Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Tracking Bandwidth”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Evaluation of 2 cognitive abilities tests in a dual-task environment

Most real world operators are required to perform multiple tasks simultaneously. In some cases, such as flying a high performance aircraft or trouble shooting a failing nuclear power plant, the operator's ability to time share or process in parallel" can be driven to extremes. This has created interest in selection tests of cognitive abilities. Two tests that have been suggested are the Dichotic Listening Task and the Cognitive Failures Questionnaire. Correlations between these test results and time sharing performance were obtained and the validity of these tests were examined. The primary task was a tracking task with dynamically varying bandwidth. This was performed either alone or concurrently with either another tracking task or a spatial transformation task. The results were: (1) An unexpected negative correlation was detected between the two tests; (2) The lack of correlation between either test and task performance made the predictive utility of the tests scores appear questionable; (3) Pilots made more errors on the Dichotic Listening Task than college students.

Vidulich, M. A.↗
NASA NTRS1991

Spatial acquisition and tracking for deep-space optical communication packages

The problem of acquiring and tracking a sun-lit earth, which poses a rather stringent demand on the design of the pointing acquisition and tracking subsystem for a deep-space optical communication package, is addressed. The acquisition subsystem must be capable of locating and tracking the receiver location based on a sun-lit earth image that is blurred by the point spread function of the imaging optics and spatially quantized by the detector pixels. Spatial tracking must be performed at bandwidths in excess of 1 kHz to effectively reject platform jitters. A simple solution of locating the earth limb shows a great potential for providing the necessary acquisition and tracking accuracy. By using separate acquisition and tracking detectors, the system can be implemented without extensive technology development. The slow bandwidth required for the acquisition process can be readily accomplished with an available CCD array, and an analog tracking loop can be implemented using a quadrant tracker and calibrated centroid tracking without the excessive computing overhead of the array detector-based spatial tracker.

Chen, Chien-Chung↗
NASA NTRS1984

Active Sticks: a New Dimension in Controller Design

A smart stick controller was built which actively produces a force to interact with the subject's hand and to aid in tracking. When the human tracks in this situation, the man-machine system can be viewed as the combination of two closed loop feedback paths. The inner loop occurs as a result of a tactile information channel effecting the man-controller interaction through force with this stick in the active mode (the stick generates a force) and the passive mode (the stick not generating a force) are reported. The most noteworthy observation is a significant increase in apparent neuromotor bandwidth and consequently better tracking performance.

Repperger, D. W.↗
NASA NTRS1977

Manchester transition tracking loop (MTTL)

In new tracking loop, separate phase detection algorithm is incorporated for acquisition; programmed acquisition-to-track sequence includes automatic bandwidth switching. Additionally, system has very effective phase detection signal-to-noise ratio and can operate at any rate by changing master clock frequency. All system parameters remain constant.

Cellier, A.↗
NASA NTRS1981

An analysis of radio interferometry with the block O system

The form and flow of information from signal reception to recorded bits at each station, through cross-correlation, phase-tracking, phase calibration, and bandwidth synthesis, to final observable formation are traced. In this process the data volume is greatly compressed for each observation, from approx. 10 to the 9th power bits on the station tapes to only four final observables: amplitude, delay, phase-delay rate and RF phase. After phase calibration and propagation media calibrations, the final delay observable is shown to be the sum of a geometric delay and a clock synchronization offset.

Thomas, J. B.↗
NASA NTRS1995

Carrier arraying: Revisited

Depending on the basis used for comparison, it is possible to predict different gains when applying carrier arraying to a conventional coherent receiver. In the past, the specific performance comparisons were made between the arrayed and nonarrayed cases assuming a fixed carrier-tracking closed-loop bandwidth. While the notion of loop bandwidth for the nonarrayed loop with a single input is well defined and meaningful, the comparable notion for an arrayed loop with multiple inputs is not uniquely defined since it depends on the knowledge of the statistical relation, e.g., degree of correlation, among the various antenna inputs. To circumvent the need for such knowledge, which is often not completely available, we suggest in this article an alternate criterion for comparing arrayed and nonarrayed loops, namely, fixed steady-state phase error, which, in the arrayed case, is independent of the statistical relation among the antenna inputs. We show that, in this case, the gain derived from carrier arraying is quite different from that obtained under the assumption of fixed-loop bandwidth, which suggests that one should exercise care when comparing arrayed and unarrayed loops in that the criterion used for comparison should be directly applicable to the situation at hand.

Simon, M. K.↗
NASA NTRS1996

LaserCom System Architecture With Reduced Complexity

Spatial acquisition and precision beam pointing functions are critical to spaceborne laser communication systems. In the present invention a single high bandwidth CCD detector is used to perform both spatial acquisition and tracking functions. Compared to previous lasercom hardware design, the array tracking concept offers reduced system complexity by reducing the number of optical elements in the design. Specifically, the design requires only one detector and one beam steering mechanism. It also provides means to optically close the point-ahead control loop. The technology required for high bandwidth array tracking was examined and shown to be consistent with current state of the art. The single detector design can lead to a significantly reduced system complexity and a lower system cost.

Lesh, James R.↗
NASA NTRS1994

Lasercom system architecture with reduced complexity

Spatial acquisition and precision beam pointing functions are critical to spaceborne laser communication systems. In the present invention, a single high bandwidth CCD detector is used to perform both spatial acquisition and tracking functions. Compared to previous lasercom hardware design, the array tracking concept offers reduced system complexity by reducing the number of optical elements in the design. Specifically, the design requires only one detector and one beam steering mechanism. It also provides the means to optically close the point-ahead control loop. The technology required for high bandwidth array tracking was examined and shown to be consistent with current state of the art. The single detector design can lead to a significantly reduced system complexity and a lower system cost.

Lesh, James R.↗
NASA NTRS1988

Telemetry SNR improvement using the DSN Advanced Receiver with results for Pioneer 10

A series of tracking tests was conducted in the spring of 1987 to demonstrate the reduced tracking threshold and the improved telemetry singal-to-noise-ratio performance of the DSN Advanced Receiver compared to current operational DSN systems. The Pioneer 10 spacecraft, which is now out of the solar system, was tracked on foud days. The Advanced Receiver achieved an improvement in telemetry SNR of 1 to 1.5 dB over the operational system. It was demonstrated that the spacecraft carrier signal is stable enough for tracking with a receiver carrier loop bandwidth of 0.5 Hz in the one-way mode and 0.1 Hz in the three-way mode, and that the Advanced Receiver is stable at 0.1 Hz. This reduces tracking threshold by 10 to 15 dB compared to current receivers, which have minimum loop bandwidths of 1 to 3 Hz. Thus, the Advanced Receiver will enable tracking of the Pioneer 10 spacecraft until its power source fails, circa 2000, which would not be possible with the current DSN system.

Hurd, W. J.↗
NASA NTRS1995

Towards optimum demodulation of bandwidth-limited and low SNR square-wave subcarrier signals

The optimum phase detector is presented for tracking square-wave subcarriers that have been bandwidth limited to a finite number of harmonics. The phase detector is optimum in the sense that the loop signal-to-noise ratio (SNR) is maximized and, hence, the rms phase tracking error is minimized. The optimum phase detector is easy to implement and achieves substantial improvement. Also presented are the optimum weights to combine the signals demodulated from each of the harmonics. The optimum weighting provides SNR improvement of 0.1 to 0.15 dB when the subcarrier loop SNR is low (15 dB) and the number of harmonics is high (8 to 16).

Feria, Y.↗
DOE OSTI2025

A Method for Estimation and Suppression of Quasi-Periodic Noise

Electromagnetic interference, particularly from sources such as light fixtures and power supplies, negatively affects the function and performance of electronic systems. This noise, often quasi-periodic in nature, contains harmonic structure that can be used for noise estimation and suppression. This work proposes a novel method for tracking and filtering such noise signals that reduces the comb filter bandwidth required for noise estimation and suppression by tracking the instantaneous frequency of the fundamental component.

42 ENGINEERING↗
NASA NTRS1984

Design and Performance of Sampled Data Loops for Subcarrier and Carrier Tracking

Design parameters and resulting performance are presented for the sampled data analogies of continuous time phase locked loops of second and third order containing perfect integrators. Expressions for noise equivalent bandwidth and steady state errors are given. Stability and gain margin are investigated using z plane root loci. Finally, an application is presented for Voyager subcarrier and carrier tracking under the dynamics of the encounters with Uranus and Neptune. For carrier tracking, loop bandwidth narrow enough for satisfactory loop signal to noise ratios can be achieved using third order loops without rate aiding, whereas second order loops would require aiding. For subcarrier tracking, third order loops can be used when the sampling rate is limited to approximately once per second, as in the Baseband Assembly, whereas second order loops sufficiently wide to track the dynamics have stability problems at that sampling rate.

Aguirre, S.↗
NASA NTRS1989

On the self-noise in QASK decision-feedback carrier tracking loops

Quadrature amplitude-shift keying (QASK) is often used for transmitting two digital data streams in bandwidth-constrained communication systems. Previous analyses of the tracking performance of a decision-feedback carrier tracking loop, which can be used to provide a carrier reference for a QASK signal set, have neglected the effects of the self-noise in the derivation of the loop resonance. The authors incorporate the effects of the self-noise into the analysis of decision-feedback carrier tracking loops. It is demonstrated that failure to account for the self-noise will only result in a conservative assessment of the system's performance, contrary to what might be expected. All results obtained are in closed form and can easily be evaluated numerically for performance prediction purposes.

Hinedi, Sami↗
NASA NTRS1980

Wideband Delta VLBI for deep space navigation

Developments in the area of deep space tracking and navigation during the last decade are briefly reviewed, and advantages offered by wideband differential Very Long Baseline Interferometry (Delta VLBI) are discussed. Delta VLBI data from a spacecraft and an angularly nearby extragalactic radio source promise to provide a factor of five improvement in deep space navigation accuracies as compared with those presently obtained by conventional radiometric tracking. Results of a restricted bandwidth demonstration of wideband Delta VLBI employing the Voyager spacecraft are analyzed.

Brown, D. S.↗
NASA NTRS1987

A closed-loop causal model of workload based on a comparison of fuzzy and crisp measurements techniques

Fuzzy and crisp measurements of workload are compared for a tracking task that varied in bandwidth and order of control. Fuzzy measures are as powerful as crisp measures, and can under certain conditions give extra insights into workload causality. Both methods suggest that workload arises in a system in which effort, performance, difficulty, and task variables are linked in a closed loop. Marked individual differences were found. Future work on the fuzzy measurement of workload is justified.

Moray, Neville↗
NASA NTRS1995

Functional relationships among monitoring performance: Subjective report of thought process and compromising states of awareness

A biocybernetic system for use in adaptive automation was evaluated using EEG indices based on the beta, alpha, and theta bandwidths. Subjects performed a compensatory tracking task while their EEG was recorded and one of three engagement indices was derived: beta/(alpha + theta), beta/alpha, or 1/alpha. The task was switched between manual and automatic modes as a function of the subjects' level of engagement and whether they were under a positive or negative feedback condition. It was hypothesized that negative feedback would produce more switches between manual and automatic modes, and that the beta/(alpha + theta) index would produce the strongest effect. The results confirmed these hypotheses. There were no systematic changes in these effects over three 16-minute trials. Tracking performance was found to be better under negative feedback. An analysis of the different EEG bands under positive and negative feedback in manual and automatic modes found more beta power in the positive feedback/manual condition and less in the positive feedback/automatic condition. The opposite effect was observed for alpha and theta power. The implications of biocybernetic systems for adaptive automation are discussed.

Freeman, Frederick↗