Engineering PapersSearch

SEARCH · Engineering Papers

Results for “Reference Values”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Improvement of scanning radiometer performance by digital reference averaging

Most radiometers utilize a calibration technique in which measurements of a known reference are subtracted from measurements of an unknown source so that common-mode bias errors are cancelled. When a radiometer is scanned over a varying scene, it produces a sequence of outputs, each being proportional to the difference between the reference and the corresponding input. A reference averaging technique is presented that employs a simple digital algorithm which exploits the asymmetry between the time-variable scene inputs and the nominally constant reference input by averaging many reference measurements to decrease the statistical uncertainty in the reference value. This algorithm is, therefore, optimized by an asymmetric chopping sequence in which the scene is viewed for more than one-half of the duty cycle (unlike the analog Dicke technique). Reference averaging algorithms are well within the capabilities of small microprocessors. Although this paper develops the technique for microwave radiometry, it may be beneficial for any system which measures a large number of unknowns relative to a known reference in the presence of slowly varying common-mode errors.

Bremer, J. C.

Analytical design and performance studies of the nuclear light bulb engine

Analytical studies were conducted to investigate in detail the heat balance characteristics of the nuclear light bulb engine. Distributions of energy deposition to all engine components from the fission process, conduction and convection, and thermal radiation were considered. Where uncertainties in basic data or heat transfer characteristics were encountered, ranges of heat loads were calculated and reference values were selected. The influence of these heat loads on engine performance, space radiator requirements, and cooling sequence and cooling circuit designs was determined. The analyses resulted in revisions to the previously reported reference engine characteristics, principally in the heat loads to some engine components and in the cooling sequence. These revisions were incorporated in the engine dynamics digital computer simulation program. No significant changes occurred in the dynamic response of the engine to perturbations in fuel injection rate, reactivity or exhaust nozzle area.

Rodgers, R. J.

The dc power control for a liquid-fed resistojet

A simple breadboard power controller was designed and demonstrated for a new liquid-fed water resistojet. The 1-piece laboratory model thruster has an integrated vaporizer/superheater using a single heating element. Heater temperature was maintained at or near a preset reference value with the closed loop controller providing pulse width modulated (PWM) dc power into the thruster heater. A combined thruster, temperature readout, PWM transfer function was experimentally determined. This transfer function was used to design a proportional plus integral controller that demonstrated zero steady state error, conservative stability margins and adequate transient response to step changes in propellant flow rate, input voltage and temperature reference. Initial turn-on temperature overshoot from room temperature to a 650 C setpoint was 80 C. In addition, EMI was alleviated by reducing heater dI/dt and dV/dt using a simple diode-inductor-capacitor network. Based on limited initial tests, thruster preheat with no propellant flow was necessary to achieve stable system operation during startup. Breadboard power efficiency was 99 percent at 1 kW, and component mass was 0.4 kg excluding the power loss and mass of an input filter required for spacecraft integration.

Gruber, Robert P.

dc power control for a liquid-fed resistojet

A simple breadboard power controller was designed and demonstrated for a new liquid-fed water resistojet. The 1-piece laboratory model thruster has an integrated vaporizer/superheater using a single heating element. Heater temperature was maintained at or near a preset reference value with the closed loop controller providing pulse width modulated (PWM) dc power into the thruster heater. A combined thruster, temperature readout, PWM transfer function was experimentally determined. This transfer function was used to design a proportional plus integral controller that demonstrated zero steady state error, conservative stability margins and adequate transient response to step changes in propellant flow rate, input voltage and temperature reference. Initial turn-on temperature overshoot from room temperature to a 650 C setpoint was 80 C. In addition, EMI was alleviated by reducing heater dI/dt and dV/dt using a simple diode-inductor-capacitor network. Based on limited initial tests, thruster preheat with no propellant flow was necessary to achieve stable system operation during startup. Breadboard power efficiency was 99 percent at 1 kW, and component mass was 0.4 kg excluding the power loss and mass of an input filter required for spacecraft integration.

Gruber, Robert P.

Methods of Attenuation Correction for the TRMM Precipitation Radar Data

The surface reference technique (SRT) has been studied extensively both theoretically and experimentally over the last decade. It is only with the launch of the Tropical Rain Measuring Mission (TRMM) Precipitation Radar, however, that we can begin to test directly whether the technique provides a reliable means of attenuation correction for spaceborne weather radars. Preliminary results indicate that the method yields results that are qualitatively reasonable when the rain rate is moderate or high and when the surface provides a stable reference value. The structure of the normalized radar cross section of the surface (NRCS), however, is highly complex in the sense that the statistics change with background type, incidence angle, location, and season. As a consequence of this, the reliability of the path attenuation estimate is not proportional simply to the amount of rain attenuation but to the rain attenuation relative to the inherent variability of the reference target. To illustrate the behavior of the SRT, several overpasses of the Hurricane Bonnie are shown. We also show that the proper choice of reference data set (spatial, temporal and global) can be critical to the success of the method.

Meneghini, Robert

The radius and ellipticity of Uranus from its occultation of SAO 158687

From occultation timings obtained from the Kuiper Airborne Observatory and from Cape Town for Mar. 10, 1977 occultation of SAO 158687 by Uranus, the equatorial radius, Re, of the planet has been determined to be 26,228 + or - 30 km and its ellipticity epsilon = 1 - Rp/Re = 0.033 + or - 0.007. These values refer to the 1.0 x 10 to the 14th/cu cm number-density level, under the assumption that the upper atmosphere is composed of H2 and He with a mean molecular weight mu = 2.20. The dominant source of uncertainty is the position of the center of the ring system, which was used to define the center of Uranus in our analysis. A rotation rate of 12.8 + or - 1.7 hours for the planet is implied by our value for the ellipticity, under the assumption that Uranus is in hydrostatic equilibrium below the 1.0 x 10 to the 14th/cu cm number density level.

Elliot, J. L.

Bayesian Estimation of Precipitation from Satellite Passive Microwave Observations Using Combined Radar-Radiometer Retrievals

Precipitation estimation from satellite passive microwave radiometer observations is a problem that does not have a unique solution that is insensitive to errors in the input data. Traditionally, to make this problem well posed, a priori information derived from physical models or independent, high-quality observations is incorporated into the solution. In the present study, a database of precipitation profiles and associated brightness temperatures is constructed to serve as a priori information in a passive microwave radiometer algorithm. The precipitation profiles are derived from a Tropical Rainfall Measuring Mission (TRMM) combined radar radiometer algorithm, and the brightness temperatures are TRMM Microwave Imager (TMI) observed. Because the observed brightness temperatures are consistent with those derived from a radiative transfer model embedded in the combined algorithm, the precipitation brightness temperature database is considered to be physically consistent. The database examined here is derived from the analysis of a month-long record of TRMM data that yields more than a million profiles of precipitation and associated brightness temperatures. These profiles are clustered into a tractable number of classes based on the local sea surface temperature, a radiometer-based estimate of the echo-top height (the height beyond which the reflectivity drops below 17 dBZ), and brightness temperature principal components. For each class, the mean precipitation profile, brightness temperature principal components, and probability of occurrence are determined. The precipitation brightness temperature database supports a radiometer-only algorithm that incorporates a Bayesian estimation methodology. In the Bayesian framework, precipitation estimates are weighted averages of the mean precipitation values corresponding to the classes in the database, with the weights being determined according to the similarity between the observed brightness temperature principal components and the brightness temperature principal components of the classes. Because the classes are stratified by the sea surface temperature and the echo-top-height estimator, the number of classes that are considered for retrieval is significantly smaller than the total number of classes, making the algorithm computationally efficient. The radiometer-only algorithm is applied to TMI observations, and precipitation estimates are compared with combined TRMM precipitation radar (PR) TMI reference estimates. The TMI-only algorithm, supported by the empirically derived database, produces estimates that are more consistent with the reference values than the precipitation estimates from the version-6 TRMM facility TMI algorithm. Cloud-resolving model simulations are used to assign a latent heating profile to each precipitation profile in the empirically derived database, making it possible to estimate latent heating using the radiometer-only algorithm. Although the evaluation of latent heating estimates in this study is preliminary, because realistic conditional probability distribution functions are attached to latent heating structures in the algorithm s database, a generally positive impact on latent heating estimation from passive microwave observations is expected.

Grecu, Mircea

Systematic two-dimensional cascade tests. Volume 4: Cascade test data

The data pertaining to the performance characteristics of hydrofoils are presented. The hydrofoils are: (1) double circular arc, (2) multiple circular arc, and (3) slotted doubled circular arc. The experimental data are organized into a systematic presentation format and provided with scale factors and reference values for interpretation. The data include local pressure distributions upstream and downstream of the cascade test section, continuous records from flow angle and total pressure surveys, hydrofoil local pressure distributions, and cavitation data.

Murrin, T. A.

Long-term motion in a restricted problem of rotational motion

A method of general perturbations, based on the use of Lie series to generate approximate canonical transformations, is applied to study the long-term effects of gravity-gradient torque and orbital evolution on the rotational motion of a triaxial, rigid satellite. The center of mass of the satellite is constrained to move in an elliptic orbit about an attracting point mass. The orbit, which has a constant inclination, is constrained to precess and spin with constant rates. The method of general perturbations is used to obtain the Hamiltonian for the nonresonant secular and long-period rotational motion of the satellite to second order in n/omega sub 0, where n is the orbital mean motion of the center of mass and omega sub 0 is a reference value of the magnitude of the satellite's rotational angular velocity. The differential equations derivable from the transformed Hamiltonian are integrable, and the solution for the long-term motion may be expressed in terms of Jacobian elliptic functions and elliptic integrals. Geometrical aspects of the long-term rotational motion are discussed, and a comparison of theoretical results with observations is made.

Cochran, J. E.

An experimental summary of plasma arc exposures of space shuttle high-temperature reusable surface insulation tile array with a single missing tile (conducted at the Ames Research Center)

A space shuttle high temperature reusable surface insulation (HRSI) tile array with a single missing or lost tile was exposed to a hot gas simulated reentry environment to investigate the heating conditions in and around the vicinity of the missing HRSI tile. Heat flux and pressure data for the lost tile condition were obtained by the use of a water cooled lost tile calibration model. The maximum aluminum substrate temperature obtained during the simulated reentry was 128 C (263 F). The lost tile calibration data indicated a maximum heat flux in the lost tile cavity region of 63 percent of the upstream reference value. This test was conducted at the Ames Research Center in the 20 MW semielliptical thermal protection system (TPS) pilot plasma arc test facility.

Galanter, S. A.

Stress-concentration factors for finite orthotropic laminates with a pin-loaded hole

Stresses were calculated for finite size orthotropic laminates loaded by a frictionless steel pin in a circular hole of the same diameter. The calculations were based on finite element analyses for six laminates. Stress concentration factors, based on nominal bearing stress, were determined for wide ranges of the ratios of width to diameter, w/d and edge distance to diameter, e/d. An infinite laminate case was analyzed for each laminate. Orthotropy had a significant influence on the tensile stress concentration at the hole. For example, the stress concentration factors for the infinite laminate cases ranged from 0.82 to 2.16, compared with 0.87 for the quasi-isotropic laminate. The finite widths and edge distances strongly influenced the tensile stress concentration. For the practical range w/d or = 3, the peak tensile stresses were as much as 80% larger than the infinite laminate reference value. For e/d or = 3, these stresses were amplified by as much as 50%. In contrast, the finite width and edge distance had little effect on shear-out and bearing stress concentrations.

Crews, J. H., Jr.

Sm-Nd isotopic evolution of chondrites

The Nd-143/Nd-144 and Sm-147/Nd-144 ratios measured in 5 chondrites and the Juvinas achondrite correlated with the variation of 4.2% in Sm-147/Nd-144. Most of the spread in the range of these ratios results from small heterogeneities in the chondrites and does not reflect the large-scale volumetric averages. A new set of self-consistent reference values were selected for the 'chrondritic uniform reservoir' (CHUR); the new Sm-147/Nd-144 value is 1.6% higher than the previous value assigned to CHUR using the Juvinas data of Lugmair (1975). The new CHUR curve indicates significant changes in model ages for lunar rocks and in the interpretation of early lunar chronology.

Jacobsen, S. B.

Observational, reference and model data on solar EUV, from measurements on AE-E

Information on solar irradiance at wavelengths below 185 nm, observed by the EUVS experiment on the AE-E satellite over the entire development of the present sunspot cycle 21, is important to a variety of investigations of planetary thermospheres and ionospheres. Since strictly observational information is generally lacking in both the completeness and the spectral detail required by the more advanced programs, it has been necessary to develop computer models in connection with fully detailed compilations of an appropriate reference spectrum. The period of July 13-18, 1976, is selected as an observationally reliable AE-E data reference period reflecting solar conditions of minimum activity for solar cycle 21. It is pointed out that the assignments of absolute irradiance-reference values have been drawn for all available sources of information other than that provided by AE-E.

Hinteregger, H. E.

Wing planform effects at supersonic speeds for an advanced fighter configuration

Four advanced fighter configurations, which differed in wing planform and airfoil shape, were investigated in the Langley Unitary Plan Wind Tunnel at Mach numbers of 1.60, 1.80, 2.00, and 2.16. Supersonic data were obtained on the four uncambered wings, which were each attached to a single fighter fuselage. The fuselage geometry varied in cross-sectional shape and had two side-mounted, flow-through, half-axisymmetric inlets. Twin vertical tails were attached to the fuselage. The four planforms tested were a 65 deg delta wing, a combination of a 20 deg trapezoidal wing and a 45 deg horizontal tail, a 70 deg/30 deg cranked wing, and a 70 deg/66 deg crank wing, where the angle values refer to the leading-edge sweep angle of the lifting-surface planform. Planform effects on a single fuselage representative of an advanced fighter aircraft were studied. Results show that the highly swept cranked wings exceeded the aerodynamic performance levels, at low lift coefficients, of the 65 deg delta wing and the 20 deg trapezoidal wing at trimmed and untrimmed conditions.

Wood, R. M.

Sm-Nd isotopic evolution of chondrites and achondrites. II

The chondrite data obtained as a result of an investigation of Sm-147-Nd-143 and Sm-146-Nd142 isotope systematics in five chondrites and the Moama and Andra dos Reis (ADOR) achondrites are consistent with previously reported reference values for the chondritic uniform reservoir (CHUR) of 0.511847 and 0.1967. The Nd-143/Nd-144 and Sm-147/Nd-144 values of the bulk chondrites analyzed suggest that the CHUR evolution is known to within 0.5 epsilon-units and 0.15 percent of the CHUR values for the entire history of the solar system. The Sm-146-Nd-142 systematics of ADOR and Moama support the hypothesis that Sm-146 was present in the early solar system, suggesting a high Sm-146/Sm-144 ratio that cannot be explained as a late injection forma supernova, and must instead be due to galactic nucleosynthesis.

Jacobsen, S. B.

Comparison of longwave diurnal models applied to simulations of the Earth Radiation Budget Experiment

The Earth Radiation Budget Experiment (ERBE) is a multisatellite experiment which is to be implemented in the mid 1980s. The experiment involves a utilization of instruments on one or more sun-synchronous satellites in the NOAA series, and the employment of a dedicated spacecraft, the ERBS, in a 57 deg orbit. One of the objectives of ERBE is related to an improvement of knowledge regarding the diurnal variability in the earth's radiation balance. In the present investigation, satellite samples of longwave (LW) radiation over land are simulated for both sun-synchronous and non-sun-synchronous orbits. Three different LW diurnal models are then applied to the sampled data, and the resulting modeled monthly net LW radiant exitances are compared against reference values based on complete hourly sampling of the area for a month. The results demonstrate the general usefulness of a trigonometric diurnal LW model for land regions with daytime heating trends.

Brooks, D. R.

A proposal for the proper use of pseudopotentials in molecular orbital cluster model studies of chemisorption

The interaction of CO with Cu5, Ni5, and Al4 are treated as model systems for molecular adsorption on metal surfaces. The effect of the use of pseudopotentials for the metal atoms is studied by considering three types of clusters. In the first case, all of the metal electrons are explicitly included in the wave function; an all electron (AE) treatment. In the second case, the metal atom which directly interacts with the CO is described by AE but the remaining metal atoms include a pseudopotential for their core electrons. Finally, in the third case, all of the metal atoms in the cluster have a pseudopotential treatment for the core electrons. The AE cluster results are taken as reference values for the two pseudopotential treatments. The mixed cluster results are in excellent agreement with those of the all AE clusters; however, the results for the all pseudopotential cluster of Ni5CO or of Cu5CO are qualitatively different. The pseudopotential treatment for all of the metal atoms often leads to results that contain serious errors and it is not a reliable approach.

Bagus, P. S.

Mesospheric Winds at Jicamaraca, Peru (12 Deg S, 77 Deg SW), November 19-21, 1981

The altitude of mean zonal wind in the mesosphere during the whole daytime observations is given. Positive value refers to eastward. At around 70 km, wind corresponds to summer easterly, and changes to westerly with increasing altitude above about 77 km. These are fairly compatible with known features of zonal wind at this latitude. Contour plot shows local time variations of zonal wind with daytime mean subtracted and averaged over three days. Shaded area designated westward wind with contour level of 2 m/s. The daily variation is almost in phase with altitude in the 65 to 80 km region. Thus the semidiurnal tide with long vertical wavelength is inferred to exist. Above 80 km, phase tilt occurs which indicates the contribution of the propagating diurnal component. Here the combination of dc and 12-hr component is fitted to the data below 80 km. The altitude profiles of the amplitude and phase of this semidiurnal component are shown.

Aso, T.