Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TRACE AMOUNTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Lunar Impact Melt Crystallization Produces Reflectance Spectra Dominated By Clinopyroxene Signatures: Implications for the Origin of Pink Spinel Anorthosite

Magma-wallrock interaction and impact melt crystallization are the two leading hypotheses for the formation of orbitally detected lunar “pink” spinel anorthosite (PSA) [1-3]. Distinguishing among hypotheses is complicated because both require mixing of anorthositic crust and MgO-rich ultramafic components. Models for PSA formation need to account for either the thermodynamic hurdles of crustal assimilation, or the size of impactor and composition of target material needed to generate spinel during crater and basin formation. Determining whether the energy source is endogenic or exogenic is important for understanding the thermal and chemical evolution of the lunar crust. Here we test the impact melt hypothesis by performing controlled cooling experiments on two hypothetical impact melt compositions. The compositions represent mixing of ultramafic magma and anorthositic crust in molar ratios of approximately 50:50 and 25:75. Synthetic crystallized assemblages were prepared for chemical analysis and bidirectional reflectance spectroscopy in the visible to near-infrared wavelengths. All crystallization experiments contained plagioclase, olivine, and clinopyroxene, but trace amounts of spinel were only observed in the 50:50 mix. The experimental spinel is similar to the compositions inferred from remote observations. However, the high-Ca pyroxene in our experimental assemblages (9 – 18 wt.%) resulted in 1 and 2 µm absorption band center positions consistent with synthetic clinopyroxene. The clinopyroxene absorptions are present regardless of specific mineral modes and the presence of either olivine or spinel. These results suggest that impact melt crystallization will produce clinopyroxene-bearing lithologies, the presence of which masks spectral contributions from coexisting spinel and olivine. Assuming that the trace amounts of spinel observed in our experiments could be concentrated and isolated from the mafic silicates by convection or density settling in the impact melt sheet, the spinel-rich areas would still be proximally associated with the remaining silicate-dominated assemblage exhibiting strong clinopyroxene spectral signatures. We conclude that impact melting of the lunar crust can explain rare cases of PSA in association with clinopyroxene. Previous investigations of magma-wallrock interactions [2] demonstrate that small plagioclase-contaminated regions of an ultramafic intrusion can concentrate spinel whereas larger portions of the same intrusion remain relatively uncontaminated and yield olivine and orthopyroxene, consistent with the more common occurrence of PSAs in association with orthopyroxene ±olivine in the remote sensing database (e.g., Moscoviense Basin) [4].

petrology↗

Terahertz biosensing with a graphene-metamaterial heterostructure platform

Terahertz (THz) radiation attracted great interest in the fields of material characterization, nondestructive security screening, clinical diagnostics, and identification of chemicals and molecules. Label-free THz sensing of trace amount of targets including biomolecules is promising because of their rich spectral fingerprint in this electromagnetic region; however, improving the sensitivity remains to be a challenge, partially due to the limitations of THz sources and detectors. The resonantly enhanced electromagnetic fields in metamaterials and metasurfaces offer a potentially viable solution, although highly complicated decoration process is still needed for biosensing on the surface of metamaterials. Here we demonstrate a simple biosensing platform by integrating a monolayer graphene on a THz metamaterial absorber cavity, where the introduction of sensing targets results in a large change of the metamaterial resonant absorption (or reflection) because of their strong interaction with graphene. We experimentally show its ultrahigh sensitivity through detecting trace amount of chlorpyrifos methyl down to 0.2 ng. Furthermore, using simple decoration steps and utilizing DNA to capture thrombin, we further show the feasibility of this platform serving as a sensitive biosensor.

47 OTHER INSTRUMENTATION↗

Mouthpart conduit sizes of fluid-feeding insects determine the ability to feed from pores

Fluid-feeding insects, such as butterflies, moths, and flies (20% of all animal species), are faced with the common selection pressure of having to remove and feed on trace amounts of fluids from porous surfaces. Insects able to acquire fluids that are confined to pores during drought conditions would have an adaptive advantage and increased fitness over other individuals. Here we performed feeding trials using solutions with magnetic nanoparticles to show that butterflies and flies have mouthparts adapted to pull liquids from porous surfaces using capillary action as the governing principle. In addition, the ability to feed on the liquids collected from pores depends on a relationship between the diameter of the mouthpart conduits and substrate pore size diameter; insects with mouthpart conduit diameters larger than the pores cannot successfully feed, thus there is a limiting substrate pore size from which each species can acquire liquids for fluid uptake. In conclusion, given that natural selection independently favored mouthpart architectures that support these methods of fluid uptake (Diptera and Lepidoptera share a common ancestor 280 mya that had chewing mouthparts), we suggest that the convergence of this mechanism advocates this as an optimal strategy for pulling trace amounts of fluids from porous surfaces.

59 BASIC BIOLOGICAL SCIENCES↗

Visible Light Photoreduction of CO{sub 2} Using CdSe/Pt/TiO{sub 2} Heterostructured Catalysts

A series of CdSe quantum dot (QD)-sensitized TiO{sub 2} heterostructures have been synthesized, characterized, and tested for the photocatalytic reduction of CO{sub 2} in the presence of H{sub 2}O. Our results show that these heterostructured materials are capable of catalyzing the photoreduction of CO{sub 2} using visible light illumination (λ > 420 nm) only. The effect of removing surfactant caps from the CdSe QDs by annealing and using a hydrazine chemical treatment have also been investigated. The photocatalytic reduction process is followed using infrared spectroscopy to probe the gas-phase reactants and gas chromatography to detect the products. Gas chromatographic analysis shows that the primary reaction product is CH{sub 4}, with CH{sub 3}OH, H{sub 2}, and CO observed as secondary products. Typical yields of the gas-phase products after visible light illumination (λ>420 nm) were 48 ppm g{sup -1} h{sup -1} of CH{sub 4}, 3.3 ppm g{sup -1} h{sup -1} of CH{sub 3}OH (vapor), and trace amounts of CO and H{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dual-comb spectroscopy of laser-induced plasmas

Dual-comb spectroscopy has become a powerful spectroscopic technique in applications that rely on its broad spectral coverage combined with high frequency resolution capabilities. Experiments to date have primarily focused on detection and analysis of multiple gas species under semi-static conditions, with applications ranging from environmental monitoring of greenhouse gases to high resolution molecular spectroscopy. Here, we utilize dual-comb spectroscopy to demonstrate broadband, high-resolution, and time-resolved measurements in a laser induced plasma for the first time. As a first demonstration, we simultaneously detect trace amounts of Rb and K in solid samples with a single laser ablation shot, with transitions separated by over 6 THz (13 nm) and spectral resolution sufficient to resolve isotopic and ground state hyperfine splittings of the Rb D 2 line. This new spectroscopic approach offers the broad spectral coverage found in the powerful techniques of laser-induced breakdown spectroscopy (LIBS) while providing the high-resolution and accuracy of cw laser-based spectroscopies.

Frequency comb↗

Preservation of H 2 production activity in nanoporous latex coatings of Rhodopseudomonas palustris CGA009 during dry storage at ambient temperatures: Preservation of R.palustris latex coatings

To assess the applicability of latex cell coatings as an ‘off-the-shelf’ biocatalyst, the effect of osmoprotectants, temperature, humidity and O 2 on preservation of H 2 production in Rhodopseudomonas palustris coatings was evaluated. Immediately following latex coating coalescence (24 h) and for up to 2 weeks of dry storage, rehydrated coatings containing different osmoprotectants displayed similar rates of H 2 production. Beyond 2 weeks of storage, sorbitol-treated coatings lost all H 2 production activity, whereas considerable H 2 production was still detected in sucrose- and trehalose-stabilized coatings. We stored the coatings at a relative humidity level which significantly impacts the recovery and subsequent rates of H 2 production. After 4 weeks storage under air at 60% humidity, coatings produced only trace amounts of H 2 (0–0.1% headspace accumulation), whereas those stored at < 5% humidity retained 27–53% of their H 2 production activity after 8 weeks of storage. Furthermore, when stored in argon at < 5% humidity and room temperature, R. palustris coatings retained full H 2 production activity for 3 months, implicating oxidative damage as a key factor limiting coating storage. Ultimately, the results demonstrate that biocatalytic latex coatings are an attractive cell immobilization platform for preservation of bioactivity in the dry state.

09 BIOMASS FUELS↗

Efficient Nighttime Biogenic SOA Formation in a Polluted Residual Layer

Abstract Organic nitrates formed from nighttime reaction between anthropogenic nitrate radicals (NO3) and biogenic volatile organic compounds (BVOCs) are potentially an important but highly uncertain source of secondary organic aerosol (SOA). Here we report on the enhanced nighttime biogenic SOA formation observed in a polluted residual layer over Sacramento, California, the morning of 15 June 2010 during the Carbonaceous Aerosols and Radiative Effects Study (CARES). Trajectory analysis showed that the residual layer air, containing trace amounts of isoprene and monoterpenes left over after nighttime oxidation, was influenced by the San Francisco Bay Area emissions the previous evening. The residual layer aerosol was also enriched in nitrate, with about 64% of it estimated to be in the form of organic nitrates. The nitrate:organic mass ratio of the SOA was about 0.47±0.044, which corresponds to the range typically found in isoprene mononitrates. Assuming the SOA was composed of organic mononitrates, its nominal molecular weight was estimated at 186±11 g mol-1, consistent with the highly functionalized isoprene hydroxynitrates that have been observed in the particle phase in the southeast United States. Overall, our findings show that the efficiency of nighttime biogenic SOA formation, expressed as the change in organic aerosol mass relative to carbon monoxide (?OA/?CO), was about 100 µg m-3 ppmv, which falls in the range 77-157 µg m-3 ppmv previously estimated for enhanced daytime SOA formation from mixed anthropogenic and biogenic emissions during CARES.

Zaveri, Rahul A.↗

Eugenol specialty chemical production in transgenic poplar ( Populus tremula × P. alba ) field trials

Summary A foundational study assessed effects of biochemical pathway introduction into poplar to produce eugenol, chavicol, p ‐anol, isoeugenol and their sequestered storage products, from potentially available substrates, coniferyl and p ‐coumaryl alcohols. At the onset, it was unknown whether significant carbon flux to monolignols vs. other phenylpropanoid (acetate) pathway metabolites would be kinetically favoured. Various transgenic poplar lines generated eugenol and chavicol glucosides in ca . 0.45% (~0.35 and ~0.1%, respectively) of dry weight foliage tissue in field trials, as well as their corresponding aglycones in trace amounts. There were only traces of any of these metabolites in branch tissues, even after ~4‐year field trials. Levels of bioproduct accumulation in foliage plateaued, even at the lowest introduced gene expression levels, suggesting limited monolignol substrate availability. Nevertheless, this level still allows foliage collection for platform chemical production, with the remaining (stem) biomass available for wood, pulp/paper and bioenergy product purposes. Several transformed lines displayed unexpected precocious flowering after 4‐year field trial growth. This necessitated terminating (felling) these particular plants, as USDA APHIS prohibits the possibility of their interacting (cross‐pollination, etc.) with wild‐type (native plant) lines. In future, additional biotechnological approaches can be employed (e.g. gene editing) to produce sterile plant lines, to avoid such complications. While increased gene expression did not increase target bioproduct accumulation, the exciting possibility now exists of significantly increasing their amounts (e.g. 10‐ to 40‐fold plus) in foliage and stems via systematic deployment of numerous ‘omics’, systems biology, synthetic biology and metabolic flux modelling approaches.

59 BASIC BIOLOGICAL SCIENCES↗

As-Received, Ozone Cleaned and Ar+ Sputtered Surfaces of Hafnium Oxide Grown by Atomic Layer Deposition and Studied by XPS

In this study, X-ray photoelectron spectroscopy (XPS) characterization was performed on 47 nm thick hafnium oxide (HfO{sub 2}) films grown by atomic layer deposition using TEMA-Hf/H{sub 2}O at 250 C substrate temperature. HfO{sub 2} is currently being studied as a possible replacement for Silicon Oxide (SiO{sub 2}) as a gate dielectric in electronics transistors. XPS spectra were collected on a Physical Electronics Quantum 2000 Scanning ESCA Microprobe using a monochromatic Al K{sub a} X-ray (1486.7 eV) excitation source. The sample was analyzed under the following conditions: as received, after UV irradiation for five minutes, and after sputter cleaning with 2 kV Ar{sup +} ions for 180 seconds. Survey scans showed carbon, oxygen, and hafnium as the major species in the film, while the only minor species of argon and carbide was detected after sputtering. Adventitious carbon initially composed approximately 18.6 AT% of the surface, but after UV cleaning it was reduced to 2.4 AT%. This demonstrated that that the majority of carbon was due to adventitious carbon. However, after 2 kV Ar{sup +} sputtering there was still only trace amounts of carbon at {approx}1 AT%, Some of this trace carbon is now in the form of a carbide due to the interaction with Ar{sup +} used for sputter cleaning. Furthermore, the stoiciometric ratio of oxygen and hafnium is consistent with a high quality HfO{sub 2} film.

36 MATERIALS SCIENCE↗

(90377) SEDNA: INVESTIGATION OF SURFACE COMPOSITIONAL VARIATION

The dwarf planet (90377) Sedna is one of the most remote solar system objects accessible to investigations. To better constrain its surface composition and to investigate the possible heterogeneity of the surface of Sedna, several observations have been carried out at ESO-VLT with the powerful spectrometer SINFONI observing simultaneously the H and K bands. The analyzed spectra (obtained in 2005, 2007, and 2008) show a non-uniform spectral signature, particularly in the K band. Spectral modeling using the Shkuratov radiative transfer code for surface scattering has been performed using the various sets of data, including previous observations at visible wavelengths and photometry at 3.6 and 4.5 {mu}m by the Spitzer Space Telescope. The visible and near-infrared spectra can be modeled with organic materials (triton and titan tholin), serpentine, and H{sub 2}O ice in fairly significant amounts, and CH{sub 4}, N{sub 2}, and C{sub 2}H{sub 6} in varying trace amounts. One of the spectra obtained in 2005 October shows a different signature in the K band and is best modeled with CH{sub 3}OH in place of CH{sub 4}, with reduced amounts of serpentine and with the addition of olivine. The compositional surface heterogeneity can give input on the past history as well clues to the origin of this peculiar, distant object.

79 ASTRONOMY AND ASTROPHYSICS↗

Nitrogen stabilized reactive sputtering of optimized TiO{sub 2-x} photocatalysts with visible light reactivity

Photoreactive and visible light responsive nonstoichiometric mixed-phase titania was prepared by reactive direct current magnetron sputtering. Trace amounts of nitrogen were added for process stabilization without being incorporated into the films. Based on the CO{sub 2} photoreduction tests and structural and optical characterization, the influence of the trace nitrogen on the sputtered nonstoichiometric TiO{sub 2} was studied and was compared to nitrogen-doped titania.

36 MATERIALS SCIENCE↗

Grazing exit versus grazing incidence geometry for x-ray absorption near edge structure analysis of arsenic traces

In the presented study the grazing exit x-ray fluorescence was tested for its applicability to x-ray absorption near edge structure analysis of arsenic in droplet samples. The experimental results have been compared to the findings of former analyses of the same samples using a grazing incidence (GI) setup to compare the performance of both geometries. Furthermore, the investigations were accomplished to gain a better understanding of the so called self-absorption effect, which was observed and investigated in previous studies using a GI geometry. It was suggested that a normal incidence-grazing-exit geometry would not suffer from self-absorption effects in x-ray absorption fine structure (XAFS) analysis due to the minimized path length of the incident beam through the sample. The results proved this assumption and in turn confirmed the occurrence of the self-absorption effect for GI geometry. Due to its lower sensitivity it is difficult to apply the GE geometry to XAFS analysis of trace amounts (few nanograms) of samples but the technique is well suited for the analysis of small amounts of concentrated samples.

36 MATERIALS SCIENCE↗

Biodistribution of the GATA-3-specific DNAzyme hgd40 after inhalative exposure in mice, rats and dogs

The DNAzyme hgd40 was shown to effectively reduce expression of the transcription factor GATA-3 RNA which plays an important role in the regulation of Th2-mediated immune mechanisms such as in allergic bronchial asthma. However, uptake, biodistribution and pharmacokinetics of hgd40 have not been investigated yet. We examined local and systemic distribution of hgd40 in naive mice and mice suffering from experimental asthma. Furthermore, we evaluated the pharmacokinetics as a function of dose following single and repeated administration in rats and dogs. Using intranasal administration of fluorescently labeled hgd40 we demonstrated that the DNAzyme was evenly distributed in inflamed asthmatic mouse lungs within minutes after single dose application. Systemic distribution was investigated in mice using radioactive labeled hgd40. After intratracheal application, highest amounts of hgd40 were detected in the lungs. High amounts were also detected in the bladder indicating urinary excretion as a major elimination pathway. In serum, low systemic hgd40 levels were detected already at 5 min post application (p.a.), subsequently decreasing over time to non-detectable levels at 2 h p.a. As revealed by Single Photon Emission Computed Tomography, trace amounts of hgd40 were detectable in lungs up to 7 days p.a. Also in the toxicologically relevant rats and dogs, hgd40 was detectable in blood only shortly after inhalative application. The plasma pharmacokinetic profile was dose and time dependent. Repeated administration did not lead to drug accumulation in plasma of dogs and rats. These pharmacokinetic of hgd40 provide guidance for clinical development, and support an infrequent and convenient dose administration regimen. - Highlights: • Local and systemic distribution of GATA-3-specific DNAzyme hgd40 was investigated. • Pharmacokinetics of hgd40 was tested in rats and dogs. • hgd40 dissolved in PBS was easily taken up into the lungs after local application. • No accumulation of hgd40 was observed after multiple treatments. • Pharmacokinetic properties of hgd40 support convenient dose administration regimen.

60 APPLIED LIFE SCIENCES↗

Modeling CO 2 -Brine-Rock Interaction Including Mercury and H 2 S Impurities in the Context of CO 2 Geologic Storage

This study uses modeling and simulation approaches to investigate the impacts on injectivity of trace amounts of mercury (Hg) in a carbon dioxide (CO 2 ) stream injected for geologic carbon sequestration in a sandstone reservoir at ~2.5 km depth. At the range of Hg concentrations expected (7-190 ppbV, or ~ 0.06-1.6 mg/std.m 3 CO 2 ), the total volumetric plugging that could occur due to complete condensation of Hg, or due to complete precipitation of Hg as cinnabar, results in a very small porosity change. In addition, Hg concentration much higher than the concentrations considered here would be required for Hg condensation to even occur. Concentration of aqueous Hg by water evaporation into CO 2 is also unlikely because the higher volatility of Hg relative to H 2 O at reservoir conditions prevents the Hg concentration from increasing in groundwater as dry CO 2 sweeps through, volatilizing both H 2 O and Hg. Using a model-derived aqueous solution to represent the formation water, batch reactive geochemical modeling show that the reaction of the formation water with the CO 2 -Hg mixture causes the pH to drop to about 4.7 and then become buffered near 5.2 upon reaction with the sediments, with a negligible net volume change from mineral dissolution and precipitation. Cinnabar (HgS(s)) is found to be thermodynamically stable as soon as the Hg-bearing CO 2 reacts with the formation water which contains small amounts of dissolved sulfide. Liquid mercury (Hg(l)) is not found to be thermodynamically stable at any point during the simulation. Two-dimensional radial reactive transport simulations of CO 2 injection at a rate of 14.8 kg/s into a 400 m-thick formation at isothermal conditions of 106°C and average pressure near 215 bar, with varying amounts of Hg and H 2 S trace gases, show generally that porosity changes only by about ±0.05% (absolute, i.e., new porosity = initial porosity ±0.0005) with Hg predicted to readily precipitate from the CO 2 as cinnabar in a zone mostly matching the single-phase CO 2 plume. The precipitation of minerals other than cinnabar, however, dominates the evolution of porosity. Main reactions include the replacement of primarily Fe-chlorite by siderite, of calcite by dolomite, and of K-feldspar by muscovite. Chalcedony is also predicted to precipitate from the dissolution of feldspars and quartz. Although the range of predicted porosity change is quite small, the amount of dissolution and precipitation predicted for these individual minerals is not negligible. These reactive transport simulations assume that Hg gas behaves ideally. To examine effects of non-ideality on these simulations, approximate calculations of the fugacity coefficient of Hg in CO 2 were made. Results suggest that Hg condensation could be significantly overestimated when assuming ideal gas behavior, making our simulation results conservative with respect to impacts on injectivity. The effect of pressure on Henry’s constant for Hg is estimated to yield Hg solubilities about 10% lower than when this effect is not considered, a change that is considered too small to affect the conclusions of this report. Although all results in this study are based on relatively mature data and modeling approaches, in the absence of experimental data and more detailed site-specific information, it is not possible to fully validate the results and conclusions.

54 ENVIRONMENTAL SCIENCES↗

Molecular interactions of SO2 with carbonate minerals under co-sequestration conditions: a combined experimental and theoretical study

We present a combined experimental and theoretical study investigating the reactivity between selected and morphologically important surfaces of carbonate minerals with supercritical CO2 with co-existing H2O and SO2. Trace amounts of SO2 cause formation of CaSO3 in the form of hannebachite in the initial stages of SO2 adsorption and transformation. Atomistic simulations of these initial steps indicate a somewhat catalytic activity of water, which is enhanced by the presence of Magnesium atoms in the mineral surface. Under co-sequestration conditions, traces of water are not likely to cause carbonate dissolution, however the presence of SO2 greatly stabilizes the sulfite product.

58 GEOSCIENCES↗

Residual Gas Effects on Detached Solidification in Microgravity

Many microgravity directional solidification experiments yielded ingots with portions that grew without contacting the ampoule wall, leading to greatly improved crystallographic perfection. Our long-term goal is to make such detached solidification reproducible, which requires a full understanding of the mechanisms underlying it. Our Moving Meniscus Model of steady-state detachment predicts that it depends strongly on the surface tension of the melt and the advancing contact angle with the ampoule wall. Detached solidification is more likely when the contact angle for the melt on the ampoule wall is high, i.e. non-wetting. It has been claimed that impurities increase the contact angle. The objective of the current project is to determine the influence of residual gases on the surface tension and contact angle of molten semiconductors on typical ampoule materials. We are focusing on determining the influence of oxygen on the contact angle of molten InSb on clean silica ('quartz'), including the advancing and retreating contact angles in addition to the usual equilibrium contact angle. We have created a gas flow system that allows us to control the oxygen partial pressure over a sessile drop of InSb on a horizontal quartz surface. The cell is slowly tilted while videotaping to reveal the contact angles on the two sides of the drop just prior to it rolling down the surface. Thus far, we have learned the following: (1) Molten InSb readily forms an oxide layer in the presence of the trace amounts of oxygen found in high purity argon; (2) This oxide contains a substantial amount of Ga, which presumably is a trace contaminant that is not detectable in the starting material; (3) The addition of 10% hydrogen to the argon gas is sufficient to reduce the oxide and produce a clean drop; (4) An infrared filter must precede the video camera in order to produce a sharp image of the drop for later image analysis; (5) Tilting the surface on which the drop rests causes the two sides of the drop to display different contact angles, reflecting contact line sticking; (6) Vibration strongly accelerates the approach of the drop to its final shape on a horizontal surface by helping to overcome sticking of the contact line; (7) Oscillation of the drop surface due to vibration appears to increase as the surface is inclined from horizontal. Presumably, the angle at which the drop rolls down the surface is also reduced by vibration. This observation is particularly significant, as the meniscus must move along the ampoule wall during detached solidification.

Regel, Liya L.↗