Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SPLICE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

A record of all marker bands found in the upper rivet rows of 2 adjacent bays from a fuselage lap splice joint

A full scale fuselage test article was subjected to 60,000 load cycles (pressurizations) to study the effect of widespread fatigue damage in fuselage structures. Every 10,000 cycles coded marker block loading sequences were used to mark the fracture surfaces of the fatigue cracks propagating within the panel. The loading sequences consisted of series of underloads combined with a series of full pressurizations. The combination of loads and underloads marked the fracture surfaces with marker bands that could later be used to reconstruct the fatigue crack growth history of selected regions within the test article. Thirty rivet holes comprising the upper rivet rows from two adjacent bays (bays #3 and #4) from a fuselage lap splice joint were examined for the purpose of this study. Optical and scanning electron microscopy (SEM) were used to locate the marker bands.

Willard, Scott A.↗
NASA NTRS2018

NASA SPLICE Project: Development and Testing of Precision Landing GN&C Technologies

This presentation shows NASA's progress in developing precision landing and hazard avoidance technologies during the last few years through its ALHAT, COBALT and now SPLICE projects. The talk shows how these projects intend to use active optical sensors to map landing surfaces and identify hazards for future lander missions. The talk will be given at an Entry Descent and Landing session at a NASA Technical Interchange Meeting on active optical sensor systems.

Restrepo, Carolina↗
NASA NTRS2020

SPLICE Safe and Precise Landing - Integrated Capabilities Evolution

The SPLICE project is developing, maturing, demonstrating, and infusing precision landing and hazard avoidance (PL&HA) technologies for NASA and potential commercial spaceflight missions. Near-term development includes high precision and accuracy velocimetry with ranging (via the NDL), high-resolution real-time mapping and hazard detection with ranging (via the HDL), lunar terrain relative navigation (TRN), and the requisite high performance computing capability. These technologies are initially intended to provide PL&HA for the moon, but are extensible to any planetary body. Long-term, the goal is to make these capabilities available to government and commercial entities and to license technology to commercial entities for production.

Pedrotty, Samuel M.↗
NASA NTRSDate not supplied

Sample Processor for Life on Icy Worlds (SPLIce): Monolithic Manifold-Based System to Recover, Prepare, and Deliver Samples and Standards to Instrumentation Suites for Ocean World Life-Search Missions

A claim of life detection on one of the solar system’s icy ocean worlds would necessitate extraordinarily convincing evidence. Limited energy availability in the oceans of such bodies as Europa and Enceladus argues for microbes as most probable among possible life forms, but evidence of their existence in the surface layers of an icy moon or in a frozen plume ejected into space could take various forms, pointing to instrumentation suites as a preferred means to detect diverse molecular and morphological life indicators. Multiple disparate categories of positive detections could provide truly convincing evidence from samples that may be only a few micro-liters. SPLIce’s Foundation. Teams led by NASA’s Ames Research Center have developed and operated numerous small, live-biology and astrobiology science payloads in space over two decades. Since 2016, we have adapted and augmented their biological sample-handling systems to create compact, robust search-for-life fluidic processors designed to function after a decade or more in transit, in environments with very little gravity and lots of radiation: up to 100’s of kilorads.

Instrumentation suite↗
NASA NTRS2024

Safe and Precise Landing Integrated Capabilities Evolution (SPLICE) Imagery of Sensors

Collection of imagery of SPLICE hardware and software visualization. Descent Landing Computer ETU Open Frame Chassis (OFC). ETU pictures of the GSFC Hazard Detection Lidar during assembly. Prototype picture of the delivered Psionic Navigation Doppler Lidar, including testing with a three-dimensional mobile target. Visualization of a lunar lander simulation using the Dual Quaternion Guidance, demonstrating pointing of a mounted hazard lidar, and then diverting to a selected safe site.

Guidance Navigation and Control↗
NASA NTRS1988

A molecular orbital study of a model of the Mg2+ coordination complex of the self splicing reaction of ribosomal RNA

Recent discoveries have established the fact that RNA is capable of acting as an enzyme. In this study two different types of molecular orbital calculations, INDO and ab initio, were used in an attempt to assess the structural/functional role of the Mg2+ hydrated complex in ribozyme reactions. Preliminary studies indicate that the reaction is multistep and that the Mg2+ complex exerts a stabilizing effect on the intermediate or midpoint of the reaction.

Non-NASA Center↗
NASA NTRS2019

PL&HA and SPLICE Overview

Guidance, Navigation and Control (GN&C) technologies for precise and safe landing are essential for future robotic science and human exploration missions to solar system destinations with targeted surface locations that pose a significant risk to successful landing and subsequent mission operations. These Entry, Descent and Landing (EDL) technologies are a part of the NASA domain called PL&HA (Precision Landing and Hazard Avoidance) and are considered high priority capabilities within the space technology roadmaps from NASA and the National Research Council (NRC). The PL&HA technologies promote and enable new missions concepts to solar system destinations.

Precision Landing and Hazard Avoidance (PL&HA)↗
NASA NTRS1980

Cable-splice detector

Detector has possible uses in aerial cable-car systems, equipment handling in mines, boreholes, and undersea operations, and other applications where moving steel cable must be measured, monitored, or controlled. Detector consists of Hall-effect magnetic sensor located close to cable. Magnetic markings on cable are converted to electrical signals. Signals are filtered, amplified, and can actuate alarm.

Lee, R. D.↗
NASA NTRS1986

Strength of graphite/epoxy bolted wing-skin splice specimens subjected to outdoor exposure under constant load and yearly fatigue loading

The results of an experimental study to provide long-term durability data on detailed full-scale graphite/epoxy wing-skin joint designs under environmental exposure and cyclic loading associated with commercial transport aircraft are reported. The specimens consisted of a single-row bolt configuration fabricated from T300/5208 and a double-row bolt configuration fabricated from T300/5209. The unpainted specimens were exposed to the outdoor environment under a sustained tensile load, and at yearly intervals, they were subjected to fatigue loading. Experimental results showed a slight reduction in residual tensile strength for both graphite/epoxy joints under the exposure times and fatigue loadings reported. A 7.5-percent decrease in residual strength was observed for the T300/5208 single-row joint after 5 years exposure and two lifetimes of fatigue loading. A 5.3-percent decrease in residual strength was observed for the T300/5209 double-row joint after 7 years exposure and 2.8 lifetimes of fatigue loading. The 5208 epoxy material was more susceptible to degradation by ultraviolet radiation than the 5209 epoxy material.

Wichorek, G. R.↗
NASA NTRS1992

Metal-To-Composite Shaft Splice

Strong, lightweight shaft formed without awkward bolted flanges. Composite and metal portions of shaft joined by winding composite portion onto outer surface and into spiral groove of metal portion. Groove and composite material constitute structural bond. If opposing spiral grooves used, then two shafts locked together against torques in both directions.

Kish, Jules↗
NASA NTRS1993

Modeling study on the cleavage step of the self-splicing reaction in group I introns

A three-dimensional model of the Tetrahymena thermophila group I intron is used to further explore the catalytic mechanism of the transphosphorylation reaction of the cleavage step. Based on the coordinates of the catalytic core model proposed by Michel and Westhof (Michel, F., Westhof, E. J. Mol. Biol. 216, 585-610 (1990)), we first converted their ligation step model into a model of the cleavage step by the substitution of several bases and the removal of helix P9. Next, an attempt to place a trigonal bipyramidal transition state model in the active site revealed that this modified model for the cleavage step could not accommodate the transition state due to insufficient space. A lowering of P1 helix relative to surrounding helices provided the additional space required. Simultaneously, it provided a better starting geometry to model the molecular contacts proposed by Pyle et al. (Pyle, A. M., Murphy, F. L., Cech, T. R. Nature 358, 123-128. (1992)), based on mutational studies involving the J8/7 segment. Two hydrated Mg2+ complexes were placed in the active site of the ribozyme model, using the crystal structure of the functionally similar Klenow fragment (Beese, L.S., Steitz, T.A. EMBO J. 10, 25-33 (1991)) as a guide. The presence of two metal ions in the active site of the intron differs from previous models, which incorporate one metal ion in the catalytic site to fulfill the postulated roles of Mg2+ in catalysis. The reaction profile is simulated based on a trigonal bipyramidal transition state, and the role of the hydrated Mg2+ complexes in catalysis is further explored using molecular orbital calculations.

NASA Discipline Exobiology↗
NASA NTRS2017

The Profile Envision and Splicing Tool (PRESTO): Developing an Atmospheric Wind Analysis Tool for Space Launch Vehicles Using Python

Launch vehicle programs require vertically complete atmospheric profiles. Many systems at the ER to make the necessary measurements, but all have different EVR, vertical coverage, and temporal coverage. MSFC Natural Environments Branch developed a tool to create a vertically complete profile from multiple inputs using Python. Forward work: Finish Formal Testing Acceptance Testing, End-to-End Testing. Formal Release

Orcutt, John M.↗
NASA NTRSDate not supplied

NASA and Blue Origin Collaborative Assessment of Precision Landing Algorithms and Computing

NASA’s Safe and Precise Landing Integrated Capabilities Evolution (SPLICE) project is developing sensor, algorithm, and compute technologies for precision landing and hazard avoidance. These technologies are being tested as an integrated Precision Landing and Hazard Avoidance (PL&HA) system on Blue Origin’s New Shephard suborbital vehicle. A key goal for the computing element of this technology development is to characterize the performance of the SPLICE software workloads on the project’s Descent and Landing Computer (DLC). The DLC is a multi-core processor designed as a surrogate for NASA’s High-Performance Space Computer (HPSC). Measurements of the SPLICE workload performance on the DLC provides NASA insight on how PL&HA capabilities will perform on the HPSC, and guidance on how the SPLICE algorithms can be implemented to best utilize the DLC platform. This insight can also be used to derive requirements to guide trade studies on candidate computing architectures, for use on platforms like Blue Moon. NASA and Blue Origin are collaborating under an agreement to pursue this mutual benefit. Performance metrics collected are based on measurement of common compute resources such as percentage used of memory bandwidth, I/O utilization, interrupt latency, and kernel vs. user space code residency. Where possible existing performance counters and metrics that are part of the operating system kernel are used. As the design has a significant FPGA component, performance counters are identified and instantiated in the fabric to measure DMA performance and interface metrics. Collection of metrics is performed on the DLC with a representative workload that simulates a full landing cycle of the Blue Origin New Shepard vehicle. Consideration is given to the other compute implementations and whether they can run SPLICE algorithms at the same rate and with the same latency as the DLC. One option being considered is the use of a RISC-V soft core instantiated in a radiation resilient FPGA fabric such as the Xilinx KU60. Select algorithms from the SPLICE code will be run for comparison with the DLC. This paper describes how the DLC is instrumented to collect performance measurements of the SPLICE workloads, preliminary results from these measurements, and their implications on SPLICE algorithm implementation. The results of experimentation to derive candidate requirements for architecture trades on a PL&HA computing system are also presented.

computer performance↗
NASA NTRS1979

New Life For The Cable Cars

NASA-Arnes' major recommendations involved ways of extending cable life in the interests of safety and economy. Other recommendations included redesign of the cablegripping device, substitution of modern braking mechanisms, improvements in cable pulleys and other components, and new inspection and repair procedures. Ames followed up by designing and installing new equipment to lengthen cable life, which averages only about two months. These cables-four of them for four different car routes--are endless belts, like ski lift cables, running from the downtown car barn to the end of each line. When a cable is installed, the loop is closed by splicing the ends together in a 72-footlong splice. The splice is the weakest part of the cable and a source of problems. When the car operator applies his grip while over a splice, the resulting friction sometimes causes the splice to "unbraid" and fail; this means shutting down the line until the splice can be repaired. Even when unbraiding does not occur, gripping a splice shortens cable life by friction wear. Worn cables are a safety hazard and must be replaced, which is expensive at $1.60 a foot for 10,000 to 20,000 feet of cable.

Source record↗