SEARCH · Engineering Papers
Results for “Sn”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Utilizing the Multifaceted Benefits of Sn-Microalloying to Design Dilute Al-Zr-Sn Conductor Alloys
Explore the source record for details and available documents.
Measurements at low temperatures and high pressures. ii- superconductivity of sn and in under uniform compression at a pressure of 1750 kg/cm2 <izmereniya pri nizkikh tempera- turakh pri vysokikh davleniyakh. ii- sverkh- provodimost' sn i in pri
Superconductivity of indium and tin under uniform compression
long wavelength Pb(1-x)Sn(X)Se and Pb(1-x)Sn(x)Te diode lasers as local oscillators
A breadboard heterodyne receiver is described which was used to establish the characteristics of lead salt diode lasers pertinent to their use as local oscillators using laser devices operating in the 15-25 micrometer spectral region. Heterodyne detection efficiency is directly correlated with the transverse mode structure and emphasizes the necessity of stable lowest order mode operation for lasers when used as local oscillators. The results obtained indicate that the continued development of these lasers provide suitable local oscillators for a variety of applications.
Long term variability of transmission of thin In-Sn and Sn-C films for EUV instrumentation
The transmission variability is reported for two filters in the EUV, where the filters were supported on an 80% transmission nickel mesh and fabricated by means of a vacuum deposition technique. The first film consisted of 2500 A-thick indium, deposited on 500 A-thick tin, and had its primary bandpass in the 740-960 A range. The second consisted of 1800 A-thick tin and 2000 A-thick carbon, with a bandpass of 500-750 A. At the end of 10 months, the transmission of both filters was measured to check variations. It is demonstrated that the EUV transmission of such filters can change over the typical lifetime of satellite missions, and that such variation depends on the storage environment. The use of vacuum, rather than dry nitrogen storage is recommended.
Direct analysis of the broad-line SN 2019ein: connection with the core-normal SN 2011fe
Explore the source record for details and available documents.
Thirty Years of Radio Observations of Type Ia SN 1972E and SN 1895B: Constraints on Circumstellar Shells
Explore the source record for details and available documents.
SN 2019yvq Does Not Conform to SN Ia Explosion Models
Explore the source record for details and available documents.
Structural characterization of tin in toothpaste by dynamic nuclear polarization enhanced 119 Sn solid-state NMR spectroscopy
Stannous fluoride (SnF 2 ) is an effective fluoride source and antimicrobial agent that is widely used in commercial toothpaste formulations. The antimicrobial activity of SnF 2 is partly attributed to the presence of Sn(II) ions. However, it is challenging to directly determine the Sn speciation and oxidation state within commercially available toothpaste products due to the low weight loading of SnF 2 (0.454 wt% SnF 2 , 0.34 wt% Sn) and the amorphous, semi-solid nature of the toothpaste. Here, we show that dynamic nuclear polarization (DNP) enables 119 Sn solid-state NMR experiments that can probe the Sn speciation within commercially available toothpaste. Solid-state NMR experiments on SnF 2 and SnF 4 show that 19 F isotropic chemical shift and 119 Sn chemical shift anisotropy (CSA) are highly sensitive to the Sn oxidation state. DNP-enhanced 119 Sn magic-angle turning (MAT) 2D NMR spectra of toothpastes resolve Sn(II) and Sn(IV) by their 119 Sn chemical shift tensor parameters. Fits of DNP-enhanced 1D 1 H → 119 Sn solid-state NMR spectra allow the populations of Sn(II) and Sn(IV) within the toothpastes to be estimated. This analysis reveals that three of the four commercially available toothpastes contained at least 80% Sn(II), whereas one of the toothpaste contained a significantly higher amount of Sn(IV).
SN 2021adxl: A luminous nearby interacting supernova in an extremely low-metallicity environment
SN 2021adxl is a slowly evolving, luminous, Type IIn supernova with asymmetric emission line profiles, similar to the well-studied SN 2010jl. We present extensive optical, near-ultraviolet, and near-infrared photometry and spectroscopy covering ∼1.5 years post discovery. SN 2021adxl occurred in an unusual environment, atop a vigorously star-forming region that is offset from its host galaxy core. The appearance of Ly α and O II , as well as the compact core, would classify the host of SN 2021adxl as a “Blueberry” galaxy, analogous to higher redshift, low-metallicity, star-forming dwarf “Green Pea” galaxies. Using several abundance indicators, we find a metallicity of the explosion environment of only ∼0.1 Z ⊙ , the lowest reported metallicity for a Type IIn SN environment. SN 2021adxl reaches a peak magnitude of M r ≈ −20.2 mag and since discovery, SN 2021adxl has faded by only ∼4 magnitudes in the r band with a cumulative radiated energy of ∼1.5 × 10 50 erg over 18 months. SN 2021adxl shows strong signs of interaction with a complex circumstellar medium, seen by the detection of X-rays, revealed by the detection of coronal emission lines, and through multi-component hydrogen and helium profiles. In order to further understand this interaction, we model the H α profile using a Monte Carlo electron scattering code. The blueshifted high-velocity component is consistent with emission from a radially thin spherical shell resulting in the broad emission components due to electron scattering. Using the velocity evolution of this emitting shell, we find that the SN ejecta collide with circumstellar material of at least ∼5 M ⊙ assuming a steady-state mass-loss rate of ∼4 − 6 × 10 −3 M ⊙ yr −1 for the first ∼200 days of evolution. SN 2021adxl was last observed to be slowly declining at ∼0.01 mag d −1 , and if this trend continues, SN 2021adxl will remain observable after its current solar conjunction. Continuing the observations of SN 2021adxl may reveal signatures of dust formation or an infrared excess, similar to that seen for SN 2010jl.
Controlling structural phases of Sn through lattice engineering
Topology and superconductivity, two distinct phenomena, offer unique insight into quantum properties and their applications in quantum technologies, spintronics, and sustainable energy technologies. Tin (Sn) plays a pivotal role here as an element because of its two structural phases, α-Sn exhibiting topological characteristics and β-Sn showing superconductivity. Here, we demonstrate precise control of these phases in Sn thin films using molecular beam epitaxy with systematically varied lattice parameters of the buffer layer. The Sn films exhibit either β-Sn or α-Sn phases as the buffer layer's lattice constant varies from 6.10 Å to 6.48 Å, spanning the range from GaSb (like InAs) to InSb. Further, the crystal structures of α- and β-Sn films are characterized by x-ray diffraction and confirmed by Raman spectroscopy and scanning transmission electron microscopy. Atomic force microscopy validates the smooth, continuous surface morphology. Electrical transport measurements further verify the phases: resistance drop near 3.7 K for β-Sn superconductivity and Shubnikov-de Haas oscillations for α-Sn topological characteristics. Density functional theory shows that α-Sn is stable under tensile strain and β-Sn under compressive strain, aligning well with experimental findings. Hence, this study introduces a platform controlling Sn phases through lattice engineering, enabling innovative applications in quantum technologies and beyond.
How additives for tin halide perovskites influence the Sn 4+ concentration
Tin halide perovskite (Sn-HPs) photovoltaics could potentially equal or exceed the performance of their more toxic Pb-based analogues if defect state densities, particularly originating from the presence of Sn 4+ , can be significantly decreased. Numerous additives are incorporated into Sn-HPs to minimize the amount of Sn 4+ , including SnF 2 , reducing agents such as hydrazine derivatives, and various antioxidants. However, despite the frequent use of additives to reduce Sn 4+ content, there is limited understanding of how they function and consequently limited guidance for the development of new additives. Herein, we use cyclic voltammetry to probe the redox behavior of SnI 2 , SnI 4 , Sn-HP precursor solutions, and 18 different additives. Through 119 Sn NMR measurements we show that hydrochloride containing additives undergo halide exchange with SnI 4 to form SnI x Cl y , which results in decreased Sn 4+ concentrations and less p-type character in the Sn-HP films. We find that the most effective additive at lowering the Sn 4+ content in FASnI 3 is not capable of reducing SnI 4 or forming SnI x Cl y , but rather it acts as a sacrificial and coordinating antioxidant. In general, when selecting additives for Sn-HPs it is important to account for the redox potential, coordination with Sn species, ability to react with oxygen, and the potential for halide exchange.
Optical and Near-Infrared Observations of SN 2013DX Associated with GRB 130702A
We present optical and near-infrared (NIR) light curves and optical spectra of SN 2013dx, associated with the nearby (redshift 0.145) gamma-ray burst GRB 130702A. The prompt isotropic gamma-ray energy released from GRB 130702A is measured to be E(sub gamma, iso) = 6.4(+1.3/-1.0) x 10(exp 50) erg (1 keV to 10 MeV in the rest frame), placing it intermediate between low-luminosity GRBs like GRB 980425/SN 1998bw and the broader cosmological population. We compare the observed g'r'i'z' light curves of SN 2013dx to a SN 1998bw template, finding that SN 2013dx evolves approx. 20% faster (steeper rise time), with a comparable peak luminosity. Spectroscopically, SN 2013dx resembles other broad-lined SNe Ic, both associated with (SN 2006aj and SN 1998bw) and lacking (SN 1997ef, SN 2007I, and SN 2010ah) gamma-ray emission, with photospheric velocities around peak of approx. 21,000 km/s. We construct a quasi-bolometric (g'r'z'yJ) light curve for SN 2013dx, only the fifth GRB-associated SN with extensive NIR coverage and the third with a bolometric light curve extending beyond (Delta)t > 40 days. Together with the measured photospheric velocity, we derive basic explosion parameters using simple analytic models. We infer a Ni-56 mass of M(sub Ni) = 0.37+/- 0.01 Stellar Mass, an ejecta mass of M(sub ej) = 3.1+/- 0.1 Stellar Mass, and a kinetic energy of E(sub K) = (8.2+/- 0.43) x 10(exp 51) erg (statistical uncertainties only), consistent with previous GRB-associated supernovae. When considering the ensemble population of GRB-associated supernovae, we find no correlation between the mass of synthesized Ni-56 and high-energy properties, despite clear predictions from numerical simulations that M(sub Ni) should correlate with the degree of asymmetry. On the other hand, M(sub Ni) clearly correlates with the kinetic energy of the supernova ejecta across a wide range of core-collapse events.
Tiny Sc Allows the Chains to Rattle: Impact of Lu and Y Doping on the Charge-Density Wave in ScV 6 Sn 6
The kagome metals display an intriguing variety of electronic and magnetic phases arising from the connectivity of atoms on a kagome lattice. A growing number of these materials with vanadium–kagome nets host charge–density waves (CDWs) at low temperatures, including ScV 6 Sn 6 , CsV 3 Sb 5 , and V 3 Sb 2 . Curiously, only the Sc version of the RV 6 Sn 6 materials with a HfFe 6 Ge 6 -type structure hosts a CDW (R = Gd–Lu, Y, Sc). In this study, we investigate the role of rare earth size in CDW formation in the RV 6 Sn 6 compounds. Magnetization measurements on our single crystals of (Sc,Lu)V 6 Sn 6 and (Sc,Y)V 6 Sn 6 establish that the CDW is suppressed by substituting Sc by larger Lu or Y. Single-crystal X-ray diffraction reveals that compressible Sn–Sn bonds accommodate the larger rare earth atoms within loosely packed R–Sn–Sn chains without significantly expanding the lattice. We propose that Sc provides extra room in these chains crucial to CDW formation in ScV 6 Sn 6 . Our rattling chain model explains why both physical pressure and substitution by larger rare earth atoms hinder CDW formation despite opposite impacts on lattice size. Here, we emphasize the cooperative effect of pressure and rare earth size by demonstrating that pressure further suppresses the CDW in a Lu-doped ScV 6 Sn 6 crystal. Our model not only addresses why a CDW only forms in the RV 6 Sn 6 materials with tiny Sc but also advances our understanding of why unusual CDWs form in the kagome metals.
Macrosegregation and nucleation in undercooled Pb-Sn alloys
A technique resulting in large undercoolings in bulk samples (23g) of lead-tin alloys was developed. Samples of Pb-12.5 wt percent Sn, Pb-61 wt percent Sn, and Pb-77 wt percent Sn were processed with undercoolings ranging from 4 to 34 K and with cooling rates varying between 0.04 and 4 K/sec. The nucleation behavior of the Pb-Sn system was found to be nonreciprocal. The solid Sn phase effectively nucleated the Pb phase of the eutectic; however, large undercoolings developed in Sn-rich eutectic liquid in the presence of the solid Pb phase. This phenomenon is believed to be mainly the result of differences in interfacial energies between solid Sn-eutectic liquid, and solid Pb-eutectic liquid rather than lattice misfit between Pb and Sn. Large amounts of segregation developed in the highly undercooled eutectic ingots. This macrosegregation was found to increase as undercooling increases. Macrosegregation in these undercooled eutectic alloys was found to be primarily due to a sink/float mechanism and the nucleation behavior of the alloy. Lead-rich dendrites are the primary phase in the undercooled eutectic system. These dendrites grow rapidly into the undercooled bath and soon break apart due to recalescence and Sn enrichment of the liquid. These fragmented Pb dendrites are then free to settle to the bottom portion of the ingot causing the macrosegregation observed in this study. A eutectic Pb-Sn alloy undercooled 20 K and cooled at 4 K/sec had a composition of about Pb-72 wt percent Sn at the top and 55 percent Sn at the bottom.
Macrosegregation and nucleation in undercooled Pb-Sn alloys
A novel technique resulting in large undercoolings in bulk samples (23 g) of lead-tin alloys was developed. Samples of Pb-12.5 wt percent Sn, Pb-61.9 wt.% Sn, and Pb-77 wt.% Sn were processed with undercoolings ranging from 4 to 34 K and with cooling rates varying between 0.04 and 4 K/s. The nucleation behavior of the Pb-Sn system was found to be nonreciprocal. The solid Sn phase effectively nucleated the Pb phase of the eutectic; however, large undercoolings developed in Sn-rich eutectic liquid in the presence of the solid Pb phase. This phenomenon is believed to be mainly the result of differences in interfacial energies between solid Sn-eutectic liquid, and solid Pb-eutectic liquid rather than lattice misfit between Pb and Sn. Large amounts of segregation developed in the highly undercooled eutectic ingots. This macrosegregation was found to increase as undercooling increases. Macrosegregation in these undercooled eutectic alloys was found to be primarily due to a sink/float mechanism and the nucleation behavior of the alloy. Lead-rich dendrites are the primary phase in the undercooled eutectic system. These dendrites grow rapidly into the undercooled bath and soon break apart due to recalescence and Sn enrichment of the liquid. These fragmented Pb dendrites are then free to settle to the bottom portion of the ingot causing the macrosegregation observed in this study. A eutectic Pb-Sn alloy undercooled 20 K and cooled at 4 K/s had a composition of about Pb-72 wt.% Sn at the top and 55% Sn at the bottom.
The Fast Evolution of SN 2010bh Associated with XRF 100316D
The first observational evidence of a connection between supernovae (SNe) and gamma-ray bursts (GRBs) was found about a decade ago. Since then, only half a dozen spectroscopically confirmed associations have been discovered and XRF 1003160 associated with the type-Ic SN 20lObh is among the latest. Aims. We constrain the progenitor radius, the host-galaxy extinction, and the physical parameters of the explosion of XRF l00316D/SN 20lObh at z 0.059. We study the SN brightness and colours in the context of GRB-SNe. Methods. We began observations with the Gamma-Ray burst Optical and Near-infrared Detector (GROND) 12 hours after the GRB trigger and continued until 80 days after the burst. GROND provided excellent photometric data in six filter bands covering a wavelength range from approximately 350 to 1800 nm, significantly expanding the pre-existing data set for this event. Combining GROND and Swift data, the early broad-band spectral energy distribution (SED) is modelled with a blackbody and afterglow component attenuated by dust and gas absorption. The temperature and radius evolution of the thermal component are analysed and combined with earlier measurements available from the literature. Templates of SN 1998bw are fitted to the SN itself to directly compare the lightcurve properties. Finally, a two-component parametrized model is fitted to the quasi-bolometric light curve. which delivers physical parameters of the explosion. Results. The best-fit models to the broad-band SEDs imply moderate reddening along the line of sight through the host galaxy (A(sub v.host = 1.2 +/- 0.1 mag). Furthermore, the parameters of the blackbody component reveal a cooling envelope at an apparent initial radius of 7 x 10(exp 11) cm, which is compatible with a dense wind surrounding a Wolf-Rayet star. A multicolor comparison shows that SN 2010bh is 60 - 70% as bright as SN 1998bw. Reaching maximum brightness at 8 - 9 days after the burst in the blue bands, SN 20lObh proves to be the most rapidly evolving GRB-SNe to date. Modelling of the quasi-bolometric light curve yields M(sub Ni) = 0.21 +/- 0.03 solar M and M(sub ej) = 2.6 +/- 0.2 solar M, typical of values within the GRB-SN population. The kinetic energy is E(sub k) = (2.4 +/- 0.7) x 10(exp 52) erg, which is making this SN the second most energetic GRB-SN after SN 1998bw. Conclusions. This supernova has one of the earliest peaks ever recorded and thereafter fades more rapidly than other GRB-SNe, hypernovae, or typical type-Ic SNe. This could be explained by a thin envelope expanding at very high velocities, which is therefore unable to retain the gamma-rays that would prolong the duration of the SN event.