Results for “Sesame” — Page 3

NASA NTRS1985

Mesoscale generation of available potential energy in the warm sector of an extratropical cyclone

The generation of available potential energy (APE) was evaluated in the warm sector of an extratropical cyclone containing intense convective activity. Mesoscale rawinsonde data from AVE-SESAME '79 was employed. Parametrization techniques were used for latent and sensible heating components, and variations for the Kuo scheme provided convective latent heat release. Radiative transfer models were used to obtain estimates of infrared and solar processes. The results indicated that solar heating was greater than IR cooling near midday. An extensive low-level cloud deck was the most radiatively active area. Negative generation of APE occurred during most of the period for the SESAME domain as a whole. The leading contributor was convective latent heating located primarily in regions of negative efficiency. Infrared cooling was the only component to consistently produce positive generation. Sensible heating provided an important sink of APE in the low levels during the afternoon.

Fuelberg, H. E.↗

NASA NTRS1985

A summary of research on mesoscale energetics of severe storm environments

The goals of this research were to better understand interactions between areas of intense convection and their surrounding mesoscale environments by using diagnostic budgets of kinetic (KE) and available potential energy (APE). Three cases of intense convection were examined in detail. 1) Atmospheric Variability Experiments (AVE) carried out on 24 to 25 April 1975 were studied. Synoptic scale data at 3 to 6 hour intervals, contained two mesoscale convective complexes (MCCs). Analyses included total KE budgets and budgets of divergent and rotational components of KE. 2) AVE-Severe Environmental Storms and Mesoscale Experiments (SESAME)-4 carried out on 10 to 11 April 1979 were studied. Synotpic and meso alpha-scale data (250 km spacing, 3 hour intervals), contained the Red River Valley tornado outbreak. Analyses included total KE budgets (separate synoptic and mesoscale version), budgets for the divergent and rotational components, and the generation of APE by diabatic processes. 3) AVE-SESAME 5 studies were carried out on 20 to 31 May 1979. Synoptic and meso beta-scale data (75 km spacing, 1 1/2 to 3 hour intervals), contained a small MCC. Analyses include separate KE budgets for the synotic and meso beta-scales and a water vapor budget. Major findings of these investigations are: (1) The synoptic scale storm environment contains energy conversions and transports that are comparable to those of mature midlatitude cyclones. (2) Energetic in the mesoscale storm environment are often an order of magnitude larger than those in an undisturbed region. (3) Mesoscale wind maxima form in the upper troposphere on the poleward sides of convective areas, whereas speeds decrease south of storm regions.

Fuelberg, H. E.↗

NASA NTRS1988

Satellite-observed characteristics of midwest severe thunderstorm anvils

The cloud top and anvil structure of severe thunderstorms observed by the GOES satellite are analyzed for five SESAME cases in 1979 and four non-SESAME cases in 1980-1982. The data is compared with previous models and hypotheses, paying particular attention to the V feature and thermal couplets in the IR observations. The characteristics of the cases are examined and related to the upper-level temperature and wind conditions. It is found that the warm points downwind of the cloud top are due to subsidence. The anaylsis suggests the presence of subsidence due to mountainlike waves. A model in which the close-in warm point is produced by both internal cloud air motions and stratospheric flow around and over the cloud top. It is suggested that the distant warm point is due to either a wave perturbation from air flowing over the cloud top, or air flowing horizonatlly around the elevated portion of the cloud top and anvil.

Heymsfield, Gerald M.↗

NASA NTRSDate not supplied

Solid-state Architecture Batteries for Enhanced Rechargeability and Safety for Electric Aircraft

All electric vertical take-off and landing vehicles (eVTOL) for urban air mobility (UAM) concepts face numerous challenging technical barriers before their introduction into the consumer marketplace. The most challenging of these technical barriers to overcome is developing an energy storage system capable of meeting the rigorous aerospace safety and performance criteria. The performance metrics for eVTOL craft are at least 2 times greater than those of electric automobiles. Furthermore, safety is essential for operation of commercial electric aerovehicles. Preliminary systems level analysis has indicated that there are five key properties which must be optimized for successful implementation of battery systems. Those five key criteria are: safety, energy density, power, packaging design and scalability. Current state-of-the-art (SOA) lithium-ion batteries meet or exceed the requirements for electric aviation in the areas of power and scalability, yet are insufficient in the key performance criteria of energy, safety and packaging design. The SABERS concept proposes a battery that meets all five key performance criteria through development of a solid-state architecture battery utilizing high energy density and power density sulfur-selenium cathode with a lithium metal anode. The combination of sulfur and selenium offers a balanced energy-to-power density ratio, which can be tailored to the specific application by altering the stoichiometric ratios of sulfur to selenium. This cathode will be developed by implementing NASA patented holey graphene technology as a highly conductive, ultra-lightweight electrode scaffold. A solid-state electrolyte will be used as a safe, non-flammable replacement to the highly flammable liquid organic electrolytes currently used in SOA lithium-ion batteries. This solid-state lithium-sulfur-selenium cell will be designed into a serial stacking configuration to enable dense packaging of the battery cells. The serial stacking configuration is termed a bipolar stack, which has the advantages of reducing overall cell weight, reducing the amount of interfaced connections for the cell, and minimizing the cooling requirements for the cell. Lastly, optimization of battery components will occur through a robust and rigorous combination of various computational modeling techniques covering multiple length scales. The expected result will be a fully solid-state battery with operational temperatures from 0 °C to 150 °C which provides the required energy density, discharge rates, and inherent safety to meet the strict aerospace performance criteria. This presentation will show initial results that demonstrate the SABERS Team has developed a composite carbon-sulfur cathode which exceeds 1100 Wh/kg at a discharge rate of 0.4C, and 804 Wh/kg at a discharge rate of 1C. Additionally, this presentation will show the SABERS Team multiscale computational modeling approach and has produced a novel particle dynamics method called Solid Electrolyte Sphere Approximation Model (SESAM). SESAM is on the 1-10 µm scale and provides electromechanical and grain interactions for predictive design guidelines for the experimental team to follow.

Urban Air Mobility (UAM) Vehicles↗

NASA NTRSDate not supplied

Solid-state Architecture Batteries for Enhanced Rechargeability and Safety (SABERS) for Extended Deep Space Applications

Extended duration deep space missions as well as permanent space habitats face numerous technical challenges, key among them is energy generation and energy storage. There are considerable monetary and technical barriers to the generation of power in space. Therefore, it is important to store and be able to access power in an efficient and safe manner over a large number of cycles. Energy storage and in particular, batteries, are vital to the operation of next-generation extraterrestrial shuttles, rovers, habitats and extravehicular activity (EVA) space suits. The performance metrics for extended duration space missions are at least 2 times greater than those set for terrestrial applications such as electric automobiles. Furthermore, safety is essential for operation of space missions particularly involving astronauts such as shuttles, habitats and EVA space suits. Preliminary systems level analysis has indicated that there are five key properties which must be optimized for successful implementation of battery systems. Those five key criteria are: safety, energy density, power, packaging design and scalability. Current state-of-the-art (SOA) lithium-ion batteries can meet or exceed the requirements for certain space applications in the areas of power and scalability, yet are insufficient in the key performance criteria of energy, safety and packaging design. The SABERS concept proposes a battery that meets all five key performance criteria through development of a solid-state architecture battery utilizing high capacity sulfur-selenium cathode and lithium metal anode. The combination of sulfur and selenium offers a balanced energy-to-power density ratio, which can be tailored to the specific application by altering the stoichiometric ratios of sulfur to selenium. This hybrid cathode will be developed by implementing NASA patented holey graphene technology as a highly conductive, ultra-lightweight electrode scaffold. A solid-state electrolyte will be used as a safe, non-flammable replacement to the highly flammable liquid organic electrolytes currently used in SOA lithium-ion batteries. This solid-state lithium-sulfur/selenium cell will be designed into a serial stacking configuration to enable dense packaging of the battery cells. The serial stacking configuration is termed a bipolar stack, which has the advantages of reducing overall cell weight, simplifying the interfaced connections for the cell, and minimizing the cooling requirements for the cell. Lastly, optimization of battery components will occur through a robust and rigorous combination of various computational modeling techniques covering multiple length scales. The expected result will be a fully solid-state battery with operational temperatures up to 150 °C which provides the required energy density, discharge rates, and inherent safety to meet the strict space mission performance criteria. In particular, the wide operational temperature window is required for the large temperature ranges which are experienced across a broad range of potential space missions. This presentation will show initial results that demonstrate the SABERS team has developed a composite carbon-sulfur cathode which exceeds 1100 Wh/kg at a discharge rate of 0.4C, and 804 Wh/kg at a discharge rate of 1C. Additionally, this presentation will show the SABERS team multiscale computational modeling approach and has produced a novel particle dynamics method called Solid Electrolyte Sphere Approximation Model (SESAM). SESAM is on the 1-10 µm scale and provides electromechanical and grain interactions for predictive design guidelines for the experimental team to follow.

Urban Air Mobility (UAM) Vehicles↗

NASA NTRSDate not supplied

Computational Modeling Development of Solid-state Architecture Batteries for Enhanced Rechargeability and Safety for Electric Aircraft

All electric vertical take-off and landing vehicles (eVTOL) for urban air mobility (UAM) concepts face numerous challenging technical barriers before their introduction into the consumer marketplace. The most challenging of these technical barriers to overcome is developing an energy storage system capable of meeting the rigorous aerospace safety and performance criteria. The performance metrics for eVTOL craft are at least 2 times greater than those of electric automobiles. Furthermore, safety is essential for operation of commercial electric aerovehicles. Preliminary systems level analysis has indicated that there are five key properties which must be optimized for successful implementation of battery systems. Those five key criteria are: safety, energy density, power, packaging design and scalability. Current state-of-the-art (SOA) lithium-ion batteries meet or exceed the requirements for electric aviation in the areas of power and scalability, yet are insufficient in the key performance criteria of energy, safety and packaging design. The SABERS concept proposes a battery that meets all five key performance criteria through development of a solid-state architecture battery utilizing high energy density and power density sulfur-selenium cathode with a lithium metal anode. The combination of sulfur and selenium offers a balanced energy-to-power density ratio, which can be tailored to the specific application by altering the stoichiometric ratios of sulfur to selenium. This cathode will be developed by implementing NASA patented holey graphene technology as a highly conductive, ultra-lightweight electrode scaffold. A solid-state electrolyte will be used as a safe, non-flammable replacement to the highly flammable liquid organic electrolytes currently used in SOA lithium-ion batteries. This solid-state lithium-sulfur-selenium cell will be designed into a serial stacking configuration to enable dense packaging of the battery cells. The serial stacking configuration is termed a bipolar stack, which has the advantages of reducing overall cell weight, reducing the amount of interfaced connections for the cell, and minimizing the cooling requirements for the cell. Lastly, optimization of battery components will occur through a robust and rigorous combination of various computational modeling techniques covering multiple length scales. The expected result will be a fully solid-state battery with operational temperatures from 0 °C to 150 °C which provides the required energy density, discharge rates, and inherent safety to meet the strict aerospace performance criteria. This presentation will show initial results that demonstrate the SABERS Team has developed a composite carbon-sulfur cathode which exceeds 1100 Wh/kg at a discharge rate of 0.4C, and 804 Wh/kg at a discharge rate of 1C. Additionally, this presentation will show the SABERS Team multiscale computational modeling approach and has produced a novel particle dynamics method called Solid Electrolyte Sphere Approximation Model (SESAM). SESAM is on the 1-10 µm scale and provides electromechanical and grain interactions for predictive design guidelines for the experimental team to follow.

Urban Air Mobility (UAM) Vehicles↗

NASA NTRSDate not supplied

Computationally Guided Development of Components for High Energy Density Solid-State Lithium-Sulfur Batteries

All electric vertical take-off and landing vehicles (eVTOL) for urban air mobility (UAM) concepts face numerous challenging technical barriers before their introduction into the consumer marketplace. The most challenging of these technical barriers to overcome is developing an energy storage system capable of meeting the rigorous aerospace safety and performance criteria1. The performance metrics for eVTOL craft, such as specific energy, specific power, and safety, exceed those of electric automobiles by a factor of two to four. Current state-of-the-art (SOA) lithium-ion batteries are incapable of meeting the key performance criteria of energy and safety for eVTOL. Therefore, next generation advanced chemistries and designs must be developed to meet required performance metrics for electric aviation2. Beyond lithium-ion chemistries, such as lithium-sulfur, show promise in their high energy, while limitations exist in their power and cyclability due to low electrical conductivity and high intermediate solubility in organic liquid electrolytes. Several strategies to overcome the low electrical conductivity involve the use of selenium as a dopant in the active sulfur material, along with the incorporation of 2-dimensional electron-conducting holey-graphene to improve the composite cathodes electronic conductivity. Furthermore, combining this chemistry with a solid-electrolyte avoids the components’ dissolution issues3. However, the development of composite solid-state cathodes is non-trivial as several components must be intimately mixed so that the active component has sufficient access to both electrons and lithium ions to undergo full electrochemical conversion. Mathematical modeling of battery components can assist experimental design through a robust and rigorous combination of computational modeling techniques covering multiple length scales. The objective is to leverage modern computational materials methods combined with battery multiphysics tools to develop radically advanced compatible cathode and electrolyte materials, build and test solid state lithium-sulfur cells and packs. A NASA-based cross-organizational team of high-powered experts combined integrated computational predictive modeling, fundamental chemistry analysis, advanced material science, and battery cell development to tackle this very challenging, multidisciplinary problem. This presentation will show a multiscale computational modeling approach that has produced a novel particle dynamics method called Solid Electrolyte Sphere Approximation Model (SESAM). SESAM modeling targets the 1-10 µm scale structures and provides electromechanical and grain interactions for predictive design guidelines for the manufacturing of solid-state components. Parameters such as particle size and volume fraction of the constituent materials were modeled and experimentally fabricated to optimize electrochemical performance through improved microstructure design. Experimental feedback was provided through ionic and electronic conductivity assessment and structural analysis of developed materials and cell components.

battery↗

NASA NTRS1980

Pilot-aircraft system response to wind shear

The nonlinear aircraft motion and automatic control computer model of Frost and Reddy has been expanded to incorporate the human pilot into simulations of aircraft response to wind shear. Fixed-stick, autopilot, and manned computer simulations are made with an aircraft having characteristics of a Queen Air (small commuter-type aircraft) flown through longitudinal winds measured by a Doppler radar beamed along the glide slope during the SESAME '79 experiments in Oklahoma. Simulations are also made flying a model Boeing 727 through sinusoidal head wind to tail wind shears at the phugoid frequency to evaluate the response of manned aircraft in thunderstorm wind environments.

Turkel, B. S.↗

NASA NTRS1980

Kinetic energy budgets in areas of intense convection

A kinetic energy budget analysis of the AVE-SESAME 1 period which coincided with the deadly Red River Valley tornado outbreak is presented. Horizontal flux convergence was found to be the major kinetic energy source to the region, while cross contour destruction was the major sink. Kinetic energy transformations were dominated by processes related to strong jet intrusion into the severe storm area. A kinetic energy budget of the AVE 6 period also is presented. The effects of inherent rawinsonde data errors on widely used basic kinematic parameters, including velocity divergence, vorticity advection, and kinematic vertical motion are described. In addition, an error analysis was performed in terms of the kinetic energy budget equation. Results obtained from downward integration of the continuity equation to obtain kinematic values of vertical motion are described. This alternate procedure shows promising results in severe storm situations.

Fuelberg, H. E.↗

NASA NTRS1981

Research study: STS-1 Orbiter Descent

The conversion of STS-1 orbiter descent data from AVE-SESAME contact programs to the REEDA system and the reduction of raw radiosonde data is summarized. A first difference program, contact data program, plot data program, and 30 second data program were developed. Six radiosonde soundings were taken. An example of the outputs of each of the programs is presented.

Hickey, J. S.↗

NASA NTRS1981

AVE-SEASAME 5: 25-mb sounding data

The rewinsonde sounding program for the AVE-SESAME 5 experiment is described and tubulated data at 25 mb intervals are presented for the 23 National Weather Service stations and 20 special stations participating in the experiment. Soundings were taken at 3-hr intervals beginning at 1200 GMT on May 20, 1979, and ending at 1200 GMT on may 21, 1979 (nine sounding times). A tenth sounding was teken at many special stations between 2100 and 0000 GMT on May 20. The method of processing is discussed, estimates of the rms errors in the data are presented, and an example of contact data is given. Reasons are given for the termination of soundings below 100 mb, and soundings with abnormal characteristics are listed.

Sienkiewicz, M. E.↗

NASA NTRS1981

Mesoscale aspects of jet streak coupling and implications for the short term forecasting of severe convective storms

An analysis of a tornado outbreak in Wichita Falls, Texas was analyzed. The coupling of upper and lower tropospheric jet streaks, leading to severe storm outbreaks is illustrated. The high resolution SESAME data sets indicate that mass and momentum adjustments which couple upper and lower tropospheric jets occur within a 3 to 6 hr time frame over a 100 to 500 km domain, and establish the role of isallobaric forcing in the storm development. It is suggested that the output rate of data from the existing 12 hr network be increased to provide better temporal resolution of wind, mass and moisture data.

Uccellini, L. W.↗

NASA NTRS1982

Survey of computer programs for heat transfer analysis

An overview is presented of the current capabilities of thirty-eight computer programs that can be used for solution of heat transfer problems. These programs range from the large, general-purpose codes with a broad spectrum of capabilities, large user community and comprehensive user support (e.g., ANSYS, MARC, MITAS 2 MSC/NASTRAN, SESAM-69/NV-615) to the small, special purpose codes with limited user community such as ANDES, NNTB, SAHARA, SSPTA, TACO, TEPSA AND TRUMP. The capabilities of the programs surveyed are listed in tabular form followed by a summary of the major features of each program. As with any survey of computer programs, the present one has the following limitations: (1) It is useful only in the initial selection of the programs which are most suitable for a particular application. The final selection of the program to be used should, however, be based on a detailed examination of the documentation and the literature about the program; (2) Since computer software continually changes, often at a rapid rate, some means must be found for updating this survey and maintaining some degree of currency.

Noor, A. K.↗

NASA NTRS1982

The evolution of the mesoscale environment of severe local storms Preliminary modeling results

A mesoscale model is employed for predicting two severe weather events observed during thy 1979 SESAME field programs. Particular attention is given to the development and decay of a low-level jet, to the formation of a mesoscale convective complex (MCC) and its modification of lower- and upper-level circulation, to the formation of mesoscale regions of heavy precipitation, the intensification of surface warm and cold fronts, the formation of drylines, dynamic coupling of upper- and low-level jets, the formation of a mountain wave, and the formation and maintenance of capping inversions. A summary of the physics and parameters of a tornado outbreak and a heavy precipitation event are given for a simple bulk-PBL formulation with no heating. A ten-layer model was demonstrated to be sufficient for generating and maintaining distinct vertical gradients of temperature, moisture, and wind across low-level inversions.

Anthes, R. A.↗

NASA NTRS1981

Structure of thunderstorms along a squall line on May 2, 1979

Preliminary results are presented concerning the structure of a developing squall line in Oklahoma on May 2, 1979, during SESAME. It is shown that the line developed ahead of a cold front with explosive growth. A synthesis of radar, satellite, sounding, and surface data is presented. The combined use of satellite and radar data is found to be of considerable value in describing the evolution of cells along the squall line. These are found to interact strongly with one another at all heights. Three preliminary conclusions are made. The first is that many of the cells initially move with the direction of the upper level winds and then turn to the right of all tropospheric winds. An explanation for this rightward turn is given in terms of the motion of the cold front relative to the cells. The second conclusion is that the updrafts in two of the cells at 0030 were quite vertical, and the upper level divergent region is almost directly above the low-level frontal windshift. The third conclusion is that the strongest downdrafts occurred from mid to upper levels and resulted from the strong convergence produced between the divergent outflow regions of two adjacent cells.

Heymsfield, G. M.↗

NASA NTRS1982

Cumulus convection as observed from an airborne infrared radiometer

The implementation of high resolution passive radiative remote sensing of the cloudiness volume in the atmospheric window between 10.5-12.5 microns is described. Airborne radiometers, the NASA/Cloud Top Scanner, were used to obtain radiances during several passages over two merging cumulus clouds, with the data being converted into equivalent blackbody temperatures. Data were also gathered in the 0.55-0.70 micron visible bands as part of the SESAME-79 experiment. The number of points observed in the IR channel were adjusted to account for the viewing angle and areal extents were calculated. A relationship was assumed to exist between the brightness temperatures of the cloud surface and the level of cloudiness at a given atmospheric altitude. Further measurements with lidar scans are indicated in order to reduce the error levels associated with the method.

Szejwach, G.↗

NASA NTRS1983

The influence of convective activity on the vorticity budget

The influence of convective activity on the vorticity budget was determined during the AVE VII and AVE-SESAME I periods. This was accomplished by evaluating each term in the expanded vorticity equation with twisting and tilting and friction representing the residual of all other terms. Convective areas were delineated by use of radar summary charts. The influence of convective activity was established by analyzing contoured fields of each term as well as numerical values and profiles of the various terms in convective and nonconvective areas. Vertical motion was computed by the kinematic method, and all computations were performed over the central United States using a grid spacing of 158 km. The results show that, in convective areas in particular, the residual is of comparable magnitude to the horizontal advection and divergence terms, and therefore, cannot be neglected. In convective areas, the residual term represents a sink of vorticity below 500 mb and a strong source near 300 mb. In nonconvective areas, the residual was small in magnitude at all levels, but tended to be negative (vorticity sink) at 300 mb. The local change term, over convective areas, tended to be balanced by the residual term, and appeared to be a good indicator of development (vorticity becoming more cyclonic). Finally, the shape of the vertical profiles of the term in the budget equation agreed with those found by other investigators for easterly waves, but the terms were one order of magnitude larger than those for easterly waves.

Townsend, T. L.↗

NASA NTRS1984

Initialization of a mesoscale model for April 10, 1979, using alternative data sources

A 35 km grid limited area mesoscale model was initialized with high density SESAME radiosonde data and high density TIROS-N satellite temperature profiles for April 10, 1979. These data sources were used individually and with low level wind fields constructed from surface wind observations. The primary objective was to examine the use of satellite temperature data for initializing a mesoscale model by comparing the forecast results with similar experiments employing radiosonde data. The impact of observed low level winds on the model forecasts was also investigated with experiments varying the method of insertion. All forecasts were compared with each other and with mesoscale observations for precipitation, mass and wind structure. Several forecasts produced convective precipitation systems with characteristics satisfying criteria for a mesoscale convective complex. High density satellite temperature data and balanced winds can be used in a mesoscale model to produce forecasts which verify favorably with observations.

Kalb, M. W.↗