Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SCRAP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Total Recycling of Copper Cable Scrap and Production of Carbon Using Fast Microwave Technology

The recycling of cable scrap, particularly from discarded electrical wiring, is gaining significant attention due to the rising demand for copper and the need for sustainable management of electronic waste. Traditionally, mechanical and thermal processings have been used to recover copper and plastic from cables. However, these approaches are often energy-intensive, time-consuming, and costly in terms of equipment and labor. In this study, we present a simple and effective method for recovering materials from cable scrap using a domestic microwave oven. Cable pieces (2–2.5 cm long) were exposed to 700 W of microwave irradiation under rotation for 30 s, enabling the rapid and efficient separation of high-quality copper metal from the core wire, and activated carbon from the carbonized plastic sheath. Microwaves facilitate this process through Ohmic heating, which induces electrical resistance in the metal, generating heat that mechanically loosens the metal and carbonized plastic components. The process demonstrates high efficiency, achieving an 80% reduction in energy consumption compared to conventional processings. This fast and energy-efficient method shows strong potential for scaling up to industrial recycling, offering a cost-effective and environmentally friendly way to recover high-quality materials for further use or repurposing.

Bourlinos, Athanasios B. (ORCID:0000000256165993)↗

Recovering rare earth metals from magnet scrap

A method is provided for treating a rare earth metal-bearing scrap material by melting an extractant selected from the group consisting of bismuth (Bi) and lead (Pb) and contacting the melted extractant and the scrap material at a temperature and time to recover at least one of the light rare earth metal content and the heavy rare earth metal content as a metallic extractant alloy, which can be subjected to vacuum distillation or sublimation to recover the rare earth metal(s). The method can be practiced to recover the light rare earth metal content and the heavy rare earth metal content concurrently in a one-step process or separately and sequentially in a two-step process.

Ott, Ryan T.↗

Gold and palladium adsorption from leached electronic scrap using ordered mesoporous carbon nanoscaffolds

Ordered mesoporous carbon (OMC) nanoscaffolds are engineered agglomerates of carbon nanotubes held together by small carbon nanofibers with uniform pore sizes, high pore volume, and high channel permeability. These materials exhibit very high affinity for the adsorption of gold from aqueous acidic mixtures. The efficiency of gold recovery is comparable to those typically accomplished using biopolymer-based adsorbents. The adsorption efficiency for other precious metals such as palladium and platinum is lower. Studies on the precious metal (Au, Pd) adsorption on OMC materials from actual liquors of leached electronics will be presented. Adsorption properties will be compared for several different sorbents used for the recovery of precious metals. The leach liquor compositions for three different types of electronic scrap materials (personal computer board, cell phone and tv input/output board) will be presented. The sorption efficiencies for Au, Pd, together with a spectrum of competing and non-competing metals, from such leach mixtures will be compared.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Selective Extraction and Recovery of Nd and Dy from Nd-Fe-B Magnet Scrap by Utilizing Molten MgCl{sub 2}

Fundamental experiments are conducted with the aim of developing an efficient recycling process for rare earth elements (REEs) from neodymium-iron-boron (Nd-Fe-B) permanent magnet scrap. Molten magnesium dichloride (MgCl{sub 2}) was chosen as an extraction medium, which can selectively chlorinate and extract REEs in magnet alloys. Dysprosium-containing Nd-Fe-B magnet alloy was immersed in molten MgCl{sub 2} at 1273 K (1000 °C) for 3 to 12 hours. The results of the experiments clearly show that the REEs in the magnetic alloy were successfully extracted into the molten salt, while the Fe-B alloy remained in a solid form. The extraction ratios of Nd and Dy were at most 87 and 78 mass pct, respectively. After the extraction experiment, excess MgCl{sub 2} and Mg were removed by vacuum distillation and the rare earth chlorides were recovered. Thus, the feasibility of this method for efficient recovery of rare earths using molten MgCl{sub 2} is demonstrated.

36 MATERIALS SCIENCE↗

Separation and Recovery of High-Purity Dysprosium from Electric Vehicle Scrap Permanent Magnets Using Cyanex 572, a Cationic Extractant in a Membrane Solvent Extraction Process

Rare earth elements (REEs), especially heavy rare earth elements such as dysprosium (Dy), have gained immense attention globally due to their widespread use in many state-of-the-art technologies. Consequently, demand for REEs is increasing rapidly in comparison to their supply. Recycling of REEs from end-of-life (EoL) electronic waste (e-waste) can help to mitigate the increasing gap between the demand and supply of REEs. This study reports the separation and recovery of high-purity Dy from various feedstocks such as scrap permanent magnets (SPMs), electric vehicle (EV) magnets, and mixed rare earth oxides (REOs) using an economically viable and scalable membrane solvent extraction (MSX) process. First, the optimized conditions (organic phase composition and feed solution acid concentration) for the separation of Dy from light REEs such as neodymium (Nd) and praseodymium (Pr) were evaluated using liquid–liquid extraction. Thereafter, a multistage MSX process was developed to separate high purity (>99.5 wt %) Dy from Nd and Pr using Cyanex 572, a cationic extractant. Using feedstocks with varying initial compositions, the MSX process obtained 100% pure Dy with 63–96% Dy recovery in three to six stages with a maximum extraction rate of 2.9 g m–2 h –1 . Purity of the recovered Dy was confirmed via additional characterization such as scanning electron microscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction. This novel MSX process holds immense potential for industry deployment for the separation of heavy and light rare REEs from a wide range of e-waste.

electrical vehicle magnets↗

Tracking Flows of End-of-Life Battery Materials and Manufacturing Scrap

This paper defines terms such as “recycling rate” that enable the characterization of flows of battery materials and expands the terminology to accommodate the description of complex product recycling. It also estimates the maximum percentage of U.S. demand for critical elements that could be satisfied by recycling as demand continues to grow, and it defines and estimates the recycling rate for lithium-ion batteries. Finally, it clarifies the role of manufacturing scrap as the domestic U.S. supply chain is built up. It concludes that recycling will be important in the long term, but growth still requires that new material be extracted to supply additional material.

25 ENERGY STORAGE↗

Experiments in anodic film effects during electrorefining of scrap U-10Mo fuels in support of modeling efforts

A monolithic uranium molybdenum alloy clad in zirconium has been proposed as a low enriched uranium (LEU) fuel option for research and test reactors, as part of the Reduced Enrichment for Research and Test Reactors program. Scrap from the fuel's manufacture will contain a significant portion of recoverable LEU. Pyroprocessing has been identified as an option to perform this recovery. A model of a pyroprocessing recovery procedure has been developed to assist in refining the LEU recovery process and designing the facility. Corrosion theory and a two mechanism transport model were implemented on a Mat-Lab platform to perform the modeling. In developing this model, improved anodic behavior prediction became necessary since a dense uranium-rich salt film was observed at the anode surface during electrorefining experiments. Experiments were conducted on uranium metal to determine the film's character and the conditions under which it forms. The electro-refiner salt used in all the experiments was eutectic LiCl/KCl containing UCl{sub 3}. The anodic film material was analyzed with ICP-OES to determine its composition. Both cyclic voltammetry and potentiodynamic scans were conducted at operating temperatures between 475 and 575 C. degrees to interrogate the electrochemical behavior of the uranium. The results show that an anodic film was produced on the uranium electrode. The film initially passivated the surface of the uranium on the working electrode. At high over potentials after a trans-passive region, the current observed was nearly equal to the current observed at the initial active level. Analytical results support the presence of K{sub 2}UCl{sub 6} at the uranium surface, within the error of the analytical method.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Safe and Effective Deactivation of Metallic Sodium Filled Scrap and Cold Traps From Sodium-cooled Nuclear Reactor D and D - 12176

As part of the Plateau Remediation Project at US Department of Energy's Hanford, Washington site, CH2M Hill Plateau Remediation Company (CHPRC) contracted with IMPACT Services, LLC to receive and deactivate approximately 28 cubic meters of sodium metal contaminated debris from two sodium-cooled research reactors (Enrico Fermi Unit 1 and the Fast Flux Test Facility) which had been stored at Hanford for over 25 years. CHPRC found an off-site team composed of IMPACT Services and Commodore Advanced Sciences, Inc., with the facilities and technological capabilities to safely and effectively perform deactivation of this sodium metal contaminated debris. IMPACT Services provided the licensed fixed facility and the logistical support required to receive, store, and manage the waste materials before treatment, and the characterization, manifesting, and return shipping of the cleaned material after treatment. They also provided a recycle outlet for the liquid sodium hydroxide byproduct resulting from removal of the sodium from reactor parts. Commodore Advanced Sciences, Inc. mobilized their patented AMANDA unit to the IMPACT Services site and operated the unit to perform the sodium removal process. Approximately 816 Kg of metallic sodium were removed and converted to sodium hydroxide, and the project was accomplished in 107 days, from receipt of the first shipment at the IMPACT Services facility to the last outgoing shipment of deactivated scrap metal. There were no safety incidents of any kind during the performance of this project. The AMANDA process has been demonstrated in this project to be both safe and effective for deactivation of sodium and NaK. It has also been used in other venues to treat other highly reactive alkali metals, such as lithium (Li), potassium (K), NaK and Cesium (Cs). (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The Evaluation of Chemical Decontamination for Contaminated Carbon Steel Scrap by Multiphase Treatment Process - 20249

There is a significant growth in the field of decommissioning of nuclear facilities due the fact that for a lot of them their end of life is nearing. In Taiwan, the government plans to steadily reduce the dependence on nuclear power and moves gradually towards a nuclear-free homeland. Therefore, the development of decommissioning technology becomes the significant issue for the next coming years. The decommissioning of a nuclear power plant is a long process and practical work including radiological surveys, decontamination, dismantling, and the subsequent waste management. Chemical decontamination is an important task in the decommissioning of nuclear power plants and is usually performed by circulating the chemical solution in selected systems or full systems in order to reduce dose levels. However, the decontamination of segmented metal parts is also considered to reduce the contamination to such levels that they may be disposed of at a lower classification or be unconditionally released, and it helps to achieve the goal of waste minimization and provide a more economical cost for disposal management. Chemical decontamination technology is used to remove the contaminated oxides deposited on the surface of metals by dissolving them with chemical mechanisms, such as chelation, acidic or alkaline dissolution, redox reaction and so on. Carbon steel is the major material used in systems and pipelines in the nuclear power plant, thus it is also commonly selected as the target to be decontaminated in the decommissioning process. In this study, the effectiveness of chemical decontamination is evaluated by using multiphase treatment process including the reduction and the oxidation steps. In the step of redox reaction, the oxidation state of the substance is very important. Especially metals of some oxidation states show solubility in water, which has a decisive influence on the chemical decontamination. The experiment of decontamination of metal scraps is carried out by the immersion method within a chemical solution. The relative operation parameters such as temperature, pH, and concentration of the chemical solution are recorded to demonstrate the effect of the decontamination process. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Solid-state transformations during laser directed energy deposition of Ti-6Al-4V powder hydride-dehydrided from scrap metals

During laser directed energy deposition (DED-LB), thermal cycling and powder chemical composition produce distinct thermal histories, which vary mechanical properties. Using real-time X-ray diffraction, this study investigates solid-state transformations during DED-LB to understand process-structure-property relationships for angular Ti-6Al-4V powder hydride–dehydrided from scrap metals. Results showed that regions near the molten pool experienced high cooling rates, leading to martensitic transformation from the β phase and increased hardness. Regions farther from the molten pool underwent tempering without solid-state transformation and decreased hardness. These findings support alternative feedstocks for metal additive manufacturing for a circular economy and resilient supply chains.

Additive manufacturing (AM)↗

Ultra-low concentration terbium (Tb) adsorption on garlic peels biosorbent and its application for $\mathrm{Nd}$-$\mathrm{Fe}$-$\mathrm{B}$ scraps recovery

Motivated by the strategic value of middle-heavy rare earth elements (MHREEs), we proposed a bio-adsorption method to recover ultra-low concentration terbium (Tb(Ⅲ)) from industrial wastewater that originated from the Nd-Fe-B scraps recovery process. It could be found that Tb(Ⅲ) ions as low as 5.34 ng·mL -1 (ppb) could be adsorbed onto Ca(Ⅱ)-modified garlic peels (Ca-GP) within 10 min with the adsorption efficiency of 99.2% at pH 3.5. The adsorption behavior of Tb(Ⅲ) onto Ca-GP conformed the Langmuir isotherm model and pseudo-second-order kinetic model. Attenuated total reflection Fourier Transform Infrared Spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS) and density-functional theory (DFT) calculations results showed that Tb(Ⅲ) ions could be ion-exchanged with cations in Ca-GP such as Ca(Ⅱ) and -COOH. In application, column experiment results showed that the maximum bed adsorption capacity for Tb, praseodymium (Pr), neodymium (Nd), dysprosium (Dy), and Total rare earth elements (REEs) ions calculated by the Thomas model was 0.06, 3.50, 9.65, 7.34, and 27.37 µg·g -1 , respectively, with the initial concentration of 0.37 ng·mL -1 Tb, 20 ng·mL -1 Pr, 44 ng·mL -1 Nd, 67 ng·mL -1 Dy and 170 ng·mL -1 total REEs ions of actual solutions (below the solubility of rare-earth hydroxide). Here this manuscript thus provided a novel cost-effective and efficient approach to the enrichment and recovery of MHREEs from ultra-low concentration REEs ions-containing solutions.

54 ENVIRONMENTAL SCIENCES↗

Techno-economic and life cycle assessment of aluminum electrorefining from mixed scraps using ionic liquid

Aluminum production from bauxite ore uses significantly high amount of energy and capital expenditure. Recycle and reuse of aluminum can be economical and minimize the environmental impacts. Smelter based recycle and reuse of aluminum is used in recent days, however, it also uses high amount of energy with high cost of production and yields high life cycle impacts. The University of Alabama has developed aluminum electrorefining technology from mixed scraps using ionic liquids as an alternative to traditional smelter based recycle and reuse. This study has explored the techno-economical, and life cycle viability of that technology. An excel-based techno-economic and life cycle assessment model was developed at Idaho National Laboratory for techno-economic and life cycle assessment. SimaPro was used to get the necessary database for the life cycle assessment. This study determined that a 20,000 kg/day ionic liquid-based electrorefining system can be profitable with a net yearly profit of $2.00 million. Further, in terms of net global warming potential, it emits 0.92 kg CO 2 equivalent per kg of aluminum recycled, whereas the traditional smelter-based recycle technology emits 1.57 kg CO 2 equivalent per kg of aluminum recycled, and the aluminum production from bauxite ore emits 17.8 kg CO 2 equivalent per kg of aluminum produced. In other life cycle assessment categories, electrorefining of aluminum emits >88 % less than aluminum production from bauxite ore and it is also better than traditional aluminum recycling in six out of ten categories studied. This makes ionic liquid-based electrorefining technology a very promising technology in terms of process economics and environmental sustainability.

36 MATERIALS SCIENCE↗

An environmentally friendly ball milling process for recovery of valuable metals from e-waste scraps

Highlights: • A new ball milling process was successfully developed for recovery of metals from e-waste. • The process produce soluble metallic compound with dry ball milling and benefits the leaching process. • Precious metals were successfully separated from base metals during the process. • Mechanism of the mechanochemical reactions was proposed. - Abstract: The present study reports a mechanochemical (MC) process for effective recovery of copper (Cu) and precious metals (i.e. Pd and Ag) from e-waste scraps. Results indicated that the mixture of K{sub 2}S{sub 2}O{sub 8} and NaCl (abbreviated as K{sub 2}S{sub 2}O{sub 8}/NaCl hereafter) was the most effective co-milling reagents in terms of high recovery rate. After co-milling with K{sub 2}S{sub 2}O{sub 8}/NaCl, soluble metallic compounds were produced and consequently benefit the subsequent leaching process. 99.9% of Cu and 95.5% of Pd in the e-waste particles could be recovered in 0.5 mol/L diluted HCl in 15 min. Ag was concentrated in the leaching residue as AgCl and then recovered in 1 mol/L NH{sub 3} solution. XRD and XPS analysis indicated that elemental metals in the raw materials were transformed into their corresponding oxidation state during ball milling process at low temperature, implying that solid–solid phase reactions is the reaction mechanism. Based on the results and thermodynamic parameters of the probable reactions, possible reaction pathways during ball milling were proposed. Suggestion on category of e-waste for ball milling process was put forward according to the experiment results. The designed metal recovery process of this study has the advantages of highly recovery rate and quick leaching speed. Thus, this study offers a promising and environmentally friendly method for recovering valuable metals from e-waste.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Purification of U from U-10Mo scrap generated during the fabrication of high performance research reactor fuel

A low enriched U-Mo alloy fuel is under development to replace highly enriched U fuels currently used in United States high performance research reactors. The alloy casting and fuel fabrication processes will generate scrap streams containing low enriched U (LEU) which must be recovered. Solvent extraction processes were designed using the Argonne Model for Universal Solvent Extraction (AMUSE) to purify solutions containing 20 and 50 g/L U. The feed for the solvent extraction processes was prepared from solutions generated from the dissolution of U-10Mo-Zr foils and U-10Mo-Zr-Al mini-plates. The U purification processes were demonstrated using two, 16-stage banks of miniature mixer-settlers. The solvent extraction experiments demonstrated that all design objectives for the U purification processes could be met. The U recovery in the product stream for each flowsheet was ≥99.9%. The flowsheet demonstrations also showed that the purity of the U Product will meet the requirements of the ASTM International C1462-21 specification for LEU metal enriched to less than 20% 235 U. In conclusion, the AMUSE modeling for both flowsheet demonstrations was validated by comparing predicted and measured concentrations of U, Mo, and Zr in the exit streams and stage samples at steady-state conditions in the mixer-settlers.

modified PUREX process↗

scraps: An open-source Python-based analysis package for analyzing and plotting superconducting resonator data

We present "scraps" (SuperConducting Analysis and Plotting Software), a Python package designed to aid in the analysis and visualization of large amounts of superconducting resonator data, specifically complex transmission as a function of frequency, acquired at many different temperatures and driving powers. The package includes a least-squares fitting engine as well as a Monte-Carlo Markov Chain sampler for sampling the posterior distribution given priors, marginalizing over nuisance parameters, and estimating covariances. A set of plotting tools for generating publication-quality figures is also provided in the package. Lastly, we discuss the functionality of the software and provide some examples of its utility on data collected from a niobium-nitride coplanar waveguide resonator fabricated at Argonne National Laboratory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Economically Viable “Green” Carbon Anodes for Lithium-ion Batteries from Recycled Scrap Tires

The technical objective of this technical collaboration small business voucher (SBV) proposal was to develop methods at Oak Ridge National Laboratory (ORNL) to reduce the surface area and impurity contents present in the recovered carbon from scrap tires. Recycled tires have been used to make low-cost carbon anodes for lithium-ion batteries (LIB) with a cost-reduction of over 11-12%. Graphite is being used as the anode in LIBs. Oak Ridge National Laboratory (ORNL) has successfully recovered carbon composites from recycled tires with a yield of over 50% and demonstrated the electrochemical performance in a coin lithium ion cell configuration as an active anode material better than commercial graphite anode batteries [1]. ORNL has tailored the morphology of carbon powders from shredded recycled tires using a sulfonation process followed by pyrolysis to produce a highly value-added product and demonstrated its feasibility in LIBs. ORNL developed the methods to reduce impurities and surface area and provided carbon to Lawrence Berkley National Laboratory (LBNL) for detailed characterizations including lithium-ion battery testing. This SBV pilot project will also provide R&D infrastructure to FWD:Energy, Inc. (FWD) to establish a pre-pilot process to scale-up the synthesis of carbon composites from recycled tires and illustrate a high value commodity for anodes in large format LIBs.

25 ENERGY STORAGE↗

Closing the Loop on Automotive Carbon Fiber Prepreg Manufacturing Scrap

The project demonstrated how to “close the loop” on carbon fiber by integrating industrial carbon fiber scrap into new functional components in an automotive lightweighting application. The project serves as a validation of discontinuous recycled carbon fiber in a commercial context, while generating comprehensive material data throughout the production chain.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗