Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Rubrene”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Persistence of Spin Coherence in a Crystalline Environment

Here, we analyze quantum interference in the triplet-exciton pair generated by singlet exciton fission in a molecular crystal and introduce transport-induced dephasing (TID) as a key effect that can suppress the expected fluorescence quantum beats when the triplet-exciton wave function can localize on inequivalent sites. TID depends on the triplet-exciton hopping rate between inequivalent sites and on the energy shifts among the stationary states of the entangled triplet pair in different spatial configurations. The theoretical model is confirmed by experiments in rubrene single crystals, where triplet pairs remain entangled for more than 50 ns but quantum beats are suppressed by TID within a few nanoseconds when the magnetic field is misaligned by just a few degrees from specific symmetric directions. Our experiments deliver the zero-field parameters for the rubrene molecule in its orthorhombic lattice and information on triplet-exciton transport, in particular, the triplet-exciton hopping rate between inequivalent sites, which we evaluate to be of the order of 150 ps in rubrene.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electrochemical Processes Breaking Strict Phase Electroneutrality in Microemulsions

Phase electroneutrality is a near-omnipresent assumption in electrochemical reactions. Even media such as biphasic oil-water interfaces and kinetically stable emulsions follow this “rule.” This implies all electron transfer reactions must be accompanied by ion transfer to maintain charge balance within a phase. However, due to the small domain size, electroneutrality is known to break down in the electric double layer adjacent to the electrode. Therefore, the appropriateness of the electroneutrality approximation for media with nanoscale domains, such as microemulsions, is questionable. Here, in this work, we show definitively, for the first time, that phase electroneutrality can be violated during an electron transfer reaction in microemulsions. Cyclic voltammograms show that electrochemical oxidation of rubrene is possible in microemulsions when sodium hydroxide is the only supporting electrolyte. Rubrene is a hydrophobic redox compound that is insoluble in water in neutral and radical cation forms, and hydroxide anions are too hydrophilic to transfer to the oil (toluene) phase. Contrary to observations made in emulsion systems, rubrene oxidation in microemulsions seemingly occurs by a mechanism where coupled ion transfer required for rigorous phase electroneutrality is negated. Our results demonstrate that electron transfer reactions within nanometer-sized domains are not subject to restrictions that govern systems with larger domains.

Barth, Brian A. [Univ. of Tennessee, Knoxville, TN↗

Band-like Charge Photogeneration at a Crystalline Organic Donor/Acceptor Interface

Organic photovoltaic cells possess desirable practical characteristics, such as the potential for low-cost fabrication on flexible substrates, but they lag behind their inorganic counterparts in performance due in part to fundamental energy loss mechanisms, such as overcoming the charge transfer (CT) state binding energy when photogenerated charge is transferred across the donor/acceptor interface. However, recent work has suggested that crystalline interfaces can reduce this binding energy due to enhanced CT state delocalization. Solar cells based on rubrene and C 60 are investigated as an archetypal system because it allows the degree of crystallinity to be moldulated from a highly disordered to highly ordered system. Using a postdeposition annealing method to transform as-deposited amorphous rubrene thin films into ones that are highly crystalline, it is shown that the CT state of a highly crystalline rubrene/C 60 heterojunction undergoes extreme delocalization parallel to the interface leading to a band-like state that exhibits a linear Stark effect. This state parallels the direct charge formation of inorganic solar cells and reduces energetic losses by 220 meV compared with 12 other archetypal heterojunctions reported in the literature.

14 SOLAR ENERGY↗

Surface Doping Boosts Triplet Generation Yield in Perovskite-Sensitized Upconversion

Triplet–triplet annihilation-based photon upconversion (TTA-UC) can efficiently generate higher energy photons at low relative fluences. Bulk metal halide perovskites have offered promise in efficiently sensitizing molecular triplet states in the solid state, necessary for the integration of TTA-UC into device-based applications. Recent work focused on TTA-UC from a rubrene triplet annihilator sensitized by perovskite thin films has established relatively efficient charge extraction from the perovskite, forming the triplet exciton in rubrene. Yet, the specifics underpinning charge transfer at the perovskite/rubrene interface are not fully elucidated. Here, to improve device performance and study the properties governing charge transfer at the interface, various organic solvents are explored to treat the perovskite surface. Scanning tunneling microscopy and spectroscopy show a difference in the electronic band structure, where both n- and p-type terminated perovskite surfaces are observed depending on the solvent used. Supported by optical spectroscopy, the impact of the perovskite electronic structure is monitored, indicating that n-type perovskite sensitizers feature higher TTA-UC efficiencies due to favorable band bending resulting in efficient hole-mediated triplet formation. Overall, the tuning of the electronic structure of the perovskite sensitizer through solvent treatment is shown to be a key force in tuning the mechanism of efficient triplet generation.

36 MATERIALS SCIENCE↗

Enhanced charge transfer by phenyl groups at a rubrene/C{sub 60} interface

Exciton dynamics at an interface between an electron donor, rubrene, and a C{sub 60} acceptor is studied by nonadiabatic quantum molecular dynamics simulation. Simulation results reveal an essential role of the phenyl groups in rubrene in increasing the charge-transfer rate by an order-of-magnitude. The atomistic mechanism of the enhanced charge transfer is found to be the amplification of aromatic breathing modes by the phenyl groups, which causes large fluctuations of electronic excitation energies. These findings provide insight into molecular structure design for efficient solar cells, while explaining recent experimental observations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High performance organic field-effect transistors with ultra-thin HfO{sub 2} gate insulator deposited directly onto the organic semiconductor

We have produced stable organic field-effect transistors (OFETs) with an ultra-thin HfO{sub 2} gate insulator deposited directly on top of rubrene single crystals by atomic layer deposition (ALD). We find that ALD is a gentle deposition process to grow thin films without damaging rubrene single crystals, as results these devices have a negligibly small threshold voltage and are very stable against gate-bias-stress, and the mobility exceeds 1 cm{sup 2}/V s. Moreover, the devices show very little degradation even when kept in air for more than 2 months. These results demonstrate thin HfO{sub 2} layers deposited by ALD to be well suited as high capacitance gate dielectrics in OFETs operating at small gate voltage. In addition, the dielectric layer acts as an effective passivation layer to protect the organic semiconductor.

36 MATERIALS SCIENCE↗

Coherent quantum transport in disordered systems: A unified polaron treatment of hopping and band-like transport

Quantum transport in disordered systems is studied using a polaron-based master equation. The polaron approach is capable of bridging the results from the coherent band-like transport regime governed by the Redfield equation to incoherent hopping transport in the classical regime. A non-monotonic dependence of the diffusion coefficient is observed both as a function of temperature and system-phonon coupling strength. In the band-like transport regime, the diffusion coefficient is shown to be linearly proportional to the system-phonon coupling strength and vanishes at zero coupling due to Anderson localization. In the opposite classical hopping regime, we correctly recover the dynamics described by the Fermi’s Golden Rule and establish that the scaling of the diffusion coefficient depends on the phonon bath relaxation time. In both the hopping and band-like transport regimes, it is demonstrated that at low temperature, the zero-point fluctuations of the bath lead to non-zero transport rates and hence a finite diffusion constant. Application to rubrene and other organic semiconductor materials shows a good agreement with experimental mobility data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultrasensitive organic phototransistors with multispectral response based on thin-film/single-crystal bilayer structures

We report on highly efficient organic phototransistors (OPTs) based on thin-film/single-crystal planar bilayer junctions between 5,6,11,12-tetraphenyltetracene (rubrene) and [6,6]-phenyl-C{sub 61}-butyric acid methyl ester (PC{sub 61}BM). The OPTs show good field-effect characteristics in the dark, with high hole-mobility (4–5 cm{sup 2} V{sup −1} s{sup −1}), low-contact resistance (20 kΩ cm), and low-operating voltage (≤5 V). Excellent sensing capabilities allow for light detection in the 400–750 nm range, with photocurrent/dark current ratio as high as 4 × 10{sup 4}, responsivity on the order of 20 AW{sup −1} at 27 μW cm{sup −2}, and an external quantum efficiency of 52 000%. Photocurrent generation is attributed to enhanced electron and hole transfer at the interface between rubrene and PC{sub 61}BM, and fast response times are observed as a consequence of the high-mobility of the interfaces. The optoelectronic properties exhibited in these OPTs outperform those typically provided by a-Si based devices, enabling future applications where multifunctionality in a single-device is sought.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optically Detected Magnetic Resonance Studies on π-conjugated semiconductor systems

Optically Detected Magnetic Resonance (ODMR) techniques were used to investigate the dynamics of excitons and charge carriers in π-conjugated organic semiconductors. Degradation behavior of the negative spin-1/2 electroluminescence-detected magnetic resonance (ELDMR) was observed in Alq3 devices. The increase in the resonance amplitude implies an increasing bipolaron formation during degradation, which might be the result of growth of charge traps in the device. The same behavior of the negative spin-1/2 ELDMR was observed in 2wt% Rubrene doped Tris(8-hydroxyquinolinato)aluminium (Alq3) devices. However, with increasing injection current, a positive spin-1/2 ELDMR, together with positive spin 1 triplet powder patterns at Δm S =±1 and Δm S =±2, emerges. Due to the similarities in the frequency dependences of single and double modulated ELDMR and the photoluminescence-detected magnetic resonance (PLDMR) results in poly[2-methoxy-5-(2 -ethyl-hexyloxy)-1,4-phenyl ene vinylene] (MEH-PPV) films, the mechanism for this positive spin-1/2 ELDMR was assigned to enhanced triplet-polaron quenching under resonance conditions. The ELDMR in rubrene doped Alq3 devices provides a path to investigate charge distribution in the device under operational conditions. Combining the results of several devices with different carrier blocking properties and the results from transient EL, it was concluded trions not only exist near buffer layer but also exist in the electron transport layer. This TPQ model can also be used to explain the positive spin-1/2 PLDMR in poly(3-hexylthiophene) (P3HT) films at low temperature and in MEH-PPV films at various temperatures up to room temperature. Through quantitative analysis, TE-polaron quenching (TPQ) model is shown having the ability to explain most behaviors of the positive spin-1/2 resonance. Photocurrent detected magnetic resonance (PCDMR) studies on MEH-PPV devices revealed a novel transient resonance signal. The signal may originate from the higher concentration of deep traps near cathode. A quantitative analysis based on this assumption was carried out and found to be consistent with the experimental results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin Coherence at the Nanoscale: Polymer Surfaces and Interfaces

Breakthrough results were achieved during the reporting period in the areas of organic spintronics. (A) For the first time the giant magnetic resistance (GMR) was observed in spin valve with an organic spacer. Thus we demonstrated the ability of organic semiconductors to transport spin in GMR devices using rubrene as a prototype for organic semiconductors. (B) We discovered the electrical bistability and spin valve effect in a ferromagnet /organic semiconductor/ ferromagnet heterojunction. The mechanism of switching between conducting phases and its potential applications were suggested. (C) The ability of V(TCNE) x to inject spin into organic semiconductors such as rubrene was demonstrated for the first time. The mechanisms of spin injection and transport from and into organic magnets as well through organic semiconductors were elucidated. (D) In collaboration with the group of OSU Prof. Johnston-Halperin we reported the successful extraction of spin polarized current from a thin film of the organic-based room temperature ferrimagnetic semiconductor V[TCNE] x and its subsequent injection into a GaAs/AlGaAs light-emitting diode (LED). Thus all basic steps for fabrication of room temperature, light weight, flexible all organic spintronic devices were successfully performed. (E) A new synthesis/processing route for preparation of V(TCNE) x enabling control of interface and film thicknesses at the nanoscale was developed at OSU. Preliminary results show these films are higher quality and what is extremely important they are substantially more air stable than earlier prepared V(TCNE) x . In sum the breakthrough results we achieved in the past two years form the basis of a promising new technology, Multifunctional Flexible Organic-based Spintronics (MFOBS). MFOBS technology enables us fabrication of full function flexible spintronic devices that operate at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronics from Nano-Cell Crystals

This report documents the progress during the past year of a project to uncover the fundamental charge transport mechanisms in organic materials, concentration on crystalline systems and in device configurations. The project has produced solid results in molecular synthesis, crystal growth, electrical and optical characterization. The team has reached out and is collaborating with external groups, and therefore leverages well the DOE funds. Of particular note is the discovery of a method to systematically dope rubrene in a field-effect-transistor device configuration. Previous work in conducting polymers demonstrated orders of magnitude enhancement of conductivity, but in conjunction with changing mobility. For active devices (such as FETs) operation, the mobility must be independent of carrier concentration. We have shown for the first time in an organic system, that the carrier concentration can be changed independently of the FET mobility. Thus we have achieved a similar level of carrier concentration control as is routinely found in inorganic semiconductors. This result will enable the field of organics to proceed faster towards high performance devices for logic and photovoltaic functionality.

01 COAL, LIGNITE, AND PEAT↗

PbS/CdS Core–Shell Quantum Dots Suppress Charge Transfer and Enhance Triplet Transfer

Abstract A sub‐monolayer CdS shell on PbS quantum dots (QDs) enhances triplet energy transfer (TET) by suppressing competitive charge transfer from QDs to molecules. The CdS shell increases the linear photon upconversion quantum yield (QY) from 3.5 % for PbS QDs to 5.0 % for PbS/CdS QDs when functionalized with a tetracene acceptor, 5‐CT . While transient absorption spectroscopy reveals that both PbS and PbS/CdS QDs show the formation of the 5‐CT triplet (with rates of 5.91±0.60 ns −1 and 1.03±0.09 ns −1 respectively), ultrafast hole transfer occurs only from PbS QDs to 5‐CT . Although the CdS shell decreases the TET rate, it enhances TET efficiency from 60.3±6.1 % to 71.8±6.2 % by suppressing hole transfer. Furthermore, the CdS shell prolongs the lifetime of the 5‐CT triplet and thus enhances TET from 5‐CT to the rubrene emitter, further bolstering the upconverison QY.

Huang, Zhiyuan↗

3D Electron Diffraction Structure Determination of Terrylene, a Promising Candidate for Intermolecular Singlet Fission

Herein we demonstrate the prowess of the 3D electron diffraction approach by unveiling the structure of terrylene, the third member in the series of peri-condensed naphthalene analogues, which has eluded structure determination for 65 years. The structure was determined by direct methods using electron diffraction data and corroborated by dispersion-inclusive density functional theory optimizations. Terrylene crystalizes in the monoclinic space group P2 1 /a, arranging in a sandwich-herringbone packing motif, similar to analogous compounds. Having solved the crystal structure, we use many-body perturbation theory to evaluate the excited-state properties of terrylene in the solid-state. We find that terrylene is a promising candidate for intermolecular singlet fission, comparable to tetracene and rubrene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Davis Computational Spectroscopy Workflow—From Structure to Spectra

Here, we describe an automated workflow that connects a series of atomic simulation tools to investigate the relationship between atomic structure, lattice dynamics, materials properties, and inelastic neutron scattering (INS) spectra. Starting from the atomic simulation environment (ASE) as an interface, we demonstrate the use of a selection of calculators, including density functional theory (DFT) and density functional tight binding (DFTB), to optimize the structures and calculate interatomic force constants. We present the use of our workflow to compute the phonon frequencies and eigenvectors, which are required to accurately simulate the INS spectra in crystalline solids like diamond and graphite as well as molecular solids like rubrene. We have also implemented a machine-learning force field based on Chebyshev polynomials called the Chebyshev interaction model for efficient simulation (ChIMES) to improve the accuracy of the DFTB simulations. We then explore the transferability of our DFTB/ChIMES models by comparing simulations derived from different training sets. We show that DFTB/ChIMES demonstrates ~100× reduction in computational expense while retaining most of the accuracy of DFT as well as yielding high accuracy for different materials outside of our training sets. The DFTB/ChIMES method within the workflow expands the possibilities to use simulations to accurately predict materials properties of increasingly complex structures that would be unfeasible with ab initio methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Perovskite-Sensitized Upconversion under Operando Conditions

Perovskite-sensitized upconversion (UC) has resulted in near-infrared-to-visible UC at solar-relevant fluxes. However, the successful implementation of UC devices into operating solar cells will result in exposure to similar environmental stressors as for the commercial photovoltaics (PVs), mainly elevated temperatures, and continuous irradiation. In this article, we investigated the effects of these two stressors, heat and light, on the triplet generation process at the perovskite/rubrene interface. Following exposure to both stressors, local discrepancies across the upconversion device were discovered. Here, the first region showed changes to the morphology, and no detectable upconverted emission was observed. Through the combination of optical microscopy and spectroscopy, crystallization of the organic semiconductor layer, degradation of dibenzotetraphenylperiflanthene, and concurrent degradation of the perovskite sensitizer were found. These effects culminate in a reduction in both triplet generation and triplet–triplet annihilation. In the second region, no changes to the morphology were present and visible UC emission was observed following exposure to both stressors. To probe the triplet sensitization process at elevated temperatures, transient absorption spectroscopy was performed. The presence of the excited spin-triplet state of rubrene at 60 °C highlighted successful triplet generation even at elevated temperatures. This work emphasizes the challenges and continued potential for the integration of perovskite-sensitized UC into commercial photovoltaic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Speed Limit for Triplet-Exciton Transfer in Solid-State PbS Nanocrystal-Sensitized Photon Upconversion

Hybrid interfaces combining inorganic and organic materials underpin the operation of many optoelectronic and photocatalytic systems and allow for innovative approaches to photon up- and down-conversion. However, the mechanism of exchange-mediated energy transfer of spin-triplet excitons across these interfaces remains obscure, particularly when both the macroscopic donor and acceptor are composed of many separately interacting nanoscopic moieties. Here, we study the transfer of excitons from colloidal lead sulfide (PbS) nanocrystals to the spin-triplet state of rubrene molecules. By reducing the length of the carboxylic acid ligands on the nanocrystal surface from 18 to 4 carbon atoms, thinning the effective ligand shell from 13 to 6 Å, we are able to increase the characteristic transfer rate by an order of magnitude. However, we observe that the energy transfer rate asymptotes for shorter separation distances (≤10 Å) which we attribute to the reduced Dexter coupling brought on by the increased effective dielectric constant of these solid-state devices when the aliphatic ligands are short. This implies that the shortest ligands, which hinder long-term colloidal stability, offer little advantage for energy transfer. Indeed, we find that hexanoic acid ligands are already sufficient for near-unity transfer efficiency. Using nanocrystals with these optimal-length ligands in an improved solid-state device structure, we obtain an upconversion efficiency of (7 ± 1)% with excitation at λ = 808 nm.

36 MATERIALS SCIENCE↗