Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Science & Technology - Other Topics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Trends in Small Satellite Presentations from 2017 - 2019

As the small satellite community expands and new technologies emerge, it is important to understand and interpret these changes over time. In doing so, we observe progress and aid future development within the field. During the summer of 2020 we compiled for assessment purposes, archived presentation data for years 2017-2019 from three primary sources: the CubeSat Developers Workshop, Interplanetary Small Satellite Conference, and the Small Satellite Conference. A few examples of the information we recorded and compiled were presenter names and affiliations, presentation topic, and mission progress status. Ultimately, we reviewed roughly 600 presentations between the three conferences and the data obtained therein form the basis of our trend assessment. The paper focuses on trends interpreted through the assessment of key elements available in the content of each presentation to include: SmallSat mission developers, subsystem developments and the expanded scope for small satellite destinations. Data was generalized using various forms of analysis depending on the type of information being assessed. In the end, we achieved our goal of reducing the content to its key points and major takeaways from the conference proceedings. In this presentation, the observed trends in data and our findings will be discussed. First, we will cover changes in presentation topics by categorizing them as either: science, technology, science/technology, or other. Our next topic will be about the agencies and organizations at the forefront of small satellite research and development. The following section will explain trends in subsystem developments for telecommunications, propulsion, power, and thermal management. Further discussion will highlight how the scope of interplanetary spaceflight has expanded since 2017 as new small spacecraft missions venture beyond low-Earth orbit into deep space exploration. And finally, we will observe what information was lacking in archived presentations which included but not limited to: mission’s funding source, presentation focus area, and software used.

Small Satellites↗
DOE OSTI2022

Conversion of Classical Light Emission from a Nanoparticle‐Strained WSe 2 Monolayer into Quantum Light Emission via Electron Beam Irradiation

Abstract Solid‐state single photon emitters (SPEs) within atomically thin transition metal dichalcogenides (TMDs) have recently attracted interest as scalable quantum light sources for quantum photonic technologies. Among TMDs, WSe 2 monolayers (MLs) are promising for the deterministic fabrication and engineering of SPEs using local strain fields. The ability to reliably produce isolatable SPEs in WSe 2 is currently impeded by the presence of numerous spectrally overlapping states that occur at strained locations. Here nanoparticle (NP) arrays with precisely defined positions and sizes are employed to deterministically create strain fields in WSe 2 MLs, thus enabling the systematic investigation and control of SPE formation. Using this platform, electron beam irradiation at NP‐strained locations transforms spectrally overlapped sub‐bandgap emission states into isolatable, anti‐bunched quantum emitters. The dependence of the emission spectra of WSe 2 MLs as a function of strain magnitude and exposure time to electron beam irradiation is quantified and provides insight into the mechanism for SPE production. Excitons selectively funnel through strongly coupled sub‐bandgap states introduced by electron beam irradiation, which suppresses spectrally overlapping emission pathways and leads to measurable anti‐bunched behavior. The findings provide a strategy to generate isolatable SPEs in 2D materials with a well‐defined energy range.

2D material↗
DOE OSTI2024

Sub‐Diffraction Correlation of Quantum Emitters and Local Strain Fields in Strain‐Engineered WSe 2 Monolayers

Strain-engineering in atomically thin metal dichalcogenides is a useful method for realizing single-photon emitters (SPEs) for quantum technologies. Correlating SPE position with local strain topography is challenging due to localization inaccuracies from the diffraction limit. Currently, SPEs are assumed to be positioned at the highest strained location and are typically identified by randomly screening narrow-linewidth emitters, of which only a few are spectrally pure. In this work, hyperspectral quantum emitter localization microscopy is used to locate 33 SPEs in nanoparticle-strained WSe 2 monolayers with sub-diffraction-limit resolution (≈30 nm) and correlate their positions with the underlying strain field via image registration. In this system, spectrally pure emitters are not concentrated at the highest strain location due to spectral contamination; instead, isolable SPEs are distributed away from points of peak strain with an average displacement of 240 nm. These observations point toward a need for a change in the design rules for strain-engineered SPEs and constitute a key step toward realizing next-generation quantum optical architectures.

2D material↗
DOE OSTI2024

Complete separation of benzene-cyclohexene-cyclohexane mixtures via temperature-dependent molecular sieving by a flexible chain-like coordination polymer

Abstract The separation and purification of C6 cyclic hydrocarbons (benzene, cyclohexene, cyclohexane) represent a critically important but energy intensive process. Developing adsorptive separation technique to replace thermally driven distillation processes holds great promise to significantly reduce energy consumption. Here we report a flexible one-dimensional coordination polymer as an efficient adsorbent to discriminate ternary C6 cyclic hydrocarbons via an ideal molecular sieving mechanism. The compound undergoes fully reversible structural transformation associated with removal/re-coordination of water molecules and between activated and hydrocarbon-loaded forms. It exhibits distinct temperature- and adsorbate-dependent adsorption behavior which facilitates the complete separation of benzene, cyclohexene and cyclohexane from their binary and ternary mixtures, with the record-high uptake ratios for C 6 H 6 /C 6 H 12 and C 6 H 10 /C 6 H 12 in vapor phase and highest binary and ternary selectivities in liquid phase. In situ infrared spectroscopic analysis and ab initio calculations provide insight into the host-guest interactions and their effect on the preferential adsorption and structural transformation.

36 MATERIALS SCIENCE↗
NASA NTRSDate not supplied

Common Scientific and Technological Interests Between Astrobiology and Space Biology

The disciplines of astrobiology (AB) and space biology (SB) clearly have common interests, however they have not been pursued jointly. SB and AB are inextricably linked, both intellectually and technologically. They can now be effectively linked operationally. Cross-cutting joint collaborations will enhance innovation and increase cost effectiveness. Session topics include joint science questions, technologies, instrumentation, and missions. Examples include life detection, overlapping planetary protection concerns, biofilms, radiation, hyper- and hypogravity, applications of artificial intelligence and machine learning, interoperable databases, facilities (i.e., spacecraft, lunar surface efforts, simulation chambers, analog sites, etc.), training opportunities, and other topics relevant to AB and SB joint ventures. We welcome contributions on this very broad topical area to facilitate cross-fertilization of these disciplines that are of great importance to NASA.

astrobiology↗
DOE OSTI2020

Spatially Offset Femtosecond Stimulated Raman Spectroscopy: Observing Exciton Transport through a Vibrational Lens

To design better molecular electronic devices, we need a strong understanding of how charges or excitons propagate, as many efficiency losses arise during transport. Exciton transport has been difficult to study because excitons tend to be short-lived, have short diffusion lengths, and can easily recombine. Here, we debut spatially offset femtosecond stimulated Raman spectroscopy (SO-FSRS), a three-pulse ultrafast microscopy technique. By offsetting the photoexcitation beam, we can monitor Raman spectral changes as a function of both time and position. We used SO-FSRS on 6,13-bis(triisopropylsilylethynyl) pentacene, a well-studied organic semiconductor used in photovoltaics and field-effect transistors. Furthermore, we demonstrated that the fast exciton and free charge carrier transport axes are identical and observed that exciton transport is less anisotropic by a factor of ~3. SO-FSRS is the first technique that directly tracks molecular structural evolution during exciton transport, which can provide roadmaps for tailor-making molecules for specific electronic devices.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Selective sulfidation of metal compounds

There is urgent, unprecedented demand for critical by-product and co-product metallic elements for the infrastructure (magnets, batteries, catalysts and electronics) needed to power society with renewable electricity1,2,3. However, the extraction of d-block and f-block metals from mineral and recycled streams is thermodynamically difficult, typically requiring complete dissolution of the materials, followed by liquid–liquid separation using metal-ion complexing or chelating behaviour4,5. The similar electronic structure of these metals results in poor separation factors, necessitating immense energy, water and chemicals consumption6,7,8. Here a metal-processing approach based on selective anion exchange is proposed. Several simple process levers (gas partial pressure, gas flowrate and carbon addition) are demonstrated to selectively sulfidize a target metal from a mixed metal-oxide feed. The physical and chemical differences between the sulfide and oxide compounds (for example, density, magnetic susceptibility and surface chemistry) can then be exploited for vastly improved separation compared with liquid–liquid methods9. The process conditions of sulfidation are provided for 56 elements and demonstrated for 15 of them. An assessment of the environmental and economic impacts suggests a path towards 60–90% reductions in greenhouse gas emissions while offering substantial capital cost savings compared with liquid–liquid hydrometallurgy.

36 MATERIALS SCIENCE↗
DOE OSTI2023

First-Principles Investigation of Electrides Derived from Sodalites

Recently, electride materials, with excess anionic electrons confined in their empty space, have received growing attention due to their promising applications in catalysis, nonlinear optics, and spin electronics. However, the utilization of electride materials is limited by their thermal instability. Here, we introduce an alternative way to achieve the localized anionic electron states via the removal of highly symmetric Wyckoff sites of anions from the existing sodalite compounds. Using four halide sodalites as the parental structures, our simulation reveals that the materials after the removal of anionic halide sites exhibit typical electride behaviors that are characterized by the existence of localized electronic states near the Fermi level. Compared to most previously studied electrides, these materials are expected to be more thermally stable due to the complex structural framework and thus promising for practical applications. Among them, Na 4 (AlSiO 4 ) 3 manifests magnetic electronic structure. We demonstrate that this magnetism originates from a highly localized excess electron state surrounded by electropositive alkaline cations. Here, our results suggest Na 4 (AlSiO 4 ) 3 could be a promising spintronics component, thus encouraging further experimental study.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Electrochemistry at Back-Gated, Ultrathin ZnO Electrodes: Field-Effect Modulation of Heterogeneous Electron Transfer Rate Constants by 30× with Enhanced Gate Capacitance

We report steady-state voltammetry of outer-sphere redox species at back-gated ultrathin ZnO working electrodes in order to determine electron transfer rate constants k ET as a function of independently-controlled gate bias, V G . We demonstrate that k ET can be modulated as much as 30-fold by application of V G ≤ 8 V. Key to this demonstration was integrating the ultrathin (5 nm) ZnO on a high dielectric constant (k) insulator, HfO 2 (30 nm), which was grown on a Pd metal gate. The high-k HfO 2 dramatically decreased the required V G values and increased the gate-induced charge in ZnO compared to previous studies. Importantly, the enhanced gating power of the Pd/HfO 2 /ZnO stack meant it was possible to observe a non-monotonic dependence of k ET on V G , which reflects the inherent density of redox acceptor states in solution. Furthermore, this work adds to the growing body of literature demonstrating that electrochemical kinetics (i.e., rate constants and overpotentials) at ultrathin working electrodes can be tuned by V G , independent of the conventional electrochemical working electrode potential.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Understanding Pore Formation in ALD Alumina Overcoats

AlO X thin films deposited by atomic layer deposition (ALD) have previously been used to increase both stability and selectivity of supported palladium catalysts and are known to develop nanoscale porosity upon heating. Furthermore, understanding the factors that affect ALD thin film porosity would enable future design of layered catalytic structures with tunable nanoscale features on industrially relevant high surface area materials. In this study, porous and nonporous aluminum oxide supports with and without palladium nanoparticles were overcoated with thin films of 2 - 7 nm AlO X by ALD deposited at temperatures of 100 °C, 200 °C and 300 °C. Hydroxyl loss and changes in surface chemistry were observed upon heating the films, and changes in surface area and pore volume of the annealed films were correlated to AlO x deposition temperature and presence of Pd. Crystallization of the overcoat to γ-Al 2 O 3 is shown to occur separately from hydroxyl loss and pore formation. A mechanistic understanding of pore formation in AlO X ALD films is obtained by reference to studies of the structural transformations accompanying the formation of transition aluminas from hydroxide precursors. Additionally, a direct and tunable correlation is established between pore development and the overall hydroxyl content of AlO X ALD coatings.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Architecture of a catalytically active homotrimeric plant cellulose synthase complex

Cellulose is an essential plant cell wall component and represents the most abundant biopolymer on Earth. Supramolecular plant cellulose synthase complexes organize multiple linear glucose polymers into microfibrils as load-bearing wall components. We determined the structure of a poplar cellulose synthase CesA homotrimer that suggests a molecular basis for cellulose microfibril formation. This complex, stabilized by cytosolic plant-conserved regions and helical exchange within the transmembrane segments, forms three channels occupied by nascent cellulose polymers. Secretion steers the polymers toward a common exit point, which could facilitate protofibril formation. CesA’s N-terminal domains assemble into a cytosolic stalk that interacts with a microtubule-tethering protein and may thus be involved in CesA localization. Here, our data suggest how cellulose synthase complexes assemble and provide the molecular basis for plant cell wall engineering.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Strategies for Computer-Aided Discovery of Novel Open-Shell Polymers

Organic π-conjugated polymers with a triplet ground state have been the focus of recent research for their interesting and unique electronic properties, arising from the presence of the two unpaired electrons. These compounds are usually built from alternating electron-donating and electron-accepting monomer pairs which lower the HOMO–LUMO gap and yield a triplet state instead of the typical singlet ground state. In this paper, we use density functional theory calculations to explore the design rules that govern the creation of a ground-state triplet conjugated polymer and find that a small HOMO–LUMO gap in the singlet state is the best predictor for the existence of a triplet ground state, compared to previous use of a pro-quinoidal bonding character. Furthermore, this work can accelerate the discovery of new stable triplet materials by reducing the computational resources needed for electronic-state calculations and the number of potential candidates for synthesis.

36 MATERIALS SCIENCE↗
DOE OSTI2020

3D-Printed Repeating Re-Entrant Topography to Achieve On-Demand Wettability and Separation

While it is difficult and expensive to fabricate a complicated surface structure via conventional techniques, three-dimensional (3D) printing serves as a time-efficient and cost-efficient alternative. In the current study, a novel repeating re-entrant topography is fabricated by two-photon polymerization 3D printing. The experimental results show that the repeating re-entrant surface enhances the desired on-demand surface wettability. Furthermore, the 3D-printed membranes with the repeating re-entrant structures enable the efficient on-demand separation of liquid mixtures with high flux, which is critical for the wastewater treatment in the chemical industry.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Carrier Mobility Modulation in Cu 2 Se Composites Using Coherent Cu 4 TiSe 4 Inclusions Leads to Enhanced Thermoelectric Performance

Carrier transport engineering in bulk semiconductors using inclusion phases often results in the deterioration of carrier mobility (μ) owing to enhanced carrier scattering at phase boundaries. Here, we show by leveraging the temperature-induced structural transition between the α-Cu 2 Se and β-Cu 2 Se polymorphs that the incorporation of Cu 4 TiSe 4 inclusions within the Cu 2 Se matrix results in a gradual large drop in the carrier mobility at temperatures below 400 K (α-Cu 2 Se), whereas the carrier mobility remains unchanged at higher temperatures, where the β-Cu 2 Se polymorph dominates. The sharp discrepancy in the electronic transport within the α-Cu 2 Se and β-Cu 2 Se matrices is associated with the formation of incoherent α-Cu 2 Se/Cu 4 TiSe 4 interfaces, owing to the difference in their atomic structures and lattice parameters, which results in enhanced carrier scattering. In contrast, the similarity of the Se sublattices between β-Cu 2 Se and Cu 4 TiSe 4 gives rise to coherent phase boundaries and good band alignment, which promote carrier transport across the interfaces. Interestingly, the different cation arrangements in Cu 4 TiSe 4 and β-Cu 2 Se contribute to enhanced phonon scattering at the interfaces, which leads to a reduction in the lattice thermal conductivity. The large reduction in the total thermal conductivity while preserving the high power factor of β-Cu 2 Se in the (1–x)Cu 2 Se/(x)Cu 4 TiSe 4 composites results in an improved ZT of 1.2 at 850 K, with an average ZT of 0.84 (500–850 K) for the composite with x = 0.01. Furthermore, this work highlights the importance of structural similarity between the matrix and inclusions when designing thermoelectric materials with improved energy conversion efficiency.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Chemical bond reorganization in intramolecular proton transfer revealed by ultrafast X-ray photoelectron spectroscopy

Time-resolved X-ray photoelectron spectroscopy (TR-XPS) is used in a simulation study to monitor the excited state intramolecular proton transfer between oxygen and nitrogen atoms in 2-(iminomethyl)phenol. Real-time monitoring of the chemical bond breaking and forming processes is obtained through the time evolution of excited-state chemical shifts. By employing individual atomic probes of the proton donor and acceptor atoms, we predict distinct signals with opposite chemical shifts of the donor and acceptor groups during proton transfer. Details of the ultrafast bond breaking and forming dynamics are revealed by extending the classical electron spectroscopy chemical analysis to real time. Through a comparison with simulated time-resolved photoelectron spectroscopy at the valence level, the distinct advantage of TR-XPS is demonstrated thanks to its atom specificity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Substituted ALPO-5 Zeolites as Promising O 2 Sorption Pump Materials: A Density Functional Theory Study

Many chemical processes depend on having an environment that is low in oxygen partial pressure (P O2 < 100 Pa); sorption pumps are a promising route to establishing that environment by either oxygen pumping or oxygen separation from an inert gas. Near ambient sorption-based processes rely on either pressure or thermal swings, requiring no moving parts, no electricity, and neither very high nor very low temperatures. In this work, we use ab initio calculations to explore zeolites as a class of materials for sorption based oxygen pumping/separation. Our calculations indicate that while the neat ALPO-5 zeolite does not adsorb O 2 , O 2 does adsorb on zeolites selectively substituted with transition metals and metalloids and hence, can enable separation and pumping. ALPO-5 substituted with Si, Ge, Sn, Pd, Pt, Ti, V, Cr, Mn, Zr, Mo, Hf, W, Ce, and Pr provides adsorption energies ranging from -0.19 to -3.92 eV, (-) indicates exothermic process. Additionally, we provide a comprehensive understanding of what controls the adsorption energy: 1) the substi-tutions must be able to adopt an oxidation state that is more positive than the cation it replaces, and 2) the size of the pore into which the O 2 adsorbs to the wall. Additionally, we conduct a ther-modynamic analysis of a thermal swing cycle to approximate the optimal O 2 binding energy for 2 low energy O 2 pumping/separation. We find that the minimum energy cost likely occurs when the adsorption energy is in the range of 0.75 – 1.00 eV (72 – 97 kJ·mol -1 ), which corresponds to Ge, V, Pt, or Ce substituted ALPO-5.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Photocarrier Dynamics in MoTe 2 Nanofilms with 2 H and Distorted 1 T Lattice Structures

Molybdenum telluride (MoTe 2 ), an emerging layered two-dimensional (2D) material, possesses excellent phase-changing properties. Previous studies revealed its reversible transition between 2H and 1T' phases with a transition energy as small as 35 meV. Since 1T'-MoTe 2 is metallic, it can serve as an electrical contact for semiconducting 2H-MoTe 2 -based optoelectronic devices. Here, the photocarrier dynamics in MoTe 2 nanofilms synthesized by a one-step method and with coexisting multiple phases are investigated by transient absorption measurements. Both the energy relaxation time and the recombination lifetime of the excitons are shorter in the 1T'-MoTe 2 compared to its 2H phase. Furthermore, these results provide information on the different photocarrier dynamical properties of these two phases, which is important for future 2D optoelectronic and phase-change electronic devices based on MoTe 2 .

36 MATERIALS SCIENCE↗