Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TERNARY FISSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Application of T-Invariance Conditions in Selecting Mechanisms of Nuclear Reactions, Decays, and Fission

T-invariance conditions for the differential cross sections of multiparticle multistep nuclear reactions are found with allowance for spin orientations of particles in the initial channels of such reactions. It is shown that the asymmetry coefficients for different T-parities in the differential cross sections for original and time-reversed reactions are expressed in terms of unified scalar (pseudoscalar) functions that depend of the 3-momenta and spins of particles involved in the initial and final channels of the reactions under analysis. It is also shown that knowledge of the aforementioned functions for the asymmetries under analysis in the original reaction makes it possible to reconstruct the respective functions for the analogous asymmetries in the time-reversed reaction without studying it experimentally. By considering the example of T-even and T-odd asymmetries in reactions where oriented nuclei undergo binary and ternary fission induced by cold polarized neutrons, it is demonstrated that the T-invariance conditions in question can be used to select mechanisms behind the appearance of the above asymmetries—in particular, mechanisms associated with the presence of T-noninvariant interactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Formation of Heavy and Superheavy Neutron Rich Nuclei

A new way is proposed to discover and examine unknown neutron-rich heavy and superheavy nuclei at the 'north-east' part of the nuclear map. The present limits of the upper part of the nuclear map is very close to stability while the unexplored area of heavy neutron-rich nuclides to the east of the stability line (also those located along the neutron closed shell N = 126) is extremely important for nuclear astrophysics investigations and for the understanding of the r-process of astrophysical nucleo-genesis. A novel idea is proposed for the production of these nuclei via low-energy multi-nucleon transfer reactions using a gain given by the shell effects. This finding may spur new studies at heavy ion facilities and should have significant impact for future experiments. The use of the multi-nucleon transfer reactions in low-energy collisions of heavy actinide nuclei gives us also the only chance to approach the 'island of stability' of superheavy elements. A possibility for a three-body decay (heavy ternary fission) is predicted for superheavy nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Probing Nuclear Structure by Cold Emission Processes

Cold emission processes (one and two-proton emission, alpha-decay, heavy cluster emission and cold binary or ternary fission) are presently among important tools to investigate the structure of rare nuclei far from the stability line. We analyze the coupling between collective excitations of the emitted fragments and the relative motion, in terms of the coupled channels technique. It turns out that partial decay widths to excited states of emitted fragments are very sensitive to the nuclear structure details.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Scoping Analyses on Tritium Permeation to VHTR Integarted Industrial Application Systems

Tritium permeation is a very important current issue in the very high temperature reactor (VHTR) because tritium is easily permeated through high temperature metallic surfaces. Tritium permeations in the VHTR-integrated systems were investigated in this study using the tritium permeation analysis code (TPAC) that was developed by Idaho National Laboratory (INL). The INL TPAC is a numerical tool that is based on the mass balance equations of tritium containing species and hydrogen (i.e. HT, H2, HTO, HTSO4, TI) coupled with a variety of tritium sources, sink, and permeation models. In the TPAC, ternary fission and thermal neutron caption reactions with 6Li, 7Li 10B, 3He were taken into considerations as tritium sources. Purification and leakage models were implemented as main tritium sinks. Permeation of tritium and H2 through pipes, vessels, and heat exchangers were considered as main tritium transport paths. In addition, electroyzer and isotope exchange models were developed for analyzing hydrogen production systems including high temperature electrolysis (HTSE) and sulfur-iodine processes.

42 ENGINEERING↗

Development of Tritium Permeation Analysis Code and Tritium Transport in a High Temperature Gas-Cooled Reactor Coupled with Hydrogen Production System

Abstract – A tritium permeation analyses code (TPAC) was developed by Idaho National Laboratory for the purpose of analyzing tritium distributions in very high temperature reactor (VHTR) systems, including integrated hydrogen production systems. A MATLAB SIMULINK software package was used in developing the code. The TPAC is based on the mass balance equations of tritium-containing species and various forms of hydrogen coupled with a variety of tritium sources, sinks, and permeation models. In the TPAC, ternary fission and neutron reactions with 6Li, 7Li 10B, and 3He were taken into considerations as tritium sources. Purification and leakage models were implemented as main tritium sinks. Permeation of tritium and H2 through pipes, vessels, and heat exchangers were considered as main tritium transport paths. In addition, electroyzer and isotope exchange models were developed for analyzing hydrogen production systems, including high temperature electrolysis and sulfur-iodine processes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Study on the Tritium Behaviors in the VHTR System. Part 1: Development of Tritium Analysis Code for VHTR and Verification

A tritium permeation analyses code (TPAC) has been developed in Idaho National Laboratory (INL) by using MATLAB SIMULINK package for analysis of tritium behaviors in the VHTRs integrated with hydrogen production and process heat application systems. The modeling is based on the mass balance of tritium containing species and hydrogen (i.e., HT, H2, HTO, HTSO4, and TI) coupled with a variety of tritium source, sink, and permeation models. The code includes (1) tritium sources from ternary fission and neutron reactions with 6Li, 7Li 10B, 3He, (2) tritium purification system, (3) leakage of tritium with coolant, (4) permeation through pipes, vessels, and heat exchangers, (4) electrolyzer for high temperature steam electrolysis (HTSE), and (5) isotope exchange for SI process. Verification of the code has been performed by comparisons with the analytical solutions, the experimental data, and the benchmark code results based on the Peach Bottom reactor design. The results showed that all the governing equations are well implemented into the code and correctly solved. This paper summarizes all the background, the theory, the code structures, and some verification results related to the TPAC code development in Idaho National Laboratory (INL).

42 ENGINEERING↗

Development and Verification of Tritium Analyses Code for a Very High Temperature Reactor

A tritium permeation analyses code (TPAC) has been developed by Idaho National Laboratory for the purpose of analyzing tritium distributions in the VHTR systems including integrated hydrogen production systems. A MATLAB SIMULINK software package was used for development of the code. The TPAC is based on the mass balance equations of tritium-containing species and a various form of hydrogen (i.e., HT, H2, HTO, HTSO4, and TI) coupled with a variety of tritium source, sink, and permeation models. In the TPAC, ternary fission and neutron reactions with 6Li, 7Li 10B, 3He were taken into considerations as tritium sources. Purification and leakage models were implemented as main tritium sinks. Permeation of HT and H2 through pipes, vessels, and heat exchangers were importantly considered as main tritium transport paths. In addition, electroyzer and isotope exchange models were developed for analyzing hydrogen production systems including both high-temperature electrolysis and sulfur-iodine process. The TPAC has unlimited flexibility for the system configurations, and provides easy drag-and-drops for making models by adopting a graphical user interface. Verification of the code has been performed by comparisons with the analytical solutions and the experimental data based on the Peach Bottom reactor design. The preliminary results calculated with a former tritium analyses code, THYTAN which was developed in Japan and adopted by Japan Atomic Energy Agency were also compared with the TPAC solutions. This report contains descriptions of the basic tritium pathways, theory, simple user guide, verifications, sensitivity studies, sample cases, and code tutorials. Tritium behaviors in a very high temperature reactor/high temperature steam electrolysis system have been analyzed by the TPAC based on the reference indirect parallel configuration proposed by Oh et al. (2007). This analysis showed that only 0.4% of tritium released from the core is transferred to the product hydrogen. The amount of tritium in the product hydrogen was estimated to be approximately an order less than the gaseous effluent limit for tritium.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Tritium Content in and Release from Pressurized-Water-Reactor Fuel Cladding

It is expected that tritium pretreatment will be required in future reprocessing plants to prevent the release of tritium to the environment (except for long-cooled fuels; >30 yrs). To design and operate future reprocessing plants in a safe and environmentally compliant manner, the amount and form of tritium in the used nuclear fuel (UNF) must be understood and quantified. Tritium in light water reactor (LWR) fuel is dispersed between the fuel matrix and the fuel cladding, and some tritium may be in the plenum, probably as tritiated water (THO or T{sub 2}O). In a standard processing flowsheet, tritium management would be accomplished by treatment of liquid streams within the plant. Pretreating the fuel prior to dissolution to release the tritium into a single off-gas stream could simplify tritium management, so the removal of tritium in the liquid streams throughout the plant may not be required. The fraction of tritium remaining in the cladding may be reduced as a result of tritium pretreatment. Since Zircaloy'R cladding makes up roughly 25% by mass of UNF in the United States, processes are being considered to reduce the volume of reprocessing waste attributed to Zircaloy'R clad fuel by recovering the zirconium from the cladding for reuse. Treatment options for Zircaloy cladding include recycling to recover the significant value of the zirconium and eliminate costs associated with the disposal of transuranic-contaminated Zircaloy. If LWR fuel is reprocessed and the fuel is dissolved without tritium pretreatment, the tritium in the cladding will remain bound to the cladding. If tritium pretreatment is included in the flow sheet, some portion of the tritium in the cladding may be released along with the tritium from the fuel matrix. To design and operate reprocessing plants in a safe and environmentally compliant manner, the amount and form of tritium in the UNF must be understood and quantified. For Zircaloy-clad fuels from light water reactors, the tritium produced from ternary fission and other sources is expected to be divided between the fuel, where it is generated, and the cladding. It has been previously documented that a fraction of the tritium produced in uranium oxide fuel from LWRs can migrate and become trapped in the cladding. Estimates of the percentage of tritium in the cladding typically range from 0-96%. There is relatively limited data on how the tritium content of the cladding varies with burnup and fuel history (temperature, power, etc.) and how pretreatment impacts its release. The present study was undertaken to understand how tritium pretreatment at standard tritium pretreatment conditions (oxidation in air at 480 to 600 deg. C) affects the tritium content in the Zircaloy cladding and the extent to which the tritium content could be reduced with modest increases in the tritium pretreatment temperature. The data indicate that <20% of the tritium in PWR cladding will be removed by pretreatment at 500-700 deg. C for 24 h. Essentially 100% of the tritium will likely be released if the heating time at 700 deg. C is extended to 96 h. Small amounts of tritium are expected to be released if the cladding is heated at ≤ 600 deg. C for up to 96 h. The results of this study indicate that the amount of tritium released from tritium pretreatment systems will be dependent on both the operating temperature and length of time in the pretreatment system. Under certain conditions, a significant fraction of the tritium could remain bound in the cladding and would need to be considered in any subsequent processing of the cladding to recover/recycle the zirconium. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Sequential character of low-energy ternary and quaternary nuclear fission

An analysis of low-energy true ternary (quaternary) nuclear fission leads to the conclusion that these fission modes have a sequential two-step (three-step) character such that the emission of a third particle (third and fourth particles) and the separation of fission fragments occur at distinctly different instants, in contrast to the simultaneous emergence of all fission products in the case of onestep ternary (quaternary) fission. This conclusion relies on the following arguments. First, the emission of a third particle (third and fourth particles) from a fissile nucleus is due to a nonevaporative mechanism associated with a nonadiabatic character of the collective deformation motion of this nucleus at the stages preceding its scission. Second, the axial symmetry of the deformed fissile compound nucleus and the direction of its symmetry axis both remain unchanged at all stages of ternary (quaternary) fission. This circumstancemakes it possible to explain themechanism of the appearance of observed anisotropies and T — odd asymmeries in the angular distributions of products of ternary (quaternary) nuclear fission. Third, the T —odd asymmetry discovered experimentally in ternary nuclear fission induced by cold polarized neutrons obeys the T —invariance condition only in the case of a sequential two-step (three-step) character of true ternary (quaternary) nuclear fission. At the same time, this asymmetry is not a T —invariant quantity in the case of the simultaneous emission of products of true ternary (quaternary) nuclear fission from the fissile compound nucleus.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Assessment of tritium effluent from Prototype Generation IV Sodium-cooled Fast Reactor

We report a tritium transport model for a pool-type sodium cooled fast reactor was developed for estimation of tritium effluents from the Prototype Generation IV Sodium-cooled Fast Reactor (PGSFR). For this purpose, the transport model developed for Experimental Breeder Reactor II and Fast Flux Test Facility was updated and validated. The tritium production rate from ternary fission and activations in PGSFR were calculated by the Argonne Reactor Computation (ARC) code suite for fast reactor analysis, and due to the potential uncertainties in source terms and variations of cold trap performance and material permeability during reactor operation, the tritium distributions and tritium effluents were estimated for several bounding cases. The upper bounding gaseous and liquid tritium release rates from PGSFR are similar to ~440.7 Ci/year and 14.7 Ci/year, respectively. The gaseous tritium effluent is about few orders of magnitude smaller than the regulatory constraint of the tritium concentration in the air. The peak tritium concentration in the steam-generator feedwater is similar to ~1.1x10 -3 mu Ci/g, which is required to be diluted prior to releasing as tritiated water. The accumulated tritium in the cold trap after five cycle operations is ~ 52,000 Ci. Because of significant conservatism in these upper bounding estimations, it is expected that the tritium effluent at the nominal case with plausible source terms would be about 2 orders of magnitude smaller than that of the upper bounding case.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Some Aspects of Nuclear Structure

The one phonon γ-vibrational bands in 154Gd are compared with the theories existing at that time (1960) showing the best agreement with the rotation–vibration model of Faessler and Greiner. Nuclear shape coexistence was first discovered in both 72 Se and 184–188 Hg with the Frankfurt Generalized Collective Model reproducing the two different shapes. In recent years experimental evidences have been found for both one, two, and possibly three phonon γ bands in the A = 103–110 region including the first such bands in odd N-even Z and even N-odd Z nuclei. Cluster radioactivity predicted by Sandulescu, Poenaru and Greiner has been observed. Here, maximum cluster radioactivity is seen in the zero neutron emission in cold binary and ternary fission of 252 Cf. Finally, recent super heavy element discoveries of the new elements 115, 117 and 118 are described. The half-lives in 117 which is closest in N to N = 184 on the Island of Stability support the theoretical predictions of the long-lived island.

Hamilton, J. H.↗

Tritium Formation and Mitigation in High Temperature Reactors

Tritium is a radiologically active isotope of hydrogen. It is formed in nuclear reactors by neutron absorption and ternary fission events and can subsequently escape into the environment. In order to prevent the tritium contamination of proposed reactor buildings and surrounding sites, this paper examines the root causes and potential solutions for the production of this radionuclide, including materials selection and inert gas sparging. A model is presented that can be used to predict permeation rates of hydrogen through metallic alloys at temperatures from 450–750°C. Results of the diffusion model are presented for one steady-state value of tritium production in the reactor.

42 ENGINEERING↗

Tritium Formation and Mitigation in High-Temperature Reactors

Tritium is a radiologically active isotope of hydrogen. It is formed in nuclear reactors by neutron absorption and ternary fission events and can subsequently escape into the environment. To prevent the tritium contamination of proposed reactor buildings and surrounding sites, this study examines the root causes and potential mitigation strategies for permeation of tritium (such as: materials selection, inert gas sparging, etc...). A model is presented that can be used to predict permeation rates of hydrogen through metallic alloys at temperatures from 450–750 degrees C. Results of the diffusion model are presented for a steady production of tritium

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Tritium Formation and Mitigation in High-Temperature Reactor Systems

Tritium is a radiologically active isotope of hydrogen. It is formed in nuclear reactors by neutron absorption and ternary fission events and can subsequently escape into the environment. To prevent the tritium contamination of proposed reactor buildings and surrounding sites, this study examines the root causes and potential mitigation strategies for permeation of tritium (such as: materials selection, inert gas sparging, etc...). A model is presented that can be used to predict permeation rates of hydrogen through metallic alloys at temperatures from 450–750 degrees C. Results of the diffusion model are presented for a steady production of tritium

42 ENGINEERING↗

Novel Calibration Approach for Monitoring Aerosol Hydrogen Isotopes Using Laser-Induced Breakdown Spectroscopy for Molten Salt Reactor Off-Gas Streams

Online monitoring is a key challenge for the continued development of molten salt reactor (MSR) technology. Laser-induced breakdown spectroscopy (LIBS) has previously been demonstrated to be a viable tool for monitoring aerosolized species and noble gases in real time, but the ability to discern varying isotopes in these streams has not yet been investigated for MSR applications. Tritium will form in MSRs from ternary fission and from (n,α)-reactions occurring in lithium-containing salts. This study compares three spectrometers of varying resolutions and types for measuring hydrogen isotope shifts in LIBS spectra of wetted filter paper. For each spectrometer, multivariate models were built (i.e., principal component regression, partial least squares regression, and multivariate curve resolution) to quantify the isotope ratio. The top models were then modified and corrected to apply the models to aerosol samples with varying isotope ratios. This novel calibration strategy offers an 82% reduction in volume of the calibration samples needed and is a more viable pathway for calibrating deployable LIBS systems. Lastly, this calibration model was compared with an all-aerosol trained model for monitoring hydrogen isotopes during a real-time test where the protium/deuterium ratio, along with representative salt species (i.e., lithium, sodium, and potassium) were adjusted dynamically. Results of this test validated the predictive capabilities of the transferred model and highlighted the capabilities of LIBS for real-time monitoring of MSR effluent streams.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Development of Tritium Permeation Analysis Code (TPAC)

Idaho National Laboratory developed the Tritium Permeation Analysis Code (TPAC) for tritium permeation in the Very High Temperature Gas Cooled Reactor (VHTR). All the component models in the VHTR were developed and were embedded into the MATHLAB SIMULINK package with a Graphic User Interface. The governing equations of the nuclear ternary reaction and thermal neutron capture reactions from impurities in helium and graphite core, reflector, and control rods were implemented. The TPAC code was verified using analytical solutions for the tritium birth rate from the ternary fission, the birth rate from 3He, and the birth rate from 10B. This paper also provides comparisons of the TPAC with the existing other codes. A VHTR reference design was selected for tritium permeation study from the reference design to the nuclear-assisted hydrogen production plant and some sensitivity study results are presented based on the HTGR outlet temperature of 750 degrees C.

99 GENERAL AND MISCELLANEOUS↗

Energy distribution of ternary {alpha} particles in spontaneous fission of {sup 252}Cf

The energy distribution of the ternary {alpha} particles in spontaneous fission of {sup 252}Cf was measured. For the first time an energy threshold as low as 1 MeV was reached. The experiment used an array of unshielded silicon detectors measuring energy and time-of-flight (TOF) of ternary particles in coincidence with fission fragments. The TOF resolution of the system was sufficient for clear separation of {sup 6}He and tritons from {sup 4}He. The statistics were adequate to extract the {sup 6}He/{sup 4}He yield ratio. For both {sup 4}He and {sup 6}He, an excess in the yield (as compared to a Gaussian shape) was observed at energies below 9 MeV. The measured ternary {alpha} spectrum was corrected for the distortion induced by the detection geometry covering equatorial particle emission only. The emission angle was found to affect mainly the width of the energy distribution by up to 1 MeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Radiation tolerance of M{sub n+1}AX{sub x} phases, Ti{sub 3}ALC{sub 2} and Ti{sub 3}SIC{sub 2}.

During investigations of novel material types with uses in future nuclear technologies (ITER/DEMO and GenIV fission reactors), ternary carbides with compositions Ti{sub 3}AlC{sub 2} and Ti{sub 3}SiC{sub 2} have been irradiated with high Xe fluences, 6.25 x 10{sup 15} ions cm{sup -2} ({approx}25-30 dpa), using the IVEM-TANDEM facility at Argonne National Laboratory. Both compositions show high tolerance to damage, and give indications that they are likely to remain crystalline to much higher fluences. There is a visible difference in tolerance between Ti{sub 3}AlC{sub 2} and Ti{sub 3}SiC{sub 2} that can be related to the changes in bonding within each material. These initial findings provide evidence for a novel class of materials (+200 compounds) with high radiation resistance, while, significantly, both of these materials are composed of low-Z elements and hence exhibit no long-term activation.

36 MATERIALS SCIENCE↗