Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SHAPE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

First results of radiation-driven, layered deuterium-tritium implosions with a 3-shock adiabat-shaped drive at the National Ignition Facility

Radiation-driven, layered deuterium-tritium plastic capsule implosions were carried out using a new, 3-shock “adiabat-shaped” drive on the National Ignition Facility. The purpose of adiabat shaping is to use a stronger first shock, reducing hydrodynamic instability growth in the ablator. The shock can decay before reaching the deuterium-tritium fuel leaving it on a low adiabat and allowing higher fuel compression. The fuel areal density was improved by ~25% with this new drive compared to similar “high-foot” implosions, while neutron yield was improved by more than 4 times, compared to “low-foot” implosions driven at the same compression and implosion velocity.

42 ENGINEERING↗
DOE OSTI2017

Free Surface Relaxations of Star-Shaped Polymer Films

Here, the surface relaxation dynamics of supported star-shaped polymer thin films are shown to be slower than the bulk, persisting up to temperatures at least 50 degrees above the bulk glass transition temperature T$bulk\atop{g}$. This behavior, exhibited by star-shaped polystyrenes (SPSs) with functionality f = 8 arms and molecular weights per arm M arm < M e (M e is the entanglement molecular weight), is shown by molecular dynamics simulations to be associated with a preferential localization of these macromolecules at the free surface. This new phenomenon is in notable contrast to that of linear chain polymer thin film systems where the surface relaxations are enhanced in relation to the bulk; this enhancement persists only for a limited temperature range above the bulk T$bulk\atop{g}$. Finally, evidence of the slow surface dynamics, compared to the bulk, for temperatures well above T g and at length and time scales not associated with the glass transition has not previously been reported for polymers.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Heat Transfer Characteristics of Particle and Air Flow Through Additively Manufactured Lattice Frame Material Based on Octet-Shape Topology

Particle-to-supercritical carbon dioxide (sCO 2 ) heat exchanger is a critical component in next-generation concentrating solar power (CSP) plants. The inherently low heat transfer between falling particles and sCO 2 imposes a challenge toward economic justification of levelized cost of electricity produced through solar energy. Introduction of integrated porous media with the walls bounding particle flow has the potential to enhance the overall particle-to-sCO 2 heat exchanger performance. Here, this paper presents an experimental study on heat transfer characterization of additively manufactured lattice frame material based on Octet-shaped unit cell with particles and air as working fluids. The lattice structures were additively manufactured in stainless steel (SS) 316L and SS420 (with 40% bronze infiltration) via Binder jetting process, where the lattice porosities were varied between 0.75 and 0.9. The mean particle diameters were varied from 266 μm to 966 μm. The effective thermal conductivity and averaged heat transfer coefficient were determined through steady-state experiments. It was found that the presence of lattice enhances the effective thermal conductivity by 2–4 times when compared to packed bed of particles alone. Furthermore, for gravity-assisted particle flow through lattice panel, significantly high convective heat transfer coefficients ranging from 200 W/m2K to 400 W/m2K were obtained for the range of particle diameters tested. The superior thermal transport properties of Octet-shape-based lattice frame for particle flow makes it a very promising candidate for particle-to-sCO 2 heat exchanger for CSP application.

14 SOLAR ENERGY↗
DOE OSTI2023

Spectral shaping of an ultrafast ytterbium fiber laser via a passive intracavity optical filter: a simple and reliable route to sub-45 fs pulses

We investigate the use of passive intracavity optical filters for controlling the laser output spectrum of a polarization-mode-locked, ultrafast ytterbium fiber laser. The overall lasing bandwidth is increased or extended by strategic choice of the filter cutoff frequency. Overall laser performance, including pulse compression and intensity noise, is investigated for both shortpass and longpass filters with a range of cutoff frequencies. The intracavity filter not only shapes the output spectra, but also provides a route for overall broader bandwidths and shorter pulses in ytterbium fiber lasers. These results demonstrate that spectral shaping with a passive filter is a useful tool to routinely achieve sub-45 fs pulse durations in ytterbium fiber lasers.

Cooper, Nicholas D.↗
NASA NTRS1973

The effect of nozzle inlet shape, lip thickness, and exit shape and size on subsonic jet noise

Far field noise data were taken for convergent nozzles of various shapes and sizes at subsonic velocities exceeding 400 feet per second. For a circular nozzle, the nozzle inlet shape and lip thickness had no effect on the noise level, directivity, or spectra when compared at the same nozzle exit diameter and peak exhaust velocity. A sharp edged orifice was one exception to this statement. Coannular nozzles can produce additional high frequency noise. Blunt ended centerbodies, where there is significant base drag, also generate significant additional noise. The total noise power generation was essentially the same for circular, slot, and plug nozzles of good aerodynamic shape. The noise radiation patterns were essentially the same for these nozzle shapes except near the nozzle exhaust axis.

Olsen, W. A.↗
NASA NTRS1988

Equilibrium shapes of rotating spheroids and drop shape oscillations

Recent work on the equilibrium shapes of a rotating spheroid and drop shape oscillations is reviewed. The related theoretical aspects of the equilibrium shapes of a rotating drop, the stability, shape oscillations, gravitational forces, and drop fission are examined. Experimental findings on figures of a rotating drop in an immiscible system, drop oscillations in an immiscible system, oscillations of a rotating drop, compound drop oscillations, and drop dynamics in space are addressed.

Wang, Taylor G.↗
NASA NTRS2004

Shaping off-axis metallic membrane reflectors using optimal boundary shapes and inelastic strains

This paper will describe a novel concept for constructing off-axis membrane reflector surfaces. Membrane reflectors have been extensively studied, including investigations into inflated lenticular architectures, shaping by spin casting, shaping using electrostatic forces, and shaping by evacuating behind a membrane surface stretched between circular or annular-shaped supports.

membrane↗
DOE OSTI2019

Magnesium Alloy ZK60 Tubing made by Shear Assisted Processing and Extrusion (ShAPE)

ZK60 Magnesium tubing has been friction extruded from as-cast billets and T5 conditioned bars using Shear Assisted Processing and Extrusion (ShAPE). Tubes having an outer diameter of 50.8 mm and wall thickness of 1.9 mm were extruded with >20 times less ram force compared to conventional extrusion due to the unique shearing conditions and tooling inherent to ShAPE. Microstructures of the as-cast billet and T5 bar feedstock materials were significantly different from each other in terms of grain size, texture, and second phase distribution; yet the resulting microstructures after ShAPE were remarkably similar. An average grain size of 4-5 microns, 20o tilt of basal texture away from the extrusion axis, and refined second phases having a uniform distribution were achieved independent of the feedstock material. Hardness for as-extruded and artificially aged tubes are presented with isotropic behavior explained by detailed microstructural analysis. This work suggests that bulk ZK60 magnesium alloys extrusions may be fabricated in a single step, with microstructures that are unobtainable with conventional extrusion.

Friction Stir Extrusion, Friction Consolidation an↗
DOE OSTI2018

Freestanding 3D Mesostructures, Functional Devices, and Shape-Programmable Systems Based on Mechanically Induced Assembly with Shape Memory Polymers

Capabilities for controlled formation of sophisticated 3D micro/nanostructures in advanced materials have foundational implications across a broad range of fields. Recently developed methods use stress release in prestrained elastomeric substrates as a driving force for assembling 3D structures and functional microdevices from 2D precursors. A limitation of this approach is that releasing these structures from their substrate returns them to their original 2D layouts due to the elastic recovery of the constituent materials. Here, a concept in which shape memory polymers serve as a means to achieve freestanding 3D architectures from the same basic approach is introduced, with demonstrated ability to realize lateral dimensions, characteristic feature sizes, and thicknesses as small as ≈500, 10, and 5 µm simultaneously, and the potential to scale to much larger or smaller dimensions. Wireless electronic devices illustrate the capacity to integrate other materials and functional components into these 3D frameworks. Quantitative mechanics modeling and experimental measurements illustrate not only shape fixation but also capabilities that allow for structure recovery and shape programmability, as a form of 4D structural control. These ideas provide opportunities in fields ranging from micro-electromechanical systems and microrobotics, to smart intravascular stents, tissue scaffolds, and others.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Hybrid-Lipid Bilayers Induce n -Alkyl-Chain Order in Reversed-Phase Chromatographic Surfaces, Impacting their Shape Selectivity for Aromatic Hydrocarbon Partitioning

Shape selectivity is important in reversed-phase liquid chromatographic separations, where stationary phases are capable of separating geometric isomers, thereby resolving solutes based on their three-dimensional structure or shape rather than other chemical differences. Numerous chromatographic studies have been carried out using n-alkyl-chain-modified columns to understand how molecular shape affects retention. For polycyclic aromatic hydrocarbons (PAHs), it was found that planar compounds were selectively retained over non-planar structures of comparable molecular weight on surfaces with longer n-alkyl chains, higher chain-density, or at lower temperatures, where selectivity likely arises with greater ordering of the n-alkyl chains. A limitation of these studies, however, is the small range of chain ordering that can be achieved and lack of a direct measure of the n-alkyl-chain order of the stationary phases. In this work, we employ a C 18 stationary phase modified with a monolayer of phospholipid as a means of significantly varying the n-alkyl chain order. These hybrid-supported lipid bilayers, which have previously been employed as membrane-like stationary phases for measuring lipophilicity, provide a unique approach to control n-alkyl chain ordering by varying the acyl chain length and degree of unsaturation of the phospholipid modifier. The degree of alkyl-chain order of the resulting modified surfaces is determined from the ratio of trans- versus gauche-conformers, measured in situ within individual porous particles by confocal Raman microscopy. This methodology was also used to assess the affinity of these surfaces for planar versus non-planar PAH molecules. The retention selectivity for the planar versus non-planar compounds, thus determined, was found to vary significantly and systematically with the degree of order of the acyl/alkyl chains in the hybrid-supported lipid bilayers. Furthermore, the investigation also demonstrates the utility of confocal Raman microscopy for interrogating the impact of solute partitioning on stationary-phase structure within porous chromatographic particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Thermal Shape Stability of fcc Metal Nanocrystals Synthesized with Faceted Nonequilibrium Shapes

Highly refined capabilities of the shape-controlled solution-phase synthesis of metal nanocrystals (NCs) allow the generation of NCs with faceted nonequilibrium shapes, which optimize properties for target applications such as catalysis and plasmonics. Often, for such applications and also for TEM analysis, the NCs are removed from the solution-phase environment. We explore the postsynthesis evolution of these metastable NCs in a high-vacuum TEM environment. Specifically, here we analyze their reshaping toward the equilibrium Wulff shapes mediated by surface diffusion, where such reshaping degrades the above-mentioned optimized properties. Typical sizes for these NCs range from 5 to 30 nm or 10 3 –10 6 atoms, and reshaping often occurs on the time scale of minutes for temperatures around, say, 400 °C. We discuss the development of predictive stochastic atomistic-level models for NC evolution with a realistic description of surface diffusion. These models, in contrast to Molecular Dynamics, can naturally address the relevant time and length scales for these systems. KMC simulation results for the stochastic models are described, focusing on the reshaping of slightly elongated nanorods and of mildly truncated octahedra and nanocubes. In addition, we review appropriate theoretical formulations for reshaping, which involves the nucleation and growth on 2D islands or layers on outer facets of the NC. We note the limitations of classical nucleation theory in some scenarios and demonstrate the successes of a more fundamental and general master equation-based analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Shape Effect Undermined by Surface Reconstruction: Ethanol Dehydrogenation over Shape-Controlled SrTiO 3 Nanocrystals

For this research, to gain an in-depth understanding of the surface properties relevant for catalysis using ternary oxides, we report the acid–base pair reactivity of shape-controlled SrTiO 3 (STO) nanocrystals for the dehydrogenation of ethanol. Cubes, truncated cubes, dodecahedra, and etched cubes of STO with varying ratios of (001) and (110) crystal facets were synthesized using a hydrothermal method. Low-energy ion scattering (LEIS) analysis revealed that the (001) surface on cubes of STO is enriched with SrO due to surface reconstruction, resulting in a high ratio of strong base sites. Chemical treatment with dilute nitric acid to form etched cubes of STO resulted in a surface enriched with Ti cations and strong acidity. Furthermore, the strength and distribution of surface acidic sites increase with the ratio of (110) facet from cubes to truncated cubes to dodecahedra for STO. Kinetic, isotopic, and spectroscopy methods show that the dehydrogenation of ethanol proceeds through the facile dissociation of the alcohol group, followed by the cleavage of the C α –H bond, which is the rate-determining step. Co-feeding of various probe molecules during catalysis, such as NH 3 , 2,6-di-tert-butylpyridine, CO 2 , and SO 2 , reveals that a pair of Lewis acid site and basic surface oxygen atom is involved in the dehydrogenation reaction. The surface density of acid–base site pairs was measured using acetic acid as a probe molecule, allowing initial acetaldehyde formation turnover rates to be obtained. Comparison among various catalysts reveals no simple correlation between ethanol turnover rate and the percentage of either surface facet ((001) or (110)) of the STO nanocrystals. Instead, the reaction rate is found to increase with the strength of acid sites but reversely with the strength of base sites. The acid–base property is directly related to the surface composition as a result from different surface reconstruction behaviors of the shaped STO nanocrystals. Lastly, the finding in this work underscores the importance of characterizing the top surface compositions and sites properties when assessing the catalytic performance of shape-controlled complex oxides such as perovskites.

(001) facet↗
DOE OSTI2019

Nanoscale self-healing mechanisms in shape memory ceramics

Abstract Shape memory ceramics, such as yttria-stabilized tetragonal zirconia (YSTZ), offer unique properties including ultra-high operating temperatures and high resistance to oxidation. However, they are susceptible to formation of defects during manufacturing and/or by mechanical deformation. To completely take advantage of their shape memory properties, it is necessary to fully understand the nano-structural evolution of defects under external stimuli. In this study, defect evolution behaviors in YSTZ nanopillars are investigated by atomistic simulations. Two characteristic orientations of $$\left[ {01\bar 1} \right]$$ 01 1 ¯ and [001] are selected to represent the dominant deformation mechanisms of phase transformation and dislocation migration, respectively. Volume expansion associated with the tetragonal to monoclinic phase transformation is observed to promote healing of crack and void. Atom stress analyses reveal stress concentrations along the newly formed monoclinic phase bands. A critical crack width is identified, less than which the crack can be fully closed in compression. For [001]-oriented YSTZ nanopillars, dislocation migration leads to formations of an amorphous phase, which also assist the crack and void closure process. The revealed crack/void healing mechanisms may provide a path for mitigating internal defects that influences the mechanical properties and deformation mechanisms of shape memory ceramics.

Zhang, Ning (ORCID:0000000240661837)↗
DOE OSTI2016

Performance of indirectly driven capsule implosions on the National Ignition Facility using adiabat-shaping

A series of indirectly driven capsule implosions has been performed on the National Ignition Facility to assess the relative contributions of ablation-front instability growth vs. fuel compression on implosion performance. Laser pulse shapes for both low and high-foot pulses were modified to vary ablation-front growth and fuel adiabat, separately and controllably. Three principal conclusions are drawn from this study: (1) It is shown that reducing ablation-front instability growth in low-foot implosions results in a substantial (3-10X) increase in neutron yield with no loss of fuel compression. (2) It is shown that reducing the fuel adiabat in high-foot implosions results in a significant (36%) increase in fuel compression together with a small (10%) increase in neutron yield. (3) Increased electron preheat at higher laser power in high-foot implosions, however, appears to offset the gain in compression achieved by adiabat-shaping at lower power. These results taken collectively bridge the space between the higher compression low-foot results and the higher yield high-foot results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Studies of the shapes of heavy pear-shaped nuclei at ISOLDE

For certain combinations of protons and neutrons there is a theoretical expectation that the shape of nuclei can assume octupole deformation, which would give rise to reflection asymmetry or a ”pear-shape” in the intrinsic frame, either dynamically (octupole vibrations) or statically (permanent octupole deformation). I will briefly review the historic evidence for reflection asymmetry in nuclei and describe how recent experiments carried out at REX-ISOLDE have constrained nuclear theory and how they contribute to tests of extensions of the Standard Model. I will also discuss future prospects for measuring nuclear shapes from Coulomb Excitation: experiments are being planned that will exploit beams from HIE-ISOLDE that are cooled in the TSR storage ring and injected into a solenoidal spectrometer similar to the HELIOS device developed at the Argonne National Laboratory.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗