Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TEM data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Solution of reduced graphene oxide synthesized from coconut shells and its optical properties

Reduced graphene oxide (r-GO)powder has been prepared from coconut shells by carbonization process at 400°C for 3, 4 and 5 hours.Theresulted sample mass was reduced to be 60% relativelycompared to the starting material. The longer heating duration has also led to the rGO with reduced crystalinity according to the X-ray diffractometry data and TEM. The rGO solution was prepared by adding powders of 5, 10 and 15 grams into 50 ml destiled water and then centrifused at 6000 rpm for 30 minutes.The resulted solutions were seen to be varied form clear transparant, light and dark yellow to black. Measurement using particle size analyser shows that the individual rGO particles tends to be agglomerating each others to form bigger size clustering, manifested by the observed bigger size particles for the increasing amount of soluted rGO powders in water.The varying UV-visible spectra of these rGO solutions together with their optical bandgaps will also be discussed in this study.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Spatially resolved structural order in low-temperature liquid electrolyte

Determining the degree and the spatial extent of structural order in liquids is a grand challenge. Here, we are able to resolve the structural order in a model organic electrolyte of 1 M lithium hexafluorophosphate (LiP 6 ) dissolved in 1:1 (v/v) ethylene carbonate:diethylcarbonate by developing an integrated method of liquid-phase transmission electron microscopy (TEM), cryo-TEM operated at -30°C, four-dimensional scanning TEM, and data analysis based on deep learning. This study reveals the presence of short-range order (SRO) in the high–salt concentration domains of the liquid electrolyte from liquid phase separation at the low temperature. Molecular dynamics simulations suggest the SRO originates from the Li + - (PF 6 - ) n (n > 2) local structural order induced by high LiP 6 salt concentration.

42 ENGINEERING↗
DOE OSTI2013

Whole-Cell Analysis of Low-Density Lipoprotein Uptake by Macrophages Using STEM Tomography

Nanoparticles of heavy materials such as gold can be used as markers in quantitative electron microscopic studies of protein distributions in cells with nanometer spatial resolution. Studying nanoparticles within the context of cells is also relevant for nanotoxicological research. Here, we report a method to quantify the locations and the number of nanoparticles, and of clusters of nanoparticles inside whole eukaryotic cells in three dimensions using scanning transmission electron microscopy (STEM) tomography. Whole-mount fixed cellular samples were prepared, avoiding sectioning or slicing. The level of membrane staining was kept much lower than is common practice in transmission electron microscopy (TEM), such that the nanoparticles could be detected throughout the entire cellular thickness. Tilt-series were recorded with a limited tilt-range of 80° thereby preventing excessive beam broadening occurring at higher tilt angles. The 3D locations of the nanoparticles were nevertheless determined with high precision using computation. The obtained information differed from that obtained with conventional TEM tomography data since the nanoparticles were highlighted while only faint contrast was obtained on the cellular material. Similar as in fluorescence microscopy, a particular set of labels can be studied. This method was applied to study the fate of sequentially up-taken low-density lipoprotein (LDL) conjugated to gold nanoparticles in macrophages. Analysis of a 3D reconstruction revealed that newly up-taken LDL-gold was delivered to lysosomes containing previously up-taken LDL-gold thereby forming onion-like clusters.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Polytypism in semi-disordered lizardite and amesite by low-dose HAADF-STEM

Serpentine minerals exert important controls on the physical properties of ultramafic rocks and have the potential to influence deformation phenomena in fault zones and to control the release of water in subducted slabs. Sheet serpentine generally, and lizardite and amesite specifically, can adopt alternative crystallographic stacking arrangements called polytypes. Polytypism has been extensively studied in fully ordered crystals, but it remains largely enigmatic in the more common semi-disordered crystals that in long-range analyses such as X-ray diffraction only exhibit random combinations of 0b and ±1/3b interlayer shifts. To date, atomic-resolution imaging to identify locally ordered polytypes has been precluded by the beam-sensitive nature of this hydrous magnesium silicate mineral. Here, in this study, we employed low-dose high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) to study the polytypic structure of semi-disordered lizardite and amesite. Because the electron dose was as low as ~6000 e–/Å 2 , it was possible to directly resolve oxygen atomic columns and all the cations with a resolution of ~1 Å and reveal the short-range order. For lizardite, we identified long-period non-standard polytypes, including examples with 3, 4, 8, and 9 layers stemming from the ordering of the octahedral tilt along the a-axis. For amesite, we found short-range ordered polytypes with periodicities of up to 42 Å stemming from the ordering of interlayer shifts along the b-axis. The resolution was sufficient to determine the relative abundance of 6R 2 , 6R 1 , 2H 1 , and 2H 2 polytypes in amesite to be 46.1, 29.6, 7.7, and 1.9%, respectively. This is contrary to the expectation that the most common form of amesite is the 2H 2 polytype, which may be more likely to form macroscopic crystals suitable for conventional X-ray diffraction-based studies. We conclude that HAADF-STEM methods open the way for the characterization of beam-sensitive minerals and to resolve the structural details of less well-ordered (but possibly more abundant) minerals at a unit-cell scale.

58 GEOSCIENCES↗
DOE OSTI2017

Improving Mitigation of the Long-Term Legacy of Mining Activities: Nano- and Molecular-Level Concepts and Methods

Mining activities over several millennia have resulted in a legacy of environmental contamination that must be mitigated to minimize ecosystem damage and human health impacts. Designing effective remediation strategies for mining and processing wastes requires knowledge of nano- and molecular-scale speciation of contaminants. In this work, we discuss how modern nano- and molecular-level concepts and methods can be used to improve risk assessment and future management of contaminants that result from mining activities, and we illustrate this approach using relevant case studies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2014

Report for in-situ 7 Li NMR experiment in PNNL, Phase-1

To understand the detailed local structural evolution, an in-situ 7 Li NMR study was performed. An operando identification of the lithium germanide phases under various cycling regimens permitted understanding of the kinetics of phase transition between different structural phases, including the amorphous phases, and how these correlated with capacity retention. Combining data from TEM and in-situ 7 Li NMR, we discovered that the phase inter-conversion during cycling was mediated by co-existing amorphous and crystalline phases, and that the high capacity observed was correlated with an over-lithiated lithium germanide phase.

Hu, Jian Zhi↗
NASA NTRS1996

Dissolution kinetics of a lunar glass simulant at 25 degrees C: the effect of pH and organic acids

The dissolution kinetics of a simulated lunar glass were examined at pH 3, 5, and 7. Additionally, the pH 7 experiments were conducted in the presence of citric and oxalic acid at concentrations of 2 and 20 mM. The organic acids were buffered at pH 7 to examine the effect of each molecule in their dissociated form. At pH 3, 5, and 7, the dissolution of the synthetic lunar glass was observed to proceed via a two-stage process. The first stage involved the parabolic release of Ca, Mg, Al, and Fe, and the linear release of Si. Dissolution was incongruent, creating a leached layer rich in Si and Ti which was verified by transmission electron microscopy (TEM). During the second stage the release of Ca, Mg, Al, and Fe was linear. A coupled diffusion/surface dissolution model was proposed for dissolution of the simulated lunar glass at pH 3, 5, and 7. During the first stage the initial release of mobile cations (i.e., Ca, Mg, Al, Fe) was limited by diffusion through the surface leached layer of the glass (parabolic release), while Si release was controlled by the hydrolysis of the Si-O-Al bonds at the glass surface (linear release). As dissolution continued, the mobile cations diffused from greater depths within the glass surface. A steady-state was then reached where the diffusion rate across the increased path lengths equalled the Si release rate from the surface. In the presence of the organic acids, the dissolution of the synthetic lunar glass proceeded by a one stage process. The release of Ca, Mg, Al, and Fe followed a parabolic relationship, while the release of Si was linear. The relative reactivity of the organic acids used in the experiments was citrate > oxalate. A thinner leached layer rich in Si/Ti, as compared to the pH experiments, was observed using TEM. Rate data suggest that the chemisorption of the organic anion to the surface silanol groups was responsible for enhanced dissolution in the presence of the organic acids. It is proposed that the increased rate of Si release is responsible for the one stage parabolic release of mobile cations and the relatively thin leached layer compared to experiments at pH 3 and 5.

NASA Discipline Life Support Systems↗
DOE OSTI2023

Using Multiple Geophysical Methods to Refine a Stratigraphic Conceptual Site Model at a Nuclear Waste Site

At contaminated sites, there is a critical reliance on conceptual site models of which a key component is the geologic framework model (GFM), which is used to build predictive fate and transport modeling in support of remediation goals. Here, we detail an ongoing study at a nuclear waste site (Hanford Site, Washington, USA) where surface geophysical methods were used to complement existing borehole information and to help site new boreholes to update and refine the GFM. Ground-based electrical resistivity tomography (ERT), time-domain electromagnetics (TEM), and seismic data was acquired on the Hanford Site’s Central Plateau, where the presence of a hydraulically transmissive subsurface feature, or paleochannel, was suspected but uncertain based on contaminant concentrations at sparsely located boreholes. To assess and compare ERT, TEM, and seismic geophysical datasets, co-located data was acquired in an area where the existing GFM was more certain. Surrounding the suspected paleochannel, ERT and seismic refraction tomography showed similar subsurface structures consistent with a channelized feature. While TEM interpretation was limited in the suspected paleochannel area due to a thick resistive top layer and high electromagnetic noise, TEM showed greater utility in a different area where these factors were less prevalent. Based on the results of quasi-3D ERT inversions, we propose updates to the GFM, including identifying a paleochannel. Further, we evaluate the utility of geophysical methods and examine lessons learned that will be used as a basis for continued characterization efforts to support site management decisions and implementation efforts.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2016

Precession electron diffraction for SiC grain boundary characterization in unirradiated TRISO fuel

Precession electron diffraction (PED), a transmission electron microscopy-based technique, has been evaluated for the suitability for evaluating grain boundary character in the SiC layer of tristructural isotropic (TRISO) fuel. Although the ultimate goal is to determine the grain boundary characteristics of fission product containing grain boundaries of neutron irradiated SiC, our work reports the effect of transmission electron microscope (TEM) lamella thickness on quality of data and establishes a baseline comparison on grain boundary characteristics determined previously using a conventional EBSD scanning electron microscope (SEM) based technique. In general, it was determined that the lamella thickness produced using the standard FIB fabrication process, is sufficient to provide reliable PED measurements with thicker lamellae (~120 nm) produce higher quality orientation data. Analysis of grain boundary character from the TEM-based PED data showed a much lower fraction of low angle grain boundaries compared to SEM-based EBSD data from the SiC layer of the same TRISO-coated particle as well as a SiC layer deposited at a slightly lower temperature. The fractions of high angle and CSL-related grain boundaries determined by PED are similar to those found using SEM-based EBSD. Since the grain size of the SiC layer of TRSIO fuel can be as small as 250 nm [12], depending on the fabrication parameters, and grain boundary fission product precipitates can be nano-sized, the TEM-based PED orientation data collection method is preferred to determine an accurate representation of the relative fractions of low angle, high angle and CSL-related grain boundaries. It was concluded that although the resolution of the PED data is better by more than an order of magnitude, data acquisition times may be significantly longer or the number of areas analyzed significantly larger than the SEM-based method to obtain a statistically relevant distribution. Also, grain size could be accurately determined but significantly larger analysis areas than those used in this study would be required.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2016

SU-F-T-468: Efficient Scanning Data Analysis for TomoTherapy

Purpose: The standard TomoTherapy 2D scanning system requires manual analysis using spreadsheets or similar software. Manual analysis is time consuming and does not allow efficient use of the medical physicist or timely results that may indicate issues during the acquisition of data. The purpose of this study is to determine if an in-house solution can provide timely analysis of TomoTherapy scan data. Methods: A custom MATLAB program utilizing a streamlined graphical interface was developed to interpret the native scanning data acquired by the TomoTherapy Electrometer Measurement System (TEMS). The gold beam data provided by the manufacturer was used as a baseline for the acquired data. Two separate sets of scan data were used including longitudinal, transverse, and percent depth dose (PDD). The scan data were compared visually in an overlay and analytically for each beam width using the full width half max (FWHM) for longitudinal profiles and difference inside the field core for the transverse profiles as recommended by TG-148. A plot of the PDD percent error at each point along the curve was generated to show agreement. The time to analysis was measured on a laptop running an Intel i5 processor with 8GB of RAM. Results: The software program required on average less than 5 seconds to load and analyze the results. No conversion or reformatting of the data was required. This allowed real-time visualization of the comparison to the gold beam data as well as the parameters recommended by TG-148. The average percent difference was 0.3% for the longitudinal profiles and 0.1% for the transverse profiles. All PDD data was less than 1% different beyond dmax. Conclusion: We have developed a tool to analyze TomoTherapy scan data in real-time. This allows an efficient method to perform beam commissioning, annual QA, and adjust the beam parameters if necessary.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2021

Use of Transmission Electron Microscopy for Analysis of Aerosol Particles and Strategies for Imaging Fragile Particles

For over 25 years, transmission electron microscopy (TEM) has provided a method for the study of aerosol particles with sizes from below the optical diffraction limit to several microns, resolving the particles as well as smaller features. The wide use of this technique to study aerosol particles has contributed important insights about environmental aerosol particle samples and model atmospheric systems. TEM produces an image that is a 2D projection of aerosol particles that have been impacted onto grids and, through associated techniques and spectroscopies, can contribute additional information such as the determination of elemental composition, crystal structure, and 3D particle structures. Soot, mineral dust, and organic/inorganic particles have all been analyzed using TEM and spectroscopic techniques. TEM, however, has limitations that are important to understand when interpreting data including the ability of the electron beam to damage and thereby change the structure and shape of particles, especially in the case of particles composed of organic compounds and salts. In this paper, we concentrate on the breadth of studies that have used TEM as the primary analysis technique. Another focus is on common issues with TEM and cryogenic-TEM. Insights for new users on best practices for fragile particles, that is, particles that are easily susceptible to damage from the electron beam, with this technique are discussed. Tips for readers on interpreting and evaluating the quality and accuracy of TEM data in the literature are also provided and explained.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Study of surface morphology and alignment of MWCNTs grown by chemical vapor deposition

In this research work, Multiwalled Carbon Nanotubes (MWCNTs) have been synthesized successfully by using floating catalytic chemical vapor deposition (FCCVD) method. Different ferrocene amounts (0.1, 0.125 and 0.15 g) were used as catalyst and ethylene was used as a carbon precursor at reaction temperature of 800°C. Characterization of the grown MWCNTs was carried out by using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The obtained data showed that the catalyst weight affects the nanotubes diameter, alignment, crystallinity and growth significantly, whereas negligible influence was noticed on CNTs forest length. The dense, uniform and meadow like patterns of grown CNTs were observed for 0.15 g ferrocene. The average diameter of the grown CNTs was found in the range of 32 to 75 nm. Close inspection of the TEM images also confirmed the defects in some of the grown CNTs, where few black spots were evident in CNTs structure.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2014

CdSe@ZnS nanocomposites prepared by a mechanochemical route: No release of Cd{sup 2+} ions and negligible in vitro cytotoxicity

Graphical abstract: - Highlights: • CdSe@ZnS nanocomposites were produced by milling. • Negligible cadmium leakage was observed. • No toxicity against living cells was documented. • The material is suitable for biological imaging. - Abstract: CdSe@ZnS nanocomposites have been prepared by a two-step solid state mechanochemical synthesis. CdSe prepared from Cd and Se elements in the first step was mixed with zinc acetate and sodium sulphide in the second step of milling to prepare a CdSe@ZnS nanocomposite. In the third step, the obtained nanocomposite was coated with L-cysteine to prepare a biocompatible system. The crystallite size of the new type of nanocomposite was 20–35 nm for cubic CdSe and 3–8 nm for hexagonal ZnS as calculated from XRD, TEM and SEM data. The synthesised samples show good crystallinity and have been tested for dissolution and cytotoxicity. The dissolution of cadmium from CdSe@ZnS was less than 0.05 μg mL{sup −1}, whereas a value of 0.8 μg mL{sup −1} was measured for CdSe alone. The binding of ZnS with CdSe in the nanocomposite practically eliminated the release of cadmium into solution. As a consequence, a very low cytotoxic activity has been evidenced for CdSe@ZnS. The nanocomposites coated with L-cysteine have a great potential as fluorescent labels in biomedical engineering.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Quantitative Attachment of Bimetal Combinations of Transition-Metal Ions to the Surface of TiO 2 Nanorods

Here we report the sequential, quantitative loading of transition-metal ions (Cr 3+ , Mn 2+ , Fe 2+ , Co 2+ , Ni 2+ , and Cu 2+ ) onto the surface of rod-shaped anatase TiO 2 nanocrystals in bimetallic combinations ( 6 C 2 = 15) to form M,M'-TiO 2 nanocrystals. The materials were characterized with transmission electron microscopy (TEM), powder X-ray diffraction (XRD), elemental analysis, X-ray photoelectron spectroscopy (XPS), and UV–visible spectroscopy. TEM and XRD data indicate that the sequential adsorption of metal ions occurs with the retention of the phase and morphology of the nanocrystal. Atomistic models of the M,M'-TiO 2 nanocrystals were optimized with density functional theory calculations. Calculated UV–visible absorption spectra and partial charge density maps of the donor and acceptor states for the electronic transitions indicate the importance of metal-to-metal charge transfer (MMCT) processes.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Silicon Solid Electrolyte Interphase (SEI) of Lithium Ion Battery Characterized by Microscopy and Spectroscopy

The surface reactions of electrolytes with a silicon anode in lithium ion cells have been investigated. The investigation utilizes two novel techniques that are enabled by the use of binder-free silicon (BF-Si) nanoparticle anodes. The first method, transmission electron microscopy with energy dispersive X-ray spectroscopy, allows straightforward analysis of the BF-Si solid electrolyte interphase (SEI). The second method utilizes multi-nuclear magnetic resonance spectroscopy of D2O extracts from the cycled anodes. The TEM and NMR data are complemented by XPS and FTIR data, which are routinely used for SEI studies. Coin cells (BF-Si/Li) were cycled in electrolytes containing LiPF6 salt and ethylene carbonate or fluoroethylene carbonate solvent. Capacity retention was significantly better for cells cycled with LiPF6/FEC electrolyte than for cells cycled with LiPF6/EC electrolyte. Our unique combination of techniques establishes that for LiPF6/EC electrolyte the BF-Si SEI continuously grows during the first 20 cycles and the SEI becomes integrated with the BF-Si nanoparticles. The SEI predominantly contains lithium ethylene dicarbonate, LiF, and LixSiOy. BF-Si electrodes cycled with LiPF6/FEC electrolyte have a different behavior; the BF-Si nanoparticles remain relatively distinct from the SEI. The SEI predominantly contains LiF, LixSiOy, and an insoluble polymeric species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

The magnetic transition in ε-Fe{sub 2}O{sub 3} nanoparticles: Magnetic properties and hyperfine interactions from Mössbauer spectroscopy

The nanoparticles of ε-Fe{sub 2}O{sub 3} enriched with {sup 57}Fe isotope in amorphous silica matrix were prepared by sol-gel technique starting from a single molecular precursor for both Fe{sub 2}O{sub 3} and silica. From the X-ray powder diffraction pattern ε-Fe{sub 2}O{sub 3} was identified as the major phase and α-Fe{sub 2}O{sub 3} and β-Fe{sub 2}O{sub 3} were observed as minor iron oxide phases. Using the log-normal distribution for fitting the experimental data from the TEM micrographs, the characteristic size of particles d{sub 0} ∼ 25 nm was derived. The rather high coercivity of ∼2.1 T at room temperature was confirmed for our nanoparticle system. From the dependences of magnetization on temperature a two-step magnetic transition spread between 100 K and 153 K was indicated. From the {sup 57}Fe Mössbauer spectra measured in the temperature range of 4.2–300 K, the hyperfine parameters for one tetrahedral and three octahedral sites of ε-Fe{sub 2}O{sub 3} structure were identified. The in-field spectra in the external magnetic fields up to 6 T were taken both above and below the indicated two-step magnetic transition. Their dependence on temperature and external magnetic field suggests that the first step in the temperature range of 153 K–130 K is related to the spin reorientation of the local magnetic moments in the magnetic sublattices and the second step in temperatures 130 K–100 K may be associated with the intermediate spin–high spin state transition of Fe{sup 3+} cation in the tetrahedral sublattice expressed in the change of the hyperfine magnetic field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗