Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TAG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Search for nonresonant new physics signals in high-mass dilepton events produced in association with b-tagged jets in proton-proton collisions at $\sqrt{s}=13$ TeV

A search for nonresonant new physics phenomena in high-mass dilepton events produced in association with b-tagged jets is performed using proton-proton collision data collected in 2016–2018 by the CMS experiment at the CERN LHC, at a center-of-mass energy of 13 TeV corresponding to an integrated luminosity of 138 fb −1 . The analysis considers two effective field theory models with dimension-six operators; involving four-fermion contact interactions between two leptons (ℓℓ, electrons or muons) and b or s quarks (bbℓℓ and bsℓℓ). Two lepton flavor combinations (ee and μμ) are required and events are classified as having 0, 1, or ≥2 b-tagged jets in the final state. No significant excess is observed over the standard model backgrounds. Upper limits are set on the production cross section of the new physics signals. These translate into lower limits on the energy scale Λ of 6.9 to 9.0 TeV in the bbℓℓ model, depending on model parameters, and on the ratio of energy scale and effective coupling, Λ/g*, of 2.0 to 2.6 TeV in the bsℓℓ model. Lepton flavor universality is also tested by comparing the dielectron (ee) and dimuon (μμ) mass spectra for different b-tagged jet multiplicities. No significant deviation from the standard model expectation of unity is observed.

Beyond Standard Model↗
DOE OSTI2024

Demonstration of Capture, Cooling, Tagging, and Spectroscopic Characterization of UV Photoproduct Ions in a Cryogenic Ion Trap: Application to 266 nm Photofragment Ions from Rhodamine 6G

We demonstrate a method to determine the structures of the primary photodissociation products from a cryogenically cooled parent ion. In this approach, a target ion is cooled by a pulse of buffer gas and tagged in a 20 K Paul trap. The cold ion is then photodissociated by pulsed (~5 ns) UV laser excitation, and the ionic products are trapped, cooled, and tagged by introduction of a second buffer gas pulse in the same trap. The tagged fragments are then ejected into a triple focusing, UV/vis/IR time-of-flight photofragmentation mass spectrometer which yields vibrational and electronic spectra of the mass-selected photofragments. Furthermore, these methods are demonstrated by application to the 266 nm photodissociation of the Rhodamine 6G cation to yield the R575 fragment ion based on loss of ethene as well as to a weaker secondary fragment arising from loss of m/z 43.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Transforming jet flavour tagging at ATLAS

Jet flavour tagging enables the identification of jets originating from heavy-flavour quarks in proton–proton collisions at the Large Hadron Collider, playing a critical role in its physics programmes. This paper presents GN2, a transformer-based flavour tagging algorithm deployed by the ATLAS Collaboration that represents a different methodology compared to previous approaches. Designed to classify jets based on the flavour of their constituent particles, GN2 processes low-level tracking information in an end-to-end architecture and incorporates physics-informed auxiliary training objectives to enhance both interpretability and performance. Its performance is validated in both simulation and collision data. The measured c-jet (light-jet) rejection in data is improved by a factor of 3.5 (1.8) for a 70% b-jet tagging efficiency, compared to the previous algorithm. GN2 provides substantial benefits for physics analyses involving heavy-flavour jets, such as measurements of Higgs boson pair production and the couplings of bottom and charm quarks to the Higgs boson, and demonstrates the impact of advanced machine learning methods in experimental particle physics.

Characterization and analytical techniques↗
DOE OSTI2024

Accuracy versus precision in boosted top tagging with the ATLAS detector

The identification of top quark decays where the top quark has a large momentum transverse to the beam axis, known as top tagging , is a crucial component in many measurements of Standard Model processes and searches for beyond the Standard Model physics at the Large Hadron Collider. Machine learning techniques have improved the performance of top tagging algorithms, but the size of the systematic uncertainties for all proposed algorithms has not been systematically studied. This paper presents the performance of several machine learning based top tagging algorithms on a dataset constructed from simulated proton-proton collision events measured with the ATLAS detector at $\sqrt{s}$ = 13 TeV. The systematic uncertainties associated with these algorithms are estimated through an approximate procedure that is not meant to be used in a physics analysis, but is appropriate for the level of precision required for this study. The most performant algorithms are found to have the largest uncertainties, motivating the development of methods to reduce these uncertainties without compromising performance. To enable such efforts in the wider scientific community, the datasets used in this paper are made publicly available.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Crystal structure of N-terminally hexahistidine-tagged Onchocerca volvulus macrophage migration inhibitory factor-1

Onchocerca volvulus causes blindness, onchocerciasis, skin infections and devastating neurological diseases such as nodding syndrome. New treatments are needed because the currently used drug, ivermectin, is contraindicated in pregnant women and those co-infected with Loa loa . The Seattle Structural Genomics Center for Infectious Disease (SSGCID) produced, crystallized and determined the apo structure of N-terminally hexahistidine-tagged O. volvulus macrophage migration inhibitory factor-1 (His- Ov MIF-1). Ov MIF-1 is a possible drug target. His- Ov MIF-1 has a unique jellyfish-like structure with a prototypical macrophage migration inhibitory factor (MIF) trimer as the `head' and a unique C-terminal `tail'. Deleting the N-terminal tag reveals an Ov MIF-1 structure with a larger cavity than that observed in human MIF that can be targeted for drug repurposing and discovery. Removal of the tag will be necessary to determine the actual biological oligomer of Ov MIF-1 because size-exclusion chomatographic analysis of His- Ov MIF-1 suggests a monomer, while PISA analysis suggests a hexamer stabilized by the unique C-terminal tails.

Kimble, Amber D. (ORCID:0000000167851596)↗
DOE OSTI2024

Interpreting and Accelerating Transformers for Jet Tagging

Attention-based transformers are ubiquitous in machine learning applications from natural language processing to computer vision. In high energy physics, one central application is to classify collimated particle showers in colliders based on the particle of origin, known as jet tagging. In this work, we study the interpretatbility and prospects for acceleration of Particle Transformer (ParT), a state-of-the-art model, leverages particle-level attention to improve jet-tagging performance. We analyzing ParT's attention maps and particle-pair correlations in the eta-phi plane, revealing intriguing features, such as a binary attention pattern that identifies critical substructure in jets. These insights enhance our understanding of the model's internal workings and learning process and hint at ways to improve its efficiency. Along these lines, we also explore low-rank attention, attention alternatives, and dynamic quantization to accelerate transformers for jet tagging. With quantization, we achieve a 50% reduction in model size and a 10% increase in inference speed without compromising accuracy. These combined efforts enhance both the performance and the interpretability of transformers in high-energy physics, opening avenues for more efficient and physics-driven model designs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS2003

Tagging Water Sources in Atmospheric Models

Tagging of water sources in atmospheric models allows for quantitative diagnostics of how water is transported from its source region to its sink region. In this presentation, we review how this methodology is applied to global atmospheric models. We will present several applications of the methodology. In one example, the regional sources of water for the North American Monsoon system are evaluated by tagging the surface evaporation. In another example, the tagged water is used to quantify the global water cycling rate and residence time. We will also discuss the need for more research and the importance of these diagnostics in water cycle studies.

Bosilovich, M.↗
NASA NTRS2010

Multiple Velocity Profile Measurements in Hypersonic Flows using Sequentially-Imaged Fluorescence Tagging

Nitric-oxide planar laser-induced fluorescence (NO PLIF) was used to perform velocity measurements in hypersonic flows by generating multiple tagged lines which fluoresce as they convect downstream. For each laser pulse, a single interline, progressive scan intensified CCD camera was used to obtain separate images of the initial undelayed and delayed NO molecules that had been tagged by the laser. The CCD configuration allowed for sub-microsecond acquisition of both images, resulting in sub-microsecond temporal resolution as well as sub-mm spatial resolution (0.5-mm x 0.7-mm). Determination of axial velocity was made by application of a cross-correlation analysis of the horizontal shift of individual tagged lines. Quantification of systematic errors, the contribution of gating/exposure duration errors, and influence of collision rate on fluorescence to temporal uncertainty were made. Quantification of the spatial uncertainty depended upon the analysis technique and signal-to-noise of the acquired profiles. This investigation focused on two hypersonic flow experiments: (1) a reaction control system (RCS) jet on an Orion Crew Exploration Vehicle (CEV) wind tunnel model and (2) a 10-degree half-angle wedge containing a 2-mm tall, 4-mm wide cylindrical boundary layer trip. The experiments were performed at the NASA Langley Research Center's 31-inch Mach 10 wind tunnel.

Bathel, Brett F.↗
NASA NTRS2010

Multiple Velocity Profile Measurements in Hypersonic Flows Using Sequentially-Imaged Fluorescence Tagging

Nitric-oxide planar laser-induced fluorescence (NO PLIF) was used to perform velocity measurements in hypersonic flows by generating multiple tagged lines which fluoresce as they convect downstream. For each laser pulse, a single interline, progressive scan intensified CCD (charge-coupled device) camera was used to obtain two sequential images of the NO molecules that had been tagged by the laser. The CCD configuration allowed for sub-microsecond acquisition of both images, resulting in sub-microsecond temporal resolution as well as sub-mm spatial resolution (0.5-mm horizontal, 0.7-mm vertical). Determination of axial velocity was made by application of a cross-correlation analysis of the horizontal shift of individual tagged lines. A numerical study of measured velocity error due to a uniform and linearly-varying collisional rate distribution was performed. Quantification of systematic errors, the contribution of gating/exposure duration errors, and the influence of collision rate on temporal uncertainty were made. Quantification of the spatial uncertainty depended upon the signal-to-noise ratio of the acquired profiles. This velocity measurement technique has been demonstrated for two hypersonic flow experiments: (1) a reaction control system (RCS) jet on an Orion Crew Exploration Vehicle (CEV) wind tunnel model and (2) a 10-degree half-angle wedge containing a 2-mm tall, 4-mm wide cylindrical boundary layer trip. The experiments were performed at the NASA Langley Research Center's 31-Inch Mach 10 Air Tunnel.

Bathel, Brett F.↗
NASA NTRS2013

Iodine Tagging Velocimetry and Mechanism in the Hypersonic Near Wake of a MultiPurpose Crew Vehicle

This study demonstrates a new molecular tagging velocimetry (MTV) method for velocity measurements of high speed flow. It demonstrates offbody Iodine Tagging Velocimetry (ITV) in the hypersonic near wake of a MultiPurpose Crew Vehicle (MPCV) model. Experiments are performed in the NASA-Langley 31-inch Mach 10 air wind tunnel. A 0.5% I2 / N2 mixture is seeded on the leeward backshell of the model using a pressure tap. I2 laser-induced fluorescence is excited along a 5.5 mm line using an ArF excimer laser near 193 nm. Results indicate I2 absorbs at least 2 photons to produce iodine ions and electrons. These recombine as the tagged region is displaced downstream to produce I (2P3/2) whose emission is monitored at 206 nm. Results at P0 = 2.41 MPa (350 psi), T0 = 990K, and 10 micro-sec transit times produce velocities from 630-820 m/sec across the I2 seeded jet at a distance of 38.2 mm (25.5 jet diameters) downstream from the jet orifice. Maximum wake jet velocities near the shear layer are 59% of freestream velocity.

Balla, R. Jeffrey↗
NASA NTRS2017

Systems, Apparatuses and Methods for Beamforming RFID Tags

A radio frequency identification (RFID) system includes an RFID interrogator and an RFID tag having a plurality of information sources and a beamforming network. The tag receives electromagnetic radiation from the interrogator. The beamforming network directs the received electromagnetic radiation to a subset of the plurality of information sources. The RFID tag transmits a response to the received electromagnetic radiation, based on the subset of the plurality of information sources to which the received electromagnetic radiation was directed. Method and other embodiments are also disclosed.

Fink, Patrick W.↗
NASA NTRS2018

Systems and Methods for Beam Forming RFID Tags

A radio frequency identification (RFID) system includes an RFID interrogator and an RFID tag having a plurality of information sources and a beamforming network. The tag receives electromagnetic radiation from the interrogator. The beamforming network directs the received electromagnetic radiation to a subset of the plurality of information sources. The RFID tag transmits a response to the received electromagnetic radiation, based on the subset of the plurality of information sources to which the received electromagnetic radiation was directed. Method and other embodiments are also disclosed.

Fink, Patrick W.↗
NASA NTRS2018

Tagging Components in the Test Complex Area

Why tag components differently? - Various methods are in place to tag different components, but not every component is tracked; - Variance in method can make it difficult to obtain component information and identify discrepancies; -Time and resources are spent on component localization and verification. Previous work of RA10 interns: - Researching more efficient asset tracking methods; - Investigating cost effective ways to localize components; - Past interns identified using QR (Quick Response) codes as a potential solution. Link QR codes to Windchill (PLM - Product Lifecycle Management system) DDMS (Design and Data Management System) after QR code is printed/etched and physically tagging it as quickly as possible

Gomez, Sarah↗
NASA NTRS2022

Lunar Thermal Analysis Guidebook (L-TAG): Thermo-physical and Optical Properties of Lunar Regolith

The purpose of the Human Landing System (HLS) Lunar Thermal Analysis Guidebook (L-TAG) is to provide guidance to experienced thermal engineering personnel on how to conduct worst-case hot and cold lunar thermal analyses for the design of HLS hardware in both lunar orbit and lunar surface environments. The HLS L-TAG will include pointers to the Cross-Program Design Specification for Natural Environments (DSNE), SLS-SPEC-159, and best practices/approaches for interpreting and complying with the DSNE lunar thermal environments in the analysis of HLS spacecraft, vehicles and systems. The HLS L-TAG is a reference document that is available to all HLS thermal analysts. In the event of a conflict with the descriptions provided herein, the DSNE takes precedence. This document represents the best available information at the time of publication and will undergo updates as the HLS program evolves. Feedback from the user community is encouraged to support further refinement of the Guidebook.

Thermal Analysis↗
NASA NTRS2022

Lunar Thermal Analysis Guidebook (L-TAG)

The purpose of the Human Landing System (HLS) Lunar Thermal Analysis Guidebook (L-TAG) is to provide guidance to experienced thermal engineering personnel on how to conduct worst-case hot and cold lunar thermal analyses for the design of HLS hardware in both lunar orbit and lunar surface environments. The HLS L-TAG will include pointers to the Cross-Program Design Specification for Natural Environments (DSNE), SLS-SPEC-159, and best practices/approaches for interpreting and complying with the DSNE lunar thermal environments in the analysis of HLS spacecraft, vehicles and systems. The HLS L-TAG is a reference document that is available to all HLS thermal analysts. In the event of a conflict with the descriptions provided herein, the DSNE takes precedence. This document represents the best available information at the time of publication and will undergo updates as the HLS program evolves. Feedback from the user community is encouraged to support further refinement of the Guidebook.

Thermal Analysis↗
NASA NTRS2022

Lunar Thermal Analysis Guidebook (L-TAG)

The purpose of the Human Landing System (HLS) Lunar Thermal Analysis Guidebook (L-TAG) is to provide guidance to experienced thermal engineering personnel on how to conduct worst-case hot and cold lunar thermal analyses for the design of HLS hardware in both lunar orbit and lunar surface environments. The HLS L-TAG will include pointers to the Cross-Program Design Specification for Natural Environments (DSNE), SLS-SPEC-159, and best practices/approaches for interpreting and complying with the DSNE lunar thermal environments in the analysis of HLS spacecraft, vehicles and systems. The HLS L-TAG is a reference document that is available to all HLS thermal analysts. In the event of a conflict with the descriptions provided herein, the DSNE takes precedence. This document represents the best available information at the time of publication and will undergo updates as the HLS program evolves. Feedback from the user community is encouraged to support further refinement of the Guidebook.

Thermal Analysis↗
DOE OSTI2025

An approach for spent nuclear fuel containment integrity verification using gas tagging

Verification of containment integrity is required for spent nuclear fuel (SNF) managed by the commercial nuclear industry and U.S. Department of Energy (DOE), especially after extended storage. Certain SNF storage systems, such as the DOE road-ready dry storage system, hold several packaged containments within a welded over-canister. These packaged containments are called Department of Energy Standard Canisters (DOESCs). DOESC leakage identification is challenging because their containment boundary cannot be accessed for testing and their contents (i.e., SNF and fill gas) are often similar. There are concerns that this could result in costly characterization and repackaging operations of DOE road-ready dry storage systems if compromised DOESCs are suspected. Here, to address these concerns, this paper presents an approach for applying a gas tagging process using xenon to uniquely identify compromised inaccessible containments following extended storage. The containments considered for this application are seven DOESCs, each packaged within a single over-canister. Two different SNF loading configurations from the Advanced Test Reactor and Fort Saint Vrain nuclear power plant are considered. These configurations are used to represent research reactor aluminum-clad spent nuclear fuel (ASNF) and TRi-structural ISOtropic (TRISO) SNF types. Results for this application show that for ASNF and TRISO type fuels for which the selected fuels are representative, the volume of taggant required at loading is determined primarily by the lower detection limit and leak rate of taggant from a compromised DOESC, rather than the amount of fission-generated xenon in the loaded fuel. While the application presented is suited for larger leaks, smaller leaks could be detected by modifying certain design parameters. This gas tagging approach can also be applied to other DOE containments and advanced reactor SNF storage systems.

07 - ISOTOPES AND RADIATION SOURCES↗
DOE OSTI2024

Ion Manipulation from Liquid Xe to Vacuum: Ba-Tagging for a nEXO Upgrade and Future 0 νββ Experiments

Neutrinoless double beta decay (0𝜈𝛽𝛽) provides a way to probe physics beyond the Standard Model of particle physics. The upcoming nEXO experiment will search for 0𝜈𝛽𝛽 decay in 136 Xe with a projected half-life sensitivity exceeding 10 28 years at the 90% confidence level using a liquid xenon (LXe) Time Projection Chamber (TPC) filled with 5 tonnes of Xe enriched to ∼90% in the 𝛽𝛽-decaying isotope 136 Xe. In parallel, a potential future upgrade to nEXO is being investigated with the aim to further suppress radioactive backgrounds and to confirm 𝛽𝛽-decay events. This technique, known as Ba-tagging, comprises extracting and identifying the 𝛽𝛽-decay daughter 136 Ba ion. One tagging approach being pursued involves extracting a small volume of LXe in the vicinity of a potential 𝛽𝛽-decay using a capillary tube and facilitating a liquid-to-gas phase transition by heating the capillary exit. The Ba ion is then separated from the accompanying Xe gas using a radio-frequency (RF) carpet and RF funnel, conclusively identifying the ion as 136 Ba via laser-fluorescence spectroscopy and mass spectrometry. Simultaneously, an accelerator-driven Ba ion source is being developed to validate and optimize this technique. The motivation for the project, the development of the different aspects, along with the current status and results, are discussed here.

a-tagging↗