Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TIME”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Linear Time-Invariant Models of a Large Cumulus Ensemble

Abstract Methods in system identification are used to obtain linear time-invariant state-space models that describe how horizontal averages of temperature and humidity of a large cumulus ensemble evolve with time under small forcing. The cumulus ensemble studied here is simulated with cloud-system-resolving models in radiative–convective equilibrium. The identified models extend steady-state linear response functions used in past studies and provide accurate descriptions of the transfer function, the noise model, and the behavior of cumulus convection when coupled with two-dimensional gravity waves. A novel procedure is developed to convert the state-space models into an interpretable form, which is used to elucidate and quantify memory in cumulus convection. The linear problem studied here serves as a useful reference point for more general efforts to obtain data-driven and interpretable parameterizations of cumulus convection.

Meteorology & Atmospheric Sciences↗
DOE OSTI2024

On CCN Effects upon Convective Cold Pool Timing and Features

Abstract Cold pools produced by deep convection can initiate new convection, and their representation in larger-scale weather and climate models could improve prediction of the extent and timing of upscale growth. Cold pools originate from latent cooling from precipitation changing phase, but little attention has been paid to microphysical influences on cold pool characteristics, particularly CCN effects. Datasets obtained from the CACTI and RELAMPAGO field campaigns, along with idealized numerical modeling, are utilized to investigate the hypothesis that convective storms forming in higher-CCN environments generate their first surface rainfall later, delaying cold pool initiation. Aircraft observations of CCN and shallow convection on 9 days do suggest a CCN effect. Those ingesting more CCN contained fewer drizzle drops, although a decreased cloud depth with increasing CCN was also likely a limiting factor. In three of those cases that later developed into deep convection, the timing of cold pool onset was not ubiquitously delayed in environments with more CCN. Idealized numerical simulations suggest that an ordinary thunderstorm can experience small delays in cold pool onset with increasing CCN due to changes in graupel production, but CCN effects on the cold pool from a supercell thunderstorm can be easily overpowered by its unique dynamics. A strong inverse relationship between cold pool strength, expansion rate, and depth with increasing CCN is suggested by the results of the ordinary thunderstorm simulation. Further consideration of CCN appears warranted for future cold pool parameterization development, but other environmental factors affecting storm morphology and precipitation cannot be ignored.

Meteorology & Atmospheric Sciences↗
DOE OSTI2022

Electron dynamics in extended systems within real-time time-dependent density-functional theory

Due to a beneficial balance of computational cost and accuracy, real-time time-dependent density-functional theory has emerged as a promising first-principles framework to describe electron real-time dynamics. Here we discuss recent implementations around this approach, in particular in the context of complex, extended systems. Results include an analysis of the computational cost associated with numerical propagation and when using absorbing boundary conditions. Here we extensively explore the shortcomings for describing electron–electron scattering in real time and compare to many-body perturbation theory. Modern improvements of the description of exchange and correlation are reviewed. In this work, we specifically focus on the Qb@ll code, which we have mainly used for these types of simulations over the last years, and we conclude by pointing to further progress needed going forward.

2D materials↗
DOE OSTI2022

Time-resolved chemical studies via time-of-flight secondary ion mass spectrometry

A method of performing time-of-flight secondary ion mass spectrometry on a sample includes the step of directing a beam of primary ions to the sample, and stimulating the migration of ions within the sample while the beam of primary ions is directed at the sample. The stimulation of the ions is cycled between a stimulation state and a lower stimulation state. Secondary ions emitted from the sample by the beam of primary ions are collected in a time-of-flight mass spectrometer. Time-of-flight secondary ion mass spectrometry is then performed on the secondary ions. A system for performing time-of-flight secondary ion mass spectrometry on a sample is also disclosed.

Ievlev, Anton V.↗
DOE OSTI2025

Time-domain all-frequency stable formulation for low-frequency electromagnetic simulation with Newmark-β time integration

An implicitly Coulomb-gauged A-ϕ formulation has previously been proposed and validated for finite ele- ment simulations of low-frequency and multiscale electromag- netic problems in the frequency domain. This formulation has demonstrated numerical stability across all frequencies, with its accuracy, efficiency, and iterative convergence established in various frequency-domain scenarios. However, direct time- domain computation is often preferable for wideband electro- magnetic problems and is typically indispensable in nonlinear and multiphysics simulations. In this work, the A-ϕ formulation is extended to the time domain. By incorporating the well-known Newmark-β time integration scheme, the proposed formulation is validated through capacitive and inductive test cases. The results confirm the solution’s accuracy and demonstrate the formulation’s stability in the time domain.

Mekonnen, Minyechil↗
DOE OSTI2024

Reproducibility of real-time time-dependent density functional theory calculations of electronic stopping power in warm dense matter

Real-time time-dependent density functional theory (TDDFT) is widely considered to be the most accurate available method for calculating electronic stopping powers from first principles, but there have been relatively few assessments of the consistency of its predictions across different implementations. This problem is particularly acute in the warm dense regime, where computational costs are high and experimental validation is rare and resource intensive. We report a comprehensive cross-verification of stopping power calculations in conditions relevant to inertial confinement fusion conducted using four different TDDFT implementations. We find excellent agreement among both the post-processed stopping powers and relevant time-resolved quantities for alpha particles in warm dense hydrogen. We also analyze sensitivities to a wide range of methodological details, including the exchange-correlation model, pseudopotentials, initial conditions, observable from which the stopping power is extracted, averaging procedures, projectile trajectory, and finite-size effects. We show that among these details, pseudopotentials, trajectory-dependence, and finite-size effects have the strongest influence, and we discuss different strategies for controlling the latter two considerations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Virtual Time III, Part 1: Unified Virtual Time Synchronization for Parallel Discrete Event Simulation

Algorithms for synchronization of parallel discrete event simulation have historically been divided between conservative methods that require lookahead but not rollback, and optimistic methods that require rollback but not lookahead. In this paper we present a new approach in the form of a framework called Unified Virtual Time (UVT) that unifies the two approaches, combining the advantages of both within a single synchronization theory. Whenever timely lookahead information is available, a logical process (LP) executes conservatively using an irreversible event handler. When lookahead information is not available the LP does not block, as it would in a classical conservative execution, but instead executes optimistically using a reversible event handler. The switch from conservative to optimistic synchronization and back is decided on an event-by-event basis by the simulator, transparently to the model code. UVT treats conservative synchronization algorithms as optional accelerators for an underlying optimistic synchronization algorithm, enabling the speed of conservative execution whenever it is applicable, but otherwise falling back on the generality of optimistic execution. We describe UVT in a novel way, based on fundamental invariants, monotonicity requirements, and synchronization rules. UVT permits zero-delay messages and pays careful attention to tie-handling using superposition. We prove that under fairly general conditions a UVT simulation always makes progress in virtual time. This is Part 1 of a trio of papers describing the UVT framework for PDES, mixing conservative and optimistic synchronization and integrating throttling control.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

A Time-Gated, Time-Correlated Single-Photon-Counting Lidar to Observe Atmospheric Clouds at Submeter Resolution

Most lidars used for cloud observations have the range resolution of about 10 m, so they are incapable of resolving submeter-scale processes that are crucial to cloud evolution. This article describes a prototype of a ground-based, vertically pointing, time-gated, time-correlated single-photon-counting lidar (referred to as the T2 lidar) developed to explore atmospheric clouds at range resolution two orders of magnitude finer than traditional atmospheric lidars. The T2 lidar emits green-light pulses (532 nm) at a repetition rate of 20.6 kHz and a pulse width of ∼650 ps, which enables the observation of aerosol and cloud layers at heights from a few hundred meters to 7.28 km above the ground level at range resolution down to 10 cm. In addition, a digital delay pulse generator controls the detector to only receive photons for a short period after each laser pulse. This time-gated technique blocks photons arriving from regions outside the target zone, thus significantly reducing the noise level and allowing observation even inside clouds. Initial observations show that the T2 lidar can detect sharp cloud boundaries and fine structures near the cloud base. Such refined measurements of cloud structure could lead to an improved understanding of microphysical processes such as droplet activation, entrainment and mixing, and precipitation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Spherical time-encoded radiation imaging simulations

Radiation source localization is important for nuclear nonproliferation and can be obtained using time-encoded imaging systems with unsegmented detectors. A scintillation crystal can be used with a moving coded-aperture mask to vary the detected count rate produced from radiation sources in the far field. The modulation of observed counts over time can be used to reconstruct an image with the known coded-aperture mask pattern. Current time-encoded imaging systems incorporate cylindrical coded-aperture masks and have limits to their fully coded imaging field-of-view. This work focuses on expanding the field-of-view to 4π by using a novel spherical coded-aperture mask. A regular icosahedron is used to approximate a spherical mask. This icosahedron consists of 20 equilateral triangles; the faces of which are each subdivided into four equilateral triangle-shaped voxels which are then projected onto a spherical surface, creating an 80-voxel coded-aperture mask. Furthermore, these polygonal voxels can be made from high-Z materials for gamma-ray modulation and/or low-Z materials for neutron modulation. In this work, we present Monte Carlo N-Particle (MCNP) simulations and simple models programmed in Mathematica to explore image reconstruction capabilities of this 80-voxel coded-aperture mask.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

First‐Order Empirical Interpolation Method for Real‐Time Solution of Parametric Time‐Dependent Nonlinear PDEs

ABSTRACT We present a model reduction approach for the real‐time solution of time‐dependent nonlinear partial differential equations (PDEs) with parametric dependencies. A major challenge in constructing efficient and accurate reduced‐order models for nonlinear PDEs is the efficient treatment of nonlinear terms. We address this by unifying the implementation of hyperreduction methods to deal with nonlinear terms. Furthermore, we introduce a first‐order empirical interpolation method (EIM) to provide an efficient approximation of the nonlinear terms in time‐dependent PDEs. We demonstrate the effectiveness of our approach on the Allen–Cahn equation, which models phase separation, and the Buckley–Leverett equation, which describes two‐phase fluid flow in porous media. Numerical results highlight the accuracy, efficiency, and stability of the proposed method compared with both the Galerkin–Newton approach and hyper‐reduced models using the standard EIM.

Nguyen, Ngoc Cuong [Center for Computational Engin↗
DOE OSTI2024

A conservative discontinuous-Galerkin-in-time (DGiT) multirate time integration framework for interface-coupled problems with applications to solid–solid interaction and air–sea models

In this paper we extend the DGiT multirate framework, developed in Connors and Sockwell (2022) for scalar transmission problems, to a solid–solid interaction (SSI) problem involving two coupled elastic solids and a coupled air–sea model with the rotating, thermal shallow water equations. In so doing we aim to demonstrate the broad applicability of the mathematical theory and governing principles established in Connors and Sockwell (2022) to coupled problems characterized by subproblems evolving at different temporal scales. Further, multirate time integration algorithms employing different time steps, optimized for the dynamics of each subproblem, can significantly improve simulation efficiency for such coupled problems. However, development of multirate algorithms is a highly non-trivial task due to the coupling, which can impact accuracy, stability or other desired properties such as preservation of system invariants. DGiT provides a general template for multirate time integration that can achieve these properties. To elucidate the manner in which DGiT accomplishes this task, we fully detail each step in the application of the framework to the SSI and air–sea coupled problems. Numerical examples illustrate key properties of the resulting multirate schemes for both problems.

42 ENGINEERING↗
DOE OSTI2024

Self-Consistent Theory for Structural Relaxation, Dynamic Bond Exchange Times, and the Glass Transition in Polymeric Vitrimers

Here, we formulate a statistical mechanical theory for how dynamic bond exchange influences the activated hopping-driven relaxation of Kuhn segments in dynamically cross-linked networks or vitrimers over a wide range of temperatures and cross-link densities. The key new methodological aspect is to address in a self-consistent manner the dynamic consequences of bond exchange on the Kuhn segmental alpha relaxation, and vice versa. The predicted temperature dependence of the segmental alpha time of vitrimers at high temperatures remains the same as that of permanent networks, but at lower temperatures, a significant acceleration of relaxation occurs due to bond exchanges. From a mechanistic perspective, the vitrimer local cage barrier is very weakly affected by bond exchange, while the collective elastic barrier contribution decreases significantly in the deeply supercooled regime. The vitrimer glass transition temperature is predicted to grow linearly with the square root of the cross-link density, as previously found for permanent networks. Material-specific chemical effects such as cross-linker size relative to that of the normal Kuhn segment or special attraction of a cross-linker with polymers are crudely considered based on model calculations. The theory is quantitatively applied to recent experiments on dry ethylene vitrimers. Good agreements are found including that the bond exchange time follows an Arrhenius law at high enough temperatures but upward non-Arrhenius deviations emerge in the deeply supercooled regime, and a collapsed master curve of the segment alpha time exists over a wide range of cross-link densities and temperatures. Possible extensions to treat dynamic heterogeneity effects and penetrant transport in vitrimers are briefly discussed.

chemical calculations↗
DOE OSTI2022

Constraining time-dependent ion temperature measurements in inertial confinement fusion (ICF) implosions with an intermediate distance neutron time-of-flight (nToF) detector

A concept for using an intermediate distance (0.3–3.0 m) neutron time-of-flight (nToF) to provide a constraint on the measurement of the time-dependence of ion temperature in inertial confinement fusion implosions is presented. Simulated nToF signals at different distances are generated and, with a priori knowledge of the burn-averaged quantities and burn history, analyzed to determine requirements for a future detector. Results indicate a signal-to-noise ratio >50 and time resolution <20 ps to constrain the ion temperature gradient to ∼±25% (0.5 keV/100 ps).

Moore, A. S. (ORCID:0000000221258882)↗
DOE OSTI2026

Rotational coherence dominates early-time dynamics and produces long-time revivals in the S 2 state of azulene

Here, the ultrafast dynamics of azulene have been debated for decades, with reported picosecond decay constants variously attributed to intramolecular vibrational redistribution (IVR), internal conversion, or rotational dephasing. Using polarization- and femtosecond time-resolved resonance-enhanced multiphoton ionization spectroscopy with a nanosecond delay window, we disentangle this long-standing inconsistency and show that the early 2–5 ps decay component arises entirely from the rotational dephasing of an excited-state wavepacket. Identical time constants extracted from the decay of the parallel signal and the rise of the perpendicular signal across multiple vibronic origins provide an unambiguous rotational anisotropy signature, eliminating the need for IVR-based interpretations. Extending the measurement window to 1.3 ns reveals well-structured J-type and C-type rotational coherence revivals in S 2 azulene on top of the well-documented fluorescence decay, demonstrating that both the short- and long-time dynamics contain information about the coherent rotational dynamics. These results show that azulene, and by extension polycyclic aromatic hydrocarbons, can sustain structured rotational coherence deep into the nanosecond regime, positioning PAHs as model systems for quantum-coherent wavepacket dynamics and providing a framework for probing coherence, decoherence, and rotational control in electronically rich molecular systems.

Zhan, Jie [University of Georgia, Athens, GA (Unit↗
DOE OSTI2023

Giant self-driven exciton-Floquet signatures in time-resolved photoemission spectroscopy of MoS 2 from time-dependent GW approach

Time-resolved, angle-resolved photoemission spectroscopy (TR-ARPES) is a one-particle spectroscopic technique that can probe excitons (two-particle excitations) in momentum space. We present an ab initio, time-domain GW approach to TR-ARPES and apply it to monolayer MoS 2 . We show that photoexcited excitons may be measured and quantified as satellite bands and lead to the renormalization of the quasiparticle bands. These features are explained in terms of an exciton-Floquet phenomenon induced by an exciton time–dependent bosonic field, which are orders of magnitude stronger than those of laser field–induced Floquet bands in low-dimensional semiconductors. Our findings imply a way to engineer Floquet matter through the coherent oscillation of excitons and open the new door for mechanisms for band structure engineering.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗