Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SASSYS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Carbonation of MgO Single Crystals: Implications for Direct Air Capture of CO 2

Direct air capture (DAC) may be feasible to remove carbon dioxide (CO 2 ) from the atmosphere at the gigaton scale, holding promise to become a major contributor to climate change mitigation. Mineral looping using magnesium oxide (MgO) is potentially an economical, efficient, and sustainable pathway to gigaton-scale DAC. The hydroxylation and carbonation of MgO determine the efficiency of the looping process, but their rates and mechanisms remain uncertain. Here, in this work, MgO single crystals were reacted in air or CO 2 at varying humidities and characterized by X-ray scattering, microscopy, and vibrational spectroscopy. Results show that the hydroxylation formed a brucite (Mg(OH) 2 )-like layer immediately after crystal cleaving. Concurrently, the carbonation formed hydrated magnesium carbonate phases, including barringtonite (MgCO 3 ·2H 2 O) and nesquehonite (MgCO 3 ·2H 2 O), in the layer. Rapid initial growth of the layer is also manifested in short-range bending/warping of nanocrystallites, resulting in multiple orientations of the same phases on the surface. The layer growth slowed down over time, indicating surface passivation. The formation of barringtonite and nesquehonite with 1:1 CO 3 /Mg ratio indicates an efficient carbonation when compared to other magnesium carbonate phases of lower ratio. Our results are essential for understanding surface passivation mechanisms and tackling the passivation issue of mineral looping DAC technology.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Impacts of Focused Ion Beam Processing on the Fabrication of Nanoscale Functionalized Probes

Herein, we examine the impact of Ga + ion kinetic energy and the target material type on the extent of ion implantation and structural damage in atomic force microscopy probes made of Al 2 O 3 and ZnO manufactured by focused ion beam (FIB) using scanning transmission electron microscopy and energy-dispersive X-ray mapping. Penetration of Ga into the Al 2 O 3 lattice induced structural distortions and amorphization. For ZnO probes, Ga is uniformly dispersed across the surface, resulting in the formation of distinct clusters. Atom probe tomography further validates the Ga distributions in Al 2 O 3 and ZnO nanoprobes. Complementary Monte Carlo simulations with the transport of ions in the matter program indicated that the introduction of Ga + prompts the generation of cation and anion vacancies, an occurrence more pronounced in Al 2 O 3 compared to ZnO. In conclusion, this study not only enriches the knowledge of ion-matter interactions, but also serves as a practical guide for the fabrication of nanoscale functionalized AFM probes.

Al2O3↗
DOE OSTI2026

Fingerprinting Uranium Oxides with Electron Energy Loss Spectroscopy Supported by Theoretical Computations

Uranium oxides occur in a variety of phases that differ in crystal structure and uranium oxidation states. Electron energy loss spectroscopy (EELS) is one of the few techniques that has sufficient spatial resolution and sensitivity to electronic structure to distinguish amongst phases at the nanoscale. However, beam-sensitive materials such as uranium oxides are subject to spectral modification due to interactions with the electron beam. Therefore, theory support is essential to reliably exclude the impact of beam damage and generate true reference datasets. Here we use a comparison of theoretical and experimental spectra to probe the impact of beam damage on O K-edge and U N-edge (N6,7 and N4,5) EELS spectra of various single-valent and mixed-valence uranium oxide bulk phases. Using a low-dose experimental set-up, we show that the O K-edge theoretical spectra are in excellent agreement with experiment for both peak positions and relative intensities of respective peaks. In contrast, U N-edge features are less distinguishing due to the partially localized nature of the U 5f orbitals and overlapping multiplet and spin–orbit coupling effects. This work demonstrates that O K-edge EELS is sufficiently diagnostic to distinguish a wide range of uranium oxides and that the experimental approach used here minimizes beam damage and allows valence state discrimination across the U(IV), U(V) and U(VI) series. When combined with imaging modes available in electron mi-croscopy, the work enables detailed investigation and characterization of uranium redox transformations at the nanoscale.

Carbone, Jacopo↗
DOE OSTI2017

First-Principles Fe L 2,3 -Edge and O K-Edge XANES and XMCD Spectra for Iron Oxides

X-ray absorption near-edge structure (XANES) and X-ray magnetic circular dichroism (XMCD) spectroscopies are tools in widespread use for providing detailed local atomic structure, oxidation state, and magnetic structure information for materials and organometallic complexes. The analysis of these spectra for transition-metal L-edges is routinely performed on the basis of ligand-field multiplet theory because one- and two-particle mean-field ab initio methods typically cannot describe the multiplet structure. Here we show that multireference configuration interaction (MRCI) calculations can satisfactorily reproduce measured XANES spectra for a range of complex iron oxide materials including hematite and magnetite. MRCI Fe L2,3-edge XANES and XMCD spectra of Fe(II)O6, Fe(III)O6, and Fe(III)O4 in magnetite are found to be in very good qualitative agreement with experiment and multiplet calculations. Point-charge embedding and small distortions of the first-shell oxygen ligands have only small effects. Oxygen K-edge XANES/XMCD spectra for magnetite investigated by a real-space Green’s function approach complete the very good qualitative agreement with experiment. Material-specific differences in local coordination and site symmetry are well reproduced, making the approach useful for assigning spectral features to specific oxidation states and coordination environments.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2020

Evolution of Radicals from the Photolysis of High Ionic Strength Alkaline Nitrite Solutions

Reactive nitrogen species (RNS), along with reactive oxygen species (ROS), are significant products from radiolysis in solution. While much research has been focused on biological systems, these species are also important products in the autoradiolysis that occurs in nuclear waste. In this work, we determine the correlation between solution constituents, particularly nitrite, and radical products in highly alkaline solutions relevant to liquid waste. Because these radicals tend to be very short-lived, we employ spin trapping in conjunction with electron paramagnetic resonance (EPR) to detect them and quantify their production. Most spin traps do not function in these conditions (>1 M NaOH); however, nitroalkanes such as nitromethane will act as spin traps in their aci form, which is dominant at high pH. To restrict the products to those originating from nitrite, we use 280–480 nm UV light to generate radicals, avoiding products from the photolysis of water. Under these circumstances, nitric oxide, nitrite radicals, and hydroxyl radicals are detected, and the trends with the concentration of the constituents of the solutions are tracked. These include nitrite, nitrate, hydroxide, and carbonate. We find that, while the equilibrium shifts with increasing pH from hydroxyl radicals to the more slowly reacting oxide radicals, the production of nitrite radicals does not decrease.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Phase Transition and Liquid-like Superionic Conduction in Ag 2 S

Superionic conductivity in certain polymorphs of Ag 2 S has inspired numerous concepts for materials applications, but the relationship between the structure and the mobility of silver ions remains poorly explored. In this paper, we report ab initio molecular dynamics simulations for low- (acanthite) and high-temperature (argentite) Ag 2 S polymorphs that reveal the dynamical processes, giving rise to the superionic behavior in the latter. Similarities between their sulfur sublattices enable simulations of silver ion diffusivities and pathways on essentially an equal footing. For the higher temperature polymorph, calculated temperature-dependent mean square displacements and activation energies by the nudged elastic band method show good correspondence with expectations from the experiment. In the superionic state, silver atoms diffuse in a liquid-like behavior with no preferred diffusion pathways, within the relatively stable body-centered cubic sulfur framework. Conversely, conduction in acanthite appears to depend more on the mobilities of electronic charge carriers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Surface Hydration and Hydroxyl Configurations of Gibbsite and Boehmite Nanoplates

Discontinuation of the bulk structure at the interface between metal oxide particles and water leads to altered bonding characteristics and unique facet-dependent molecular environments. Surface hydration and consequent hydroxylation adds further complexity to the interface, details that for metal (oxy)hydroxides are especially difficult to isolate from the background signal of bulk structural hydroxyls. Here we probe for the first time the hydroxylation and hydration structures on basal surfaces of gibbsite (?-Al(OH)3) and boehmite (?-AlOOH) nanoplates at ambient conditions, using the interface-sensitive technique vibrational sum frequency generation spectroscopy (VSFG). Hydroxyl stretching modes at the interfaces with adsorbed water layers compared directly to Raman and infrared bulk modes show that while gibbsite surface frequencies were sharp and nearly identical to those in the bulk, boehmite surface hydroxyls displayed a very different broad spectrum of states. Ab initio molecular dynamics simulations of both basal surfaces with and without hydration waters reveal that gibbsite surface hydroxyls interact only weakly with overlying hydration waters remaining essentially unperturbed, whereasthose on boehmite can interact more strongly facilitated by higher configurational degrees of freedom at the interface. The findings clearly unveil substantial differences in the hydrated interfacial dynamics of these two otherwise similar materials, with implications for their interfacial chemistry and wettability.

Sassi, Michel JPC↗
DOE OSTI2020

Consequences of 131 I Transmutation in Gas Phase Radioiodine Molecules and Adsorbed on Graphite Surface

In the case of nuclear power plant accidents, several radionuclides are being dispersed into the environment. In particular, the release of radioiodine 131 I represents a major health concern because of its absorption by the thyroid gland. To reduce the release of 131 I into the environment, capture materials, such as activated carbon, provide a mean to efficiently retain radioiodine-bound molecular species. Here, we use ab initio molecular dynamic calculations to investigate the effects of 131 I radioactive decay on the molecular stability of I 2 , acid iodine (HI, HIO, HIO 2 , and HIO 3 ), and methyl-iodine species in both gas phase and adsorbed on graphite. In gas phase, we found that I 2 is the least resistant to 131 I transmutation, followed by the HIO x family of molecules, then HI and CH 3 I which are the most resistant. However, the graphite surface is found to greatly favorize the fragmentation of adsorbed molecular species. While the identification of gas phase fragments can offer new chemical route to consider in chemical kinetics models, the formation reactive fragment products at the graphite surface can favorize their reaction with surface carbon atoms which overtime could reduce the number of adsorption sites of capture materials available, and hence, impacting their capture capability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Radiation-Induced Interfacial Hydroxyl Transformation on Boehmite and Gibbsite Basal Surfaces

Understanding the radiolytic reactivity of aluminum oxyhydroxide phases widely present in stored nuclear wastes is essential to develop reliable processing approaches. Recent experiments using vibrational sum frequency generation (VSFG), a surface sensitive technique, have shown that rehydration of γ-irradiated boehmite (010) and gibbsite (001) surfaces does not recover the initial hydroxyl density prior to irradiation. In this study, using density functional theory and nudged elastic band calculations, we examine dehydration and rehydration of these surfaces and attendant proton transfer mechanisms. While dehydration of both surfaces is predicted to be energetically unfavorable, rehydration of boehmite (010) is favorable after overcoming an energy barrier of 0.52 eV that relates to the orientation of surface hydroxyls controlling the hydrogen bonding network of adsorbed water. In the case of gibbsite (001), for which the experimental results suggest that rehydration mainly involves the reformation of interlayer hydroxyls, we found that a two-proton transfer mechanism is more likely than a one-proton transfer mechanism, and that it prevents the reorientation of interlayer hydroxyls into intralayer hydroxyls consistent with experimental VSFG findings. A detailed analysis of the effect of surface hydrogen vacancy on the strength of hydrogen bond interactions was performed, which indicates that H 2 and H 2 O are the energetically most favorable product species to form from radiation-induced surface H and/or OH defects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Electric Field Effects on Water and Ion Structure and Diffusion at the Orthoclase (001)–Water Interface

Understanding the electrochemical properties of mineral–water interfaces tends to rely upon electrical double layer (EDL) models, but these models are based on the assumption that electrostatic equilibrium is constantly maintained. In reality, interfacial reactions, ion diffusion, and their electrochemical signatures are based in nonequilibrium conditions of locally or globally imbalanced electrical fields where current EDL models have limited purview. In this work, we performed molecular dynamics (MD) simulations of the orthoclase (001) surface in contact with a 1 M NaCl aqueous solution under various electric fields, to explore the interplay between EDL structure and dynamics when perturbed by electric fields of different direction and strength, by confinement, and by different distributions of structural surface charge. The simulations showed that confinement between two opposing (001) surfaces led to the development of an induced field when the applied field was perpendicular to the surfaces and, as a result, to ionic diffusion coefficients that were independent of electric field strength. In contrast, when the applied field was parallel to the surfaces, confinement resulted in ionic diffusion coefficients that were more strongly dependent on the magnitude of the electric field than in bulk water. Differences in the density and distribution of aluminol groups on the two surfaces had a significant impact on how the interfacial structure and dynamics varied in the presence of an electric field. Notably, these differences resulted in an electro-osmotic flow with opposite directions at the two surfaces under parallel applied electric field. Overall, the MD simulations highlighted the importance of considering atomic-level structure and heterogeneities when developing models of the electrochemical properties of mineral–water interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ab Initio Simulations of Tritium Diffusion in Al-Rich Iron Aluminide Coating Phases

Surface coatings of steels used in extreme conditions and corrosive environments generally aim to provide protection and increased durability. In the case of tritium-producing burnable absorber rods (TPBARs) used in nuclear reactors, a 316 stainless steel has been coated with Al. Scanning transmission electron microscopy (STEM) characterization of the coating found three Al-rich (>60 atom % Al) iron aluminide alloys identified as hexagonal FeNiAl 5 , monoclinic Fe 4 Al 13 , and orthorhombic Fe 2 Al 5 . Density functional theory simulations using nudged elastic band have been performed to investigate the diffusion of interstitial tritium in each Al-rich iron aluminide phase. While FeNiAl 5 and Fe 4 Al 13 can be viewed as the stacking of two layers, the structural peculiarity of Fe 2 Al 5 is that channels of variable Al vacancy content are present along the c-axis. Therefore, three stoichiometries for Fe 2 Al x phase, namely, Fe 2 Al 4 , Fe 2 Al 5 , and Fe 2 Al 6 , have been considered to evaluate the impact of Al vacancy concentration on tritium diffusion behavior. Altogether, we found that at 600 K, tritium diffusion decreases from a faster rate in the channels of Fe 2 Al x phases (D T ≤ 10 –11 m 2 ·s –1 ) to Fe 4 Al 13 (D T ≈ 10–12 m2·s–1), and finally in FeNiAl5 (D T ≈ 10 –13 m 2 ·s –1 ). Here, we also find that interstitial tritium generally diffuses faster in Fe–Al coating phases than in the tritium breeding material γ-LiAlO 2 (D T ≈ 10 –14 m 2 ·s –1 ) but slightly slower than in 316 stainless steel (D T ≈ 10 –10 m 2 ·s –1 ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Quantifying the Impact of Electric Fields on the Local Structure and Migration of Potassium Ions at the Orthoclase (001) Surface

Developing an understanding of the response of mineral/water interfaces to applied electric fields is central to detecting and interpreting signatures of interfacial processes in the subsurface. Here we focus density functional theory calculations on understanding K + cation binding and diffusion across the (001) surface of orthoclase feldspar under various applied electric fields with and without surface hydration. The calculations reveal how water ligands labilize surface K + cations for diffusion while also increasing their sensitivity to electric field effects on the binding energy at different surface sites. The calculations also show how the direction and strength of the electric field systematically affect surface cation mobility, sorption, and hydration behavior. Specifically, electric fields directed toward the surface increase the potassium binding energies, facilitate K + diffusion across multiple binding sites, and increase the propensity of surface K + ions to lose their hydration shells. Furthermore, the findings help fill a major knowledge gap into the impact of electric fields on mineral/water interface structure and dynamics more generally, featuring in this case a commonly found type of feldspar involved in a multitude of atmospheric and geochemical processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Insights into the Oxidation Mechanism of Vivianite to Metavivianite from First-Principles Calculations

Vivianite, a hydrous ferrous iron-phosphate mineral (Fe 3 (PO 4 ) 2 ·8H 2 O), readily oxidizes in contact with air yielding the less hydrous mixed-valent iron-phosphate mineral metavivianite. This topotactic transformation nominally occurs by oxidative dehydrogenation in which outgoing electrons from the iron sublattice are charge compensated by hydrolysis of structural water. However, the details of this internal charge balancing mechanism that allows the structure to remain electrostatically stable remain unknown. Here, in this study, we use density functional theory (DFT) calculations and ab initio thermodynamics (AIT) to evaluate the energetics of this process in terms of hydrogen release as a function of environmental variables such as partial pressure and temperature. The results show a thermodynamic driving force for vivianite phase transformation as oxidation progresses that is triggered by its rigid structure that has a limited accommodation for hydrogen vacancies. In contrast, metavivianite has a more flexible lattice and hydrogen bond network that stabilizes these hydrogen defects. Metavivianite is shown to be a stable intermediate for 66% residual Fe 2+ down to 33% Fe 2+ , below which other phases/structures such as santabarbarite should be more thermodynamically favorable. Our study provides a basis for experimental tests of our mechanistic findings and helps fill a basic knowledge gap about the solid-state process that defines how vivianite interacts with its surrounding environment.

Sassi, Michel [Pacific Northwest National Laborato↗
DOE OSTI2025

First-Principles Study of Molecular Hydrogen Activation by Defects in Boron Nitride

Here, we used density functional theory simulations in combination with ab initio thermodynamics to determine the H 2 partial pressure (p H2 )-dependent energetics associated with H 2 activation and recovery at various defect sites in hexagonal boron nitride (h-BN). We found that some defects are very reactive with hydrogen, thereby definitely trapping hydrogen in defective h-BN. However, depending on hydrogen partial pressure, less reactive defect sites can be populated. Because of the lower binding capability of these sites, they would allow hydrogen to be recycled and recovered. For small defect sizes, we found that hydrogen preferentially binds to nitrogen sites by forming N–H bonds, and if no N sites are available then boron sites would be the next to bind hydrogen. Hydrogen dissociation via frustrated Lewis pair is found to be more favorable than forming only N–H bonds but only if the defect size is large enough to accommodate steric effects. For specific conditions such as T = 400 K, p H2 = 1 bar, and only considering one molecular H 2 per defect, three defects, namely, the N monovacancy, 3V(1B2N), and hexagonal 6V(3B3N) could play a role in both the activation and recycling of H 2 as they would be reacting enough to allow a favorable splitting of H 2 while not binding too strongly to allow its recovery. More broadly, a range of p H2 and hydrogen loading conditions were investigated for different types of defects and the finding suggests that p H2 could be used to fine-tune the Gibbs free energy of hydrogenation, thereby allowing several types of defects at different hydrogen loading contents to play a role in the activation/recovery process of H 2 in defective h-BN.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Energy Barriers for H 2 Uptake and Release by Defects in Boron Nitride

Density functional theory simulations (DFT) have been used in combination with the climbing image nudged elastic band method (CI-NEB) to determine the energy barriers required to dissociate H 2 at four types of h-BN defects and evaluate the potential for reacted H species to hop to adjacent available sites. The defects were selected based on previous work in which ab initio thermodynamics was used to identify specific defects with optimal thermodynamics for reversible H 2 storage, that is, the defects would dissociate molecular H 2 while not binding H species too strongly so that hydrogen release is favorable. The four defects investigated are the N and B monovacancies, which only offer either B or N defective sites respectively, as well as larger cluster vacancy defects named 3V(1B2N) and hexagonal 6V(3B3N), which present a mixture of B and N defect sites available for H binding. While homogeneous H 2 dissociation by B and N monovacancies have energy barriers larger than 0.4 eV, we found that mixed BN terminated defects have energy barrier lower than 0.4 eV for H 2 dissociation. In particular, H 2 dissociation by the hexagonal 6V(3B3N) defect, exclusively made of Frustrated Lewis Pairs (FLPs), is almost barrierless. The energy barrier for subsequent H hopping to available adjacent B or N sites of the defect were also calculated. It was found that the hopping of H species generally involves high energy barriers ranging from 0.26 eV to 2.57 eV. In conclusion, this work completes previous thermodynamic theoretical investigations and provides a more comprehensive picture of H 2 reaction with defective h-BN for potential H 2 storage and recovery.

Sassi, Michel J. [Pacific Northwest National Labor↗
DOE OSTI2019

Two-Dimensional Lateral Epitaxy of 2H (MoSe₂)–1T' (ReSe₂) Phases

Two-dimensional (2D) transition metal dichalcogenide (TMDC) heterostructures have been proposed as potential candidates for a variety of applications like quantum computing, neuromorphic computing, solar cells, and flexible field effective transistors. The 2D TMDC heterostructures at the present stage face difficulties being implemented in these applications because of lack of large and sharp heterostructure interfaces. Herein, we address this problem via a CVD technique to grow thermodynamically stable heterostructure of 2H/1T' MoSe₂–ReSe₂ using conventional transition metal phase diagrams as a reference. In this paper, we demonstrate how the thermodynamics of mixing in the MoReSe₂ system during CVD growth dictates the formation of atomically sharp interfaces between MoSe₂ and ReSe₂, which can be confirmed by high-resolution scanning transmission electron microscopy imaging, revealing zigzag selenium-terminated interface between the epitaxial 2H and 1T' lattices. Our work provides useful insights for understanding the stability of 2D heterostructures and interfaces between chemically, structurally, and electronically different phases.

36 MATERIALS SCIENCE↗
DOE OSTI2024

An Impedance Humidity Sensor Based on CVD Grown WSe 2 2D Films

2D materials-based planar devices have been sought after for gas and humidity sensor applications owing to their high sensitivity due to their ultrathin nature and increased surface area. Herein, 2D WSe 2 films-based planner devices were fabricated to evaluate their performance for potential application in humidity sensors. The structure and morphology of the WSe 2 sensing films were studied by Raman spectroscopy, photoluminescence, optical microscopy, and scanning electron microscopy (SEM) techniques. The relative humidity-dependent sensing performances of the 2D WSe 2 films were evaluated using current–voltage (I–V), relative impedance, and complex total impedance (electrochemical impedance spectroscopy, EIS) techniques. This sensor showed a very stable and repeatable performance investigated over the period of 18 months. The response and recovery times of the WSe 2 -based impedance sensors were found to be 40 and 30 s, respectively. The WSe 2 sensor exhibits a 2 ± 1% minimum hysteresis at a lower humidity level (50% RH) and around 8 ± 2% maximum hysteresis at relative humidity level (70% RH). This value of hysteresis is in the acceptable range during the initial investigation of any material to explore its potential for application in humidity sensors. The density functional theory (DFT) analysis was performed with the interaction from water molecules of the WSe 2 sample for a better understanding of the sensing mechanism of devices.

2D- WSe2↗