Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “W”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

The gamma-gamma prime region of the Ni-Al-Cr-Ti-W-Mo system at 850 C

The compositional limits of gamma and gamma-prime phases in nickel-base superalloys are determined experimentally. It is found that gamma-prime had the following range of compositions for the various elements contained in this phase: 72.1 to 78.0 at.% Ni; 7.8 to 17.3 at.% Al; 1.5 to 8.9 at.% Cr; 0.3 to 13.9 at.% Ti, 0.0 to 3.9 at.% Mo, and 0.0 to 7.2 at.% W. The composition of gamma varied as follows: Ni is balanced; 1.9 to 15.4 at.% Al; 6.6 to 30.7 at.% Cr; 0.0 to 3.1 at.% Ti; 0.0 to 8.7 at.% Mo; and 0.0 to 5.0 at.% W. W additions to the gamma appeared to increase somewhat the solubility of Al in this phase. Mo and W added together decreased the solubility of Al in gamma.

Dreshfield, R. L.↗

Moored surface wind observations at four sites along the Pacific equator between 140 and 95 deg W

Moored surface wind measurements were recorded along the Pacific equator at 140, 124, 110, and 95 deg W during portions of 1980-1985. Minimum record length is one year. The annual mean and monthly mean westward speeds at 110 deg W were about 1.5 m/s higher during the year preceding the 1982-1983 El Nino than in the year following this event. The annual cycle, which moved westward at about 0.8 m/s, consisted of weak westward and northward speeds in February-April and vice versa in September-October. The spectral slope between 5-day and 0.05-day periods was -1.5. The rms amplitude of the 95-percent statistically significant diurnal period oscillation was 0.3 m/s, and the meridional component was nearly twice as large as the zonal component. The diurnal period wave was coherent (at the 95-percent confidence level) between 95 and 124 deg W, with westward phase propagation of about 138 m/s. No statistically significant spectral peak was found in the 40- to 50-day intraseasonal period band. The surface zonal ocean current component, which reached approximately 0.5 and -0.5 m/s in April and October, respectively at 110 deg W, influenced the surface wind stress computed from the quadratic bulk aerodynamic formulation by 10-20 percent.

Halpern, David↗

Test Results of a 200 W Class Hall Thruster

The performance of a 200 W class Hall thruster was evaluated. Performance measurements were taken at power levels between 90 W and 250 W. At the nominal 200 W design point, the measured thrust was 11.3 mN. and the specific impulse was 1170 s excluding cathode flow in the calculation. A laboratory model 3 mm diameter hollow cathode was used for all testing. The engine was operated on laboratory power supplies in addition to a breadboard power processing unit fabricated from commercially available DC to DC converters.

Jacobson, David↗

Evaluating Thermally Damaged Polyimide Insulated Wiring (MIL-W-81381) with Ultrasound

A series of experiments to investigate the use of ultrasound for measuring wire insulation have been conducted. Initial laboratory tests were performed on MIL-W-81381/7,/12, and /21 aviation wire, a wire that has polyimide (Kapton Registered Trademark) layers for insulation. Samples of this wiring were exposed to 370C temperatures for different periods of time to induce a range of thermal damage. For each exposure, 12 samples of each gauge (12, 16, and 20 gauges) were processed. The velocity of the lowest order axisymmetric ultrasonic guided mode, a mode that is sensitive to the geometry and stiffness of the wire conductor and insulation, was measured. The phase velocity for the 20-gauge MIL-W-81381/7 wire had a baseline value of 3023 +/- 78 m/s. After exposure to the high temperatures, the wire's phase velocity rapidly increased, and reached an asymptotic value of 3598 +/- 20 m/s after 100 hours exposure. Similar behavior was measured for the 16 gauge MIL-W-81381/21 wire and 12 gauge MIL-W-81381/12 wire which had baseline values of 3225 +/- 22 m/s and 3403 +/- 33 m/s respectively, and reached asymptotic values of 3668 +/- 19 m/s, and 3679 +/- 42 m/s respectively. These measured velocity changes represent changes of 19, 14, and 8 percent respectively for the 20, 16, and 12 gauge wires. Finally, some results for a wire with an ethylene tetrafluoroethylene insulation are reported. Qualitatively similar behaviors are noted ultrasonically.

Madaras, Eric I.↗

Local oscillator chain for 1.55 to 1.75 THz with 100-(mu)W peak power

We report on the design and performance of a fix-tuned x2x 3x 3 frequency multiplier chain that covers 1.55-1.75 THz. The chain is nominally pumped with 100 mW at W-band. At 120 K the measured output power is larger than 4 (mu)W across the band with a peak power of 100 (mu) W at 1.665 THz. A similar chain operated at room temperature produced a peak power of 21 (mu)W. These power levels now make it possible to deploy multipixel heterodyne imaging arrays in this frequency range.

frequency multiplier↗

Dual Frequency Feed Horn Design for a Compact Cloud and Precipitation Radar Operating at Ka- and W-band

We present the design of a compact dual frequency feed horn optimized to operate at Ka-band (35.75 GHz) and W-band (94.05 GHz). The structure consists of a single spline profile horn along with a diplexer having orthogonal Ka- and W-band ports and a band pass filter at the Ka band port. The filter is used to achieve high isolation between the Ka- and W-band ports. A directivity of 21 dB and -12 dB beam width of 31 degrees was achieved at Ka-band and a directivity of 26 dB and -12 dB beam width of 21 degrees was achieved at W-band. The overall structure is compact and easy to machine. The dual frequency horn will be tested as part of a Ka/W-band breadboard radar.

Cofield, Rick↗

The effects of composition on mechanical properties of W-4Re-Hf-C alloys

Studies were made of the effects of alloy composition on the mechanical behavior of as-worked W-4Re-Hf-C alloys containing up to about 0.8 mol % Hfc. Extracted second-phase particles were analyzed and related to alloy composition and creep strength. While strengthening is attributed to HfC particles, the presence of excess hafnium or carbon (above the calculated amounts for stoichiometric HfC) in swaged W-4Re-Hf-C alloys generally causes a reduction of the high-temperature (1930 C) tensile strength; maximum creep strength is, however, indicated for alloys with a slight (about 0.05 to 0.1 at. %) excess of hafnium. Particle strengthening is reduced by WC in solid solution with HfC for allow compositions with an excess of carbon. The low-temperature ductility of worked W-4Re-Hf-C alloys appears to be far more dependent on the amount of excess C or Hf present than on the HfC particle content in the range studies.

Witzke, W. R.↗

Tropospheric Ozone Over a Tropical Atlantic Station in the Northern Hemisphere: Paramaribo, Surinam (6 deg N, 55 deg W)

We present an analysis of 2.5 years of weekly ozone soundings conducted at a new monitoring station in Paramaribo, Surinam (6 deg N,55 deg W). This is currently one of only three ozone sounding stations in the northern hemisphere (NH) tropics, and the only one in the equatorial Atlantic region. Paramaribo is part of the Southern Hemisphere ADditional Ozone Sounding program (SHADOZ). Due to its position close to the equator, the Inter Tropical Convergence Zone (ITCZ) passes over Paramaribo twice per year, which results in a semi-annual seasonality of many parameters including relative humidity and ozone. The dataset from Paramaribo is used to: (1) evaluate ozone variability relative to precipitation, atmospheric circulation patterns and biomass burning; (2) contrast ozone at the NH equatorial Atlantic with that at nearby southern hemisphere (SH) stations Natal (6 deg S,35 deg W) and Ascension (8 deg S,14 deg W); (3) compare the seasonality of tropospheric ozone with a satellite-derived ozone product: Tropical Tropospheric Ozone Columns from the Modified Residual method (MR-TTOC). We find that Paramaribo is a distinctly Atlantic station. Despite its position north of the equator, it resembles nearby SH stations during most of the year. Transport patterns in the lower and middle troposphere during February and March differ from SH stations, which leads to a seasonality of ozone with two maxima. MR-TTOC over Paramaribo does not match the observed seasonality of ozone due to the use of a SH ozone sonde climatology in the MR method. The Paramaribo ozone record is used to suggest an improvement for northern hemisphere MR-TTOC retrievals. We conclude that station Paramaribo shows unique features in the region, and clearly adds new information to the existing SHADOZ record.

Peters, W.↗

The W Serpentis binaries with a few words on epsilon Aurigae

The Algol systems, U-Cephei and V356 Sagittarii, which should be included among the W Serpentis stars, characterized by strong ultraviolet emission lines are discussed. The spectra of the W-Ser stars are similar to those of the T-Tauri stars, and a similarity of physical conditions is indicated. A model of W-Serpentis, a B-star embedded in a thick disk, may be relevant to other exotic eclipsing systems, possibly even to obliquity of ecliptic Aurigae. The obliquity of ecliptic and the relationship to Aur, BM Orionis is reviewed; the system probably contains a pre main sequence star highly flattened by differential rotation.

Plavec, M. J.↗

Sputtered W-N diffusion barriers

The thermal stability of reactively sputtered tungsten-nitrogen alloy thin films is investigated for the application as diffusion barriers in silicon contact metallizations. The composition of W-N barriers is varied over a wide range including pure W. Aluminum, gold, and silver are used as low resistivity overlayers. Metallurgical interactions at temperatures ranging from 500 to 900 C are studied. Incorporating nitrogen into tungsten advantageously stabilizes all three systems. The overall failure takes place rapidly above critical temperatures that depend on both the metal overlayer and the microstructure of the barrier. In some cases, W-N alloys can effectively prevent interdiffusion at temperatures as high as 800 C for 30 min.

Kattelus, H. P.↗

Ongonite and topazite dikes in the Flying W ranch area, Tonto basin, Arizona

The petrogenesis of the topaz-rich ongonite and topazite dikes in the Flying W ranch area (Tonto basin, Arizona) was investigated, and the possible origin of the topaz in the Flying W rhyolite is discussed. The field, textural geochemical, and mineralogical characteristics of the topaz-bearing dikes in the Flying W ranch area all were found to support the genesis of the topaz-bearing bodies from a magma. The evidence obtained contradicts an origin for these rock types by greisenization or veining.

Kortemeier, Winifred T.↗

Efficient 30-W, 140-MHz rf amplifier for CW CO2 waveguide laser excitation

Details of a 30-W, 140-MHz rf amplifier for CW CO2 waveguide laser excitation are presented. The amplifier delivers 30 W into a 50-Ohm load while requiring only 40 W of dc power from a 28-V supply and 100 mW of rf drive power for an overall efficiency of 75 percent. A coupling-starting network design theory is given that provides the initiation over voltage for the discharge plasma from an rf power source of limited output voltage capability. The network then matches the drive circuit to the new input impedance of the operating discharge without any adjustments. This design theory applies to the whole class of networks whose losses can be approximated by a loss conductance in parallel with the gas discharge.

Hochuli, U. E.↗

X-ray-selected candidates for the RS CVn and W UMa classes of binary stars

X-ray luminosity, spectral type, radial-velocity variation, rotationally broadened line profile, and Ca II H and K line emission data are used to identify 12 new candidates for the RS CVn class and seven new candidates for the W UMa class from spectroscopic binaries which are contained in the Einstein Extended Medium Sensitivity Survey. Under the assumption that the candidates are genuine members of each class, local space density estimates of 4.47 + or - 1.19 x 10 to the -4th/cu pc for RS CVn binaries and 8.47 + or - 3.00 x 10 to the -5th/cu pc for W UMa binaries are found. Although the density estimate for the W UMa binaries is shown to be consistent with previous estimates obtained from optically selected samples, the estimate for the RS CVn binaries is more than an order of magnitude greater than previously determined space densities.

Fleming, Thomas A.↗

Sea level variabilities in the Gulf Stream between Cape Hatteras and 50 deg W - A Geosat study

Sea level variabilities in the Gulf Stream between Cape Hatteras and 50 deg W were examined by studying sea level residuals, relative to a 2-yr mean sea level, obtained from Geosat altimetry data for the period between November 1986 and December 1988. An array of sea-level time series was constructed for a region bounded by 30 deg N and 45 deg N in latitude and by 80 deg W and 50 deg W longitude. It is shown that the spectral characteristics of this time series varies with geographic location along the Gulf Stream path. Concurrent NOAA IR images are used to aid in the interpretation of sea level observations in terms of the variability of the stream's path, demonstrating the synergistic value of the combination of satellite-altimeter and IR data.

Vazquez, Jorge↗

A light synthesis study of W Ursae Majoris

A common set of Roche model parameters produces an accurate fit to I, V, and B data for W Ursae Majoris. The R data are defective. Two pairs of cool photospheric starspots are adopted in producing the fit. The model also adopts the cross-correlation radial velocity obtained by McLean and satisfactorily eliminates evidence, cited in the literature, for a third body in the system. Changing starspot longitudes, while maintaining fixed angular diameter, latitude, and temperature contrast from the adjacent photosphere, can simulate all of the types of light curve instability recorded in historical W Ursae Majoris light curves. Although the theoretical curve accurately fits primary minimum in U, the theoretical curve is too shallow at secondary minimum. A hot secondary explanation of W-type light curves, rather than starspots on an otherwise barotropic photosphere is argued.

Linnell, Albert P.↗

A 1-W, 30-ghz, CPW Amplifier for ACTS Small Terminal Uplink

The progress is described of the development of a 1 W, 30 GHz, coplanar waveguide (CPW) amplifier for the Advanced Communication Technology Satellite (ACTS)Small Terminal Uplink. The amplifier is based on Texas Instruments' monolithic microwave integrated circuit (MMIC) amplifiers; a three stage, low power amplifier, and a single stage, high power amplifier. The amplifiers have a power output of 190 mW and 0.710 W, gain of 23 and 4.2 dB, and efficiencies of 30.2 and 24 percent for the three stage and one stage amplifiers, respectively. The chips are to be combined via a CPW power divider/combiner circuit to yield the desired 1 W of output power.

Taub, Susan R.↗

A 1-W, 30-GHz, CPW amplifier for ACTS small terminal uplink

The progress to date of the development of a 1-W, 30-GHz, coplanar waveguide (CPW) amplifier for the Advanced Communication Technology Satellite (ACTS) Small Terminal Uplink is described. The amplifier is based on Texas Instruments' monolithic microwave integrated circuit (MMIC) amplifiers; a three-stage, low-power amplifier and a single stage, high-power amplifier. The amplifiers have a power output of 190 mW and 0.710 W, gain of 23 and 4.2 dB, and efficiencies of 30.2 and 24 percent for the three-stage and one-stage amplifiers, respectively. The chips are to be combined via a CPW power divider/combiner circuit to yield the desired 1 W of output power.

Taub, Susan R.↗

11.5 W pulsed operation of antiguided laser diode array

A 40-element array of antiguided laser diodes was constructed, which produced a peak power of 11.5 W in an in-phase radiation pattern. The laser has a threshold current of 0.5 A and a differential efficiency of 50 percent. It achieves the output power of 11.5 W at an input current of 18 A. The FWHM of the central lobe of the device at the output power of 11.5 W is 1.0 deg.

Major, J. S., Jr.↗