Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surface observations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Observed Land Surface Influence on Atmospheric Heat and Moisture Profiles During Interstorms

Land-atmospheric (L-A) feedbacks have historically been studied using models whose structure and parameterizations influence outcomes and insights. The representation of L-A feedbacks based on observations alone remains an ongoing challenge for understanding boundary layer development and precipitation. To address this gap, we use ground-based passive remote sensing and in-situ observations to present an analysis of the atmosphere during 103 interstorm soil moisture drydown events spanning nine warm seasons (2016–2024) in the U.S. Southern Great Plains region. By separating events based on local L-A coupling signals and characterizing the profiles of atmospheric heat and moisture to surface energy flux behavior, we investigate the physical mechanisms linking land surface processes to boundary layer development. We find that during interstorm drydowns, the atmospheric column follows a consistent pattern: moisture increases within the boundary layer, peaks near its top, and declines rapidly above, while warming occurs through the depth. Drydowns that shift toward evaporation produce stronger and deeper thermodynamic responses than cases dominated by sensible heating, which are weaker and shallower. Additionally, moisture is accumulated faster within the boundary layer during shorter drydowns, with longer drydowns representing slower, moisture-limited growth. Drydowns with wetter initial soil moisture will sustain stronger moistening within and above the boundary layer, accelerating buoyancy growth and convective potential toward the next storm. These results provide observational evidence linking surface flux evolution to boundary layer thermodynamics and offer a process-level benchmark for evaluating coupled L-A representations in models and demonstrating the influence of soil moisture on short-term weather forecasting skill.

Zhang, M. S. [Massachusetts Inst. of Technology (M↗
DOE OSTI2022

Impacts of active satellite sensors' low-level cloud detection limitations on cloud radiative forcing in the Arctic

Previous studies revealed that satellites sensors with the best detection capability identify 25 %–40 % and 0 %–25 % fewer clouds below 0.5 and between 0.5–1.0 km, respectively, over the Arctic. Quantifying the impacts of cloud detection limitations on the radiation flux are critical especially over the Arctic Ocean considering the dramatic changes in Arctic sea ice. In this study, the proxies of the space-based radar, CloudSat, and lidar, CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations), cloud masks are derived based on simulated radar reflectivity with QuickBeam and cloud optical thickness using retrieved cloud properties from surface-based radar and lidar during the Surface Heat Budget of the Arctic Ocean (SHEBA) experiment. Limitations in low-level cloud detection by the space-based active sensors, and the impact of these limitations on the radiation fluxes at the surface and the top of the atmosphere (TOA), are estimated with radiative transfer model Streamer. The results show that the combined CloudSat and CALIPSO product generally detects all clouds above 1 km, while detecting 25 % (9 %) fewer in absolute values below 600 m (600 m to 1 km) than surface observations. These detection limitations lead to uncertainties in the monthly mean cloud radiative forcing (CRF), with maximum absolute monthly mean values of 2.5 and 3.4 Wm –2 at the surface and TOA, respectively. Cloud information from only CALIPSO or CloudSat lead to larger cloud detection differences compared to the surface observations and larger CRF uncertainties with absolute monthly means larger than 10.0 Wm –2 at the surface and TOA. The uncertainties for individual cases are larger – up to 30 Wm –2 . These uncertainties need to be considered when radiation flux products from CloudSat and CALIPSO are used in climate and weather studies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Regional infrasonic observations from surface explosions – influence of atmospheric variations and realistic terrain

SUMMARY A pair of 1-ton, conventional surface explosions were conducted at the Nevada National Security Site in the fall of 2020 producing seismoacoustic signatures observable hundreds of kilometres from the source location. Regional infrasonic observations include tropospheric ducting at large distances to the south, a wide stratospheric waveguide with signals observed more than 700 km to the east, and anomalous arrivals in the stratospheric shadow zone. Notable differences in propagation between the events are identified despite the explosions being conducted just two days apart due to a sharp temporal shift in the tropospheric winds as well as structural changes in the stratospheric winds. Propagation simulations of the two events have been completed using a combination of ray tracing and parabolic equation (PE) methods. Simulations have been conducted to quantify the impact of the temporal variations in the atmosphere as well as the influence of terrain on propagation. Temporal variations in reflection locations are found to produce notable changes in downrange propagation due to spatially varying terrain features. Finite frequency effects modelled by the PE are found to predict ensonification not included in corresponding 2D ray tracing simulations. Notable variations in predicted signal amplitude are found due to focusing by along-path and cross-path terrain gradients; though, the later of these is only modelled using fully 3D ray tracing analysis.

58 GEOSCIENCES↗
DOE OSTI2024

Satellite Clear‐Sky Observations Overestimate Surface Urban Heat Islands in Humid Cities

Satellite-based thermal infrared (TIR) land surface temperature (LST) is hindered by cloud cover and is applicable solely under clear-sky conditions for estimating surface urban heat island intensity (SUHII). Clear-sky SUHII may not accurately represent all-sky conditions, potentially introducing quantitative biases in assessing urban heat islands. However, the differences between clear-sky and all-sky SUHIIs and their spatiotemporal variations are still poorly understood. Our analysis of over 600 global cities demonstrates that clear-sky SUHII is mostly higher than all-sky SUHII, particularly in summer, daytime, and precipitation-rich regions. Besides, clear-sky SUHII typically exhibits stronger seasonal and diurnal contrasts than all-sky SUHII, especially for cities located in humid regions. These discrepancies can be attributed mainly to the increased missing LST data caused by cloud enhancement in urban areas. Our findings highlight the tendency for clear-sky observations to overestimate SUHII, providing valuable insights for standardizing the quantification of surface urban heat islands.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Crustal and uppermost mantle structure near the Gloria Fault, North Atlantic, from ocean bottom seismometer surface wave observations

SUMMARY In this work, we present both 1-D and 3-D shear wave velocity (Vs) models of the oceanic crust and uppermost mantle below the Deep OCean Test ARray area, located ∼ 70 km north of the central section of the Gloria Fault, in the eastern North-Atlantic Ocean. The velocity models are inferred from the dispersion of surface waves recorded on ocean bottom seismometers. Dispersion measurements are obtained from the analysis of ambient seismic noise at short periods (< 14 s) and teleseismic surface waves at long periods (> 14 s) using the two-station method. The 1-D Vs model is inferred from the joint inversion of Rayleigh wave phase velocities and Love wave group and phase velocities. The 3-D tomographic model is obtained by inversion of 2-D Love wave group velocity maps as a function of depth, further constrained by the average of Love wave phase velocities obtained from ambient noise (4–9 s) and the average Rayleigh and Love wave phase velocities calculated from teleseismic data (14–44 s). The 1-D Vs model shows a sediment layer with a low velocity of 1.05 km s−1, similar to previous studies in the region. Below the sediments, we find an oceanic crust with velocities ranging from 3.3 to 4.5 km s−1. The model reaches an unusually high velocity of 4.9 km s−1 in a 20 km thick layer at depths between 16 and 36 km. We interpret this fast velocity layer as indicative of the presence of harzburgite, a residue of enhanced melting that might have been formed by the proximity between the Mid-Atlantic Ridge and the Azores mantle plume. At greater depths the velocity decreases, forming a low-velocity zone that reaches a minimum at ∼ 70 km depth, which we interpret as the maximum depth for the lithosphere–asthenosphere boundary. The 3-D model shows a structure that is mostly horizontally layered, with Vs isocontours at 3.5–4.5 km s−1 highlighting oscillations of the crustal structure with wavelengths of ∼25–30 km. These oscillations may be due to changes in the rate of mantle upwelling and magma supply rate.

Pinzón, Juan I. (ORCID:0000000338078068)↗
DOE OSTI2023

Maximum Supersaturation in the Marine Boundary Layer Clouds Over the North Atlantic

Abstract The maximum supersaturation ( S x ) in clouds is a key parameter affecting the cloud's microphysical and radiative properties. We investigate the S x of the marine boundary layer clouds by combining airborne and surface observations in the Eastern North Atlantic. The cloud droplet number concentration ( N c ) in the least diluted cloud cores agrees well with the number concentration of particles larger than the Hoppel Minimum (HM) ( N >HM ) below clouds, indicating that the HM represents the average size threshold above which particles are activated to form cloud droplets. The S x values derived from surface observations vary from 0.10% to 0.50% from June 2017 to June 2018, with a clear seasonal variation exhibiting higher values during winter. Most of the S x variance (∼60%) can be explained by the cloud condensation nuclei (CCN) concentration and updraft velocity ( w ), with the CCN concentration playing a more important role than w in explaining the variation of S x . The influence of CCN concentration on S x leads to a buffered response of N c to aerosol perturbations. The response of N c to low aerosol concentration during winter is further buffered by the high w . The global Community Earth System Model (CESM) simulated S x values in the Azores have a positive bias compared to measured S x , likely due to overestimated w and underestimated CCN concentration. The CESM simulated S x exhibits higher values further north over the North Atlantic Ocean, which is attributed to stronger w . The suppression of S x by aerosol is also evident in regions with high CCN concentrations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

A Constrained Data Assimilation Algorithm Based on GSI Hybrid 3D-EnVar and Its Application

Abstract Data assimilation (DA) at mesoscales is important for severe weather forecasts, yet the techniques of data assimilation at this scale remain a challenge. This study introduces dynamical constraints in the Gridpoint Statistical Interpolation (GSI) three-dimensional ensemble variational (3D-EnVar) data assimilation algorithm to enable the use of high-resolution surface observations of precipitation to improve atmospheric analysis at mesoscales. The constraints use the conservations of mass and moisture. Mass constraint suppresses the unphysical high-frequency oscillation, while moisture conservation constrains the atmospheric states to conform with the observed high-resolution precipitation. We show that the constrained data assimilation (CDA) algorithm significantly reduced the spurious residuals of the mass and moisture budgets compared to the original data assimilation (ODA). A case study is presented for a squall line over the Southern Great Plains on 20 May 2011 during Midlatitude Continental Convective Clouds Experiment (MC3E) of the Atmospheric Radiation Measurement (ARM) program by using ODA or CDA analysis as initial condition of forecasts. The state variables, and the location and intensity of the squall line are better simulated in the CDA experiment. Results show how surface observation of precipitation can be used to improve atmospheric analysis through data assimilation by using the dynamical constraints of mass and moisture conservations.

Wang, Jia↗
DOE OSTI2024

Improved Diagnosis of Precipitation Type with LightGBM Machine Learning

Abstract Existing precipitation-type algorithms have difficulty discerning the occurrence of freezing rain and ice pellets. These inherent biases are not only problematic in operational forecasting but also complicate the development of model-based precipitation-type climatologies. To address these issues, this paper introduces a novel light gradient-boosting machine (LightGBM)-based machine learning precipitation-type algorithm that utilizes reanalysis and surface observations. By comparing it with the Bourgouin precipitation-type algorithm as a baseline, we demonstrate that our algorithm improves the critical success index (CSI) for all examined precipitation types. Moreover, when compared with the precipitation-type diagnosis in reanalysis, our algorithm exhibits increased F1 scores for snow, freezing rain, and ice pellets. Subsequently, we utilize the algorithm to compute a freezing-rain climatology over the eastern United States. The resulting climatology pattern aligns well with observations; however, a significant mean bias is observed. We interpret this bias to be influenced by both the algorithm itself and assumptions regarding precipitation processes, which include biases associated with freezing drizzle, precipitation occurrence, and regional synoptic weather patterns. To mitigate the overall bias, we propose increasing the precipitation cutoff from 0.04 to 0.25 mm h −1 , as it better reflects the precision of precipitation observations. This adjustment yields a substantial reduction in the overall bias. Finally, given the strong performance of LightGBM in predicting mixed precipitation episodes, we anticipate that the algorithm can be effectively utilized in operational settings and for diagnosing precipitation types in climate model outputs. Significance Statement Freezing rain can have significant impacts on transportation and infrastructure, making accurate prediction of precipitation types crucial. In this study, we use a machine learning method known as LightGBM to predict precipitation types. We show that the new algorithm performs better than the existing methods for all precipitation types examined. Additionally, we compute a freezing-rain climatology over the eastern United States. Although the resulting climatology pattern corresponds well to observations, the algorithm overpredicts freezing-rain occurrence. We argue that this bias can be substantially reduced by increasing the precipitation cutoff from 0.04 to 0.25 mm h −1 . Overall, this work highlights the potential of the LightGBM algorithm for both weather forecasting and diagnosing precipitation types in climate models.

Meteorology & Atmospheric Sciences↗
DOE OSTI2022

Simultaneous Observations of Surface Layer Profiles of Humidity, Temperature, and Wind Using Scanning Lidar Instruments

We demonstrate the combination of three Doppler lidars (DLs), a water vapor differential absorption lidar and a temperature rotational Raman lidar for the investigation of the interactions between the land-surface and the atmospheric boundary layer. This combination of scanning lidars was operated for the first time during the Land-Atmosphere Feedback Experiment at the Atmospheric Radiation Measurement program's Southern Great Plain site, Oklahoma, USA, in August 2017, and provided simultaneous surface layer profiles of horizontal wind, humidity and temperature. The horizontal wind profiles were determined using the dual-Doppler method with two DLs. The scans were performed above four towers providing atmospheric variables and fluxes. These combined lidar data allowed for the estimation of the friction velocity as well as the surface latent and sensible heat fluxes. For this purpose, profiles calculated with Monin-Obukhov similarity theory were fitted with the Levenberg-Marquardt nonlinear least squares curve-fitting method to the measured surface-layer lidar profiles. We present case studies of three 50-min periods to illustrate the new method. The measurements resulted in friction velocities of 0.31, 0.29, and 0.38 ms –1 , sensible surface heat fluxes of 312.1, 234.1, and 183.3 Wm –2 and latent surface heat fluxes of 251.8, 227.3, and 274.4 Wm –2 . These values were compared with the in-situ measurements of the towers. Considering the sampling differences and the error analyses, the results agree within 25.1%, 42.5%, and 28.8%, respectively, demonstrating that this synergy of scanning active remote sensing systems can be used to derive surface fluxes with reasonable accuracy.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Direct Observations of Surface Fluxes and Air‐Sea Exchange Coefficients in Low Winds Using a Small Uncrewed Aircraft System

In the marine boundary layer, the exchange of momentum, heat, and moisture occurs between the atmosphere and ocean. Since it is too dangerous for a crewed aircraft to fly close to the ocean surface to directly obtain these measurements, a sUAS (small Uncrewed Aircraft System) is one of the only viable options. On 24 March 2023 a Black Swift Technologies S0 sUAS was deployed from the NOAA P-3 on a calm clear day off the west coast of Florida. For 23 min at the end of the mission, the sUAS flew 8 straight line legs with an average length of 2.15 km, at roughly 10 m above the ocean surface, with wind speeds between 3.0 and 4.5 m s −1 . For the first time over the open ocean using a sUAS, the 4-Hz wind and thermodynamic data was used to calculate surface momentum flux, sensible heat flux, and latent flux using both direct covariance methods and the bulk aerodynamic formulas. Since all the flux quantities can be found using both direct and indirect methods, we are able to calculate the exchange coefficients of momentum flux (C D ), latent heat flux (C E ), and sensible heat flux (C H ) with results that are generally in good agreement with previous studies over the same wind speed range. This study demonstrates the ability of sUAS to measure air-sea interactions. Future intention is to use sUAS to obtain similar measurements in high wind events such as hurricanes which could better help understand hurricane intensification and improve model physics.

Deloach, Christopher J. [Embry-Riddle Aeronautical↗
DOE OSTI2023

Surface-based observations of cold-air outbreak clouds during the COMBLE field campaign

Abstract. Cold-air outbreaks (CAOs) are characterized by extreme air–sea energy exchanges and low-level convective clouds over large areas in the high-latitude oceans. As such, CAOs are an important component of the Earth's climate system. The CAOs in the Marine Boundary Layer Experiment (COMBLE) deployment of the US Department of Energy Atmospheric Radiation Measurement (ARM) Mobile Facility (AMF) provided the first comprehensive view of CAOs using a suite of ground-based observations at the northern coast of Norway. Here, cloud and precipitation observations from 13 CAO cases during COMBLE are analyzed. A vertical air motion retrieval technique is applied to the Ka-band ARM Zenith-pointing Radar (KAZR) observations. The CAO cumulus clouds are characterized by strong updrafts with magnitudes between 2–8 m s−1, vertical extents of 1–3 km, and horizontal scales of 0.25–3 km. A strong relationship between our vertical air velocity retrievals and liquid water path (LWP) measurements is found. The LWP measurements exceed 1 kg m−2 in strong updraft areas, and the vertical extent of the updraft correlates well with the LWP values. The CAO cumulus clouds exhibit eddy dissipation rate values between 10−3 and 10−2 m2 s−3 in the lowest 10 km of the atmosphere, and using a radar Doppler spectra technique, evidence of secondary ice production is found during one of the cases.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

AERO-MAP: a data compilation and modeling approach to understand spatial variability in fine- and coarse-mode aerosol composition

Abstract. Aerosol particles are an important part of the Earth climate system, and their concentrations are spatially and temporally heterogeneous, as well as being variable in size and composition. Particles can interact with incoming solar radiation and outgoing longwave radiation, change cloud properties, affect photochemistry, impact surface air quality, change the albedo of snow and ice, and modulate carbon dioxide uptake by the land and ocean. High particulate matter concentrations at the surface represent an important public health hazard. There are substantial data sets describing aerosol particles in the literature or in public health databases, but they have not been compiled for easy use by the climate and air quality modeling community. Here, we present a new compilation of PM2.5 and PM10 surface observations, including measurements of aerosol composition, focusing on the spatial variability across different observational stations. Climate modelers are constantly looking for multiple independent lines of evidence to verify their models, and in situ surface concentration measurements, taken at the level of human settlement, present a valuable source of information about aerosols and their human impacts complementarily to the column averages or integrals often retrieved from satellites. We demonstrate a method for comparing the data sets to outputs from global climate models that are the basis for projections of future climate and large-scale aerosol transport patterns that influence local air quality. Annual trends and seasonal cycles are discussed briefly and are included in the compilation. Overall, most of the planet or even the land fraction does not have sufficient observations of surface concentrations – and, especially, particle composition – to characterize and understand the current distribution of particles. Climate models without ammonium nitrate aerosols omit ∼ 10 % of the globally averaged surface concentration of aerosol particles in both PM2.5 and PM10 size fractions, with up to 50 % of the surface concentrations not being included in some regions. In these regions, climate model aerosol forcing projections are likely to be incorrect as they do not include important trends in short-lived climate forcers.

Mahowald, Natalie M. (ORCID:000000022873997X)↗