Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Simulation Fidelity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Learning the factors controlling mineral dissolution in three-dimensional fracture networks: applications in geologic carbon sequestration

We perform a set of high-fidelity simulations of geochemical reactions within three-dimensional discrete fracture networks (DFN) and use various machine learning techniques to determine the primary factors controlling mineral dissolution. The DFN are partially filled with quartz that gradually dissolves until quasi-steady state conditions are reached. At this point, we measure the quartz remaining in each fracture within the domain as our primary quantity of interest. We observe that a primary sub-network of fractures exists, where the quartz has been fully dissolved out. This reduction in resistance to flow leads to increased flow channelization and reduced solute travel times. However, depending on the DFN topology and the rate of dissolution, we observe substantial variability in the volume of quartz remaining within fractures outside of the primary subnetwork. This variability indicates an interplay between the fracture network structure and geochemical reactions. We characterize the features controlling these processes by developing a machine learning framework to extract their relevant impact. Specifically, we use a combination of high-fidelity simulations with a graph-based approach to study geochemical reactive transport in a complex fracture network to determine the key features that control dissolution. We consider topological, geometric and hydrological features of the fracture network to predict the remaining quartz in quasi-steady state. We found that the dissolution reaction rate constant of quartz and the distance to the primary sub-network in the fracture network are the two most important features controlling the amount of quartz remaining. This study is a first step towards characterizing the parameters that control carbon mineralization using an approach with integrates computational physics and machine learning.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Bayesian batch optimization for molybdenum versus tungsten inertial confinement fusion double shell target design

Access to reliable, clean energy sources is a major concern for national security. Much research is focused on the “grand challenge” of producing energy via controlled fusion reactions in a laboratory setting. For fusion experiments, specifically inertial confinement fusion (ICF), to produce sufficient energy, the fusion reactions in the ICF fuel need to become self-sustaining and burn deuterium-tritium (DT) fuel efficiently. The recent record-breaking NIF ignition shot was able to achieve this goal as well as produce more energy than used to drive the experiment. This achievement brings self-sustaining fusion-based power systems closer than ever before, capable of providing humans with access to secure, renewable energy. In order to further progress toward the actualization of such power systems, more ICF experiments need to be conducted at large laser facilities such as the United States's National Ignition Facility (NIF) or France's Laser Mega-Joule. The high cost per shot and limited number of shots that are possible per year make it prohibitive to perform large numbers of experiments. As such, experimental design relies heavily on complex predictive physics simulations for high-fidelity “preshot” analysis. These multidimensional, multi-physics, high-fidelity simulations have to account for a variety of input parameters as well as modeling the extreme conditions (pressures and densities) present at ignition. Such simulations (especially in 3D) can become computationally prohibitive to turn around for each ICF experiment. In this work, we explore using Bayesian optimization with Gaussian processes (GPs) to find optimal designs for ICF double shell targets, while keeping computational costs to manageable levels. These double shell targets have an inner shell that grades from beryllium on the outer surface to the higher Z material molybdenum, as opposed to the nominally used tungsten, on the inside in order to trade off between the high performance associated with high density inner shells and capsule stability. We describe our results for “capsule-only” xRAGE simulations to study the physics between different capsule designs, inner shell materials, and potential for future experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Kinetic Plasma Simulation Capabilities in the MOOSE Framework: Verification of Particle-Particle Collisions

High-fidelity simulations of complex plasma systems allow researchers to gain key insights into and understanding of these systems. To facilitate massively parallel high-fidelity plasma simulations, finite-element-based particle-in-cell capabilities are being developed within the open-source Multiphysics Object-Oriented Simulation Environment (MOOSE) based framework called Software for Advanced Large-scale Analysis of MAgnetic confinement for Numerical Design, Engineering & Research (SALAMANDER). While SALAMANDER’s primary objective is modeling edge plasmas and plasma-facing components in fusion devices, the particle-in-cell capabilities being developed are general and will support modeling low-temperature plasmas as well. Previously, collisionless magnetostatic simulation capabilities have been verified with the two-stream and Dorey-Guest-Harris instabilities, and single particle motion. Collisions were implemented using the direct simulation Monte Carlo method, and verification of this capability will be presented here several verification problems: relaxation of a randomly initialized gas to a Maxwellian distribution, Fourier heat flow, and comparison of reaction rates to both analytic calculations and those calculated using a multi-term Boltzmann solver.

70 - PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Adaptive Computing and Multi-Fidelity Strategies for Control, Design and Scale-Up of Renewable Energy Applications

We describe our ongoing research in adaptive computing and multi-fidelity modeling strategies. Our goal is to use a combination of low- and high-fidelity simulation models to enable computationally efficient optimization and uncertainty quantification. We develop optimization formulations that take into account the compute resources currently available, which act as a constraint with regards to the fidelity level simulation we can run while maximizing information gain. These strategies are being implemented into a software framework with a generalized API allowing its application to a broad range of applications, from power grid stability and buildings control to material synthesis and biofuels processing. We will discuss a few examples from these applications that can benefit from this approach, especially when considering challenges arising in scaling up experiments and simulations.

adaptive computing↗
DOE OSTI2026

Adaptive Computing and Multi-Fidelity Learning

We describe our ongoing research in adaptive computing. Our goal is to use a combination of low- and high-fidelity simulation models to enable computationally efficient optimization and uncertainty quantification. We develop optimization formulations that take into account the compute resources currently available, which act as a constraint with regards to the fidelity level simulation we can run while maximizing information gain. We will discuss a few application examples that can benefit from this approach, especially when considering challenges arising in scaling up experiments and simulations.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Comparison of volatiles evolving from selected highland and mare lunar regolith simulants during vacuum sintering

Volatiles evolving from JSC-1A, NU-LHT-4M and CSM-LHT-1G lunar regolith simulants during in vacuo thermal processing were analyzed using mass spectrometry as a function of temperature. Two high-fidelity simulants, JSC-1A (mare) and NU-LHT-4M (highland), were compared to a newly developed CSM-LHT-1G highland simulant, modified to closely match lunar geochemistry. Large autogenous gas loads were observed for all investigated materials. Mineralogical knowledge was used to identify and attribute individual volatile species to reacting, transforming, or decomposing constituents (hydrates, carbonates, sulfates, sulfides, clays, etc.) of the respective regolith simulant in the self-generated gas environment. Cumulative mass losses for individual simulant components as a function of temperature were quantified using mass spectrometry in conjunction with thermogravimetric analysis. Investigation of the four components of CSM-LHT-1G – anorthosite, basalt, augite, and glass – aided the attribution of volatile species to specific compounds and their respective sources. The results showed significant decomposition of non-lunar phases present in the man-made regolith simulants below the typical glass crystallization temperatures, which paves the way to devising methods for enhancing the fidelity of the simulants. Finally, high gas loads and corrosive gases (HF and HCl) were recognized as potential hazards, pertaining to the development of large testbed facilities.

42 ENGINEERING↗
DOE OSTI2024

Multiscale and Machine Learning Modeling for Process-informed Microstructure Prediction in Additively Manufactured Materials Using MALAMUTE

Advanced Materials and Manufacturing Technologies (AMMT) program under the Department of Energy Office of Nuclear Energy, aims to develop and qualify additively-manufactured materials for nuclear applications. The key challenges to these efforts are the microstructural variabilities observed on the AM products and their impact on the properties and performance of the material in extreme environments. AMMT is using a combination of high-through-put experimental and modeling techniques to accelerate the qualification efforts. Conventionally, in-situ and ex-situ characterizations and testing are performed to correlate different aspects of the AM process to the final product and its performance. However, adopting a trial-and-error approach to experimentally evaluate the vast range of process parameters required to capture the microstructural variabilities is cost-prohibitive. Modeling and simulation provide a comparatively inexpensive way to understand and correlate the microstructural evolution to the processing conditions. The modeling and simulation work-packages within the AMMT program aims to use physics-based and machine learning modeling capabilities to develop a digital twin for AM that can correlate the process conditions to the final product and establish a process-structure-property-performance (PSPP) correlation for AM materials. The melting and subsequent solidification that occurs during the AM process is a complex phenomenon that requires multiscale multiphysics analysis. Idaho National Laboratory’s (INL) Multiphysics Object-Oriented Simulation Environment (MOOSE), specifically the MOOSE Application Library for Advanced Manufacturing UTilitiEs (MALAMUTE) software, provides an ideal platform for developing the multiphysics multiscale model to explore the intricacies of the microstructural evolution during the AM processes within a single framework. Furthermore, given that such full-fidelity simulations can be computationally intensive, reduced order models are necessary to explore the PSPP space for AM materials in an efficient, reliable, and cost-effective way. This work package focuses on understanding the role of process variabilities on the various microstructural characteristics of the AM materials. Microstructures unique to AM materials, such as compositional micro-heterogeneity and dislocation cells, are of particular interest here since they can influence the creep properties and radiation performance. In fiscal year (FY) 24, we significantly advanced upon our work in the last fiscal year, both on physics-based and ML models. The alloy solidification model available in MOOSE has been extended to incorporate the thermodynamic properties and free energy relevant to 316SS. The model demonstrates the Cr segregation that occurs during solidifcation. It is demonstrated that rate of solidification and solute segregation is primarily influence by the cooling rate dictating the level of freezing. This work captures the microstructural variabilities at the subgrain level that are often missing in the part-scale models. With an aim to connect the microstructural evolution model to realistic process conditions, a reduced order model is developed for predicting the thermal conditions around meltpool from high-fidelity process simulations. Furthermore, machine learning approach is used to accelerate the temperature prediction during the AM process. In the following years, MALAMUTE will be used to connect different aspects of the models and quantitatively predict the microstructural evolution. The developed ML-based surrogate model will consider the process conditions as the input to predict the microstructural features in a cost-effective way. The generated microstructures can be used by other work packages under AMMT to evaluate the properties and environmental response of the material at the mesoscale. Thus, this work help identify the key microstructural features at the subgrain level that are significant in property/performance prediction of the AM products. This work will provide inputs to the large-scale process variability models to reevaluate and validate assumptions/simplifications made in the part-scale models. Furthermore, through active learning this work will help identify the data need from both modeling and experimental sides for development of a robust digital twin for AM.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Transition in ICF Capsule Implosions

Longstanding design and reproducibility challenges in inertial confinement fusion (ICF) capsule implosion experiments involve recognizing the need for appropriately characterized and modeled three-dimensional initial conditions and high-fidelity simulation capabilities to predict transitional flow approaching turbulence, material mixing characteristics, and late-time quantities of interest—e.g., fusion yield. We build on previous coarse graining simulations of the indirect-drive national ignition facility (NIF) cryogenic capsule N170601 experiment-a precursor of N221205 which resulted in net energy gain. We apply effectively combined initialization aspects and multiphysics coupling in conjunction with newly available hydrodynamics simulation methods, including directional unsplit algorithms and low Mach-number correction-key advances enabling high fidelity coarse grained simulations of radiation-hydrodynamics driven transition. Our presentation includes discussion of the capsule initialization and implosion dynamics, analysis of the vorticity production budget, transition signatures, quantities of interest—late-time ion temperature and fusion-neutron yield, numerical uncertainty quantification, and comparisons with NIF data.

42 ENGINEERING↗
DOE OSTI2025

In situ multi-tier auto-ignition detection applied to dual-fuel combustion simulations

Here we use an anomaly detection methodology that is centered on analyzing fourth-order joint moments (co-kurtosis), particularly focusing on its application in auto-ignition of combustion problems with large numbers of species. Unsupervised anomaly detection is challenging to generalize across problem types and domains. A recent technique, centered on analyzing information in the fourth-order joint moment co-kurtosis, has shown promise, especially for high-dimensional scientific data. In this work we present developments to the co-kurtosis based anomaly detection method needed to make it effective and scalable for large-scale distributed scientific data, such as those generated by massively parallel simulations. An in situ co-kurtosis algorithm is employed as the anomaly detection method for identifying ignition kernels in simulations of turbulent combustion. Here, we extend an existing methodology which identifies regions of the domain where anomalies are present, and add another tier of anomaly detection where the individual samples contributing to the anomaly are identified. We apply this algorithm on-the-fly to a variety of turbulent reacting flow problems and compare it to the widely used (but significantly more expensive) chemical explosive mode analysis (CEMA). We demonstrate the ability of the method to detect and identify the onset of low and high temperature ignition which can be used for computational steering, as chemical and combustion anomalies occur intermittently at spatio-temporal locations unknown a priori. Finally, we apply our lightweight in situ algorithm to an exascale high-fidelity simulation with a total of 2.4 Trillion degrees of freedom, performed using an adaptive mesh refinement solver. Furthermore, through a scalability analysis, we show that the relative computational cost of this in-situ anomaly detection algorithm compared to an iteration of the reacting flow solver is negligible.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

High-fidelity forced convection simulations of the University of Wisconsin–Madison air-cooled reactor cavity cooling system

Among the various types of advanced nuclear technologies that exist, high-temperature gas-cooled reactors (HTGRs) stand out for their co-generation capabilities and exceptional passive safety systems. HTGRs rely on a reactor cavity cooling system (RCCS) to remove decay heat from the reactor pressure vessel (RPV) during the course of long-term transients. Several studies have focused on experimental and numerical modeling of the RCCS; however, the literature reveals a notable gap when it comes to high-fidelity simulations such as direct numerical simulations (DNS) or large eddy simulation (LES) models of the RCCS. An LES model was developed for forced convection inside the RCCS so as to obtain a high-fidelity representation of the RCCS at a scale never before attempted. Furthermore, the LES model was compared against three different Reynolds-averaged Navier–Stokes (RANS) models (Realizable k − ϵ, k − ω SST, and Reynolds stress model [RSM]). This comparison verified the robustness and accuracy of the turbulence modeling approach of the RANS models for the RCCS. Finally, based on the comparison between the LES and the RANS models, the k − ω SST RANS model of the experimental facility was developed and compared against the available experimental data.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

A Fast and Accurate Reduced-Order Model for High-Intensity Transferred Arc Discharges

Arc discharges are widely used in welding, plasma smelting, and other industrial processes, where variations in operating conditions strongly affect arc stability, temperature distribution, and energy transfer. Accurate modeling of these phenomena typically requires computationally expensive high-fidelity simulations. This study presents a hierarchy of three arc discharge models with progressively reduced physical fidelity. The high-fidelity model provides a fully physics-resolved reference, the reduced-order model reproduces the dominant thermal and flow characteristics of the arc with reasonable accuracy, and the Elenbaas-Heller model captures key trends in a simplified, rapid formulation. This hierarchy demonstrates that reduced-order model can effectively balance predictive fidelity and computational efficiency, providing practical tools for arc simulation and parametric studies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

One-Dimensional Multi-Velocity Capabilities for Arbitrary Lagrangian-Eulerian Normal Contact Mechanics

Lagrangian and Arbitrary Lagrangian Eulerian (ALE) hydrodynamics codes such as FLAG form the backbone of many mission-critical multi physics simulations at Los Alamos National Laboratory. Critical to pre forming high fidelity simulations with these codes are Lagrangian and ALE contact algorithms, which allow materials to collide, slide, and sep arate throughout a simulation.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Partnership Center for High-Fidelity Boundary Plasma Simulation (Final Report)

Within the Partnership Center for High-Fidelity Boundary Plasma Simulation (HBPS), work at UT-Austin was aimed at improved verification, validation, and uncertainty quantification (VVUQ) for edge plasma simulations and on performing gyrokinetics simulations of pedestal instabilities and turbulence in order to expand foundational understanding of pedestal transport. Regarding VVUQ, the accomplishments can be summarized as follows. First, it was shown that the Moment Preserving Constrained Resampling technique, when applied periodically in particle-in-cell simulations in the XGC code, can dramatically improve the accuracy of the simulation at essentially equivalent computational cost. Second, a technique for estimating model correlations, which are required to solve the model selection and sample allocation problem in multifidelity UQ techniques, without sampling the highest fidelity, most computationally expensive model, was developed and demonstrated. Third, previously developed methods for estimating statistical and discretization errors were applied to numerical methods relevant to edge plasma simulations, namely in particle-in-cell-based approaches, and shown to work. Finally, benchmark studies for comparing gyrokinetic codes were developed and performed, leading to reasonable agreement between four commonly used codes. Regarding physics studies, gyrokinetic simulations to investigate microtearing modes in the DIII-D pedestal were performed using the GENE code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Subject-specific modeling framework for particle deposition using computational fluid dynamics

Quantifying particle deposition and dose in the respiratory tract requires a physiologically realistic representation and reproducible computational workflows. However, existing modeling frameworks, such as the International Commission on Radiological Protection (ICRP) compartmental models and the Multiple Path Particle Dosimetry (MPPD) tool, lack detailed deposition profiles and subject-specific capabilities. The combination of advances in computer vision algorithms applied to the respiratory tract and Computational Fluid and Particle Dynamics (CFPD) allows high-fidelity simulations of particle behavior in anatomically accurate geometries derived from individual CT scans. The segmentation, preprocessing, and file preparation task for a CFPD simulation was often time-consuming, and no prior studies to-date have yet presented a fully automated framework. This work presents a fully automated workflow to obtain individualized particle deposition profiles in the human respiratory tract. The pipeline starts with segmenting upper and lower airway geometries using morphological and deep learning-based methods, generating three-dimensional (3D) models from CT imaging data. Next, a series of algorithms are presented to quality check and prepare the 3D geometry for a CFD or CFPD simulation. The preprocessing step includes correcting geometric artifacts, enforcing a physically consistent mesh, and automatically identifying and capping multiple outlets, which is required for CFD/CFPD simulations. These processed models are then input into open-source (OpenFOAM) or commercial (StarCCM+) CFD solvers, where flow and transient particle transport equations — including turbulence and particle–wall interactions are solved under realistic breathing conditions. Finally, the resulting particle deposition profiles can be integrated with Monte Carlo radiation transport codes and state-of-the-art computational phantoms to assess organ-specific absorbed doses in scenarios of radioactive aerosol inhalation. The presented work streamlines respiratory tract segmentation, preprocessing for CFD/CFPD simulations, and integration with dose assessment workflows, reducing manual intervention and improving access to high-fidelity, subject-specific modeling. The high precision in predicted particle deposition and dose distributions can improve personalized treatment strategies in respiratory medicine and refine dose estimates for radiation protection.

AI↗
DOE OSTI2025

Openpronghorn

OpenPronghorn is a simulation tool specifically tailored for modeling thermal-hydraulic phenomena in advanced nuclear reactors. It is built on the Multiphysics Object-Oriented Simulation Environment (MOOSE), an open-source platform that facilitates the development of high-performance scientific computing applications. OpenPronghorn solves the Navier-Stokes equations, which describe the conservation of mass, momentum, and energy in fluid flows, using the finite volume numerical method. The code supports a wide range of fluid flow conditions that are applicable to nuclear reactors, including incompressible and weakly compressible flows, as well as single-phase and multiphase flows. It is capable of modeling diverse flow regimes, including laminar and turbulent flows, using various turbulence models such as the standard k-epsilon models, the v2f model, and the mixing length model. For multiphase flows, OpenPronghorn employs a mixture a Eulerian modeling approach with mixture, drift-flux, and full Eulerian models, and includes open-sourced interfacial transfer correlations for drag, exchange, and heat transfer coming from the scientific literature. OpenPronghorn's modular design allows it to handle multiscale simulations, ranging from detailed Reynolds-Averaged Navier Stokes (RANS) simulations to coarse-mesh and lumped parameter models. This flexibility enables users to perform high-fidelity simulations of specific reactor components as well as system-level analyses of entire reactor circuits. The code can be coupled with other MOOSE-based tools using the MultiApp system, allowing for the transfer of coupling quantities such as mass flow rates, heat fluxes, and boundary conditions between different simulation scales. One of the main features of OpenPronghorn is the it includes built-in validation cases from the open-source scientific literature and supports the implementation of user-defined models and correlations through MOOSE's FunctorMaterial system. OpenPronghorn is designed to be computationally efficient, leveraging the SIMPLE projection method for large-scale problems, and can be run on high-performance computing systems to handle the extensive computational demands of detailed reactor simulations. Overall, OpenPronghorn is a versatile and robust tool that provides critical insights into the thermal-hydraulic behavior of advanced nuclear reactors, supporting the design, safety, and optimization of next-generation nuclear energy systems.

Retamales, Mauricio Eduardo Tano [Idaho National L↗
DOE OSTI2025

Flexible User-Defined Domain Decomposition in Kilometer-Scale E3SM Land Model Simulation

The Energy Exascale Earth System Model (E3SM) Land Model (ELM) has been extended to kilometer-scale (km-ELM) resolutions, enabling high-fidelity simulations of terrestrial processes at 1 km x 1 km grid spacing. In ELM, domain decomposition partitions the computational domain across processors, ensuring efficient parallel execution. Currently, round-robin decomposition is applied, providing a straightforward way to distribute computational workload. As ELM continues evolving at the kilometer-scale (km-scale), particularly with integrating lateral flow modeling, decomposition strategies must also account for the increased workload and data movement. This paper introduces a flexible user-defined domain decomposition framework, allowing users to customize domain partitioning based on application requirements. The impact of different decomposition strategies is evaluated across various applications concerning computation, communication, and I/O. Results demonstrate that while 1D partitioning yields superior I/O performance, k-nearest neighbors (KNN) clustering effectively reduces inter-process communication overhead. This study lays the groundwork for scalable partitioning in large-scale land surface simulations, enhancing next-generation Earth system modeling.

Wang, Dali [ORNL] (ORCID:0000000168065108)↗
DOE OSTI2024

FENIX: Towards a Fully Integrated Multiphysics Framework for Plasma Facing Component Modeling

Computational tools have a crucial role to play in accelerating the deployment of fusion as a clean, reliable, abundant, and sustainable energy source. Multiphysics, high-fidelity simulation capabilities can help model, study, and predict intricate interactions between materials performance, plasma exposure, neutron irradiation, and engineering processes. As such, they can assist in the resolution of scientific and engineering challenges underpinning design, construction, and commission of fusion power plants. To address these needs, ongoing efforts are leveraging the Multiphysics Object-Oriented Simulation Environment (MOOSE) framework and delivering new computational tools for the fusion community. These tools inherit crucial attributes from MOOSE. They are open-source, modular, integrated with nuclear industry-standard software quality assurance processes, and enable multiphysics, multi-fidelity, fully integrated, zero- to three-dimensional, and massively parallel simulations. After a short overview of these capabilities, we will present the development of Fusion ENergy Integrated multiphys-X (FENIX), a MOOSE-based application designed to enable plasma facing component design and performance evaluation. Throughout their lifetime, plasma facing components are exposed to extreme thermal loads, repeated thermal shocks, and irradiation by plasma ions, neutral particles, and high-energy neutrons. Consequently, designing a plasma facing component with acceptable lifetime degradation is extremely challenging. FENIX aims to model the multiphysics environment in which plasma facing components evolve to accelerate their design studies. To that end, FENIX couples existing MOOSE capabilities such as heat transfer, thermomechanics, and thermal hydraulics, with tritium transport via the MOOSE-based Tritium Migration Analysis Program, Version 8 (TMAP8), with neutronics via the MOOSE-based high-fidelity neutron-photon transport and fluid dynamics code Cardinal, and finally with Particle-in-Cell plasma simulation capabilities being developed in this project. In this study, we present the current FENIX capabilities and preliminary results of its application to model the Tritium Plasma Experiment set up at Idaho National Laboratory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Ultra-low thermal resistance and pressure drop copper and copper-tungsten diamond-shaped pin fin cold plates for liquid cooling of electronics

Modern and future data centers face increasing cooling challenges due to increasing chip thermal design power and die size, along with the need to reduce energy consumption used for cooling. High performance cooling solutions that maintain a low chip junction temperature are needed to ensure electronics reliability. This work develops an ultra-low thermal resistance and low pressure drop 75 mm × 75 mm cold plate, intended for next-generation electronics cooling. The cold plate features an array of diamond-shaped pin fins and integrated copper tungsten heat spreader, selected for its low coefficient of thermal expansion which reduces thermomechanical deformation and allows for closer integration of the cold plate with silicon dies. Starting with 300 candidate designs, three-dimensional computational fluid dynamics simulations predict the thermal-hydraulic performance of cold plate subsections. The highest performing geometries are evaluated with high fidelity simulations. Four cold plates are manufactured for experiments: three with diamond-shaped pin fins and one with straights fins for comparison purposes. The cold plates are fabricated from copper-tungsten (CuW), copper (Cu), or aluminum-silicon-magnesium alloy (AlSi10Mg). The diamond-shaped pin fins achieve a roughly 15 % lower thermal resistance compared to the conventional straight fin microchannel. The highest performing design achieves a chip-to-coolant (including thermal interface material) thermal resistance of 9.0 K/kW in CuW and 6.9 K/kW in Cu under a 1 kW heat load with an inlet-to-outlet pressure drop of 9.0 kPa and water as the working fluid. This work demonstrates ultra-low thermal resistance and pressure drop cold plates for large die, high heat load applications, and shows that CuW is an attractive cold plate material for improved reliability in next generation data center cooling.

Coefficient of thermal expansion↗