate of the burst location: alpha(sub 2000) = 12h 18m and delta(sub 2000) = -10 deg 21 min, with a 1 sigma error radius of 32 min. In COMPTEL's energy range, this burst was short, consisting of two separate spikes occurring within a approximately 1 s interval with a low intensity tail for approximately 1 s after the second spike. No statistically significant flux is present for a 30 s period after the main part of the burst. This is consistent with the EGRET data. The COMPTEL telescope events indicate a hard, power-law emission extending to beyond 10 MeV with a spectral index of -1.8 +/- 0.4. The rapid fluctuations and high intensities of the gamma-ray flux greater than 10 MeV place the burst object no farther than 250 pc if the burst emission is not beamed.

Ryan, J.↗