Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “THERMAL EXPANSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Descriptors for thermal expansion in solids

Thermal expansion in materials can be accurately modeled with careful anharmonic phonon calculations within density functional theory. However, because of interest in controlling thermal expansion and the time consumed evaluating thermal expansion properties of candidate materials, either theoretically or experimentally, an approach to rapidly identifying materials with desirable thermal expansion properties would be of great utility. When the ionic bonding is important in a material, we show that the fraction of crystal volume occupied by ions, (based upon ionic radii), the mean bond coordination, and the deviation of bond coordination are descriptors that correlate with the room-temperature coefficient of thermal expansion for these materials found in widely accessible databases. Correlation is greatly improved by combining these descriptors in a multi-dimensional fit. This fit reinforces the physical interpretation that open space combined with low mean coordination and a variety of local bond coordinations leads to materials with lower coefficients of thermal expansion, materials with single-valued local coordination and less open space have the highest coefficients of thermal expansion.

36 MATERIALS SCIENCE↗

Impacts of oxo interactions within actinyl metal organic materials: highlight on thermal expansion behaviour

Physical properties of actinyl materials are influenced by the presence of oxo functional groups. Herein, we report large thermal expansion coefficients for a uranyl metal organic nanotube that switch from positive to negative upon dehydration. Finally, different behaviour is observed in the neptunyl system due to variations in the oxo interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural changes accompanying negative thermal expansion in Zr{sub 2}(MoO{sub 4})(PO{sub 4}){sub 2}

Zr{sub 2}(MoO{sub 4})(PO{sub 4}){sub 2} is orthorhombic (Sc{sub 2}W{sub 3}O{sub 12} structure) from 9 to at least 400 K, and shows anisotropic volume negative thermal expansion (alpha{sub a}=-8.35(4)x10{sup -6} K{sup -1}; alpha{sub b}=3.25(3)x10{sup -6} K{sup -1}; alpha{sub c}=-8.27(5)x10{sup -6} K{sup -1} in the range 122-400 K) similar in magnitude to A{sub 2}M{sub 3}O{sub 12} (M-Mo or W) with large A{sup 3+}. The contraction on heating is associated with a pattern of Zr-O-Mo/P bond angle changes that is somewhat similar, but not the same as that for Sc{sub 2}W{sub 3}O{sub 12}. On heating, the most pronounced reductions in the separation between the crystallographic positions of neighboring Zr and P are not associated with significant reductions in the corresponding Zr-O-P crystallographic bond angles, in contrast to what was seen for Sc{sub 2}W{sub 3}O{sub 12}. - Graphical abstract: Negative thermal expansion in Zr{sub 2}(MoO{sub 4})(PO{sub 4}){sub 2} is associated with a complex pattern of structural changes that is not the same as that previously reported for Sc{sub 2}(WO{sub 4}){sub 3}.

36 MATERIALS SCIENCE↗

Thermal expansion in UO 2 determined by high-energy X-ray diffraction

Here we present crystallographic analyses of high-energy X-ray diffraction data on polycrystalline UO2 up to the melting temperature. The Rietveld refinements of our X-ray data are in agreement with previous measurements, but are systematically located around the upper bound of their uncertainty, indicating a slightly steeper trend of thermal expansion compared to established values. This observation is consistent with recent first principles calculations.

Guthrie, M.↗

Large isotropic negative thermal expansion above a structural quantum phase transition

Perovskite structured materials contain myriad tunable ordered phases of electronic and magnetic origin with proven technological importance and strong promise for a variety of energy solutions. An always-contributing influence beneath these cooperative and competing interactions is the lattice, whose physics may be obscured in complex perovskites by the many coupled degrees of freedom which makes these systems interesting. Here we report signatures of an approach to a quantum phase transition very near the ground state of the nonmagnetic, ionic insulating, simple cubic perovskite material ScF3 and show that its physical properties are strongly effected as much as 100 K above the putative transition. Spatial and temporal correlations in the high-symmetry cubic phase determined using energy- and momentum-resolved inelastic X-ray scattering as well as X-ray diffraction reveal that soft mode, central peak and thermal expansion phenomena are all strongly influenced by the transition.

Handunkanda, Sahan Uddika↗

Thermal expansion in the garnet-type solid electrolyte (Li 7 - x Al x /3 )La 3 Zr 2 O 12 as a function of Al content

The thermal expansion (TE) coefficients of the lithium-stable lithium-ion conducting garnet lithium lanthanum zirconium oxide (LLZ) and the effect of aluminum substitution were measured from room temperature up to 700 °C by a synchrotron-based X-ray diffraction. The typical TE value measured for the most reported composition (LLZ doped with 0.3 wt.% or 0.093 mol% aluminum) was 15.498 × 10-6 K-1, which is approximately twice the value reported for other garnet-type structures. As the Al(III) concentration has been observed to strongly affect the structure observed and the ionic conductivity, we also assessed its role on thermal expansion and noted only a small variation with increasing dopant concentration. The materials implications for using LLZ in a solid state battery are discussed.

36 MATERIALS SCIENCE↗

Composition, response to pressure, and negative thermal expansion in M II B IV F 6 (M = Ca, Mg; B = Zr, Nb) [Composition, response to pressure, and negative thermal expansion in A II B IV F 6 ; A - Ca, Mg, B - Zr, Nb]

CaZrF 6 has recently been shown to combine strong negative thermal expansion (NTE) over a very wide temperature range (at least 10–1000 K) with optical transparency from mid-IR into the UV range. Variable-temperature and high-pressure diffraction has been used to determine how the replacement of calcium by magnesium and zirconium by niobium(IV) modifies the phase behavior and physical properties of the compound. Similar to CaZrF 6 , CaNbF 6 retains a cubic ReO 3 -type structure down to 10 K and displays NTE up until at least 900 K. It undergoes a reconstructive phase transition upon compression to ~400 MPa at room temperature and pressure-induced amorphization above ~4 GPa. Prior to the first transition, it displays very strong pressure-induced softening. MgZrF 6 adopts a cubic ( Fm$\bar{3}$m ) structure at 300 K and undergoes a symmetry-lowering phase transition involving octahedral tilts at ~100 K. Immediately above this transition, it shows modest NTE. Its’ thermal expansion increases upon heating, crossing through zero at ~500 K. Unlike CaZrF 6 and CaNbF 6 , it undergoes an octahedral tilting transition upon compression (~370 MPa) prior to a reconstructive transition at ~1 GPa. Cubic MgZrF 6 displays both pressure-induced softening and stiffening upon heating. MgNbF 6 is cubic ( Fm$\bar{3}$m ) at room temperature, but it undergoes a symmetry-lowering octahedral tilting transition at ~280 K. It does not display NTE within the investigated temperature range (100–950 K). Furthermore the replacement of Zr(IV) by Nb(IV) leads to minor changes in phase behavior and properties, the replacement of the calcium by the smaller and more polarizing magnesium leads to large changes in both phase behavior and thermal expansion.

36 MATERIALS SCIENCE↗

Synthesis of NaTi 2 ( PO 4 ) 3 by the Inorganic–Organic Steric Entrapment Method and Its Thermal Expansion Behavior

Crystalline pure NaTi 2 ( PO 4 ) 3 ( NTP ) powder was synthesized at 700°C using a simple and low energy, hybrid inorganic–organic, steric entrapment method. Sodium nitrite (Na NO 2 ) and ammonium phosphate dibasic (( NH 4 ) 2 HPO 4 ) dissolved in water, whereas titanium ( IV ) isopropoxide (Ti[ OCH ( CH 3 ) 2 ] 4 ) hydrolyzed in water. Ethylene glycol ( HOCH 2 CH 2 OH ) was used as a polymeric entrapper and hydrolysis of the Ti source was hindered by its dissolution in isopropyl alcohol. The resulting NTP powder was characterized by thermogravimetric analysis/differential thermal analysis, X‐ray diffractometry, scanning electron microscopy, specific surface area by Brunauer–Emmett–Teller nitrogen absorption, and particle size analysis. Furthermore, C, H, N were measured by the classical Pregl‐Dumas method. The thermal expansion behavior in all { hkl } pole directions was also determined by in situ high‐temperature X‐ray diffraction using synchrotron radiation and was found to be in agreement with other published studies.

Ribero, Daniel↗

Hoberman-sphere-inspired lattice metamaterials with tunable negative thermal expansion

Materials with engineered thermal expansion coefficients, capable of avoiding failure or irreversible destruction of structures and devices, are important for aerospace, civil, biomedical, optics, and semiconductor applications. In natural materials, thermal expansion usually cannot be adjusted easily and a negative thermal expansion coefficient is still uncommon. Here we propose a novel architected lattice bi-material system, inspired by the Hoberman sphere, showing a wide range of tunable thermal expansion coefficient from negative to positive, -1.04 x 10 -3 degrees C-1 to 1.0 x 10 -5 degrees C-1. Numerical simulations and analytical formulations are implemented to quantify the evolution of the thermal expansion coefficients and reveal the underlying mechanisms responsible for this unusual behavior. We show that the thermal expansion coefficient of the proposed metamaterials depends on the thermal expansion coefficient ratio and the axial stiffness ratio of the constituent materials, as well as the bending stiffness and the topological arrangement of the constitutive elements. The finding reported here provides a new routine to design architected metamaterial systems with tunable negative thermal expansion for a wide range of potential applications.

36 MATERIALS SCIENCE↗