Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SPACECRAFT CONFIGURATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Nuclear radiation problems, unmanned thermionic reactor ion propulsion spacecraft

A nuclear thermionic reactor as the electric power source for an electric propulsion spacecraft introduces a nuclear radiation environment that affects the spacecraft configuration, the use and location of electrical insulators and the science experiments. The spacecraft is conceptually configured to minimize the nuclear shield weight by: (1) a large length to diameter spacecraft; (2) eliminating piping penetrations through the shield; and (3) using the mercury propellant as gamma shield. Since the alumina material is damaged by the high nuclear radiation environment in the reactor it is desirable to locate the alumina insulator outside the reflector or develop a more radiation resistant insulator.

Mondt, J. F.↗
NASA NTRS1990

A review of nuclear electric propulsion spacecraft system concepts

The last 25-30 years of system concepts and design philosophies for spacecraft employing nuclear-electric propulsion (NEP) are reviewed. NEP spacecraft-system design constraints and criteria are identified, including radiation exposure of humans and electronics, thermal control requirements, effluent contamination of spacecraft surfaces, surface erosion, launch-vehicle integration, operations and safety requirements, attitude control, EM interference, and power control and distribution. The impact on spacecraft design philosophy of these constraints and criteria is explored. Several NEP spacecraft are characterized and discussed with respect to the propulsion system used. The electric propulsion system catagories are electrothermal (arcjet), EM (magnetoplasmadynamic and pulsed-inductive thruster) and electrostatic (ion engine). A brief summary of the mission, nuclear power source, electric propulsion system, and spacecraft configuration are provided for each NEP spacecraft concept.

Deininger, W. D.↗
NASA NTRS1966

The pioneer spacecraft

Design history, spacecraft configuration, and experiments of Pioneer space probe in interplanetary flight

INTERPLANETARY FLIGHT↗
NASA NTRS1974

ATS-6 spacecraft design/performance

A description is given of major program objectives and experiment requirements established for ATS-6. The ability to slew across the earth's disk in less than 30 min was needed to support tightly scheduled communication operations involving different parts of the earth. Two major experiments were developed which involve direct satellite relay of educational color television programs to simple ground receivers. Details of spacecraft configuration are discussed along with aspects of spacecraft ground testing. The ATS-6 was successfully launched on schedule from Cape Canaveral on May 30, 1974, with the aid of a Titan IIIC. The in-orbit performance of the spacecraft communication subsystem has been excellent.

Redisch, W. N.↗
NASA NTRS1980

Configuration effects on satellite charging response

The response of various spacecraft configurations to a charging environment in sunlight was studied using the NASA Charging Analyzer Program code. The configuration features geometry, type of stabilization, and overall size. Results indicate that sunlight charging response is dominated by differential charging effects. Shaded insulation charges negatively result in the formation of potential barriers which suppress photoelectron emission from sunlit surfaces. Sunlight charging occurs relatively slowly: with 30 minutes of charging simulations, in none of the configurations modeled did the most negative surface cell reach half its equilibrium potential in eclipse.

Purvis, C. K.↗
NASA NTRS1986

The Venus radar mapper spacecraft design

This paper discusses the driving mission requirements on the VRM spacecraft, the resulting design, and the spacecraft performance capabilities. The spacecraft design is driven by fine pointing requirements for radar mapping resolution, by extremes of thermal environment in the Venus orbit, and by high instrument power requirements. The spacecraft design emphasized use of as much existing hardware and software as possible to meet the cost constraints. Existing design was used where hardware was not already available. The VRM spacecraft utilizes the spare Voyager High Gain Antenna (HGA) and equipment bus, the Galileo computers and power conditioning equipment, and Mariner Medium Gain Antenna (MGA). Further cost savings were possible by using the HGA for both radar mapping at S-band frequency and high rate data playback at X-band frequency. The use of the Star 48 B solid rocket motor for VOI reduced propulsion system cost and complexity. The design tradeoffs that led to the VRM spacecraft configuration and the performance capabilities of the spacecraft are summarized for each subsystem.

Gamber, T.↗
NASA NTRS1992

Planetary missions using microspacecraft technology

Some of the planetary missions using microspacecraft of mass on the order of 10 kg which are presently being considered at JPL are discussed. The primary benefits offered by this type of spacecraft is the small and relatively inexpensive launch vehicles and short program development schedules. A mission presently considered by the Asteroid Investigation with Microspacecraft (AIM) study is described with special attention given to the spacecraft configuration; the AIM mission will launch three spacecraft from a single Pegasus vehicle, achieving separate flybys for three near-earth asteroids. Attention is also given to the salient features of the Mars Rover Sample Return mission, the Venus Atmospheric Sounder, and the Comet Nucleus Mission, for which the application of microspacecraft technology is considered.

Short, Kendra L.↗
NASA NTRS1994

Simulation of the coupled multi-spacecraft control testbed at the Marshall Space Flight Center

The capture and berthing of a controlled spacecraft using a robotic manipulator is an important technology for future space missions and is presently being considered as a backup option for direct docking of the Space Shuttle to the Space Station during assembly missions. The dynamics and control of spacecraft configurations that are manipulator-coupled with each spacecraft having independent attitude control systems is not well understood and NASA is actively involved in both analytic research on this three dimensional control problem for manipulator coupled active spacecraft and experimental research using a two dimensional ground based facility at the Marshall Space Flight Center (MSFC). This paper first describes the MSFC testbed and then describes a two link arm simulator that has been developed to facilitate control theory development and test planning. The motion of the arms and the payload is controlled by motors located at the shoulder, elbow, and wrist.

Ghosh, Dave↗
NASA NTRS1980

Operational factors affecting microgravity levels in orbit

Microgravity levels desired for proposed materials processing payloads are fundamental considerations in the design of future space platforms. Disturbance sources, such as aerodynamic drag, attitude control torques, crew motion and orbital dynamics, influence the microgravity levels attainable in orbit. The nature of these effects are assessed relative to platform design parameters such as orbital altitude and configuration geometry, and examples are presented for a representative spacecraft configuration. The possible applications of control techniques to provide extremely low acceleration levels are also discussed.

Olsen, R. E.↗
NASA NTRS2002

The Maneuver Planning Process for the Microwave Anisotropy Probe (MAP) Mission

The Microwave Anisotropy Probe (MAP) was successfully launched from Kennedy Space Center's Eastern Range on June 30, 2001. MAP will measure the cosmic microwave background as a follow up to NASA's Cosmic Background Explorer (COBE) mission from the early 1990's. MAP will take advantage of its mission orbit about the Sun-Earth/Moon L2 Lagrangian point to produce results with higher resolution, sensitivity, and accuracy than COBE. A strategy comprising highly eccentric phasing loops with a lunar gravity assist was utilized to provide a zero-cost insertion into a lissajous orbit about L2. Maneuvers were executed at the phasing loop perigees to correct for launch vehicle errors and to target the lunar gravity assist so that a suitable orbit at L2 was achieved. This paper will discuss the maneuver planning process for designing, verifying, and executing MAP's maneuvers. A discussion of the tools and how they interacted will also be included. The maneuver planning process was iterative and crossed several disciplines, including trajectory design, attitude control, propulsion, power, thermal, communications, and ground planning. Several commercial, off-the-shelf (COTS) packages were used to design the maneuvers. STK/Astrogator was used as the trajectory design tool. All maneuvers were designed in Astrogator to ensure that the Moon was met at the correct time and orientation to provide the energy needed to achieve an orbit about L2. The Mathworks Matlab product was used to develop a tool for generating command quaternions. The command quaternion table (CQT) was used to drive the attitude during the perigee maneuvers. The MatrixX toolset, originally written by Integrated Systems, Inc., now distributed by Mathworks, was used to create HiFi, a high fidelity simulator of the MAP attitude control system. HiFi was used to test the CQT and to make sure that all attitude requirements were met during the maneuver. In addition, all ACS data plotting and output were generated in MatrixX. A final test used FlatSat, a real-time hardware-in-the-loop simulator, which used identical MAP flight code to simulate operations on the spacecraft. Simulations in FlatSat allowed the MAP team to verify maneuver commands, timing, and spacecraft configuration before the commands were sent up to the spacecraft for execution. The MAP maneuver team successfully pieced together all of these COTS tools for designing MAP's maneuvers and MAP is now collecting data at L2.

Mesarch, Michael A.↗
NASA NTRS1980

Configuration effects on satellite charging response

The paper presents a computer study of the response of various spacecraft configurations to a charging environment in sunlight using the NASCAP code. Configuration features considered include geometry, type of stabilization, and overall size. The most striking configuration effect observed is that type of stabilization. A spinning spacecraft is expected to exhibit slower charging of its structure but to develop larger electric field stresses across shaded insulation than is an identical spacecraft which is three-axis stabilized. Data from the ATS-5 and ATS-6 spacecraft are presented and discussed.

Purvis, C. K.↗
NASA NTRS1980

Shuttle/Payload Contamination Evaluation /SPACE/ - A systems level contamination model

The Shuttle/Payload Contamination Evaluation (SPACE) computer program was designed to three dimensionally synthesize the dynamics of the induced on-orbit molecular contaminant environment of the Shuttle Orbiter and a number of Spacelab payload carrier configurations. SPACE has the capability to accept any instrument or spacecraft configuration for contamination evaluation through manipulation of program input data. It represents a significant advancement over previous analytical or modeling techniques in that it is the first integrated systems level model of its type to collectively consider geometry (emphasizing surface shadowing), any arbitrary contaminant source(s) and the contaminant transport mechanisms of: (1) direct source-to-surface; (2) return flux due to molecular collisions with the ambient atmosphere and other contaminant molecules; and (3) reflection/reemission from structural surfaces.

Jarossy, F. J.↗
NASA NTRS1972

Optimal ascent trajectories of a two stage space shuttle vehicle

The effects of aerodynamic lift on the performance capability of a two stage space shuttle are discussed. The performance program uses three degrees of freedom to describe the trajectory of a point mass moving over the rotating earth. Two cases of ascent modes are described and compared. It is concluded that significant improvements in performance through the use of lift appear to be configuration dependent, and for this reason cannot be generalized for all spacecraft configurations.

Wilson, R. A.↗