Development of a Toolkit for Waveform Generator-Based Beam Signal Replication
This is an essay about the project that I worked on this summer. It was a program that was able to control a signal generator using scpi commands.
Manzo, D'Angelo↗
SEARCH · Engineering Papers
Results for “SIGNAL GENERATOR”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Microcontrollers Generate Timing Signals For CCD Arrays
Microcontrollers generate timing signals for charge-coupled-device array detectors in electronic system developed to test such detectors. With microcontroller, one changes timing signals via software, without changes in wiring. Approach more flexible, timing signals changed easier and quicker.
Hostetter, Marilyn K.↗
Spread spectrum communication link using surface wave devices
A fast lock-up, 8-MHz bandwidth 8,000 bit per second data rate spread spectrum communication link breadboard is described that is implemented using surface wave devices as the primary signal generators and signal processing elements. It uses surface wave tapped delay lines in the transmitter to generate the signals and in the receiver to detect them. The breadboard provides a measured processing gain for Gaussian noise of 31.5 dB which is within one dB of the theoretical optimum. This development demonstrates that spread spectrum receivers implemented with surface wave devices have sensitivities and complexities comparable to those of serial correlation receivers, but synchronization search times which are two to three orders of magnitude smaller.
Hunsinger, B. J.↗
A surface wave spread spectrum communication link.
This development has resulted in a fast lock-up, 8-MHz bandwidth, 8-KHz data rate, spread spectrum communication link breadboard that is implemented using surface wave devices as the primary signal generators and signal processing elements. It uses surface wave tapped delay lines (SWTDL's) in the transmitter to generate the signals and in the receiver to match filter detect them. The system also incorporates a re-entry delay line (circulating integrator) which increases the effective code length per data bit by eight-fold.
Fugit, B. R.↗
Modular, Microprocessor-Controlled Flash Lighting System
A microprocessor-controlled lighting system generates brief, precisely timed, high-intensity flashes of light for scientific imaging at frame rates up to about 1 kHz. The system includes an array of light-emitting diodes (LEDs) that are driven in synchronism with an externally generated timing signal (for example, a timing signal generated by a video camera). The light output can be varied in peak intensity, pulse duration, pulse delay, and pulse rate, all depending on the timing signal and associated externally generated control signals. The array of LEDs comprises as many as 16 LED panels that can be attached together. Each LED panel is a module consisting of a rectangular subarray of 10 by 20 LEDs of advanced design on a printed-circuit board in a mounting frame with a power/control connector. The LED panels are controlled by an LED control module that contains an AC-to-DC power supply, a control board, and 8 LED-panel driver boards. In prior LED panels, the LEDs are packaged at less than maximum areal densities in bulky metal housings that reduce effective active areas. In contrast, in the present LED panels, the LEDs are packed at maximum areal density so as to afford 100-percent active area and so that when panels are joined side by side to form the array, there are no visible seams between them and the proportion of active area is still 100 percent. Each panel produces an illuminance of .5 x 10( exp 4) lux at a distance of 5.8 in. (approx.1.6 cm). The LEDs are driven according to a pulse-width-modulation control scheme that makes it safe to drive the LEDs beyond their rated steady-state currents in order to generate additional light during short periods. The drive current and the pulse-width modulation for each LED panel can be controlled independently of those of the other 15 panels. The maximum allowable duration of each pulse of drive current is a function of the amount of overdrive, the total time to be spent in overdrive operation, and the limitations of the LEDs. The system is configured to limit the overdrive according to values specific to each type of LED in the array. These values are coded into firmware to prevent inadvertent damage to the LED panels.
Kiefer, Dwayne↗
Shunt regulation electric power system
A regulated electric power system having load and return bus lines is described. A plurality of solar cells interconnected in a power supplying relationship and having a power shunt tap point electrically spaced from the bus lines is provided. A power dissipator is connected to the shunt tap point and provides for a controllable dissipation of excess energy supplied by the solar cells. A dissipation driver is coupled to the power dissipator and controls its conductance and dissipation and is also connected to the solar cells in a power taping relationship to derive operating power therefrom. An error signal generator is coupled to the load bus and to a reference signal generator to provide an error output signal which is representative of the difference between the electric parameters existing at the load bus and the reference signal generator. An error amplifier is coupled to the error signal generator and the dissipation driver to provide the driver with controlling signals.
Wright, W. H.↗
Television camera video level control system
A video level control system is provided which generates a normalized video signal for a camera processing circuit. The video level control system includes a lens iris which provides a controlled light signal to a camera tube. The camera tube converts the light signal provided by the lens iris into electrical signals. A feedback circuit in response to the electrical signals generated by the camera tube, provides feedback signals to the lens iris and the camera tube. This assures that a normalized video signal is provided in a first illumination range. An automatic gain control loop, which is also responsive to the electrical signals generated by the camera tube 4, operates in tandem with the feedback circuit. This assures that the normalized video signal is maintained in a second illumination range.
Kravitz, M.↗
Multiplying video mixer system
A multiplying video mixer system including a digital signal generator for generating at least one overlay signal and an attribute control bit corresponding to each of a plurality of pixels. A background signal generator generates input background signals to which the attribute control bits are applied to effect the input background signals with a desired opaque/transparent attribute. At least one video multiplier multiplies the overlay attribute signals and background signals to produce an output video signal having an amplitude equal to the product of the amplitudes of the overlay and background signals.
Heckt, Neil W.↗
Method and apparatus for reducing spacecraft instrument induced jitter via multifrequency cancellation
A method, apparatus, article of manufacture, and a memory structure for compensating for instrument induced spacecraft jitter is disclosed. The apparatus comprises a spacecraft control processor for producing an actuator command signal, a signal generator, for producing a cancellation signal having at least one harmonic having a frequency and an amplitude substantially equal to that of a disturbance harmonic interacting with a spacecraft structural resonance and a phase substantially out of phase with the disturbance harmonic interacting with the spacecraft structural resonance, and at least one spacecraft control actuator, communicatively coupled to the spacecraft control processor and the signal generator for inducing satellite motion according to the actuator command signal and the cancellation signal. The method comprises the steps of generating a cancellation signal having at least one harmonic having a frequency and an amplitude substantially equal to that of a disturbance harmonic interacting with a spacecraft structural resonance and a phase substantially out of phase with the disturbance harmonic interacting with the spacecraft structural resonance, and providing the cancellation signal to a spacecraft control actuator. The apparatus comprises a storage device tangibly embodying the method steps described above.
Liu, Ketao↗
Inflight IFR procedures simulator
An inflight IFR procedures simulator for generating signals and commands to conventional instruments provided in an airplane is described. The simulator includes a signal synthesizer which generates predetermined simulated signals corresponding to signals normally received from remote sources upon being activated. A computer is connected to the signal synthesizer and causes the signal synthesizer to produce simulated signals responsive to programs fed into the computer. A switching network is connected to the signal synthesizer, the antenna of the aircraft, and navigational instruments and communication devices for selectively connecting instruments and devices to the synthesizer and disconnecting the antenna from the navigational instruments and communication device. Pressure transducers are connected to the altimeter and speed indicator for supplying electrical signals to the computer indicating the altitude and speed of the aircraft. A compass is connected for supply electrical signals for the computer indicating the heading of the airplane. The computer upon receiving signals from the pressure transducer and compass, computes the signals that are fed to the signal synthesizer which, in turn, generates simulated navigational signals.
Parker, L. C.↗
Design study of a low bit rate transmitter and simulator
The results achieved toward developing a baseline communications channel model for studying low bit rate telemetry transmissions from Venus Planetary Explorer spacecraft are presented. The overall communications systems model, discrete channel model, input signal generation, and signal acquisition model are discussed. Discrete Fourier transform considerations, sampling routines, and flow charts are included.
Zusman, F. S.↗
Nulling device for detection of trace gases by NDIR absorption
A nondispersive gas analyzing apparatus is described having a first chamber for containing a first gas, the density of which is determined. A source of radiant energy is provided for passing radiant energy through the first chamber. Modulation means are provided for modulating the radiant energy passing through the first chamber by modulating the volume of the chamber at the acoustic resonance frequency of the first gas and the chamber. Signal generating means, including a second chamber for containing a gas which is heated by radiant energy emerging from the first chamber and a microphonic means responsive to the resulting pressurization in the second chamber, is provided for generating a signal, having a frequency and amplitude corresponding to the modulation of the radiant energy in the first chamber.
Dimeff, J.↗
EMI characteristics of a potential control system
With the development and use of charged particle sources for controlling spacecraft potentials there is a need to better understand the effects of these systems on spacecraft operations. The emission of charged particles perturbs the spacecraft environment and signals are generated which may interfere with other vehicle functions. In particular, the generated signals are apt to interfere with detectors for observing waves that exist naturally in the space environment. Examples of this type of interference are presented from the SCATHA satellite during a period when the vehicle was highly charged. A plasma source on board the spacecraft succeeded in discharging the vehicle with each of four different operating modes. The VLF broadband receiver on SCATHA detected interference over the entire 0-5 kHz range of both the electric and magnetic field detectors during these charged particle emissions. This frequency range includes the 2 kHz electron gyrofrequency but is below the 9 kHz electron plasma frequency. The observations suggest that interference occurs through introduction of anomalous signals, and through suppression of background field measurements.
Donatelli, D. E.↗
Distress Transmitter and Receiver
Identifying distress signals sent and received automatically. Radio transmitter and receiver designed to be used together for location and identification of persons, aircraft, or ships in distress. Modulation of transmitted signal characterized by unique combination of frequencies, repetition rates, and duty cycles, so type or identity of vehicle or person in distress ascertained from signal. Receiver operates manually and monitored aurally in conventional manner: also includes automatic tuning and monitoring features to assist operator in measuring modulation characteristics and in detecting weak signals. Transmitter generates signal characterized by timed sequence of modulating pulses. Receiver automatically locks onto signal and identifies it according to modulation characteristics.
Wren, Paul E.↗
Media Controller For Receiving Data From A TAXI(TM) Link
TAXI(TM) media controller (TMC) is interface circuit that supports operation of test equipment in diagnosis of telemetry system in which data communicated via TAXI(TM) links. TMC designed specifically for use with TAXI(TM) test adapter for monitoring and testing telemetry data signals generated by payloads and other subsystems of Space Station Freedom. Overall, TMC characterized as providing interface between output part of a TAXI(TM) receiving chip and input port of memory system in test adapter. TMC detects some abnormalities in received data stream and resynchronizes stream to locally generated clock signal.
Stauffer, David R.↗
Systems and methods for flexible, high-density opto-electronic arrays
An opto-electronic probe system is disclosed. The probe system has a probe element including at least one microelectrode, with the probe element being implantable in tissue of an anatomy to receive electrical signals generated within the anatomy. A subsystem is included for at least one of generating excitation signals to be used in stimulating the anatomy, or for receiving electrical signals received from the anatomy. An interface portion is included which is in communication with the subsystem for communicating at least one of electrical signals or optical signals indicative of the electrical signals received by the microelectrode.
Patra, Susant↗
Waveform emission location determination systems and associated methods
Waveform emission location determination systems and associated methods are described. According to one aspect, a waveform emission location determination system includes a plurality of detectors configured to receive a waveform emitted by a source and to generate electrical signals corresponding to the waveform, processing circuitry configured to access data corresponding to the electrical signals generated by the detectors, use the data to determine a plurality of spheres, and wherein a surface of each of the spheres contains a location of the source when the waveform was emitted by the source, determine an intersection of the spheres, and use the intersection of the spheres to determine the location of the source when the waveform was emitted by the source.
Hughes, Michael S.↗
Wideband FM generation.
Wideband FM signal generation without frequency deviation or modulation frequency limitations by wave shaping FM triangular wave, discussing transmitter receiver distortion
Clarke, K. K.↗