Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TRANSITION TEMPERATURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Artificial High-Transition Temperature Superconductors

In this work, we have used the well-understood quantum Hall (QH) stripes in high quality two-dimensional electron gases to mimic charge stripes in high transition temperature (Tc) superconductors. The science question we want to address is “Can QH stripes mimic high Tc superconductor stripes and provide a controlled experimental setup to pin-down the role of stripes in high Tc superconductivity?”. We have observed anomalous superconducting transition like behavior in GaAs double quantum well systems (DQWs) when each quantum well (QW) is tuned to the charge stripe states but with different Landau level fillings. Furthermore, we have shown that the transition like behavior is sharper in the DQWs when the two QWs are more strongly coupled. Our results suggest, for the first time, experimental evidence of the paired charge stripes model, which might lead to room-temperature superconductors that have enormously wide applications in computing, energy, and transportation industries. Advancing the science of high transition temperature superconductivity will have a profound impact in advancing energy technologies, ranging from the next generation microchips, new energy transfer grid to public transportation, and thus is important to nation’s energy security and relevant across the landscape of many mission spaces. Sandia has been a leader in materials science research and development. The proposed research takes advantage of Sandia’s state-ofthe-art MBE facilities at the Center for Integrated Nanotechnologies (CINT) and utilizes Sandia’s extensive advanced materials characterization resources. We envision a significant impact on the nation’s energy research and security challenges by investing in this research.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Tuning the Superconducting Transition Temperature of Co-sputtered Iridium and Platinum Films

A superconducting film with a tunable low transition temperature (Tc) is required in high-resolution Transition-Edge Sensor (TES) detectors, which have applications including dark matter detection, low threshold coherent elastic neutrino nucleus scattering measurement, and X-ray spectroscopy. We have been investigating a new approach to tune the Tc of superconducting thin films fabricated by co-sputtering Iridium and Platinum. The effects of Pt concentration and deposition parameters on the films' structural, electrical, and superconducting properties have been studied. AFM and XRD techniques and low temperature resistance measurements have been utilized for film characterization. By varying the Pt concentration and deposition parameters when co-sputtering, we have successfully achieved controllable tuning of Tc in the range of 30-200 mK. The experimental results demonstrate co-sputtering as a viable method for controlling the Tc of Ir-based thin films that can be applied to fabricating high-resolution TESs.

Yefremenko, V. G.↗
DOE OSTI2026

A simple Rice-Ashby ductile–brittle transition temperature (DBTT) model based on dislocation mobility for body-centered cubic complex concentrated alloys

A simple Rice-Ashby type model for ductile–brittle transition temperature (DBTT) of body-centered cubic (bcc) complex concentrated alloys (structures) is presented. The effect of accumulation of dislocation density on DBTT is also analyzed. The model results are compared with experimental yield stress vs. temperature data for four complex concentrated alloys: Nb 45 Ta 25 Ti 15 Hf 15 (NTTH), MoNbTaW, HfNbTaTiZr, NbTiZr and two pure bcc metals, Fe and W. It is shown that the DBTT behavior of these alloys and pure metals are in agreement with the simple ductility model presented in this manuscript. The DBTT model presented in this manuscript along with yield strength models for bcc complex concentrated alloys described in the literature should serve as a useful guide for designing such alloys with good high temperature strength and significant room temperature ductility.

Crack tip processes↗
DOE OSTI2025

Translational diffusion in supercooled water at and near the glass transition temperature—136 K

The properties of amorphous solid water at and near the calorimetric glass transition temperature, T g , of 136 K have been debated for years. One hypothesis is that water turns into a “true” liquid at T g (i.e., it becomes ergodic) and exhibits all the characteristics of an ergodic liquid, including translational diffusion. A competing hypothesis is that only rotational motion becomes active at T g , while the “real” glass transition in water is at a considerably higher temperature. To address this dispute, we have investigated the diffusive mixing in nanoscale water films, with thicknesses up to ∼100 nm, using infrared (IR) spectroscopy. The experiments used films that were composed of at least 90% H 2 O with D 2 O making up the balance and were conducted under conditions where H/D exchange was essentially eliminated. Because the IR spectra of multilayer D 2 O films (e.g., thicknesses of ∼3–6 nm) embedded within thick H 2 O films are distinct from the spectrum of isolated D 2 O molecules within H 2 O, the diffusive mixing of (initially) isotopically layered water films could be followed as a function of annealing time and temperature. The results show that water films with total thicknesses ranging from ∼20 to 100 nm diffusively mixed prior to crystallization for temperatures between 120 and 144 K. The translational diffusion had an Arrhenius temperature dependence with an activation energy of 40.8 ± 3.5 kJ/mol, which indicates that water at and near T g is a strong liquid. The measured diffusion coefficient at 136 K is 6.25 ± 1.4 × 10 −21 m 2 /s.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1999

Measurements of Tc (Q,P): Depression of the Superfluid Transition Temperature by a Heat Current Along the Lambda Line

We report experimental measurements of Tc (Q,P) for heat currents (Q) between I1and 100 micro W/sq cm and pressure (P) between SVP and 15 bar. The measurements were performed in a normal gravity environment, using the low-gravity simulator facility at JPL without the magnet being energized. The sample pressure was controlled to 0.1 micro bar using a hot volume, and a Straty-Adams capacitive pressure gauge. The total volume of helium in the sample cell and the hot volume was held constant using a pneumatic low temperature valve. A melting curve thermometer (MCT) measured the transition temperature (Tc) with a resolution of about 10 nK through a sidewall probe of the thermal conductivity sample cell. We employed the same measurement technique and procedure described by DAS. Preliminary results indicate that Tc (Q,P) depends very little on the pressure in the pressure range between SVP and 15 bar with a variation in the amplitude of Tc(Q,P) of less than about 5% observable in this pressure range. According to the Renormalization-group theory calculation by Haussmann and Dohm, the amplitude of Tc (Q,P) has a leading pressure-dependence term proportional to xi(sub 0) (sup (1/nu)), where xi(sub 0) is the correlation-length amplitude and nu is the correlation-length exponent. Thus, a small pressure dependence of the amplitude of Tc (Q,P) is expected since xi(sub 0) is very weakly dependent on pressure between SVP and 15 bar, consistent with our measurements.

Liu, Yuan-Ming↗
NASA NTRS2004

Deformation, Stress Relaxation, and Crystallization of Lithium Silicate Glass Fibers Below the Glass Transition Temperature

The deformation and crystallization of Li(sub 2)O (center dot) 2SiO2 and Li(sub 2)O (center dot) 1.6SiO2 glass fibers subjected to a bending stress were measured as a function of time over the temperature range -50 to -150 C below the glass transition temperature (Tg). The glass fibers can be permanently deformed at temperatures about 100 C below T (sub)g, and they crystallize significantly at temperatures close to, but below T,, about 150 C lower than the onset temperature for crystallization for these glasses in the no-stress condition. The crystallization was found to occur only on the surface of the glass fibers with no detectable difference in the extent of crystallization in tensile and compressive stress regions. The relaxation mechanism for fiber deformation can be best described by a stretched exponential (Kohlrausch-Williams-Watt (KWW) approximation), rather than a single exponential model.The activation energy for stress relaxation, Es, for the glass fibers ranges between 175 and 195 kJ/mol, which is considerably smaller than the activation energy for viscous flow, E, (about 400 kJ/mol) near T, for these glasses at normal, stress-free condition. It is suspected that a viscosity relaxation mechanism could be responsible for permanent deformation and crystallization of the glass fibers below T,

Ray, Chandra S.↗
NASA NTRS1999

Low-Cost, High Glass-Transition Temperature, Thermosetting Polyimide Developed

PMR-15 polyimide, developed in the mid-1970's at the NASA Lewis Research Center, is recognized as a state-of-the-art high-temperature resin for composite applications in the temperature range of 500 to 550 F (260 to 288 C). PMR-15 offers easy processing and good property retention at a reasonable cost. For these reasons, it is widely used in both military and commercial aircraft engine components. Traditionally, polyimide composites have been designed for long-term use at 500 to 600 F over thousands of hours. However, new applications in reusable launch vehicles (RLV's) require lightweight materials that can perform for short times (tens of hours) at temperatures between 800 and 1000 F (425 and 538 C). Current efforts at Lewis are focused on raising the use temperature of polyimide composites by increasing the glass-transition temperature of the matrix resins. Achieving this dramatic increase in the upper use temperature without sacrificing polymer and composite processability is a major technical challenge.

Chuang, Kathy C.↗
DOE OSTI2021

Effect of Microstructure on Chain Flexibility and Glass Transition Temperature of Polybenzofulvene

Polybenzofulvene (PBF) is a polydiene with a very high glass transition temperature (T g ), which makes it a potential candidate for use as the hard block for high-temperature thermoplastic elastomer applications. The T g s of polydienes are known to be related to chain flexibility. However, no studies have been reported that correlate the chain flexibility to the microstructure of PBF. Herein, we present a study of solution properties of linear PBFs with narrow molecular weight dispersity and having 1,2-addition ranging from 23% to 99%. The materials were prepared by living anionic polymerization under different conditions. Specifically, the chain flexibility as defined by the Flory's characteristic ratio, , and dependence of chain flexibility on microstructure by combined measurements of intrinsic viscosity and molecular weight using triple-detector size exclusion chromatography (SEC) is studied. The persistence lengths (l p ) and chain diameters (d B ) were also estimated using the touched-bead wormlike chain model. To the best of our knowledge, the characteristic ratio of PBF is found to be the highest of all polydienes that have been reported so far.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Random copolymer of poly(polyethylene glycol methyl ether)methacrylate as tunable transition temperature solid-solid phase change material for thermal energy storage

Polymer based phase change materials (PCM) for thermal energy storage (TES) applications have gained some attention recently due to their high stability and potential solid to solid phase transition. In this work, we are the first to utilize a simple copolymerization strategy for static tunability transition temperature (T t ) of polymeric PCM. The copolymerization between short and long side chain polyethylene glycol based methacrylate polymers was designed to tune T t with minimum impact on their energy density. Polarized optical microscope and x-ray techniques were also used to understand the relationship between crystal structure and T t of different copolymer composition which was discussed in the context. The solid to solid transition polymeric PCM were successfully developed with tunable T t ranged from 18 °C to 35 °C which is suitable toward building envelop applications.

14 SOLAR ENERGY↗
NASA NTRS1971

Fluctuation induced conductivity of superconductors above the transition temperature: Regularization of the Maki diagram

The Maki contribution to the conductivity above the superconducting transition temperature is regularized within the framework of the BCS theory. This is achieved through the renormalization of the impurity scattering vertex by inclusion of the effects of pair fluctuations. The conductivity is evaluated for a thin film. It depends only on the reduced temperature and the normal resistance per square. Fair agreement is found with Al films over a wide temperature range. Agreement is not found with experiments on Bi, Pb and Ga films, which apparently contain a strong additional pair-breaking effect. The temperature range in which interactions among fluctuations become important in the Maki conductivity is generally larger than that given by the Ginzburg criterion.

Keller, J.↗
NASA NTRS1971

Effect of uniaxial stress on the superconducting transition temperature of monocrystalline Nb3Sn.

Measurements have been made of the stress dependence of the superconducting transition temperature (T sub c) of single crystals of Nb3Sn oriented in the (001) direction. The magnitude of the stress dependence of T sub c is about 1000 times larger than that generally observed for elemental superconductors. The results further imply that below the tetragonal transformation temperature (T sub m), the crystal consists of tetragonal domains with variable orientation of the c axis and that the domain configuration and T sub c depend on the applied stress at T sub m.

Mcevoy, J. P.↗