Hydrokinetic power conversion using Flow Induced Vibrations with nonlinear (adaptive piecewise-linear) springs
Not Available
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
Not provided.
The Atmospheric Radiation Measurement Mobile Facility-2 was installed onboard the research vessel Aurora Australis to measure aerosol properties during the 2017-2018 Measurement of Aerosols, Radiation, and CloUds over the pristine Southern ocean (MARCUS) Experiment, providing unique data on aerosols latitudinal and seasonal variation, including south of 60 degrees S where previous observations are scarce. Data from a Cloud Condensation Nuclei (CCN) counter and Ultra-High-Sensitivity Aerosol Spectrometer show that both the number concentration (N-CCN) and size distribution of CCN-active aerosols, with diameters (D) between 60 nm < D < 1,000 nm are different over the North Southern Ocean (NSO) (50 degrees S-60 degrees S) and the South Southern Ocean (SSO) (62 degrees S-68 degrees S). The average NSO N-CCN at 0.2% and 0.5% supersaturation were 28% and 49% less than that over the SSO. This increase of CCN over the SSO is caused by the increase of aerosols with 60 nm < D < 200 nm, consistent with calculations of Aerosol Scattering Angstrom Exponents derived from a nephelometer. Aerosol hygroscopicity growth factor measured by the Hygroscopic Tandem Differential Mobility Analyzer stayed close to 1.41 for aerosols with 50 nm < D < 250 nm over the SSO, but increased from 1.30 to 1.67 over the NSO, indicating different chemical compositions. Both CCN and Ice Nucleating Particles (INPs) showed a stronger variation with season than with latitude. The variation of heat-labile and presumably proteinacous INPs suggests an increase of ice nucleating-active microbes in summer.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
High-energy lasers (HELs) play an important role in both national defense and scientific research. In defense applications, HELs are used for target detection, tracking, and engagement. In research environments, they support studies of extreme physical conditions relevant to fusion energy and plasma science. These systems depend on the amplification of light through stimulated emission of radiation, allowing optical energy to be increased to the levels required for operation. This amplification occurs when light passes through an energized gain medium that receives energy from an external optical or electrical source. To achieve the desired output, laser systems often use multiple amplification stages, including high-gain preamplifiers and lower-gain power or booster amplifiers. At Lawrence Livermore National Laboratory (LLNL) and other national laboratories, many large-aperture laser amplifier systems are aging and rely on system-specific hardware, obsolete technologies, and incomplete documentation. These legacy systems create challenges for maintenance, supportability, and long-term operation. Their lack of standardization also increases the difficulty of sustaining reliable performance over time. As this infrastructure continues to age, the likelihood of unplanned downtime grows, which can negatively affect both national security missions and scientific research programs that depend on dependable HEL capabilities. The purpose of this document is to demonstrate the application of systems engineering fundamentals and design thinking through the development of a laser amplifier case study. The proposed system concept is intended as an academic exercise and not as a finalized engineering design. As a result, the development presented in this document is incomplete and may contain technical assumptions or errors that would require further investigation before any real-world implementation.
Explore the source record for details and available documents.
An overview of our methods, findings, and takeaways for how we used Earth observations to monitor wildfire smoke and air pollution for enhanced air quality management.
Abstract not provided.
Natural springs have the potential to provide important information on hydrogeochemical processes within aquifers. This study used traditional and classic technical methods and procedures to determine the characteristics and evolution of springs to gain further knowledge on the differences between hot saline springs and cold fresh springs. In a short river segment near Wenquanzhen in the eastern Sichuan Basin, southwest China, several natural springs coexist with total dissolved solids (TDS) ranging from less than 1 to 15 g/L and temperatures from 15 to 40 °C. The springs emanate from the outcropping Lower and Middle Triassic carbonates in the river valley cutting the core of an anticline. The cold springs are of Cl·HCO{sub 3}-Na·Ca and Cl·SO{sub 4}-Na types, and the hot saline springs are mainly of Cl-Na type. The chemistry of the springs has undergone some changes with time. The stable hydrogen and oxygen isotopes indicate that the spring waters are of a meteoric origin. The salinity of the springs originates from dissolution of minerals, including halite, gypsum, calcite and dolomite. The evolution of the springs involves the following mechanisms: the groundwater receives recharge from infiltration of precipitation, then undergoes deep circulation in the core of the anticline (incongruent dissolution of the salt-bearing strata occurs), and emerges in the river valley in the form of hot springs with high TDS. Groundwater also undergoes shallow circulation in the northern and southern flanks of the anticline and appears in the river valley in the form of cold springs with low TDS.
A first end surface of a coiled compression spring at its relaxed length is machined to a plane transverse to the spring axis. The spring is then placed in a press structure having first and second opposed planar support surfaces, with the machined spring end surface bearing against the first support surface, the unmachined spring end surface bearing against a planar first surface of a lateral force compensation member, and an opposite, generally spherically curved surface of the compensation member bearing against the second press structure support surface. The spring is then compressed generally to its loaded length, and a circumferentially spaced series of marks, lying in a plane parallel to the second press structure support surface, are formed on the spring coil on which the second spring end surface lies. The spring is then removed from the press structure, and the second spring end surface is machined to the mark plane. When the spring is subsequently compressed to its loaded length the precisely parallel relationship between the machined spring end surfaces substantially eliminates undesirable lateral deflection of the spring.
A first end surface of a coiled compression spring at its relaxed length is machined to a plane transverse to the spring axis. The spring is then placed in a press structure having first and second opposed planar support surfaces, with the machined spring end surface bearing against the first support surface, the unmachined spring end surface bearing against a planar first surface of a lateral force compensation member, and an opposite, generally spherically curved surface of the compensation member bearing against the second press structure support surface. The spring is then compressed generally to its loaded length, and a circumferentially spaced series of marks, lying in a plane parallel to the second press structure support surface, are formed on the spring coil on which the second spring end surface lies. The spring is then removed from the press structure, and the second spring end surface is machined to the mark plane. When the spring is subsequently compressed to its loaded length the precisely parallel relationship between the machined spring end surfaces substantially eliminates undesirable lateral deflection of the spring.
In a torsion spring the spring action is a result of the relationships between the torque applied in twisting the spring, the angle through which the torsion spring twists, and the modulus of elasticity of the spring material in shear. Torsion springs employed industrially have been strips, rods, or bars, generally termed shafts, capabable of being flexed by twisting their axes. They rely on the variations in shearing forces to furnish an internal restoring torque. In the torsion springs herein the restoring torque is external and therefore independent of the shearing modulus of elasticity of the torsion spring shaft. Also provided herein is a variable stiffness torsion spring. This torsion spring can be so adjusted as to have a given spring constant. Such variable stiffness torsion springs are extremely useful in gimballed payloads such as sensors, telescopes, and electronic devices on such platforms as a space shuttle or a space station.
In a torsion spring the spring action is a result of the relationships between the torque applied in twisting the spring, the angle through which the torsion spring twists, and the modulus of elasticity of the spring material in shear. Torsion springs employed industrially have been strips, rods, or bars, generally termed shafts, capabable of being flexed by twisting their axes. They rely on the variations in shearing forces to furnish an internal restoring torque. In the torsion springs herein the restoring torque is external and therefore independent of the shearing modulus of elasticity of the torsion spring shaft. Also provided herein is a variable stiffness torsion spring. This torsion spring can be so adjusted as to have a given spring constant. Such variable stiffness torsion springs are extremely useful in gimballed payloads such as sensors, telescopes, and electronic devices on such platforms as a space shuttle or a space station.
Shape memory alloys (SMAs) have played an important role in various innovative engineering and medical applications, such as aerospace actuators, vibration damping devices, and coronary stents. In applications, shape memory alloys are commonly utilized in two fundamentally different ways: (i) making use of the superelasticity/ pseudoelasticity (SE/PE) phenomena, as in applications in biomedical engineering, and (ii) taking advantages of the shape memory effect (SME), as is used for actuators. Their ability to act in such vastly different capacities is mainly due to their unique capability to recover large amounts of deformation produced by either applied stresses or temperature changes. One recent emerging application in use of SMAs has been in the area of non-pneumatic tire designs for Martian or Lunar roving vehicles. These vehicles require tires that are capable of traversing rugged terrain while withstanding extreme temperatures and atmospheric conditions. Inspired by the flexible wire mesh tires used on three Lunar Roving Vehicle (LRV) missions to the Moon on Apollo 15, 16, and 17, a new compliant tire technology was developed by the NASA Glenn Research Center (GRC) and Goodyear Tire & Rubber, known as the Spring Tire. The Spring Tire consists of several hundred coiled springs woven into a flexible mesh and formed into the shape of a tire. Like the LRV wire mesh tires, the original Spring Tires were made from spring steel and were prone to permanent deformation when undergoing high localized loads. Later, a new iteration of this technology was invented, known as the ‘Superelastic Tire’. This new technology incorporated the use of superelastic SMA springs, which could effectively undergo approximately 30 times more reversible deformation than the steel spring. It also provided even greater durability and allowed for more flexibility in design, such as the use of other structural forms to reduce mass or increase load carrying capacity. Because of the unique nature of both the SMA material and the complex interactions between the springs, designing Spring Tires for a specific application requires extensive effort. Historically, design decisions have relied on full-scale empirical testing; however, this is very expensive and time consuming, especially when multiple iterations are needed. Therefore, developing a large-scale, robust, and predictive numerical model entailing complex spring interactions and the shape memory material behavior within a tire construct is the first essential step towards a successful design program. The current work focuses on implementation of the user-defined Shape Memory Alloy (SMA) model, otherwise known as SMA-GVIPs, in the Finite Element analysis (FEA) program ABAQUS for large-scale simulations of the GRC-developed Spring Tires made of SMA. The novelty of this work lies in the thorough, detail-oriented, and computationally efficient finite element analysis of full-scale SMA tires. A well-thought material characterization plan followed by model validation and a systemic sensitivity study on SMA tires has never been reported in the previous literature. The main objective of this study is to help the team improve and optimize the structural design of the SMA tires through in-depth numerical analysis and sensitivity studies. Various design variables (wire diameter, coil diameter, pitch, bead angle, and number of springs) were varied to study their influence on the global load-displacement response of the tire construct. A detailed investigation of the three-dimensional stress states was also carried out to enhance our understanding of the local changes as the tire goes through global deformation. It was concluded that a robust numerical model with a good predictive capability, together with a thoughtfully crafted sensitivity study can result in improved design iterations required to reach a desired tire performance while, significantly reducing manufacturing, labor and testing expenses. A summary of the Finite Element (FE) model construction will be presented together with a description of the user-defined SMA model, characterization process, experimental results, model validation, and numerical sensitivity study results.
Web application technologies are growing rapidly with continuous innovation and improvements. This paper focuses on the popular Spring Boot [1] java-based framework for building web and enterprise applications and how it provides the flexibility for service-oriented architecture (SOA). One challenge with any Spring-based applications is its level of complexity with configurations. Spring Boot makes it easy to create and deploy stand-alone, production-grade Spring applications with very little Spring configuration. Example, if we consider Spring Model-View-Controller (MVC) framework [2], we need to configure dispatcher servlet, web jars, a view resolver, and component scan among other things. To solve this, Spring Boot provides several Auto Configuration options to setup the application with any needed dependencies. Another challenge is to identify the framework dependencies and associated library versions required to develop a web application. Spring Boot offers simpler dependency management by using a comprehensive, but flexible, framework and the associated libraries in one single dependency, which provides all the Spring related technology that you need for starter projects as compared to CRUD web applications. This framework provides a range of additional features that are common across many projects such as embedded server, security, metrics, health checks, and externalized configuration. Web applications are generally packaged as war and deployed to a web server, but Spring Boot application can be packaged either as war or jar file, which allows to run the application without the need to install and/or configure on the application server. In this paper, we discuss how Atmospheric Radiation Measurement (ARM) Data Center (ADC) at Oak Ridge National Laboratory, is using Spring Boot to create a SOA based REST [4] service API, that bridges the gap between frontend user interfaces and backend database. Using this REST service API, ARM scientists are now able to submit reports via a user form or a command line interface, which captures the same data quality or other important information about ARM data.