Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “USG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

2020 Idaho National Laboratory Water Use Report and Comprehensive Well Inventory (Rev. 29)

This 2020 Idaho National Laboratory Water Use Report and Comprehensive Well Inventory (Revision 29) provides water use information for production and potable water wells at the Idaho National Laboratory (INL) Site for calendar year 2020. It also provides detailed information for new, modified, and decommissioned wells Two new wells (TRA-2317 and USGS-150) were drilled in 2019 and are included in this report. One well (USGS-147) was modified in 2020. The location maps and detailed construction diagrams are provided.in the appendix. Fifty-six monitoring wells and boreholes were abandoned (decommissioned) in calendar year 2020. The location maps and construction diagrams, if available, for the decommissioned monitoring wells and boreholes are provided in the appendix. This report is being submitted in accordance with the Water Rights Agreement between the State of Idaho and the United States, for the United States Department of Energy (dated 1990), the subsequent Partial Decree for Water Right 34-10901 issued June 20, 2003, and the Final Unified Decree issued August 26, 2014.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2023

Reservoir Thermal Energy Storage Benchmarking (Rev. 3)

A benchmarking analysis of RTES research funded by GTO through the Beyond Batteries projects was conducted against the ESGC to see where they fit within the identified ESGC Use Cases. The projects were found to advance knowledge in multiple ESGC use cases, either directly or in some cases, indirectly as enabling technologies. This analysis is helpful to understand where RTES and associated research fits into the larger discussion around energy storage technologies. Also, a retrospective analysis of the Beyond Batteries projects was conducted to evaluate what the projects learned and how the results can be applied to advance the value of RTES. Major results of each of the studies are summarized in Table 2. Additionally, a comparative metrics analysis for RTES was completed to understand where RTES lies within the energy storage industry. Metrics for evaluation of RTES and its comparison to other storage technologies were selected and ranges of their values compiled. The selected metrics – LCOE (levelized cost of energy), capital costs, roundtrip efficiency, energy storage capacity, and storage time – were chosen based on data availability and have a particularly strong influence on the potential deployment of a storage technology. Charts which compare the metrics are presented in section 4.3 and show ranges for each of the 10 selected technologies. However, due to a lack of domestic operational facilities, values for RTES and for portions of the remaining technologies are based on theoretical modeling and studies of best-case scenarios. LCOE estimates for RTES fall within the lower reaches of Figure 15, but nevertheless amount to 2 – 5 times the ESGC Roadmap goal for LCOE, for example in the Facilitating and Evolving Grid Use Case. Capital costs for RTES sit on the higher end (Figure 16) but are expected to decrease as new projects are developed and the technology is refined. The theoretical roundtrip efficiency reported for RTES varies from mid to high percentages (Figure 17) with efficiencies upwards of 93% in modeled scenarios in the Portland Basin (Bershaw et al.,2020). RTES is also expected to have the largest energy storage capacities and longest storage times, likely matched only by lower efficiency hydrogen storage. To better assess the role that RTES could play in energy storage we examined it’s potential in the U.S. The potential depends on many factors. Recently, many researchers have started looking at deep sedimentary basins, depleted oil and gas fields, and basalt formations as potential targets for RTES development. The United States Geological Survey (USGS) has analyzed various cities and shown substantial RTES potential in the cooling sector (Pepin et al., 2021). By modeling RTES in low-quality groundwater (e.g., brackish), it is shown to be favorable across the U.S. with particular suitability in the Illinois Basin, Coastal Plains, and Basin and Range regions. Seasonal RTES operations have also been modeled in the Portland Basin by those at the USGS and Portland State University to simulate an RTES system supplying heating loads needed for the Oregon Health and Science University. Simulations suggest that high conductive heat loss in the initial years exists but tends to decrease with increasing time and development of the resource due to self-insulating nature of the basalts (Burns et al., 2020). Other national laboratory efforts are taking a close look at many of the technical issues involved with RTES (McLing et al., 2019, McLing et al., 2022). These include difficulties in understanding geochemical, hydrogeological, mechanical, and microbiological changes at such elevated temperatures and operational scenarios. Major gaps in research are identified and suggested for future work. With this increased focus to understand how to make RTES successful in the U.S., this technology could be a potential solution to many of the nation’s energy storage problems. For the energy independence of this country, the DOE should prioritize de-risking this technology by making future investments in pilot-scale demonstrations to attract potential investors.

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

Carbon, Nitrogen, and Sulfur Analysis of the Cetama Viognier Standard Reference Material

The Viognier sample was analyzed for C, N, and S concentrations and stable isotope compositions using an Elementar Vario Isotope Cube Elemental Analyzer (EA) that is coupled to an IsoPrime PrecisION IRMS. Powder samples were placed in tin capsules and then loaded onto a rotary autosampler. The autosampler dropped samples into the EA, and samples were combusted at 1175 °C over tungsten oxide in a continuous stream of helium carrier gas. A pulse of oxygen is added to the gas stream resulting in flash combustion of the tin capsule containing the sample, which raises the reaction temperature to approximately 1800 °C for a few seconds. The combustion reaction produces SO 2 , N 2 and CO 2 from any sulfur, nitrogen and carbon present in the sample. The resulting gases were then passed through a reduced copper reactor that was heated to 850 °C, to reduce NO x to N 2 , reduce SO 3 to SO 2 , and trap any volatile halogen compounds on silver wool. Following water removal using an adsorption tube, the N 2 , CO 2 , and SO 2 analyte gases were separated and purified using purge-trap columns. The purified gases were then carried through a thermal conductivity detector. The detector signal was passed to software that calculated elemental abundances based on integrated peak areas. The sample gases were then passed to the IRMS and stable isotope ratios were measured. Raw sample peak areas were corrected by subtracting the average peak area from blanks consisting of empty tin capsules run using the same EA analysis method. Blanks were also run following each replicate to verify that all the material was combusted. The Viognier sample was analyzed in triplicate on two days (target sample masses: 30, 60 and 90 mg). The following standards were analyzed to calibrate EA-IRMS measurements: IAEA-C6, USGS-40, USGS-41, IAEA-S1, and IAEA-S2.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Interface Specifications for RAdiation Portal Technology Enhancement & Replacement (RAPTER) Modules

Radiation Portal Monitors (RPMs) were deployed throughout the port and border infrastructure of the United States (U.S.) beginning in 2003 to monitor for the possible presence of uncontrolled radiological and nuclear materials. Since that time, the U.S. Government (USG) has learned much about the operational challenges faced in the field. Principal among the shortcomings has been the lack of flexibility afforded the USG when all Internet Protocol (IP) rights and interfaces of the system are owned by the Original Equipment Manufacturer (OEM).

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2024

Carbon Storage Site Mapping Inquiry Tool (MapIT)

To date, 48 projects, consisting of 139 wells, are currently under review with the Environmental Protection Agency’s (EPA) Underground Injection Control (UIC) Program for Class VI – wells used for geologic sequestration of carbon dioxide. The number of applications submitted is expected to increase in coming years with the increase of the 45Q tax credit available to projects that initiate construction prior to 2033. The amount of data collected to submit a Class VI permit is vast, and often disparate, coming from state, federal, and commercial entities, as well as field-specific data collected within an area of interest. When preparing for site selection and permitting, the initial aggregation of relevant public data can be time intensive. The Carbon Storage Site Mapping Inquiry tool (MapIT) was created to support and accelerate the discovery and accessibility of open-source data and information available across the USA. Data was aggregated and organized based on data types described within the EPA UIC Class VI permit documentation. The online tool enables users to explore hundreds of geospatial data layers and connect to additional external resources, leveraging API and REST services where possible to ensure updates to data in real time. MapIT enables users to explore state and federal data related to geologic, geophysical, structural, hydrologic, and contextual information. In addition to displaying spatial data and linking to external resources, MapIT leverages custom widgets to ensure that internal data and external data are discoverable and accessible. The widgets connect users to resources such as the USGS publications and the USGS Earthquake Catalog based on a user-defined location. This talk will describe data aggregation workflows, data types, data preparation, and tool development for MapIT. The Carbon Storage Site Mapping Inquiry Tool and underlying database are valuable, intuitive resources that empower government, academic, commercial and industry stakeholders to explore, analyze, and acquire carbon storage related data.

Morkner, Paige↗
DOE OSTI2024

Mapping Support for Targeted Critical Minerals Exploration and Extraction

The United States’ dependency on imported minerals poses significant risks to economic stability and national security due to potential supply disruptions. Recognizing the strategic importance of critical minerals, the Department of Energy (DOE) emphasizes the need for a secure and resilient supply chain to support emissions reduction, technology development, and capitalization on clean energy opportunities. The DOE’s Office of Manufacturing and Energy Supply Chains (MESC), in collaboration with the Office of Policy (OP), addresses these vulnerabilities by focusing on upstream domestic critical minerals production, balancing extraction with social and environmental goals, including conservation, environmental justice, and respect for Tribal sovereignty. This report showcases a collaborative effort involving Idaho National Laboratory (INL), Argonne National Laboratory (Argonne), National Renewable Energy Laboratory (NREL), and the U.S. Geological Survey (USGS) to map mineral development potential along with key social and environmental datasets. A geographical information system (GIS)-based web map application was developed as a preliminary tool for environmental analysis, integrating 158 geospatial data layers such as critical habitat, land ownership, economic indicators, and environmental concerns. Data were sourced from agencies like the Bureau of Land Management (BLM) and USGS and processed using GIS technology to enhance visualization and analysis. The proposed analysis framework categorizes areas into high, mid, and low concern based on withdrawn lands, special status species, the Economic Development Capacity Index (EDCI) Mining Composite Index, and the Climate and Economic Justice Screening Tool (CEJST). While the application provides broad visualizations, it is not a substitute for detailed environmental reviews required under the National Environmental Policy Act (NEPA). Users must conduct further analyses and engage with tribal entities and other stakeholders for comprehensive planning. A case study of the Idaho Cobalt Belt (ICB) in Lemhi County, Idaho, has been provided in the report to illustrate the tool's practical use. This report introduces a GIS application and framework to support stakeholders in identifying and prioritizing areas for critical mineral exploration, promoting secure supply chains, and advancing the nation's energy independence through responsible resource stewardship.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Dayflow: CONUS Daily Streamflow Reanalysis, Version 1 (V1)

Dayflow V1 is a historical streamflow reanalysis dataset reconstructed for a 36-year period (1980-2015). The dataset provides both daily and monthly scale streamflow information at about 2.7 million NHDPlusV2 stream reaches in the conterminous US (CONUS). Dayflow is the result of a nationally scalable modeling framework that integrates the simulated runoff from the Variable Infiltration Capacity (VIC) model with the Routing Application for Parallel computatIon of Discharge (RAPID) routing model. Two types of streamflow products, simulated streamflow with or without assimilation of historic US Geological Survey (USGS) streamflow observations, are provided in Dayflow V1. A comprehensive evaluation at 7,526 USGS National Water Information System (NWIS) gauges is performed for both types of streamflow products. The resulting key evaluation metrics are also included in the Dayflow V1 Dataset.

13 HYDRO ENERGY↗
DOE OSTI2023

Structuring Nutrient Yields throughout Mississippi/Atchafalaya River Basin Using Machine Learning Approaches

To minimize the eutrophication pressure along the Gulf of Mexico or reduce the size of the hypoxic zone in the Gulf of Mexico, it is important to understand the underlying temporal and spatial variations and correlations in excess nutrient loads, which are strongly associated with the formation of hypoxia. This study’s objective was to reveal and visualize structures in high-dimensional datasets of nutrient yield distributions throughout the Mississippi/Atchafalaya River Basin (MARB). For this purpose, the annual mean nutrient concentrations were collected from thirty-three US Geological Survey (USGS) water stations scattered in the upper and lower MARB from 1996 to 2020. Eight surface water quality indicators were selected to make comparisons among water stations along the MARB over the past two decades. Principal component analysis (PCA) was used to comprehensively evaluate the nutrient yields across thirty-three USGS monitoring stations and identify the major contributing nutrient loads. The results showed that all samples could be analyzed using two main components, which accounted for 81.6% of the total variance. The PCA results showed that yields of orthophosphate (OP), silica (SI), nitrate–nitrites (NO 3 -NO 2 ), and total suspended sediment (TSS) are major contributors to nutrient yields. It also showed that land-planted crops, density of population, domestic and industrial discharges, and precipitation are fundamental causes of excess nutrient loads in MARB. These factors are of great significance for the excess nutrient load management and pollution control of the Mississippi River. It was found that the average nutrient yields were stable within the sub-MARB area, but the large nitrogen yields in the upper MARB and the large phosphorus yields in the lower MARB were of great concern. t-distributed stochastic neighbor embedding (t-SNE) revealed interesting nonlinear and local structures in nutrient yield distributions. Clustering analysis (CA) showed the detailed development of similarities in the nutrient yield distribution. Moreover, PCA, t-SNE, and CA showed consistent clustering results. This study demonstrated that the integration of dimension reduction techniques, PCA, and t-SNE with CA techniques in machine learning are effective tools for the visualization of the structures of the correlations in high-dimensional datasets of nutrient yields and provide a comprehensive understanding of the correlations in the distributions of nutrient loads across the MARB.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Mapping Geothermal Indicator Minerals Using Fusion of Target Detection Algorithms

Mineral mapping from satellite images provides valuable insights into subsurface mineral alteration for geothermal exploration. In previous studies, eight fundamental algorithms were used for mineral mapping utilizing USGS spectra, a collection of reflectance spectra containing samples of minerals, rocks, and soils created by the USGS. We used an ASD FieldSpec 4 Hi-RES NG portable spectrometer to collect spectra for analyzing ASTER images of the Coso Geothermal Field. Then, we established the ground-truth information and the spectral library by analyzing 97 samples. Samples collected from the field were analyzed using the CSIRO TSG (The Spectral Geologist of the Commonwealth Scientific and Industrial Research Organization). Based on the mineralogy study, multiple high-purity spectra of geothermal alteration minerals were selected from collected data, including alunite, chalcedony, hematite, kaolinite, and opal. Eight mineral spectral target detection algorithms were applied to the preprocessed satellite data with a proposed local spectral library. We measured the highest overall accuracy of 87% for alunite, 95% for opal, 83% for chalcedony, 60% for hematite, and 96% for kaolinite out of these eight algorithms. Three, four, five, and eight algorithms were fused to extract mineral alteration with the obtained target detection results. The results prove that the fusion of algorithms gives better results than using individual ones. In conclusion, this paper discusses the significance of evaluating different mapping algorithms. It proposes a robust fusion approach to extract mineral maps as an indicator for geothermal exploration.

Cavur, Mahmut↗
DOE OSTI2026

Multi-sensor Observations of a High-velocity Fireball over the South Atlantic on 2026 April 1

A high-velocity fireball was detected over the South Atlantic (41.9°S, 54.7°W) on 2026 April 1 at 02:13:14 UTC by U.S. Government (USG) sensors, with peak brightness at 90.5 km altitude. The event was well-observed from geostationary orbit by two civilian lightning imagers with near-orthogonal geometry, the Geostationary Operational Environmental Satellite-East Geostationary Lightning Mapper (GLM) and the Exploitation of Meteorological Satellites Meteosat Third Generation Imager 1 Lightning Imager, and it produced low-frequency acoustic signatures. The GLM measured a total radiated energy of 2.4 × 10 10 J, corresponding to a calculated impact energy of 0.086 kt TNT equivalent. Stereoscopic triangulation of the imager tracks yields an independent pre-atmospheric velocity of ~57 km s −1 , some 18% below the USG-reported value. Because orbital provenance is acutely sensitive to the entry velocity, whose reported uncertainty could be substantial, this discrepancy is notable. We document the multi-sensor record and identify the analysis required to assess provenance, which a subsequent study will present.

Silber, Elizabeth Allaryce [Sandia National Lab. (↗
DOE OSTI2020

Gas Hydrate Saturation Estimation Form Acoustic Log Data in the 2018 Alaska North Slope Hydrate-01 Stratigraphic Test

Completed in December 2018, the Alaska North Slope Hydrate 01 stratigraphic test well provides a wealth of logging-while-drilling (LWD) data for strata to below the base of gas hydrate stability (BGHS). This well is intended to be the first of three wells drilled for a comprehensive long-term gas hydrate production test conducted by the National Energy Technology Laboratory, the Japan Oil, Gas and Metals National Corporation, and the U.S. Geological Survey (USGS). The Hydrate 01 stratigraphic test well confirmed the presence of gas hydrate in two sand reservoirs within the hydrate stability zone, indicating the suitability of this location for a long-term gas hydrate production test.<p>The USGS, using an effective-medium-theory rock-physics approach, has estimated gas hydrate saturations from compressional (P) and shear (S) wave log data acquired in the Hydrate 01 well. We assume that gas hydrate occurs as pore-filling load-bearing material (i.e., part of the grain matrix). For Unit D, approximately 500 feet above the BGHS, both P-wave and S-wave acoustic logs indicate moderate gas hydrate saturations with S-wave results slightly lower than those for P-waves. For the Unit B, located just above the BGHS, we obtain moderate to high gas hydrate saturation estimates from both sonic logs. Our P-wave saturation estimates agree well with results from electrical-resistivity-based estimates, whereas estimates from nuclear magnetic resonance LWD data generally suggest 5 to 10 percent higher saturations; our S-wave results suggest lower saturations. These differences likely indicate complexities in the form of gas hydrate occurrence within the sediment pore space, potentially including differences between hydrate occurrence in Units D and B.</p>

Haines, Seth↗
DOE OSTI2021

Introducing the GeoRePORT Resource Size Tool: Reporting on Geothermal Resource Size Estimations Using the Geothermal Resource Portfolio Optimization and Reporting Technique (GeoRePORT): Preprint

The Geothermal Resource Portfolio Optimization and Reporting Technique (GeoRePORT) was developed with funding from the U.S. Department of Energy Geothermal Technologies Office to assist in identifying and pursuing long-term investment strategies through the development of a resource reporting protocol. The assessment protocols used in GeoRePORT allow for comparison of project attributes across locations and geological settings to understand the feasibility of geothermal development. This work introduces the Resource Size Tool, a new feature within the GeoRePORT package that compiles two independent methods for estimating geothermal resource size in terms of energy capacity in MW. Energy production potential for twenty-three case studies was estimated with the Resource Size Tool in order to 1) generate a reasonable range of resource size estimates for a particular geothermal field; 2) illustrate the advantages and limitations of each methodology (such as data input requirements, estimate accuracy and precision, and the appropriate circumstances of use); and 3) test the ability of the resource size tool to provide useful and accurate information for geothermal stakeholders. The tool employs two methods widely used in the geothermal industry: (1) USGS Volumetric and (2) Power Density. Results from our case studies show general overlap between these two methods in terms of resource size estimates; however, they also reveal key differences between the two approaches that should be considered when using such estimates to drive development. First, the two methods rely on different input parameters and therefore one method may be more appropriate and/or accurate for a given project than the other. Second, the Power Density method was found to generate wider ranges of resource size predictions, more consistently aligning with actual power production of the field but with larger scales of error; whereas the USGS Volumetric method predicts narrower ranges but tends to overestimate when compared to current MW production. Future work will refine variables used in the methods with input data from other sections of GeoRePORT and modify uncertainty levels based on the particular datasets used for a given project.

geological↗
DOE OSTI2020

Nevada Higher Education Benefits from US Department of Energy (DOE) Environmental Management (EM) Nevada Program's Transfer of Geologic Samples - 20442

The Nevada National Security Site (NNSS), formerly the Nevada Test Site, was the location of 100 historic atmospheric and 828 historic underground nuclear tests from 1951 to 1992. Related to this historic nuclear testing, geologic and hydrologic studies of the site were conducted utilizing the skills and the expertise of the U.S. Geological Survey (USGS) and national laboratories (Los Alamos National Laboratory, Lawrence Livermore National Laboratory), who were principal in leading the development of weapons and were responsible for specific underground testing programs. The subsurface samples and technical/scientific data associated with NNSS geologic studies (past and present) are preserved and stored at the USGS Mercury Core Library and Data Center located at the NNSS. Currently, the facility stores over 2,000,000 linear feet of cores and cuttings from more than 2,600 drill holes that can be accessed for study. Most of the samples and historic geologic work was focused directly on subsurface geologic settings that relate directly to historic underground nuclear testing. Since 1992, the United States has observed a unilateral moratorium on full-scale nuclear testing, and the U.S. Department of Energy (DOE) Environmental Management (EM) Nevada Program is now responsible for hydrogeologic characterization of the potential impacts to the natural groundwater systems that may have resulted from historic underground nuclear tests. As part of this effort, the EM Nevada Program Underground Test Area (UGTA) Activity has drilled and completed over 58 deep (2,000 - 7,000 ft.) characterization wells, totaling in excess of 170,000 linear feet of cuttings and core samples. Cutting samples were collected as triplicate samples for each respective depth interval, to account for potential later nondestructive/destructive analysis and to preserve samples for regulatory purposes. Recently, it was recognized by the EM Nevada Program that opportunities may exist to reduce the cost and floor space required for the storage of geologic samples at the Mercury Core Library without impacting the integrity and representative nature of the samples necessary for project execution. An initiative was sponsored by EM Nevada Program to evaluate several options: 1) disposal of a portion of cuttings and cores in a land fill setting; 2) reduction in sample volume through skeletonizing core and cuttings from wells to a representative but much smaller number of samples; and 3) solicit potential interest in the academic community where other geoscientists could freely access the samples for studies. The Nevada state university system through the Nevada Bureau of Mines and Geology responded positively to the opportunity to receive these NNSS samples from the EM Nevada Program. In June 2019, approximately 17,000 geologic samples, representing greater than 170,000 linear feet of drilling and weighing over 20,000 pounds, were shipped from the NNSS to the Great Basin Science Sample and Records Library located in Reno, Nevada. The benefits resulting from this transfer were realized by the EM Nevada Program in terms of cost and space savings for geologic sample storage at the NNSS. The transfer did not impact the EM Nevada Program mission as access to representative geologic samples for regulatory and scientific purposes was preserved. Moreover, the Nevada Bureau of Mines and Geology acquired a significant resource of subsurface geologic samples and supporting technical data to support academic and scientific studies in a complex volcanic setting in southwest Nevada. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Improving Building Footprint Extraction Using NAIP and 3DEP Lidar Derived Features with Deep Learning

Accurate building footprint extraction is critical for applications ranging from population estimation to disaster management. Although optical imagery provides detailed spectral information, it often struggles with shadows, occlusions, and background clutter in dense urban environments. Lidar data, by contrast, offer precise elevation and structural attributes but face challenges such as variable point density and noise. This study integrates multispectral imagery from the U.S. Department of Agriculture (USDA) National Agriculture Imagery Program (NAIP) with lidar-derived feature height and intensity from the U.S. Geological Survey (USGS) 3D Elevation Program (3DEP) to improve footprint extraction using a U-Net–based deep learning model. A six-band input stack (RGB, near-infrared, height, intensity) was developed, normalized, and tiled for training and evaluation against Microsoft Global Building Footprints (GBF). Results from the Houston, TX test site show that the six-band model achieved a precision of 0.86, recall of 0.88, F1 score of 0.87, and Intersection-over-Union (IoU) of 0.76, consistently outperforming four-band baselines by reducing false positives while maintaining sensitivity. Predictions on withheld Houston tiles confirmed strong within-region generalization, yielded a precision of 0.78, recall of 0.81, F1 score of 0.79, and IoU of 0.66. Qualitative analysis further revealed limitations stemming from both training label quality and vegetation–building confusion. These findings demonstrate the complementary value of integrating spectral and structural information for robust building footprint extraction and how domain adaptation strategies can be used to enhance cross-regional transferability.

Liu, Jung Kuan [United States Geological Survey (U↗
DOE OSTI2020

Geothermal Data Gap Analysis Over the Western US

NREL, as part of the Play Fairway Analysis Retrospective, compiled and mapped publicly available geologic and geophysical data in relation to the 2008 USGS geothermal potential analysis. Included in this submission are maps displaying the publicly available data for LIDAR coverage, aeromagnetic coverage, gravity station locations, and geologic map coverage over the Western United States.

15 GEOTHERMAL ENERGY↗
DOE OSTI2024

Utah FORGE 5-2565: Evolution of Permeability and Strength Recovery of Shear Fractures Under Hydrothermal Conditions - 2024 Annual Workshop Presentation

This is a presentation on the Evolution of Permeability and Strength Recovery of Shear Fractures Under Hydrothermal Conditions by United States Geological Survey, presented by Tamara Jeppson. This video slide presentation, by the USGS, discusses the determination of how thermal, hydrologic, mechanical, and chemical (THMC) processes affect the sustainability of fracture networks in geothermal reservoirs. This includes (1) the qualification of rates of change of fracture properties, (2) the parameterization of modes of reaction, (3) the development of micromechanical and empirical fracture models, and (4) extended THMC models for laboratory- and reservoir-scale models. This presentation was featured in the Utah FORGE R&D Annual Workshop on August 15, 2024.

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

MODFLOW6 models used to evaluate potential stresses and hydrologic conditions driving water-level fluctuations in well ER-5-3-2, Frenchman Flat, Southern Nevada

The hydrograph for well ER-5-3-2 in Frenchman Flat, southern Nevada, has previously unexplained water-level fluctuations. Four, three-dimensional, groundwater models (MODFLOW 6) were developed to evaluate potential stresses and hydrologic conditions affecting the well ER-5-3-2 hydrograph. Four model scenarios were developed that simulated: (1) wellbore leakage without recharge, (2) wellbore leakage with recharge, (3) shallow (low transmissivity) and deep (high transmissivity) carbonate rocks, and (4) lateral heterogeneity of carbonate rocks. Input and output files for the four model scenarios are in the model and output directories, respectively. Hydraulic conductivity, specific storage, and wellbore-leakage rates (when simulated) were estimated with parameter estimation (PEST) by minimizing a weighted composite, sum-of-squares objective function. The objective function was informed by measurement and Tikhonov regularization observations. Measurement observations included drawdowns from the constant-rate aquifer test and water-level altitudes measured in well ER-5-3-2 from 2001-2021. Tikhonov regularization informed hydraulic conductivity and specific storage parameters that were insensitive to measurement observations, where homogeneity was the preferred relation. Batch files, executables, and MODFLOW 6, PEST, and post-processing utilities are in the ancillary directory. Supplementary data also are included in the ancillary directory, including site information, high-frequency water-level and aquifer-test data, transmissivity estimates, water-chemistry data, and water-temperature analyses. This USGS data release contains data, analyses, and model files for the simulations and analysis results described in U.S. Geological Survey Scientific Investigations Report (https://doi.org/10.3133/sir20225132).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Geospatial Data Platform for All

Spatiotemporal data has evolved in scale due to augmented use in cross-domain applications. Simultaneously, there is substantial growth in the availability of Geographic Information Systems (GIS) data provided by the United States Geological Survey (USGS) along with other federal, state, county, or local agencies through open-data portals and public access APIs. However, data availability does not equate with accessibility. Large-scale analyses and applications require robust, performant data management with co-location of data storage and computing. The insufficiency of data management infrastructure compels researchers to adopt ad hoc project- specific GIS data storage solutions (e.g., copying data to High-Performance computer file systems). As an ad hoc storage strategy does not scale, it hampers cross-domain analyses causing difficulty in data reuse and utilizing existing code bases. Furthermore, GIS data is complex and requires expertise to analyze and manipulate due to its intricate data structures and data-specific projection transformations. Despite the challenges, we recognize that derived GIS data products, e.g., satellite or LIDAR-based images, can be used in downstream applications such as AI by domain, but non-GIS experts. To address the data needs and overcome the challenges, we are working towards a GIS Data Platform focused on efficient data storage, data discovery and access, and an API to enable common workflows. We propose a knowledge-graph (KG) approach for data discovery, whereby datasets are semantically linked to higher- level constructs such as projects and research areas. The semantic data links enable researchers to explore datasets in a top-down approach by specifying relevant and meaningful terms (assists in finding hidden data). An advantage is that the nodes and edges in a knowledge graph create built-in semantic documentation. Deeper spatiotemporal connections between data sources can be encoded via Graph Neural Networks (GNN) (Zhang et al., 2021). The KG approach can be extended to integrate the data itself in a Virtual KG (VKG). Our work will derive inspiration from large-scale VKG efforts that have been undertaken or are currently underway as part of the OpenStreetMap project (Ding et al., 2021). For DOE Data Days, we share the proposed geospatial data platform hybrid (cloud/on-prem) architecture, our work-to-date on storing, retrieving, and transforming LiDAR and raster data relevant to two important NREL use-cases, including the Renewable Energy Potential (reV) Model, and present our proposal for a KG based data discovery engine.

data platform↗