Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THORIUM OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Feasibility study on the thorium fueled boiling water breeder reactor

The feasibility of (Th,U)O 2 fueled, boiling water breeder reactor based on conventional BWR technology has been studied. In order to determine the potential use of water cooled thorium reactor as a competitive breeder, this study evaluated criticality, breeding and void reactivity coefficient in response to changes made in MFR and fissile enrichments. The result of the study shows that while using light water as moderator, low moderator to fuel volume ratio (MFR=0.5), it was possible to breed fissile fuel in negative void reactivity condition. However the burnup value was lower than the value of the current LWR. On the other hand, heavy water cooled reactor shows relatively wider feasible breeding region, which lead into possibility of designing a core having better neutronic and economic performance than light water with negative void reactivity coefficient. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

The effect of yttrium and thorium on the oxidation behavior of Ni-Cr-Al alloys

The investigation reported included a determination of the optimum composition of a Ni-Cr-Al ternary alloy with respect to oxidation resistance and minimum film-spalling tendencies. Yttrium and thorium in small amounts were added to the ternary alloy and an investigation of the oxidation mechanism and the oxide scale adherence was conducted. It was found that the oxidation mechanism of Ni-Cr-Al ternary alloys depends upon the composition of the alloy as well as the time, oxygen pressure, and temperature of oxidation.

Kumar, A.↗

Stabilization of Tungsten-Uranium Dioxide Composites Under Thermal Cycling Conditions

Uranium losses during thermal cycling of tungsten - uranium dioxide composites to 2500° C in flowing purified hydrogen for specimens initially containing 35 volume percent uranium dioxide were reduced by the use of thorium dioxide, calcium oxide, or yttrium oxide as additives in solid solution with the uranium dioxide. The effectiveness of the additives decreased in the order yttrium oxide, calcium oxide, and thorium dioxide. Stabilization of uranium dioxide by calcium oxide or yttrium oxide can be explained in part on the basis of the introduction of oxygen vacancies into the fluorite lattice and the associated lowered partial molar free energy of oxygen. The difference in the effectiveness of calcium oxide and yttrium oxide is discussed, and a possible explanation of the observed behavior is proposed. Of the concentrations of yttrium oxide tested (i.e., 2. 5, 5, and 10 mole percent), 10 mole percent of yttrium oxide was the most effective in pre­ venting loss of uranium from composities.

Gluyas, Richard E.↗

Formation of solid thorium monoxide at near-ambient conditions as observed by neutron reflectometry and interpreted by screened hybrid functional calculations

Oxidation of a ~1000 Å sputter-deposited thorium thin film at 150 °C in 100 ppm of flowing oxygen in argon produces the long-sought solid form of thorium monoxide. Changes in the scattering length density (SLD) distribution in the film over the 700-min experiment measured by in-situ, dynamic neutron reflectometry (NR) shows the densities, compositions and thickness of the various thorium oxides layers formed. Screened, hybrid density-functional theory calculations of potential thorium oxides aid interpretation, providing atomic-level picture and energetics for understanding oxygen migration. NR provided evidence of the formation of substoichiometric thorium oxide, ThO y (y < 1) at the interface between the unreacted thorium metal and its dioxide overcoat which grows inward, consuming the thorium at a rate of 2.1 Å/min while y increases until reaching 1:1 oxygen-to-thorium. Its presence indicates that kinetically-favored solid-phase ThO can be preferentially generated as a majority phase under the thermodynamically-favored ThO 2 top layer at conditions close to ambient.

36 MATERIALS SCIENCE↗

Study on Equilibrium Characteristics of Thorium-Plutonium-Minor Actinides Mixed Oxides Fuel in PWR

A study on characteristics of thorium-plutonium-minor actinides utilization in the pressurized water reactor (PWR) with the equilibrium burnup model has been conducted. For a comprehensive evaluation, several fuel cycles scenario have been included in the present study with the variation of moderator-to-fuel volume ratio (MFR) of PWR core design. The results obviously exhibit that the neutron spectra grow to be harder with decreasing of the MFR. Moreover, the neutron spectra also turn into harder with the rising number of confined heavy nuclides. The required {sup 233}U concentration for criticality of reactor augments with the increasing of MFR for all heavy nuclides confinement and thorium and uranium confinement in PWR.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Synthesis and Single Crystals of Refractory Oxides of Lanthanides and Thorium

At the completion of this program, we can report that we developed a considerable degree of technical improvements in our ability to perform hydrothermal reactions at high temperatures and pressures. We can now routinely perform reactions at 700-750°C and 200 MPa. Currently we are in the process of exploiting this new technology synthesizing a range of exotic new materials investigating relatively poorly understood materials. Our initial efforts focused on the chemistry of rare earth oxides with tetravalent and pentavalent oxides. We recently published a study of the lanthanides with Nb 5+ and Ta 5+ ions, where we grew oxides such as RENdO 4 and RETaO 4 as high quality single crystals. These compounds were targeted as potential hosts for luminescent and scintillation materials, particularly given that they are among the densest oxide hosts and hence have good potential as absorbers for high energy radiation like X-rays and gamma rays. We also isolated a range of unusual new rare earth tantalates with very complex structures. indicating that the chemistry is very sensitive to conditions. We performed some fairly comprehensive examinations of the solid-state chemistry of rare earth ions with various tetravalent metal ions especially Si 4+ , Ge 4+ , Sn 4+ and Ti 4+ . Given the potential role of rare earth silicates in immobilizing radioactive waste elements in long-term storage, and the similarity of our hydrothermal fluids with known geological conditions, this chemistry continues to be relevant. We prepared an extensive series of new lanthanide germanates (e.g. RE 13 Ge 6 O 31 (OH), BaRE 10 (GeO 4 ) 4 O 8 ). and found that there is there is almost no overlap between the chemistry of the rare earth silicates. Stannic oxide (SnO 2 ) is much more refractory and requires higher temperatures and of mineralizer concentrations. One significant result is the growth of RE 2 Sn 2 O 7 pyrochlore single crystals. These are of interest because the rare earth stannate pyrochlores are known to display a wide range of magnetic frustration such as spin ice behavior. We grew high quality single crystals of rare earth germanate and stannate pyrochlores and this led to a collaboration with Professor Kate Ross at Colorado State. Preliminary measurements, indicate that the crystals contain no detectable defects or site disorder. Initial neutron diffraction on single crystals was performed at Oak Ridge, and more detailed experiments involving the Ross group are underway at both NIST and ORNL. This particular chemistry has turned out to be the most potentially significant work on this project and the collaborative effort with Prof. Ross is the topic of a DoE renewal project on quantum materials. Our initial foray into the hydrothermal chemistry of rare earth titanates has also been very promising and a range of cubic and polar ferroic phases of the light rare earths RE 2 Ti 2 O 7 (RE = La - Pr) in the P2 1 phase. We also discovered an interesting new phase Ce 2 Ti 4 O 11 that can have implications in heavy metal immobilization and storage. along with a series of new rare earth titanates (La 5 Ti 4 O 15 (OH) Sm 3 TiO 5 (OH) 3 and Lu 5 Ti 2 O 11 (OH) with exceptionally complex structures. One interesting sidelight has been high temperature hydrothermal chemistry terbium, including the growth of large crystals of TbO(OH). This is not a new compound but it is the first time it has been grown as large single crystals. The Tb atom density is almost as high as that in Tb 2 O 3 and has a very high Verdet constant (ca. 70), making it a very attractive candidate as a Faraday rotator. Unfortunately it is not in a cubic structure but he material is hard, stable, pure and inexpensive, so should still be an attractive Faraday oscillator. We recently received a patent on this material. We also synthesized K 2 Tb(Ge 2 O 7 ) containing stable octahedral Tb 4+ ions, which appears to be the first example of a well-characterized Tb 4+ complex. Given that Tb 4+ has been proposed as a benign surrogate for more treacherous tetravalent ions such as Cf 4+ and Bk 4+ , we think that Tb 4+ silicates can be a particularly useful study for actinide immobilization and related work. We also began reaction studies with rare earths and both ReO 2 and RuO 2 . These resulted in large single crystals of species like RE 5 Ru 2 O 12 , RE 4 Re 2 O 11 , REReO 4 and RE 2 ReO 5 . Several of these samples have already been sent to ORNL for magnetic and neutron diffraction studies.

36 MATERIALS SCIENCE↗

Imminent: Irradiation Testing of (Th,Pu)O{sub 2} Fuel - 13560

Commercial-prototype thorium-plutonium oxide (Th-MOX) fuel pellets have been loaded into the material test reactor in Halden, Norway. The fuel is being operated at full power - with instrumentation - in simulated LWR / PHWR conditions and its behaviour is measured 'on-line' as it operates to high burn-up. This is a vital test on the commercialization pathway for this robust new thoria-based fuel. The performance data that is collected will support a fuel modeling effort to support its safety qualification. Several different samples of Th-MOX fuel will be tested, thereby collecting information on ceramic behaviours and their microstructure dependency. The fuel-cycle reasoning underpinning the test campaign is that commercial Th- MOX fuels are an achievable intermediate / near-term SNF management strategy that integrates well with a fast reactor future. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Thermal and Elastic Properties of Ce{sub x}Th{sub 1 –x}O{sub 2} Mixed Oxides: A Self-Consistent Thermodynamic Approach

A self-consistent thermodynamic model of thorium dioxide and its dilute alloy Ce{sub 0.05}Th{sub 0.95}O{sub 2}, which are of great importance for atomic power engineering, has been constructed based on generalized Debye and Einstein models. In terms of this model, the temperature dependences of the bulk modulus, density, and heat capacity of the systems have been obtained. The anharmonicity of the acoustical and optical modes of the crystal lattice and its change in passing from ThO{sub 2} to Ce{sub 0.05}Th{sub 0.95}O{sub 2} has been discussed.

36 MATERIALS SCIENCE↗

Mechanical and electronic properties of CeO{sub 2}, ThO{sub 2}, and (Ce,Th)O{sub 2} alloys

A systematic first-principle study is conducted to calculate bulk modulus, elastic constants, phonon-dispersion curves, and electronic structures of CeO{sub 2}, ThO{sub 2}, and their ordered binary alloys Ce{sub x}Th{sub 8-x}O{sub 16} with x=1, 2, 4, 6, and 7 using local-density approximation (LDA), generalized gradient approximation (GGA), LDA+U, and GGA+U approaches. In order to get accurate results for these type of systems including f electrons [Ce(4f) and Th(5f)] we optimized the U parameter for use in LDA+U and GGA+U approaches. The computed structural, mechanical, and electronic properties of CeO{sub 2} and ThO{sub 2} are observed to display strong correlation with experimental data. In particular, the best agreement with experiment is obtained within the LDA+U in which on-site Coulomb interaction parameter (U{sub eff}) for Ce and Th are taken as 6.0 and 5.0 eV. To check the stability of alloy forms, phonon-dispersion curves of Ce{sub x}Th{sub 8-x}O{sub 16} with x=2, 4, and 6 are computed. In all concentrations, mechanical stability conditions are satisfied for alloys. Furthermore, we observed no negative phonon branches in the phonon spectrum of alloys. Our calculations indicated a strong effect of concentration, x, on the electronic structure of Ce{sub x}Th{sub 8-x}O{sub 16}.

36 MATERIALS SCIENCE↗

On the equilibrium isotopic composition of the thorium–uranium–plutonium fuel cycle

The equilibrium isotopic compositions and the times to equilibrium in the process of thorium–uranium–plutonium oxide fuel recycling in VVER-type reactors using heavy water mixed with light water are estimated. It is demonstrated thEhfat such reactors have a capacity to operate with self-reproduction of active isotopes in the equilibrium mode.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Experimental and theoretical investigation of ThGeO[subscript 4] at high pressure

We report here the combined results of angle-dispersive x-ray diffraction experiments performed on ThGeO{sub 4} up to 40 GPa and total-energy density-functional theory calculations. Zircon-type ThGeO{sub 4} is found to undergo a pressure-driven phase transition at 11 GPa to the tetragonal scheelite structure. A second phase transition to a monoclinic M-fergusonite type is found beyond 26 GPa. The same transition has been observed in samples that crystallize in the scheelite phase at ambient pressure. No additional phase transition or evidence of decomposition of ThGeO{sub 4} has been detected up to 40 GPa. The unit-cell parameters of the monoclinic high-pressure phase are a = 4.98(2) {angstrom}, b = 11.08(4) {angstrom}, c = 4.87(2) {angstrom}, and {beta} = 90.1(1), Z = 4 at 28.8 GPa. The scheelite-fergusonite transition is reversible and the zircon-scheelite transition nonreversible. From the experiments and the calculations, the room-temperature equation of state for the different phases is also obtained. The anisotropic compressibility of the studied crystal is discussed in terms of the differential compressibility of the Th-O and Ge-O bonds.

36 MATERIALS SCIENCE↗

Stabilization of Th{sup 3+} ions into mixed-valence thorium fluoride

The unusual oxidation state +3 of the thorium has been stabilized into a lithium containing non-stoichiometric mixed-valence (III/IV) thorium fluorinated phase with formula Li{sub 2+x}Th{sub 12}F{sub 50} (0<x<1.8). This phase is closely related to the Li{sub 5.5}Ce{sub 12}F{sub 50} one, the structure of which has been determined from the combined single-crystal X-ray diffraction and high resolution synchrotron powder diffraction. In these phases, the Li{sup +} ions can be divided into two groups and are located either in locked positions or in open channels of the three dimensional framework. The amount of Li{sup +} ions in open channels can be variable, so that the afore mentioned single phase may be considered as an insertion compound. The Li{sup +} insertion is accompanied by the simultaneous reduction of a part of the Th{sup 4+} ions, resulting in a mixed-valence III/IV thorium fluoride. The electrochemical insertion of Li{sup +} ions into the open channels of the host matrix has been carried out at 60 {sup o}C, using an alkylcarbonate PC-LiClO{sub 4} 1 M electrolyte. The Li{sup +} and Th{sup 3+} contents, both in the starting composition and the Li{sup +} inserted ones, were investigated by high resolution solid state {sup 7}Li NMR and EPR, respectively. -- Graphical abstract: Electrochemical insertion of Li{sup +} ions into mixed-valence III/IV thorium fluoride and EPR spectra for the raw and inserted compounds. Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of the flickering of La{sub 2}O{sub 3} and ThO{sub 2} doped tungsten cathodes

Short-arc lamps are equipped with tungsten electrodes due to their ability to withstand a high thermal load during operation. Nominal currents of more than one hundred amperes lead to a cathode tip temperature near the melting point of tungsten. To reduce the electrode temperature and, thereby, to increase the maintenance of such lamps, ThO{sub 2} or tentatively La{sub 2}O{sub 3} are added to the electrode material. They generate a reduced work function by establishing a monolayer of emitter atoms on the tungsten surface. Emitter enrichments on the lateral surface of doped cathodes are formed. They are traced back to transport mechanisms of emitter oxides in the interior of the electrode and on the electrode surface in dependence of the electrode temperature and to the redeposition of vaporized and ionized emitter atoms onto the cathode tip by the electric field in front. The investigation is undertaken by means of glow discharge mass spectrometry, scanning electron microscope images, energy dispersive x-ray spectroscopy, and through measurements of the optical surface emissivity. The effect of emitter enrichments on the stability of the arc attachment is presented by means of temporally resolved electrode temperature measurements and by measurements of the luminous flux from the cathode-near plasma. They show that the emitter enrichments on the lateral surface of the cathode are attractive for the arc attachment if the emitter at the cathode tip is depleted. In this case, it moves along the lateral surface from the cathode tip to sections of the cathode with a reduced work function. It induces a temporary variation of the cathode tip temperature and of the light intensity from the cathode-near plasma, a so-called flickering. In particular, in case of lanthanated cathodes, strong flickering is observed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of nanometric powders of UO{sub 2+x}, (Th,U)O{sub 2+x} and (La,U)O{sub 2+x}

This paper describes a new way of preparing nanometric powders of uranium oxide, to fit the needs of studies on UO{sub 2} oxidation, through the electrochemical reduction of U(VI) into U(IV). These powders can also be doped with radionuclides if necessary. The precipitation of oxides occurs in reducing and anoxic conditions. This original method makes it possible to synthesize nanometric UO{sub 2} powders with a calibrated size, as well as the Th- and La-doped UO{sub 2} powders with a predefined composition. The powder characterization by the X-ray diffraction, X-ray photoelectron spectroscopy and transmission electron Microscopy shows the formation of spherical crystallites of UO{sub 2+x}, (Th,U)O{sub 2+x} and (La,U)O{sub 2+x} phases. The composition can be defined by the initial Th/(Th+U) and La/(La+U) ratios in solution and the particle size can be controlled by varying the pH. - Abstract: High-resolution transmission electron microscopy (HRTEM) observation of UO2+x powders obtained at a pH=6.5. Display Omitted

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis and characterization of Th{sub 1−x}Ln{sub x}O{sub 2−x/2} mixed-oxides

Graphical abstract: Display Omitted Highlights: ► Th{sub 1−x}Ln{sub x}O{sub 2−x/2} (Ln = Nd, Sm, Gd, Dy, Yb) were produced from oxalates precursors. ► The isomorphic thermal conversion of oxalates to oxides were followed by HT-ESEM. ► The stabilization of the ThO{sub 2} fluorite structure up to x = 0.4 was evidenced by XRD. ► Neodymium incorporation limits in solid solutions were determined by XRD and μ-Raman. ► Lanthanide incorporation mechanism in ThO{sub 2} structure was formally determined by μ-Raman. -- Abstract: Several Th{sub 1−x}Ln{sub x}O{sub 2−x/2} mixed-oxides (Ln = Nd, Sm, Gd, Dy, Er or Yb) were prepared from oxalate precursors. Structural and microstructural investigations of both initial precursors and resulting oxides were undertaken by XRD, μ-Raman spectroscopy and SEM, with a particular attention paid to the Th{sub 1−x}Nd{sub x}O{sub 2−x/2} series. For oxides, XRD and μ-Raman agreed well with the stabilization of the Fm3{sup ¯}m structure up to x{sub Nd} = 0.4, thanks to the concomitant creation of oxygen vacancies, as also confirmed by μ-Raman. Then, a structural transition to the Ia3{sup ¯} superstructure occurred. For x{sub Nd} ≥ 0.49, mixed-oxides with an additional hexagonal Nd{sub 2}O{sub 3} phase were prepared. Besides, the unit cell parameter of the Th{sub 1−x}Ln{sub x}O{sub 2−x/2} series followed a quadratic relation versus the x substitution rate as a result of the combination between modifications of cationic radius and cation coordination, and the decrease of O-O repulsion linked to the presence of oxygen vacancies.

36 MATERIALS SCIENCE↗

Atomistic calculations of the thermodynamic properties of mixing for tetravalent metal dioxide solid solutions: (Zr, Th, Ce)O{sub 2}

The thermodynamic mixing properties for isometric Th{sub x}Ce{sub 1-x}O{sub 2}, Ce{sub x}Zr{sub 1-x}O{sub 2}, and Th{sub x}Zr{sub 1-x}O{sub 2} were determined using quantum-mechanical calculations and subsequent Monte-Carlo simulations. Although the Th{sub x}Ce{sub 1-x}O{sub 2} binary indicates exsolution below 600 K, the energy gain due to exsolution is small (E{sub exsoln}=1.5 kJ/(mol cations) at 200 K). The energy gain for exsolution is significant for the binaries containing Zr; at 1000 K, E{sub exsoln}=6 kJ/(mol cations) for the Ce{sub x}Zr{sub 1-x}O{sub 2} binary, and E{sub exsoln}=17 kJ/(mol cations) for the Th{sub x}Zr{sub 1-x}O{sub 2} binary. The binaries containing Zr have limited miscibility and cation ordering (at 200 K for x=0.5). At 1673 K, only 4.0 and 0.25 mol% ZrO{sub 2} can be incorporated into CeO{sub 2} and ThO{sub 2}, respectively. Solid-solution calculations for the tetragonal Th{sub x}Zr{sub 1-x}O{sub 2} binary show decreased mixing enthalpy due to the increased end-member stability of tetragonal ZrO{sub 2}. Inclusion of the monoclinic ZrO{sub 2} is predicted to further reduce the mixing enthalpy for binaries containing Zr. - Graphical abstract: Temperature-composition phase diagram showing miscibility gaps for the isometric Th{sub x}Ce{sub 1-x}O{sub 2}, isometric Ce{sub x}Zr{sub 1-x}O{sub 2}, isometric Th{sub x}Zr{sub 1-x}O{sub 2}, and tetragonal Th{sub x}Zr{sub 1-x}O{sub 2} binaries at low composition (0<x<0.025), where the solid solidus is an average of the linear and Margules approximations for the incorporation limit (x{sub inc}), and the dotted solidus lines are the Margules approximation (above the average) and the linear approximation (below the average). Highlights: Black-Right-Pointing-Pointer {Delta}H{sub mix}, {Delta}G{sub mix}, and {Delta}S{sub mix} of Th{sub x}Ce{sub 1-x}O{sub 2}, Th{sub x}Zr{sub 1-x}O{sub 2}, and Ce{sub x}Zr{sub 1-x}O{sub 2} binaries are calculated. Black-Right-Pointing-Pointer Cation ordering is identified at low T for binaries containing ZrO{sub 2}. Black-Right-Pointing-Pointer Phase diagrams are estimated based on DFT and Monte-Carlo calculations. Black-Right-Pointing-Pointer DFT and Monte-Carlo calculations are in agreement with experimental (and previous computational) results, where available. Black-Right-Pointing-Pointer Increased thermodynamic stability of monoclinic and tetragonal ZrO{sub 2} end-member affects solid solution binaries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Syntheses and single-crystal structures of CsTh(MoO{sub 4}){sub 2}Cl and Na{sub 4}Th(WO{sub 4}){sub 4}

Colorless crystals of CsTh(MoO{sub 4}){sub 2}Cl and Na{sub 4}Th(WO{sub 4}){sub 4} have been synthesized at 993 K by the solid-state reactions of ThO{sub 2}, MoO{sub 3}, CsCl, and ThCl{sub 4} with Na{sub 2}WO{sub 4}. Both compounds have been characterized by the single-crystal X-ray diffraction. The structure of CsTh(MoO{sub 4}){sub 2}Cl is orthorhombic, consisting of two adjacent [Th(MoO{sub 4}){sub 2}] layers separated by an ionic CsCl sublattice. It can be considered as an insertion compound of Th(MoO{sub 4}){sub 2} and reformulated as Th(MoO{sub 4}){sub 2}.CsCl. The Th atom coordinates to seven monodentate MoO{sub 4} tetrahedra and one Cl atom in a highly distorted square antiprism. Na{sub 4}Th(WO{sub 4}){sub 4} adopts a scheelite superlattice structure. The three-dimensional framework of Na{sub 4}Th(WO{sub 4}){sub 4} is constructed from corner-sharing ThO{sub 8} square antiprisms and WO{sub 4} tetrahedra. The space within the channels is filled by six-coordinate Na ions. Crystal data: CsTh(MoO{sub 4}){sub 2}Cl, monoclinic, P2{sub 1}/c, Z=4, a=10.170(1) A, b=10.030(1) A, c=9.649(1) A, {beta}=95.671(2){sup o}, V=979.5(2) A{sup 3}, R(F)=2.65% for I>2{sigma}(I); Na{sub 4}Th(WO{sub 4}){sub 4}, tetragonal, I4{sub 1}/a, Z=4, a=11.437(1) A, c=11.833(2) A, V=1547.7(4) A{sup 3}, R(F)=3.02% for I>2{sigma}(I). -- Graphical abstract: The two-dimensional layered structure of CsTh(MoO{sub 4}){sub 2}Cl viewed down the b axis. Display Omitted Research highlights: {yields} Syntheses of CsTh(MoO{sub 4}){sub 2}Cl and Na{sub 4}Th(WO{sub 4}){sub 4} from chlorides. {yields} Single-crystal structures of CsTh(MoO{sub 4}){sub 2}Cl and Na{sub 4}Th(WO{sub 4}){sub 4}. {yields} CsTh(MoO{sub 4}){sub 2}Cl can be considered as an inclusion compound composed of covalent [Th(MoO{sub 4}){sub 2}] layer and ionic [CsCl] layers. {yields} Na{sub 4}Th(WO{sub 4}){sub 4} adopts a defect scheelite structure.

36 MATERIALS SCIENCE↗