Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SPIN STABILIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Dynamics of spin stabilized spacecraft during deployment of telescoping appendages

The dynamics of a spin stabilized spacecraft with telescoping appendages are treated both analytically and numerically. Two types of telescoping appendages are considered: (a) where an end mass is mounted at the end of an (assumed) massless boom; and (b) where the appendage is assumed to consist of a uniformly distributed homogeneous mass throughout its length. For the telescoping system Eulerian equations of motion are developed. During all deployment sequences it is assumed that the transverse component of angular momentum is much smaller than the component along the major spin axis. Closed form analytical solutions for the time response of the transverse components of angular velocities are obtained when the spacecraft hub has a nearly spherical mass distribution. For the more general case, a series solution is obtained and this solution is limited by its radius of convergence. The comparison of the different approximate analytical methods with numerical integration results are studied and it is observed that the oscillatory nature of the responses of the transverse angular velocity components reduces rapidly with faster extension rates.

Sellappan, R.↗
NASA NTRS2008

SAMPEX Spin Stabilized Mode

The Solar, Anomalous, and Magnetospheric Particle Explorer (SAMPEX), the first of the Small Explorer series of spacecraft, was launched on July 3, 1992 into an 82' inclination orbit with an apogee of 670 km and a perigee of 520 km and a mission lifetime goal of 3 years. After more than 15 years of continuous operation, the reaction wheel began to fail on August 18,2007. With a set of three magnetic torquer bars being the only remaining attitude actuator, the SAMPEX recovery team decided to deviate from its original attitude control system design and put the spacecraft into a spin stabilized mode. The necessary operations had not been used for many years, which posed a challenge. However, on September 25, 2007, the spacecraft was successfully spun up to 1.0 rpm about its pitch axis, which points at the sun. This paper describes the diagnosis of the anomaly, the analysis of flight data, the simulation of the spacecraft dynamics, and the procedures used to recover the spacecraft to spin stabilized mode.

Tsai, Dean C.↗
NASA NTRS1985

Mass property control of a spin stabilized spacecraft with restrictive mission and weight constraints

In the primary experiment of the spin stabilized San Marco D/L spacecraft, the drag effects on a light spherical shell coupled to a relatively massive center body will be measured. To achieve the precise mass property control, the centroids of both the shell and the center body must coincide with each other and with the center of pressure of the shell. Precise spin balancing is needed for launch and orbital stability, and the deployable antennas need accurate alignment. Corrective measures, developed after the preliminary mass measurements showed flaws in the mass property control, are described in detail. Inertia booms and a yo-yo despin system were developed as add-on units, spin balance measurements about all three geometric axes were used to define weight minimized correction within the outer shell envelope, and boom tip mass differentials were optimized for the most favorable inertia ratio margin achievable within the mission weight constraints. The weight versus orbital lifetime trade-offs were also considered.

Lang, W. E.↗
NASA NTRS2008

Spin-Stabilized Microsatellites with Solar Concentrators

A document proposes the development of spin-stabilized microsatellites powered by solar photovoltaic cells aided by solar concentrators. Each such satellite would have a cylindrical or other axisymmetric main body with solar cells mounted in a circumferential belt-like array on its exterior surface. The solar concentrator would be a halo-like outrigger cylindrical Fresnel lens array that would be deployed from and would surround the main body, connected to the main body via spokes or similar structural members. The spacecraft would be oriented with its axis of symmetry perpendicular to the line of sight to the Sun and would be set into rotation about this axis. In effect, the solar cells and concentrator would be oriented and rotated in a "rotisserie" mode, making it possible to take advantage of the concentration of solar light while preventing localized overheating of the solar cells. In addition, the mechanical stabilization inherently afforded by the rotation could be exploited as a means of passive attitude control or, at least, of reducing the requirement for active attitude control.

Timmerman, Paul↗
NASA NTRS1975

Four methods of attitude determination for spin-stabilized spacecraft with applications and comparative results

The attitude of a spacecraft is determined by specifying independent parameters which relate the spacecraft axes to an inertial coordinate system. Sensors which measure angles between spin axis and other vectors directed to objects or fields external to the spacecraft are discussed. For the spin-stabilized spacecraft considered, the spin axis is constant over at least an orbit, but separate solutions based on sensor angle measurements are different due to propagation of errors. Sensor-angle solution methods are described which minimize the propagated errors by making use of least squares techniques over many sensor angle measurements and by solving explicitly (in closed form) for the spin axis coordinates. These methods are compared with star observation solutions to determine if satisfactory accuracy is obtained by each method.

Smith, G. A.↗
NASA NTRS2004

Improved Nutation Damper for a Spin-Stabilized Spacecraft

A document proposes an improved liquid- ring nutation damper for a spin-stabilized spacecraft. The improvement addresses the problem of accommodating thermal expansion of the damping liquid. Heretofore, the problem has been solved by either (1) filling the ring completely with liquid and accommodating expansion by attaching a bellows or (2) partially filling the ring and accepting the formation of bubbles. The disadvantage of (1) is that a bellows is expensive and may not be reliable; the disadvantage of (2) is that bubbles can cause fluid lockup and consequent loss of damping. In the improved damper, the ring would be nearly completely filled with liquid, and expansion would be accommodated, but not by a bellows. Instead, an escape tube would be attached to the ring. The escape tube would be positioned and oriented so that the artificial gravitation and the associated buoyant force generated by the spin of the spacecraft would cause the bubbles to migrate toward the tip of the tube. In addition, when the spacecraft was on the launch pad, the escape tube would be at the top of the ring, so that bubbles would rise into the tube.

Woodard, Mark A.↗
NASA NTRS2015

Generalized Momentum Control of the Spin-Stabilized Magnetospheric Multiscale Formation

The Magnetospheric Multiscale (MMS) mission consists of four identically instrumented, spin-stabilized observatories elliptically orbiting the Earth in a tetrahedron formation. The on-board attitude control system adjusts the angular momentum of the system using a generalized thruster-actuated control system that simultaneously manages precession, nutation and spin. Originally developed using Lyapunov control-theory with rate-feedback, a published algorithm has been augmented to provide a balanced attitude/rate response using a single weighting parameter. This approach overcomes an orientation sign-ambiguity in the existing formulation, and also allows for a smoothly tuned-response applicable to both a compact/agile spacecraft, as well as one with large articulating appendages.

Maneuver and Attitude Dynamics↗
NASA NTRS2015

A Kalman Filter for Mass Property and Thrust Identification of the Spin-Stabilized Magnetospheric Multiscale Formation

The Magnetospheric Multiscale (MMS) mission consists of four identically instrumented, spin-stabilized observatories, elliptically orbiting the Earth in a tetrahedron formation. For the operational success of the mission, on-board systems must be able to deliver high-precision orbital adjustment maneuvers. On MMS, this is accomplished using feedback from on-board star sensors in tandem with accelerometers whose measurements are dynamically corrected for errors associated with a spinning platform. In order to determine the required corrections to the measured acceleration, precise estimates of attitude, rate, and mass-properties are necessary. To this end, both an on-board and ground-based Multiplicative Extended Kalman Filter (MEKF) were formulated and implemented in order to estimate the dynamic and quasi-static properties of the spacecraft.

Formation Flying↗
NASA NTRS1973

Nutation control during precession of a spin-stabilized spacecraft

The effects of precession thrust pulses and energy dissipation upon nutation of a spin-stabilized spacecraft are studied. Methods for controlling nutation during a precession maneuver are proposed and examined. A precession modulation control law is developed which uses precession thrust pulses to control nutation. Digital simulations show that precession control with separate nutation control is the fastest precessing system; however, the precession modulation method is only fractionally slower while not requiring a separate nutation control system.

Taylor, J. M.↗
NASA NTRS1974

Exploiting environmental torques for attitude control and determination of spin stabilized satellites

Design techniques are presented which exploit environmental torques for attitude control and determination of spin stabilized satellites. The techniques are applicable to satellite missions where the dominant environmental torques are well understood and lend themselves to accurate analytical modeling. The techniques were applied to the Particles and Fields subsatellites of the Apollo 15 and 16 spacecraft and the flight results show good agreement with the attitude determination estimates obtained.

Gluck, R.↗
NASA NTRS1972

An approach to attitude determination for a spin-stabilized spacecraft (IMP 1)

The analysis and the FORTRAN program are presented for the determination of attitude of a spin-stabilized spacecraft. The use of telemetry data that provide information about two reference vectors and their relation to the spin is outlined. A technique for the determination of the spin-axis orientation that employs only simple calculations is described.

Fang, A. C.↗
NASA NTRS1973

Computer simulation for time optimal or energy optimal attitude control of spin-stabilized spacecraft.

An original technique for determining the optimal magnetic torque strategy for control of the attitude of spin stabilized spacecraft is presented. By employing Lagrange multipliers and the Calculus of Variations, optimal control equations are derived which define minimum time and minimum energy attitude maneuvers. Computer program algorithms to numerically solve these optimal control equations are also described. The performance of this technique is compared with a commonly employed planning method.

Woolley, R. D.↗
NASA NTRS1960

Flight Performance of a Spin-Stabilized 20-Inch-Diameter Solid-Propellant Spherical Rocket Motor

A successful flight test of a spin-stabilized 20-inch-diameter solid-propellant rocket motor having a propellant mass fraction of 0.92 has been made. The motor was fired at altitude after being boosted by a three-stage test vehicle. Analysis of the data indicates that a total impulse of 44,243 pound-second with a propellant specific impulse of approximately 185 was achieved over a total action time of about 12 seconds. These results are shown to be in excellent agreement with data from ground static firing tests of these motors. The spherical rocket motor with an 11-pound payload attained a velocity of 15,620 feet per second (m = 16.7) with an incremental velocity increase for the spherical motor stage of 12,120 feet per second.

Levine, Jack↗