Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solid Acid Fuel Cell”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Overview of SOFC Anode Interactions with Coal Gas Impurities

An overview of the results of SOFC anode interactions with phosphorus, arsenic, selenium, sulfur, antimony, and hydrogen chloride as single contaminants or in combinations is discussed. Tests were performed using both anode- and electrolyte-supported cells in synthetic and actual coal gas for periods greater than 1000 hours. Post-test analyses were performed to identify reaction products formed and their distribution, and compared to phases expected from thermochemical modeling. The ultimate purpose of this work is to establish maximum permissible concentrations for impurities in coal gas, to aid in the selection of appropriate coal gas clean-up technologies.

01 COAL, LIGNITE, AND PEAT↗

The electrochemical fluorination of polymeric materials for high energy density aqueous and non-aqueous battery and fuel cell separators

A computerized system was established and the electrochemical fluorination of trichloroethylene, polyacrylic acid and polyvinyl alcohol in anhydrous hydrogen fluoride was attempted. Both solid substrates as well as membranes were used. Some difficulties were found in handling and analyzing the solid substrates and membranes. Further studies are needed in this area. A microprocessor aided electrochemical fluorination system capable of obtaining highly reproducible experimental results was established.

Liu, C. C.↗

Proton conducting membranes for high temperature fuel cells with solid state water free membranes

A water free, proton conducting membrane for use in a fuel cell is fabricated as a highly conducting sheet of converted solid state organic amine salt, such as converted acid salt of triethylenediamine with two quaternized tertiary nitrogen atoms, combined with a nanoparticulate oxide and a stable binder combined with the converted solid state organic amine salt to form a polymeric electrolyte membrane. In one embodiment the membrane is derived from triethylenediamine sulfate, hydrogen phosphate or trifiate, an oxoanion with at least one ionizable hydrogen, organic tertiary amine bisulfate, polymeric quaternized amine bisulfate or phosphate, or polymeric organic compounds with quaternizable nitrogen combined with Nafion to form an intimate network with ionic interactions.

Narayanan, Sekharipuram R.↗

Uncovering fast solid-acid proton conductors based on dynamics of polyanion groups and proton bonding strength

Achieving high proton conductivity in inorganic solids is key for advancing many electrochemical technologies, including low-energy nano-electronics and energy-efficient fuel cells and electrolyzers. A quantitative understanding of the physical traits of a material that regulate proton diffusion is necessary for accelerating the discovery of fast proton conductors. In this work, we have mapped the structural, chemical and dynamic properties of solid acids to the elementary steps of the Grotthuss mechanism of proton diffusion. Our approach combines ab initio molecular dynamics simulations, analysis of phonon spectra and atomic structure calculations. We have identified the donor–hydrogen bond lengths and the acidity of polyanion groups as key descriptors of local proton transfer and the vibrational frequencies of the cation framework as the key descriptor of lattice flexibility. The latter facilitates rotations of polyanion groups and long-range proton migration in solid acid proton conductors. The calculated lattice flexibility also correlates with the experimentally reported superprotonic transition temperatures. Using these descriptors, we have screened the Materials Project database and identified potential solid acid proton conductors with monovalent, divalent and trivalent cations, including Ag + , Sr 2+ , Ba 2+ and Er 3+ cations, which go beyond the traditionally considered monovalent alkali cations (Cs + , Rb + , K + , and NH 4 + ) in solid acids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of potassium salts of 12-tungstophosphoric acid

Potassium salts of 12-tungstophosphoric acid with varying amounts of cation, K{sub x}H{sub 3-x}PW{sub 12}O{sub 40} (x = 1, 2, 3) have been prepared and their characteristics investigated by thermal analyses, FT-IR and micro-Raman spectroscopy and SEM-EDS analysis. It was found that the number of replaced protons by potassium ions in the 12-tungstophosphoric acid structure has influence on the presence of different protonic species, their dynamic equilibrium and on the conductivity of salts. The results reported in this study have been applied to improve the structural model of insoluble acidic salts. It is shown that an acidic potassium salt presents a mixture of neutral salt and unreacted acid. The nature of this mixture depends on the number of replaced protons-oxonium ions by cations. Preliminary measurements with synthesized compounds as solid electrolytes in fuel cells have been done, too.

36 MATERIALS SCIENCE↗

Solid-State Synthesis of Highly Dispersed Nitrogen-Coordinated Single Iron Atom Electrocatalysts for Proton Exchange Membrane Fuel Cells

Fe–N–C with atomically dispersed Fe single atoms is the most promising candidate to replace platinum for the oxygen reduction reaction (ORR) in fuel cells. However, the conventional synthesis procedures require quantities solvents and metal precursors, sluggish adsorption process, and tedious washing, resulting in limited metal doping and uneconomical for large-scale production. Here, for the first time, Fe 2 O 3 is adopted as the Fe precursor to derive abundant single Fe atoms dispersed on carbon surfaces. The Fe–N–C catalyst synthesized by this simple method shows an excellent ORR activity with half-wave potentials of 0.82 and 0.90 V in acidic and alkaline solutions, respectively. A single fuel cell with an optimized Fe–N–C cathode shows a high peak power density of 0.84 W cm –2 . The solid-state transformation synthesis method developed in this study may shed light on mass production of single-atom-based catalysts.

25 ENERGY STORAGE↗

Effects of solvent and chelating agent on synthesis of solid oxide fuel cell perovskite, La{sub 0.8}Sr{sub 0.2}CrO{sub 3-{delta}}

Effects of solvent and chelating agent on synthesis of La{sub 0.8}Sr{sub 0.2}CrO{sub 3-{delta}} perovskite are reported. Samples are synthesized using a solvent (ethylene glycol or 2-methoxyethanol) and a chelating agent (acetylacetone, citric acid or ethylene diamine tetraacetic acid) by polymeric-gel method, and characterized by X-ray diffractometry and Fourier-transform infrared spectroscopy. Citric acid to metal cations molar ratio (Rc) is varied for ethylene glycol-citric acid system. Samples are mainly orthorhombic perovskite. SrCrO{sub 4} is appeared as a secondary phase and found to be the lowest for ethylene glycol-citric acid combination with Rc equal to 7. Crystallographic parameters of perovskite phase are determined and compared with those of LaCrO{sub 3}. A mechanism employing a partial-charge model, chelating effect and solvent-cage effect is proposed to explain the results. Effect of sintering temperature on phase, relative density and morphology of samples prepared using ethylene glycol and citric acid (Rc = 7) is also reported.

36 MATERIALS SCIENCE↗

Reversible Poisoning of the Nickel/Zirconia Solid Oxide Fuel Cell Anodes by Hydrogen Chloride in Coal Gas

The performance of anode-supported solid oxide fuel cells (SOFC) was evaluated in synthetic coal gas containing HCl in the temperature range 650 to 850oC. Exposure to up to 800 ppm HCl resulted in reversible poisoning of the Ni/zirconia anode by chlorine species adsorption, the magnitude of which decreased with increased temperature. Performance losses increased with the concentration of HCl to ~100 ppm, above which losses were insensitive to HCl concentration. Cell voltage had no effect on poisoning. No evidence was found for long-term degradation that can be attributed to HCl exposure. Similarly, no evidence of microstructural changes or formation of new solid phases as a result of HCl exposure was found. From thermodynamic calculations, solid nickel chloride phase formation was shown to be highly unlikely in coal gas. Further, the presence of HCl at even the highest anticipated concentrations in coal gas would minimally increase the volatility of nickel.

01 COAL, LIGNITE, AND PEAT↗

Acidity of surface-infiltrated binary oxides as a sensitive descriptor of oxygen exchange kinetics in mixed conducting oxides

Improving the kinetics of O 2 reduction on oxide surfaces is critical in many energy and fuel conversion technologies. Here we show that the acidity scale for binary oxides is a powerful descriptor for tuning and predicting oxygen surface exchange kinetics on mixed conducting oxides. By infiltrating a selection of binary oxides from strongly basic (Li 2 O) to strongly acidic (SiO 2 ) onto the surface of Pr 0.1 Ce 0.9 O 2-δ samples, it was possible to vary the chemical surface exchange coefficient k chem by 6 orders of magnitude, with basic oxides such as Li 2 O increasing k chem by nearly 1,000 times, with surface concentrations as low as 50 ppm impacting k chem . Strikingly, although the pre-exponential of k chem scales linearly with the acidity of the infiltrated binary oxide, there is nearly no change in the activation energy. Here, the origin of these dramatic changes is proposed to arise from the systematic increase in electron concentration at the Pr 0.1 Ce 0.9 O 2-δ surface with the decreasing acidity of the infiltrated binary oxide.

30 DIRECT ENERGY CONVERSION↗

Improved inorganic ion exchange membranes

New method makes solid ion exchange membrane electrolytes for use in hydrocarbon-oxygen and hydrogen-oxygen fuel cells. The membrane is a sintered composite of zirconia, phosphoric acid, and zeolite.

Arrance, F. C.↗

Space power systems technology

Reported here is a series of studies which examine several potential catalysts and electrodes for some fuel cell systems, some materials for space applications, and mathematical modeling and performance predictions for some solid oxide fuel cells and electrolyzers. The fuel cell systems have a potential for terrestrial applications in addition to solar energy conversion in space applications. Catalysts and electrodes for phosphoric acid fuel cell systems and for polymer electrolyte membrane (PEM) fuel cell and electrolyzer systems were examined.

Coulman, George A.↗

Innovative Non-PGM Catalysts for High-Temperature PEMFCs

The objective of this project was to revolutionize high-temperature proton exchange membrane fuel cell (PEMFC) technology based on polymer membranes imbibed with phosphoric acid through development of stable, high-performance non-precious cathode catalysts. High-temperature PEMFCs operate in a range of 150-220 degrees centigrade, making them ideal candidates for combined heat and power (CHP) applications. Successful catalyst development showed potential to be translated to other solid acid systems such as those based on the Cs2HPO4 (CDP) electrolyte. This incubator effort was however exclusively focused on catalyst development for H3PO4-imbibed PEMFCs.

08 HYDROGEN↗

Visualizing Lignin Coalescence and Migration Through Maize Cell Walls Following Thermochemical Pretreatment

Plant cell walls are composed primarily of cellulose, hemicelluloses, lignins, and pectins. Of these components, lignins exhibit unique chemistry and physiological functions. Although lignins can be used as a product feedstock or as a fuel, lignins are also generally seen as a barrier to efficient enzymatic breakdown of biomass to sugars. Indeed, many pretreatment strategies focus on removing a significant fraction of lignin from biomass to better enable saccharification. In order to better understand the fate of biomass lignins that remain with the solids following dilute acid pretreatment, we undertook a structural investigation to track lignins on and in biomass cell walls. SEM and TEM imaging revealed a range of droplet morphologies that appear on and within cell walls of pretreated biomass; as well as the specific ultrastructural regions that accumulate the droplets. These droplets were shown to contain lignin by FTIR, NMR, antibody labeling, and cytochemical staining. We provide evidence supporting the idea that thermochemical pretreatments reaching temperatures above the range for lignin phase transition cause lignins to coalesce into larger molten bodies that migrate within and out of the cell wall, and can redeposit on the surface of plant cell walls. This decompartmentalization and relocalization of lignins is likely to be at least as important as lignin removal in the quest to improve the digestibility of biomass for sugars and fuels production.

09 BIOMASS FUELS↗

Pechini synthesis and characterization of molybdenum carbide and nickel molybdenum carbide

Carbides, such as {eta}-Ni{sub 6}Mo{sub 6}C, are considered as low-cost substitutes for noble metal catalysts for present applications in hydrodesulfurization and for a possible future sulfur-tolerant fuel cell anode catalyst. Most synthesis methods set the carbon content of the carbides by a carbon-based atmosphere or solid carbon in the synthesis. We show here that {beta}-Mo{sub 2}C and {eta}-Ni{sub 6}Mo{sub 6}C can be synthesized using a Pechini process, simply by heating metal acetates mixed with citric acid and ethylene glycol in one step under H{sub 2} with the only source of carbon being the precursor solution. The {beta}-Mo{sub 2}C forms when heating a Mo-acetate precursor at 850 deg. C. When using Ni- and Mo-acetates, {beta}-Mo{sub 2}C forms at 700 deg. C and lower temperatures, while {eta}-Ni{sub 6}Mo{sub 6}C forms during heating at 800-900 deg. C. The {eta}-Ni{sub 6}Mo{sub 6}C has a surface area of 95.5 m{sup 2} g{sup -1} and less than 10 m{sup 2} g{sup -1} when prepared at 800 and 900 deg. C, respectively. Some Ni{sub 3}C, Ni, and NiC impurities are also present in the nanostructured {eta}-Ni{sub 6}Mo{sub 6}C that was prepared at 900 deg. C. The {eta}-Ni{sub 6}Mo{sub 6}C materials made by the Pechini process are compared with those made from a traditional synthesis, using metal organic precursors at 1000 deg. C under CO/CO{sub 2} mixtures with a carbon activity of 0.011. Our results imply that H{sub 2} and the Pechini process can be used to achieve carbon activities similar to those obtained by methods using gaseous or solid carbon sources. - Graphical abstract: Ball and stick representation of the {eta}-Ni{sub 6}Mo{sub 6}C crystal structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Platinum Group Metal Recycling Technology Development - Final Report

BASF Catalysts LLC, formerly Engelhard Corporation, has completed a project to recover Pt from PEM fuel cell membrane electrode assemblies. The project, which began in 2003, has met the project objective of an environmentally-friendly, cost-effective method for recovery of platinum without release of hydrogen fluoride. This has been achieved using a combination of milling, dispersion and acid leaching. 99% recovery of Pt was achieved, and this high yield can be scaled up using one vessel for a single leach and rinse. Leaching was been successfully achieved using a 10% solids level, double the original target. At this solids content, the reagent and utility costs represent ~0.35% of the Pt value of a lot, using very conservative assumptions. The main cost of the process is capital depreciation, followed by labor.

08 HYDROGEN↗

Anhydrous Proton-Conducting Membranes for Fuel Cells

Polymeric electrolyte membranes that do not depend on water for conduction of protons are undergoing development for use in fuel cells. Prior polymeric electrolyte fuel-cell membranes (e.g., those that contain perfluorosulfonic acid) depend on water and must be limited to operation below a temperature of 125 C because they retain water poorly at higher temperatures. In contrast, the present developmental anhydrous membranes are expected to function well at temperatures up to 200 C. The developmental membranes exploit a hopping-and-reorganization proton- conduction process that can occur in the solid state in organic amine salts and is similar to a proton-conduction process in a liquid. This process was studied during the 1970s, but until now, there has been no report of exploiting organic amine salts for proton conduction in fuel cells.

Narayanan, Sekharipuram↗