Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Skip Entry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

42 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1955

A comparative analysis of the performance of long-range hypervelocity vehicles

Long-range hypervelocity vehicles are studied in terms of their motion in powered flight, and their motion and aerodynamic heating in unpowered flight. Powered flight is analyzed for an idealized propulsion system which rather closely approaches present-day rocket motors. Unpowered flight is characterized by a return to earth along a ballistic, skip, or glide trajectory. Only those trajectories are treated which yield the maximum range for a given velocity at the end of powered flight. Aerodynamic heating is treated in a manner similar to that employed previously by the senior authors is studying ballistic missiles (NACA RM A53D28), with the exception that radiant as well as convective heat transfer is considered in connection with glide and skip vehicles. The ballistic vehicle is found to be the least efficient of the several types studied in the sense that it generally requires the highest velocity at the end of powered flight in order to attain a given range. This disadvantage may be offset, however, by reducing convective heat transfer to the re-entry body through the artifice of increasing pressure drag in relation to friction drag - that is, by using a blunt body. Thus the kinetic energy required by the vehicle at the end of powered flight may be reduced by minimizing the mass of coolant material involved.

Eggers, Alfred J , Jr↗
NASA NTRS1971

Concepts and system design of a space emergency re-entry vehicle.

Discussion of the spectrum of remedial concepts and realistic mission constraints. A vehicle design is presented which is offered as the 'best' solution among a number of alternative designs in terms of its cost effectiveness. The probability of the safe reentry and recovery of one to three stranded astronauts is 0.80. The vehicle is symmetrical and lenticular in shape, and exhibits a modest lift-to-drag ratio of 0.5, allowing it to reenter a two-skip trajectory with minimal gravity forces on the astronauts. Attitude control, voice and beacon communication, and impact attenuation are also provided. The vehicle could be delivered in a docked position on the Apollo Applications Program multiple docking adapter.

Huang, C. J.↗
NASA NTRS1989

The controllability of the aeroassist flight experiment atmospheric skip trajectory

The Aeroassist Flight Experiment (AFE) will be the first vehicle to simulate a return from geosynchronous orbit, deplete energy during an aerobraking maneuver, and navigate back out of the atmosphere to a low earth orbit It will gather scientific data necessary for future Aeroasisted Orbitl Transfer Vehicles (AOTV's). Critical to mission success is the ability of the atmospheric guidance to accurately attain a targeted post-aeropass orbital apogee while nulling inclination errors and compensating for dispersions in state, aerodynamic, and atmospheric parameters. In typing to satisfy mission constraints, atmospheric entry-interface (EI) conditions, guidance gains, and trajectory. The results of the investigation are presented; emphasizing the adverse effects of dispersed atmospheres on trajectory controllability.

Wood, R.↗
NASA NTRS2018

Pluto Hop, Skip, and Jump

This is the Final Report from Global Aerospace Corporation on this NIAC effort (Grant Nos.: NNX17AJ71G and 80NSSC18K0062) to develop the Pluto Hop, Skip, and Jump mission concept. We sought out to establish the feasibility of using a large inflatable drag device to decelerate and land on Pluto from interplanetary speed (~14 km/s) using only the Pluto atmosphere and just a few kilograms of propellant. The design and analysis efforts in Phase I indicated that this is feasible. Aerodynamic heating and loads were found to be orders of magnitude less than typical planetary entries due to the ultra-low ballistic coefficient craft and the low density and large scale height of the Pluto atmosphere. The deceleration system is capable of delivering a 200-kg lander-hopper to the surface or inserting an orbiter of a similar mass using aerocapture. Mission analysis work led to a reference mission with Earth launch in 2029, Jupiter assist in 2030, and Pluto arrival in 2040.

Goldman, Benjamin↗
NASA NTRS1962

Aerodynamic Analysis of Tektites and Their Parent Bodies

Experiment and analysis indicate that the button-type australites were derived from glassy spheres which entered or re-entered the atmosphere as cold solid bodies; in case of average-size specimens, the entry direction was nearly horizontal and the entry speed between 6.5 and 11.2 km/sec. Terrestrial origin of such spheres is impossible because of extremely high deceleration rates at low altitudes. The limited extension of the strewn fields rules out extraterrestrial origin of clusters of such spheres because of stability considerations for clusters in space. However, tektites may have been released as liquid droplets from glassy parent bodies ablating in the atmosphere of the earth. The australites then have skipped together with the parent body in order to re-enter as cold spheres. Terrestrial origin of a parent body would require an extremely violent natural event. Ablation analysis shows that fusion of opaque siliceous stone into glass by aerodynamic heating is impossible.

Adams, E. W.↗
NASA NTRS2018

Studies in Support of Venus Aerocapture Utilizing Drag Modulation

Aerocapture has been extensively studied and these studies have shown the benefit for planetary exploration missions. While the traditional approach to aerocapture with lifting configurations and lift-guided modulations have been assessed to be technologically feasible, aerocapture using purely drag modulation was proposed and studied by Prof. Braun and his students. These studies show that if one can assess the feasibility of aerocapture using drag modulation at Venus, and develop tall pole technologies needed at Venus, then this concept is much easier to execute at all other relevant destinations. Based on the above finding, partnered proposals were submitted by Adam Nelessen at JPL and Ethiraj Venkatapathy at Ames in collaboration with Prof. Braun at the University of Colorado, Boulder (UCB). Under this partnership, Ames Research Center (ARC) is working to address some of the key entry technology challenges associated with drag modulation aerocapture at Venus. Drag modulation aerocapture is a simple, scalable, and likely cost-effective way to enhance planetary science missions. The approach envisioned is to design a small spacecraft, that would most likely be a secondary payload, with a removable drag skirt. The vehicle would enter the atmosphere at Venus with a low ballistic coefficient, decelerate rapidly, drop the skirt resulting in a smaller vehicle with a higher ballistic coefficient which would skip out of the atmosphere and enter into a desired orbit. ARC's role in this collaboration is multifold. First of which is to perform design studies on various pre- and post-jettison geometries utilizing a 3-DOF trajectory code to determine the aerodynamics and aerothermodynamics of the vehicles and evaluate viable thermal protection material system designs. Once these design studies are complete, Ames will then perform higher fidelity CFD and TPS sizing to further design the vehicles. Second, the multi-body separation dynamics of the drag modulation event will be explored using both CFD simulations (CART3-D and US3D) as well as possible ballistic range testing. ARC's tools and expertise have been used to assess and advise on the selection of the separating configuration. In addition to the preliminary evaluation, ARC will provide tools and expertise to UCB team members to further assess aerodynamic interactions between the separating bodies and provide guidance as to the feasibility of stable transition.

Beck, Robin↗