Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Temperature gradient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Evaluation of Temperature Gradient in Advanced Automated Directional Solidification Furnace (AADSF) by Numerical Simulation

A numerical model of heat transfer using combined conduction, radiation and convection in AADSF was used to evaluate temperature gradients in the vicinity of the crystal/melt interface for variety of hot and cold zone set point temperatures specifically for the growth of mercury cadmium telluride (MCT). Reverse usage of hot and cold zones was simulated to aid the choice of proper orientation of crystal/melt interface regarding residual acceleration vector without actual change of furnace location on board the orbiter. It appears that an additional booster heater will be extremely helpful to ensure desired temperature gradient when hot and cold zones are reversed. Further efforts are required to investigate advantages/disadvantages of symmetrical furnace design (i.e. with similar length of hot and cold zones).

Bune, Andris V.↗
NASA NTRS1998

Analysis of Curved Sandwich Panels Subjected to Combined Temperature Gradient and Mechanical Loads

The results of a detailed study of the nonlinear response of curved sandwich panels with composite face sheets and subjected to a temperature gradient through-the-thickness combined with mechanical loadings are presented. The analysis is based on a first-order shear-deformation Sanders-Budiansky type theory with the effects of large displacements, moderate rotations, transverse shear deformation and laminated anisotropic material behavior included. A mixed formulation is used with the fundamental unknowns consisting of the generalized displacements and the stress resultants of the panel. The nonlinear displacements, strain energy, principal strains, transverse shear stresses, transverse shear strain energy density, and their hierarchical sensitivity coefficients are evaluated. The hierarchical sensitivity coefficients measure the sensitivity of the nonlinear response to variations in the panel parameters, the effective properties of the face sheet layers and the core, and the micromechanical parameters. Numerical results are presented for cylindrical panels subjected to combined pressure loading, edge shortening or extension, edge shear and a temperature gradient through the thickness. The results show the effects of variations in the loading and the panel aspect ratio, on the nonlinear response and its sensitivity to changes in the various panel, effective layer and micromechanical parameters.

Noor, Ahmed K.↗
NASA NTRS1988

Internal temperature gradient of alloy semiconductor melts from interrupted growth experiments

Interrupted growth experiments on Hg(0.8)Cd(0.2)Se alloys were performed in an attempt to estimate the actual internal temperature gradient in the melt during directional solidification. The results have been analyzed in terms of a theoretical model which assumes an axial composition profile characteristic of diffusion controlled solute redistribution during growth. A comparison of the calculated and measured values suggests a reduction in the applied (empty furnace) temperature gradient by about a factor of three. Values of the interface segregation coefficient (k) determined from the phase diagram, predict values of solute concentration build up in the solid during growth interruptions which are inconsistent with measured results. It appears that the k values used tend to underestimate the actual k values for higher alloy compositions and overestimate k for the lower alloy compositions.

Andrews, R. N.↗
NASA NTRS1989

The effects of temperature gradient and growth rate on the morphology and fatigue properties of MAR-M246(Hf)

MAR-M246(Hf) is a nickel based superalloy used in the turbopump blades of the Space Shuttle main engines. The effects are considered of temperature gradient (G) and growth rate (R) on the microstructure and fatigue properties of this superalloy. The primary dendrite arm spacings were found to be inversely proportional to both temperature gradient and growth rate. Carbide and gamma - gamma prime morphology trends were related to G/R ratios. Weibull analysis of fatigue results shows the characteristic life to be larger by a factor of 10 for the low gradient/fast rate pairing of G and R, while the reliability (beta) was lower.

Schmidt, D. D.↗
NASA NTRS1978

Turbulent convection within rapidly rotating superadiabatic fluids with horizontal temperature gradients

A model is developed for small scale thermally driven turbulent convection in rapidly rotating systems. The Boussinesq equations of adiabatic and inviscid flow are perturbed about a basic state which is superadiabatic and which contains a horizontal temperature gradient balanced by a geostrophic wind. The growth rates and length scales of the most unstable modes are determined. It is found that these modes are either zonally or latitudinally symmetric, depending on the latitude and the horizontal temperature gradient. The transports of heat and momentum by the modes are computed. The linear amplitudes are assumed to be limited by shear instability. The model predicts a latitude dependent eddy diffusivity. The applicability of the model to astrophysical and planetary bodies is briefly discussed.

Flasar, F. M.↗
DOE OSTI2025

On the role of ion temperature gradient turbulence in driving ion thermal transport in neutral beam injection-heated L-mode plasmas in a superconducting tokamak

In this paper, we report a detailed experimental study of the role of ion-temperature-gradient driven turbulence in driving ion thermal transport in neutral beam injection (NBI)-heated L-mode plasmas in Experimental Advanced Superconducting Tokamak (EAST) (Wan et al 2000 Nucl. Fusion 40 1057) coupled with linear and nonlinear gyrokinetic simulations. Significant ion-scale turbulence k ⟂ < cm −1 (k ⟂ < 1.5, where k ⟂ where is the perpendicular wavenumber and ρ s is the ion gyroradius calculated using local electron temperature T e ), measured with a microwave reflectometer, is observed in the plasma core at for r/a ≈ 0.265 and 0.5 (where r is half the diameter of the closed flux surface at a given radial position, and a is half the diameter of the last closed flux surface). Local linear stability analysis with experimental equilibrium quantities at these two radial locations using the GS2 gyrokinetic code shows that the most unstable ion-scale micro-instability is the ion temperature gradient (ITG) mode. Since the computed maximum ion-scale linear growth rates are larger than the local Waltz-Miller E × B shearing rate (Waltz and Miller 1999 Phys. Plasmas 6 4265), the E × B shear is unable to suppress ion-scale turbulence, consistent with the experimental observation of ion-scale turbulence. Experimental ion and electron thermal transports, calculated with power balance analysis, are both anomalous with ion thermal transport being the dominant channel. Nonlinear gyrokinetic simulations using the electrostatic global particle-in-cell gyrokinetic tokamak simulation (GTS) code (Weixing Wang et al 2010 Phys. Plasmas 17 072511) show good quantitative agreement between predicted ion thermal transport and that from the power balance analysis. These results demonstrate for the first time the important role of ITG turbulence in driving thermal transport in NBI-heated L-mode plasmas in EAST, showing the effectiveness of GTS code in simulating electrostatic turbulence in EAST and the need of suppressing ITG turbulence to improve energy confinement in EAST.

Sun, P. J. [Chinese Academy of Sciences (CAS), Hef↗
NASA NTRS1992

Experimental study of plate buckling induced by spatial temperature gradients

An experimental study of plate buckling induced by spatial temperature gradients is described. A rectangular Hastelloy-X panel is subjected to local line heating by a focused quartz heat lamp. Two parallel panel edges are maintained at constant temperature by coolant flow. Point supports provide well-defined thermal-structural boundary conditions. Test results from transient elastic and inelastic tests demonstrate that substantial panel bending occurs due to initial panel warpage and thermally induced membrane compressive stresses.

Thornton, Earl A.↗
NASA NTRS1978

Effects of solid-propellant temperature gradients on the internal ballistics of the Space Shuttle

The internal ballistic effects of combined radial and circumferential grain temperature gradients are evaluated theoretically for the Space Shuttle solid rocket motors (SRMs). A simplified approach is devised for representing with closed-form mathematical expressions the temperature distribution resulting from the anticipated thermal history prior to launch. The internal ballistic effects of the gradients are established by use of a mathematical model which permits the propellant burning rate to vary circumferentially. Comparative results are presented for uniform and axisymmetric temperature distributions and the anticipated gradients based on an earlier two-dimensional analysis of the center SRM segment. The thrust imbalance potential of the booster stage is also assessed based on the difference in the thermal loading of the individual SRMs of the motor pair which may be encountered in both summer and winter environments at the launch site. Results indicate that grain temperature gradients could cause the thrust imbalance to be approximately 10% higher in the Space Shuttle than the imbalance caused by SRM manufacturing and propellant physical property variability alone.

Sforzini, R. H.↗
NASA NTRS2009

Thermal Considerations for Meeting 20 C and Stringent Temperature Gradient Requirements of IXO SXT Mirror Modules

The Soft X-Ray Telescope (SXT) is an instrument on the International X-Ray Observatory (IXO). Its flight mirror assembly (FMA) has a single mirror configuration that includes a 3.3 m diameter and 0.93 m tall mirror assembly. It consists of 24 outer modules, 24 middle modules and 12 inner modules. Each module includes more than 200 mirror segments. There are a total of nearly 14,000 mirror segments. The operating temperature requirement of the SXT FMA is 20 C. The spatial temperature gradient requirement between the FMA modules is 1 C or smaller. The spatial temperature gradient requirement within a module is 0.5 C. This paper presents thermal design considerations to meet these stringent thermal requirements.

Choi, Michael K.↗
DOE OSTI2024

Limit cycle oscillations in the zonal-flow-catalyzed interactions of ion-temperature-gradient turbulence

Limit-cycle oscillations are studied for ion temperature gradient turbulence, which, in the absence of large diamagnetic (mean) shear flows, saturates through energy transfer from unstable modes to large-scale stable modes via zonal-flow intermediary modes. Oscillations of zonal flow and turbulence levels are strongly constrained by the reactive, largely non-dissipative character of the zonal flows. Since existing predator–prey models for observed oscillations in experiments do not include energy transfer through zonal flows to stable modes, low-order fluid models with this physics are constructed and investigated. A simple three-wave truncation produces low-amplitude zonal flows that slowly oscillate around a zero mean, with turbulence oscillations between coupled wavenumbers that exceed linear frequencies by orders of magnitude. This inconsistency with experimental observations is caused by the weak non-linear drive of zonal flows in three-wave systems and the lack of multiple-wavenumber turbulent interactions. A more comprehensive model that preserves multiple wavenumber interactions within the context of conservative zonal-flow-mediated energy transfer to stable modes accurately reflects observed dynamics when the phase between stable and unstable modes is occasionally randomized.

Li, P. -Y. (ORCID:0000000295254171)↗
NASA NTRS1979

Temperature-gradient oven

Tubular oven operates on principle of lengthwise linear temperature gradient of homogeneous conductive rod in absence of radiative or convective heat loss. Oven can be applied to controlled heating or cooling of test specimens.

Jue, S.↗
NASA NTRS1982

The effect of small temperature gradients on flow in a continuous flow electrophoresis chamber

Continuous flow electrophoresis employs an electric field to separate biological cells suspended in a flowing liquid buffer solution. Good separations based on differences in electrophoretic mobility are obtained only when a unidirectional flow is maintained. The desired flow has a parabolic structure in the narrow dimension of the chamber and is uniform acros the width, except near the edges where the no-slip condition prevails. However, because of buoyancy, very small laterall or axial temperature gradients deform the flow significantly. The results of experiments conducted with a specially instrumented chamber show the origin and structure of the buoyancy-driven perturbations. It is found that very small temperature gradients can disturb the flow significantly, as was predicted by earlier theoretical work.

Rhodes, P. H.↗