Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SF6”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Numerical study to assess sulfur hexafluoride as a medium for testing multielement airfoils

A methodology is described for computing viscous flows of air and sulfur hexafluoride (SF6). The basis is an existing flow solver that calculates turbulent flows in two dimensions on unstructured triangular meshes. The solver has been modified to incorporate the thermodynamic model for SF6 and used to calculate the viscous flow over two multielement airfoils that have been tested in a wind tunnel with air as the test medium. Flows of both air and SF6 at a free-stream Mach number of 0.2 and a Reynolds number of 9 x 10(exp 6) are computed for a range of angles of attack corresponding to the wind-tunnel test. The computations are used to investigate the suitability of SF6 as a test medium in wind tunnels and are a follow-on to previous computations for single-element airfoils. Surface-pressure, lift, and drag coefficients are compared with experimental data. The effects of heavy gas on the details of the flow are investigated based on computed boundary-layer and skin-friction data. In general, the predictions in SF6 vary little from those in air. Within the limitations of the computational method, the results presented are sufficiently encouraging to warrant further experiments.

Bonhaus, Daryl L.↗
NASA NTRS1992

Modifications to Langley 0.3-m TCT adaptive wall software for heavy gas test medium, phase 1 studies

The scheme for two-dimensional wall adaptation with sulfur hexafluoride (SF6) as test gas in the NASA Langley Research Center 0.3-m Transonic Cryogenic Tunnel (0.3-m TCT) is presented. A unified version of the wall adaptation software has been developed to function in a dual gas operation mode (nitrogen or SF6). The feature of ideal gas calculations for nitrogen operation is retained. For SF6 operation, real gas properties have been computed using the departure function technique. Installation of the software on the 0.3-m TCT ModComp-A computer and preliminary validation with nitrogen operation were found to be satisfactory. Further validation and improvements to the software will be undertaken when the 0.3-m TCT is ready for operation with SF6 gas.

Murthy, A. V.↗
NASA NTRS2017

Estimating the Distribution of Colored Dissolved Organic Matter During the Southern Ocean Gas Exchange Experiment Using Four-Dimensional Variational Data Assimilation

We diagnosed the effect of various physical processes on the distribution of mixed-layer colored dissolved organic matter (CDOM) and a sulfur hexauoride (SF6) tracer during the Southern Ocean Gas Exchange Experiment (SO GasEx). The biochemical upper ocean state estimate uses in situ and satellite biochemical and physical data in the study region, including CDOM (absorption coefcient and spectral slope), SF6, hydrography, and sea level anomaly. Modules for photobleaching of CDOM and surface transport of SF6 were coupled with an ocean circulation model for this purpose. The observed spatial and temporal variations in CDOM were captured by the state estimate without including any new biological source term for CDOM, assuming it to be negligible over the 26 days of the state estimate. Thermocline entrainment and photobleaching acted to diminish the mixed-layer CDOM with time scales of 18 and 16 days, respectively. Lateral advection of CDOM played a dominant role and increased the mixed-layer CDOM with a time scale of 12 days, whereas lateral diffusion of CDOM was negligible. A Lagrangian view on the CDOM variability was demonstrated by using the SF6 as a weighting function to integrate the CDOM elds. This and similar data assimilation methods can be used to provide reasonable estimates of optical properties, and other physical parameters over the short-term duration of a research cruise, and help in the tracking of tracer releases in large-scale oceanographic experiments, and in oceanographic process studies.

Del Castillo, C. E.↗
NASA NTRS1984

Rate constant for the OH + CO reaction - Pressure dependence and the effect of oxygen

The effect of pressure on the rate constant of the OH + CO reaction has been measured for Ar, N2, and SF6 over the pressure range 200-730 torr. All experiments were at room temperature. The method involved laser-induced fluorescence to measure steady-state OH concentrations in the 184.9 nm photolysis of H2O-CO mixtures in the three carrier gases, combined with supplementary measurements of the CO depletion in these same carrier gases in the presence and absence of competing reference reactants. The effect of O2 on the pressure effect was determined. A pressure enhancement of the rate constant was observed for N2 and SF6, but not for Ar, within an experimental error of about 10 percent. The pressure effect for N2 was somewhat lower than previous literature reports, being about 40 percent at 730 torr. For SF6 a factor of two enhancement was seen at 730 torr. In each case it was found that O2 had no effect on the pressure enhancement. The roles of the radical species HCO and HOCO were evaluated.

Demore, W. B.↗
NASA NTRS1986

Laser anemometry measurements of natural circulation flow in a scale model PWR reactor system

The natural circulation of a single phase fluid in a scale model of a pressurized water reactor system during a postulated grade core accident is analyzed. The fluids utilized were water and SF6. The design of the reactor model and the similitude requirements are described. Four LDA tests were conducted: water with 28 kW of heat in the simulated core, with and without the participation of simulated steam generators; water with 28 kW of heat in the simulated core, with the participation of simulated steam generators and with cold upflow of 12 lbm/min from the lower plenum; and SF6 with 0.9 kW of heat in the simulated core and without the participation of the simulated steam generators. For the water tests, the velocity of the water in the center of the core increases with vertical height and continues to increase in the upper plenum. For SF6, it is observed that the velocities are an order of magnitude higher than those of water; however, the velocity patterns are similar.

Kadambi, J. R.↗
NASA NTRS1987

The effect of wind and currents on gas exchange in an estuarine system

The objectives were to develop a non-volatile tracer to use in gas exchange experiments in laterally unconfined systems and to study applications of deliberate tracers in limnology and oceanography. Progress was made on both fronts but work on the development of the non-volatile tracer proved to be more difficult and labor intensive that anticipated so no field experiments using non-volatile tracers was performed as yet. In the search for a suitable non-volatile tracer for an ocean scale gas exchange experiment a tracer was discovered which does not have the required sensitivity for a large scale experiment, but is very easy to analyze and will be well suited for smaller experiments such as gas exchange determinations on rivers and streams. Sulfur hexafluoride, SF6, was used successfully as a volatile tracer along with tritium as a non-volatile tracer to study gas exchange rates from a primary stream. This is the first gas exchange experiment in which gas exchange rates were determined on a head water stream where significant groundwater input occurs along the reach. In conjunction with SF6, Radon-222 measurements were performed on the groundwater and in the stream. The feasibility of using a combination of SF6 and radon is being studied to determine groundwater inputs and gas exchange of rates in streams with significant groundwater input without using a non-volatile tracer.

Broecker, W. S.↗
NASA NTRS1993

Investigation of etching techniques for superconductive Nb/Al-Al2O3/Nb fabrication processes

Wet etching, CF4 and SF6 reactive ion etching (RIE), RIE/wet hybrid etching, Cl-based RIE, ion milling, and liftoff techniques have been investigated for use in superconductive Nb/Al-Al2O3/Nb fabrication processes. High-quality superconductor-insulator-superconductor (SIS) junctions have been fabricated using a variety of these etching methods; however, each technique offers distinct tradeoffs for a given process an wafer design. In particular, it was shown that SF6 provides an excellent RIE chemistry for low-voltage anisotropic etching of Nb with high selectivity to Al. The SF6 tool has greatly improved the trilevel resist junction insulation process. Excellent repeatability, selectivity with respect to quartz, and submicron resolution make Cl2 + BCl3 + CHCl3 RIE a very attractive process for trilayer patterning.

Lichtenberger, A. W.↗
NASA NTRS1959

Halogen-Containing Gases as Boundary Lubricants for Corrosion-Resistant Alloys at 1200 F

The extreme temperatures anticipated for lubricated parts in advanced flight powerplants dictate the consideration of unconventional methods of lubrication such as solid lubricants and the reactive gases described in the present research. These halogen-containing "reactive" gases such as dichlorodifluoromethane, CF2Cl2, are among the most stable of organic molecules. The high "flash" temperatures generated at the contacting asperities as a result of frictional heat are sufficient to cause local decomposition of the halogen-containing gases. The active atoms thus released (e.g., chlorine) then react with the metal to be lubricated to form halides capable of effective lubrication. The presence of small amounts of a sulfur-containing gas (e.g., 1 percent sulfur hexafluoride, SF6) was found to catalyze the formation of metal halides. Friction and wear studies were made with a hemisphere (3/16-in. rad.) rider sliding in a circumferential path on the flat surface of a rotating disk (2 1/2-in. diam.). The specimens of corrosion-resistant 2 alloys were run in an atmosphere of the various gases with a load of 1200 grams, a sliding velocity of 120 feet per minute, and temperature from 75 to 1200 F. An effective lubricant for ferritic materials (M-1 tool steel) was CF2Cl2, but significant corrosion occurred above 600 F. Corrosion evaluation in CF2Cl2 suggested a number of nickel- and cobalt-base alloys for additional lubrication study. Several combinations of gases and these metals were found to lubricate to 1200 F without excessive corrosion. The gases were CF2Cl2 Plus 1 percent SF6, monobromotrifluoromethane CF3Br plus 1 percent SF6, dibromodifluoromethane CF2Br2, iodotrifluoromethane, CF3I, and I2. Careful selection of metals and gas are necessary for successful lubrication over specific temperature ranges. Optimum combinations give friction coefficients as low as 0.05 without

Buckley, Donald H.↗
NASA NTRSDate not supplied

Observations of the Age of Air from the Northern Hemisphere Midlatitude Surface

Understanding and modeling the interhemispheric transport (IHT) of trace gases and aerosols is important for interpreting past (and projecting future) changes in atmospheric composition. One IHT measure -- the mean age since air was last at the Northern Hemisphere (NH) midlatitude surface – represents a fundamental property of tropospheric transport that can be estimated from measurements of sulfur hexafluoride (SF6). Here we use SF6 measurements obtained from the recent NASA Atmospheric Tomography Mission (ATom) to construct observational estimates of the mean age throughout the troposphere. We compare the ATom based ages, which span all four seasons during the period 2016-2018 over both the Pacific and Atlantic Oceans, with previous in situ-based estimates obtained from the HIAPER Pole‐to‐Pole Observations (HIPPO) project, which are available only for the Pacific. In order to interpret the observed variations in mean age and their relationship with the large-scale flow we use simulations of the Goddard Earth Observing System (GEOS) general circulation model, constrained with meteorological fields derived from the Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2), performed over the entire MERRA-2 period (including ATom). We confirm results from previous studies showing that the model ages are biased old compared to the observational estimates. However, we also show that this model bias is reduced in more recent years, which we interpret in terms of changes in the latitudinal distribution of SF6 emissions over the 2000s.

interhemispheric transport (IHT)↗
NASA NTRS1976

High-resolution threshold photoelectron spectroscopy by electron attachment

A new technique for measuring high-resolution threshold photoelectron spectra of atoms, molecules, and radicals is described. It involves photoionization of a gaseous species, attachment of the threshold, or nearly zero electron to some trapping molecule (here SF6 or CFCl3), and mass detection of the attachment product (SF6/-/ or Cl/-/ respectively). This technique of threshold photoelectron spectroscopy by electron attachment was used to measure the spectra of argon and xenon at 11 meV (FWHM) resolution, and was also applied to CFCl3.

Ajello, J. M.↗
NASA NTRS1977

Studies of Ar and N2 using threshold photoelectron spectroscopy by electron attachment /TPSA/

Threshold photoelectron spectra of Ar and N2 are studied by a technique called threshold photoelectron spectroscopy by electron attachment, which involves the attachment of the threshold electron to SF6 followed by the detection of SF6(-). Studies on Ar provide a measure of the rejection ratio for nonthreshold electrons of this technique. A rotational propensity rule is given which states that an autoionizing N2 state prefers to decay to N2(+) states with a minimum change in rotational angular momentum.

Chutjian, A.↗
NASA NTRS1980

The hollow-cathode helium-fluorine laser

It is possible to obtain uniform stable long-pulse excitation (in excess of 100 microsec) in gas mixtures involving highly electronegative constituents (SF6, CCl4, NF3, and I2). Such a system was used to investigate the atomic fluorine laser. In the hollow cathode, lasing on fluorine transitions in the doublet system lasted for up to 80 microsec with no signs of the self-termination as reported previously in positive-column devices. The excitation process of the laser appears to depend heavily upon the fluorine donor utilized. For instance, a single-step process is involved when NF3 is used whereas a two-step process is evident for SF6. The details are discussed.

Crane, J. K.↗
NASA NTRS1984

Capillary rise, wetting layers, and critical phenomena in confined geometry

Interferometric procedures have been used to measure the thickness of the wetting layers of liquid SF6 which intrude between SF6 vapor and the walls of an interferometer. Close to the critical temperature the measurements show that the layers become thicker as the height at which they are observed approaches the height of the bulk liquid-vapor meniscus. The functional form of the thickness increase agrees with the dependence expected from models in which the layers' thicknesses are governed by a competition between gravitational and van der Waals forces. The layers are a factor of three thicker than a simple estimate based on such models. No evidence is found of a transition from three-dimensional critical behavior towards two-dimensional critical behavior in the available temperature and size ranges. This contrasts with the interpretation of experiments in binary liquid mixtures carried out with comparable size and temperature resolution.

Moldover, M. R.↗
NASA NTRS1985

Fast laser-induced aerosol formation for visualization of gas flows

A technique for aerosol seeding of gas flows by laser-induced particle formation is demonstrated using a pulsed Nd:YAG laser (1.06 microns) for optical breakdown of a mixture of SF6 and H2 in an inert carrier gas. It is noted that, contrary to the smoke-wire approach, the laser-induced particles form first in zones of high turbulence, since mixing enhances coagulation. The method also allows seeding to be performed in locations hardly accessible otherwise and is mechanically nonintrusive. Finally, a study of the mixture and the breakdown effects indicates that for H2:SF6 ratios between 3:1 and 15:1 the particle formation is only limited by the physics of the gas/particle conversion.

Hassa, C.↗
NASA NTRS1986

Pressure and temperature dependences of the reaction of OH with nitric acid

Rate constants for the reaction of OH with HNO3 have been measured by using a laser flash photolysis resonance absorption technique at 298 and 248 K in the presence of 10-730 Torr of He, N2, and SF6. A dependence on total pressure was observed with rate constant values increasing at 298 K from 1.11 x 10 to the -13th cu cm/molecule/s at 10 Torr to 1.45 x 10 to the -13th cu cm/molecule/s at 730 Torr, and at 248 K from 1.87 x 10 to the -13th cu cm/molecule/s at 10 Torr to 3.07 x 10 to the -13th cu cm/molecule/s at 730 Torr with helium as the diluent gas. Falloff behavior occurred at lower pressures with SF6 or N2 as the diluent gas. Extrapolated zero pressure rate constants were determined and correspond to an Arrhenius activation energy of E/R = -710 K.

Stachnik, R. A.↗
NASA NTRS1992

Detection of artificially created negative ion clouds with incoherent scatter radar

The physical mechanisms by which negative ions change the shape of the incoherent scatter spectrum, and the way in which shape changes may be used to detect the presence of heavy positive and negative ions in an ambient ionosphere are investigated. In order to detect heavy negative ions, the temperature structure of the ionosphere is fixed to a prevent average measurement, and any changes in spectral shape during the experiment are interpreted as being caused by changes in composition, and not by changes in the temperature ratio Te/Ti. The spatial and temporal development of heavy negative ion plasma clouds created during four active chemical release experiments was observed. Concentrations of 10-40-percent SF6(-) were detected in SPINEX 1, SPINEX 2, and IMS data sets. An average uncertainty of +/-10-percent SF6(-) is present in all three experiments. Concentrations of 30-percent Br(-) were detected in the NICARE 1 release, with uncertainties of +/-4 percent.

Sultan, Peter J.↗
NASA NTRS1993

Infrared spectroscopic measurements relevant to atmospheric remote sensing

SF6 is a synthetic chemical which is used in many industrial applications and as a meteorological tracer. This paper describes determinations of spectral absorption coefficients k-nu of SF6 measured in the central Q-branches of the nu(3)-fundamental at 947/cm at various temperature-pressure combinations representing tangent heights in solar-occultation experiments or layers in the atmosphere. Spectral data were also obtained for C2H4 and NH3 fundamental bands. Measurements were made with the Doppler-limited spectral resolution of a tunable diode laser spectrometer with a cryogenically cooled absorption cell, described by Varanasi and Chudamani (1992).

Varanasi, Prasad↗
NASA NTRS1995

Spectroscopic data for thermal infrared remote sensing

There has been extensive world-wide use of chloro-fluoro-carbons (CFC's), especially CFC-11 (CFCl3) and CFC-12 (CF2Cl2), hydro-chloro-fluoro-carbons (HCFC's), HCFC-22 (CHFCl2) in particular, and sulphur hexaflouride (SF6) in numerous many industrial applications. These chemicals possess either a strong ozone-depletion potential or a global-warming potential, or both, and pose a threat to the inhabitability of our planet. Recognition of this fact has led to significant curtailment, if not total banishment, of their use globally. However, as recent satellite observations have shown, decline in their atmospheric concentrations may not be immediate. The marked depletion of ozone which has been observed in recent years at high latitudes has made infrared remote sensing of the atmosphere an activity of high priority. The success of any infrared remote sensing experiment conducted in the atmosphere depends upon the availability of accurate, high-resolution, spectroscopic data that are applicable to that experiment. This paper presents a preliminary phase of a multi-faceted work using a Fourier-transform spectrometer (FTS) which is in progress in our laboratory. The concept of how laboratory-borne measurements can be geared toward obtaining a database that is directly applicable to satellite-borne remote sensing missions is the main thrust of this paper which addresses itself to ongoing or planned international space missions. Spectroscopic data on the unresolvable bands of the above mentioned as well as several other man-made gases and on the individual spectral lines of such naturally present trace gases as CO2, N2O, NH3, and CH4 are presented. There is often significant overlap between the isolated lines of better known bands of the more abundant species and the weaker absorption features identifiable as bands of the currently less abundant CFC's, HCFC's, and SF6.

Varanasi, P.↗